VLT 6000 The Real Drive for HVAC HVAC KEYPAD The VLT 6000 s new, user-friendly, HVAC keypad separates the Hand, Off and Auto functions for easy, logical control of the drive. Local control is easily accomplished by simply pressing the HAND START key and controlling the drive s speed using the + and - keys. Running the motor at a locally controlled fixed speed simplifies the balancing of the entire system and can also be useful in case of a loss of the automatic speed control signal. EASY TO SET UP The new, direct-access, Quick Menu allows many installations to be commissioned by simply pressing the Quick Menu key and scrolling through the twelve preset parameters, confirming the HVAC-oriented preset selections. After setting up one drive, the keypad can be used to transfer the same settings to all other VLT 6000 drives. The VLT 6000 is a totally new adjustable frequency drive, with control functions and software designed solely for the unique needs of HVAC systems. EASY TO USE The operational status of the drive can be seen at a glance. A green ON LED illuminates whenever AC power is applied to the drive. A yellow WARNING LED illuminates when the drive is running outside an established limit. The cause of the warning will be identified in the LCD display in plain language. A red ALARM LED indicates that an unsafe operating condition was encountered that caused the drive to shut down, protecting itself and the system. The cause of the alarm shut down will be identified in the LCD display in complete words. EASY TO READ DISPLAY An all new, four line, alphanumeric, backlit LCD display is easy to read from any angle. With three lines of 20 characters and one line of eight double-sized characters, a wide variety of user selectable information can be displayed using complete words and numeric displays with appropriate units.
The Real Drive--for any HVAC Application All VLT 6000s are available with NEMA 1 or NEMA 12 enclosures. A complete line of HVAC option packages are available to meet nearly any HVAC requirement. NEMA 1 All NEMA 1 drives are designed to minimize their width, allowing drives to fit into crowded equipment rooms. Multiple drives can be mounted with no side clearance. Conduit entry is provided on the bottom of all drives. NEMA 12 All NEMA 12 drives are exceptionally compact and affordably priced. Now the increased environmental protection offered by a NEMA 12 enclosure can fit both the equipment room and the budget. Pre-Engineered HVAC Option Package Team up either the NEMA 1 or NEMA 12 drive with a Graham Option Package for a complete HVAC drive. Option Packages can offer three-contactor bypass and many other features. These one-piece, Graham factory-designed and built option packages include the same world-class quality and design standards as the VLT drives. Both the drive and its Option Package carry UL and C-UL certification. NEMA 3R and other enclosures are also available.
Real Drive Feature Real World Benefit Interchangeable keypad All keypads are identical and easily removable. The drive can be operated without a keypad in place Assures tamper-proof operation. Drive status shown even with keypad removed. Keypad can be easily remote mounted The standard keypad can be remotely mounted 10 feet from the drive with a standard 9-pin cable. The remotely mounted keypad is gasketed and carries a NEMA 12 rating. Parameters can be uploaded and downloaded In multiple drive installations, only one keypad needs to be programmed. The settings are stored with the drive. To program multiple drives, upload the parameter settings to the keypad, then place that keypad on each of the other drives and download these same settings to every other drive. Preset typical HVAC defaults Many installations require nothing more than scrolling through the twelve QUICK MENU items to confirm that these defaults are correct. Built-in two setpoint PID controller Can look at two feedback signals, compare with two setpoints and make various process control decisions. Built-in RS-485 Fully equipped for serial communication. Up to 31 drives can be connected to one serial bus up to 5,000 feet long. Built-in N2 and FLN communication Simplified Automatic Energy Optimization (AEO) Communicates directly with Johnson Controls Metasys and Landis & Staefa s System 600 systems with no hardware changes or additional cost. This automatic, dynamic control eliminates the need to select a V/Hz pattern. AEO continually monitors the motor s speed and load and adjusts the applied voltage to maximize energy savings. Even at full speed, voltage will be reduced if the load is less than 100%. This automatically compensates for oversized motors or systems that are not fully loaded. Automatic Motor Adaptation (AMA) test algorithm measures motor stator resistance and reactance Knowing motor stator resistance and reactance, the drive automatically optimizes performance and efficiency. The motor does not have to be run or decoupled from the load for the AMA setup to be performed. Constant torque start assures that the load accelerates to the
Real Drive Feature Real World Benefit Constant torque start and 160% breakaway current available commanded speed. Breakaway current can be set up to 160% for up to 0.5 seconds for breaking away high friction loads. VVC+ Output Switching Pattern Unique digital voltage vector control provides: Nearly perfect output sine wave. Full rated motor voltage at rated frequency. High efficiency for both drive and motor. Full motor performance without derate. Protected from input or output switching Input or output may be disconnected while the drive is running without the need for interlocks to protect the drive. Drive can provide full torque at any selected speed up to base speed Direct driven fans can now be run without derating. The full output torque can be set to coincide with the maximum design operating speed of the driven equipment, up to 60 Hz. Sleep mode Run permissive circuit Automatically stops the drive when its speed drops below the set sleep level for a specified time. Automatically restarts when the speed command exceeds the set wake level. Saves energy and reduces wear on driven components. The ability to accept a system ready signal assures that dampers or other auxiliary equipment are in the proper state for drive operation. Temperature controlled cooling fans All drive cooling fans are controlled by actual heatsink temperature. Drives run as quietly as possible, with minimized losses. UL and C-UL Listed All drives and options sold for US and Canadian applications carry this safety certification. CE Marked, ISO 9001 All drives carry the CE mark for sale into international markets. All drives are built to ISO quality standards.
s Max. Drive Output Current rating of drive must always equal or exceed nameplate running amps of motor(s). 460 V Input 380 V Input Max. Nominal Max. Drive Output HP Output Current 1 2.1 VLT6000H2.1 1½ 3.0 VLT6000H3.0 2 3.4 VLT6000H3.4 3 4.8 VLT6000H4.8 5 8.2 VLT6000H8.2 7½ 11.0 VLT6000H11 10 14 VLT6000H14 15 21 VLT6000H21 20 27 VLT6000H27 25 34 VLT6000H34 30 40 VLT6000H40 40 52 VLT6000H52 50 65 VLT6000H65 60 77 VLT6000H77 75 106 VLT6000H106 100 130 VLT6000H130 125 160 VLT6000H160 150 190 VLT6000H190 200 240 VLT6000H240 250 302 VLT6000H302 300 361 VLT6000H361 Max. Nominal Max. Drive Output KW Output Current 1.1 3.0 VLT6000F3.0 1.5 4.1 VLT6000F4.1 2.2 5.6 VLT6000F5.6 3 7.2 VLT6000F7.2 4 10 VLT6000F10 5.5 13 VLT6000F13 7.5 16 VLT6000F16 11 24 VLT6000F24 15 32 VLT6000F32 18.5 37.5 VLT6000F38 22 44 VLT6000F44 30 61 VLT6000F61 37 73 VLT6000F73 45 90 VLT6000F90 55 106 VLT6000F106 75 147 VLT6000F147 90 177 VLT6000F177 110 212 VLT6000F212 132 260 VLT6000F260 160 315 VLT6000F315 200 368 VLT6000F368 208 V Input 230 V Input Max. Nominal Max. Drive Output HP Output Current 1 4.6 VLT6000C4.6 1½ 6.6 VLT6000C6.6 2 7.5 VLT6000C7.5 3 10.6 VLT6000C11 5 16.7 VLT6000C17 7½ 24.2 VLT6000C24 10 30.8 VLT6000C31 15 46 VLT6000C46 20 59.4 VLT6000C59 25 74.8 VLT6000C75 30 88 VLT6000C88 40 114 VLT6000C114 50 143 VLT6000C143 60 169 VLT6000C169 Max. Nominal Max. Drive Output HP Output Current 1 4.2 VLT6000E4.2 1½ 6.6 VLT6000E6.6 2 7.5 VLT6000E7.5 3 10.6 VLT6000R11 5 16.7 VLT6000E17 7½ 24.2 VLT6000E24 10 30.8 VLT6000E31 15 46 VLT6000E46 20 59.4 VLT6000E59 25 74.8 VLT6000E75 30 88 VLT6000E88 40 104 VLT6000E104 50 130 VLT6000E130 60 154 VLT6000E154
Dimensions Basic Drive, NEMA 1 Drawing 1 Drawing 2 Drawing 3 208 V 380 V 460 V VLT6000C4.6 VLT6000F3.0 VLT6000H2.1 VLT6000C6.6 VLT6000F4.1 VLT6000H3.0 VLT6000C7.5 VLT6000F5.6 VLT6000H3.4 VLT6000F7.2 VLT6000H4.8 VLT6000C11 VLT6000F10 VLT6000H8.2 VLT6000F13 VLT6000H11 VLT6000F16 VLT6000H14 VLT6000C17 VLT6000F24 VLT6000H21 VLT6000C24 VLT6000F32 VLT6000H27 VLT6000C31 VLT6000F38 VLT6000H34 VLT6000C46 VLT6000F44 VLT6000H40 VLT6000C59 VLT6000F61 VLT6000H52 VLT6000C75 VLT6000F73 VLT6000H65 VLT6000C88 VLT6000F90 VLT6000H77 VLT6000C114 VLT6000F106 VLT6000H106 VLT6000C143 VLT6000F147 VLT6000H130 VLT6000C169 VLT6000F177 VLT6000H160 VLT6000F212 VLT6000H190 VLT6000F260 VLT6000H240 VLT6000F315 VLT6000H302 VLT6000F368 VLT6000H361 NEMA 1 Dimensions (inches) H W D a b c d 15.55 8.66 6.30 7.87 0.39 15.12 0.24 15.55 8.66 6.30 7.87 0.39 15.12 0.24 15.55 8.66 6.30 7.87 0.39 15.12 0.24 15.55 8.66 6.30 7.87 0.39 15.12 0.24 15.55 8.66 7.87 7.87 0.39 15.12 0.24 15.55 8.66 7.87 7.87 0.39 15.12 0.24 15.55 8.66 7.87 7.87 0.39 15.12 0.24 22.05 9.53 10.24 7.87 0.83 21.26 0.39 22.05 9.53 10.24 7.87 0.83 21.26 0.39 22.05 9.53 10.24 7.87 0.83 21.26 0.39 27.56 9.53 10.24 7.87 0.83 26.77 0.39 27.56 9.53 10.24 7.87 0.83 26.77 0.39 31.50 12.13 11.65 10.63 0.75 30.71 0.39 31.50 12.13 11.65 10.63 0.75 30.71 0.39 37.52 14.57 13.19 10.63 1.97 30.71 6.42 37.52 14.57 13.19 10.63 1.97 30.71 6.42 37.52 14.57 13.19 10.63 1.97 30.71 6.42 61.14 16.54 16.73 13.78 1.38 54.33 6.42 61.14 16.54 16.73 13.78 1.38 54.33 6.42 61.14 16.54 16.73 13.78 1.38 54.33 6.42 61.14 16.54 16.73 13.78 1.38 54.33 6.42 Weight (lbs) Drawing 17 1 17 1 17 1 18 1 22 1 22 1 22 1 51 2 51 2 51 2 66 2 66 2 106 2 106 2 267 3 267 3 267 3 355 3 355 3 355 3 355 3 Specifications and dimensions subject to change without notice. VLT is a registered Danfoss trademark.
Dimensions Basic Drive, NEMA 12 Drawing 1 Drawing 2 H H Drawing 3 W D W D Drawing 4 208 V 380 V 460 V NEMA 12 Dimensions (inches) H W D a b c d Weight (lbs) Drawing VLT6000C4.6 VLT6000F3.0 VLT6000H2.1 VLT6000C6.6 VLT6000F4.1 VLT6000H3.0 VLT6000C7.5 VLT6000F5.6 VLT6000H3.4 VLT6000F7.2 VLT6000H4.8 VLT6000C11 VLT6000F10 VLT6000H8.2 VLT6000F13 VLT6000H11 VLT6000F16 VLT6000H14 VLT6000C17 VLT6000F24 VLT6000H21 VLT6000C24 VLT6000F32 VLT6000H27 VLT6000C31 VLT6000F38 VLT6000H34 VLT6000F44 VLT6000H40 VLT6000C46 VLT6000F61 VLT6000H52 VLT6000C59 VLT6000F73 VLT6000H65 VLT6000C75 VLT6000F90 VLT6000H77 VLT6000C88 VLT6000C114 VLT6000F106 VLT6000H106 VLT6000C143 VLT6000F147 VLT6000H130 VLT6000C169 VLT6000F177 VLT6000H160 VLT6000F212 VLT6000H190 VLT6000F260 VLT6000H240 VLT6000F315 VLT6000H302 VLT6000F368 VLT6000H361 18.11 11.10 7.68 10.16 0.47 10.24 2.66 18.11 11.10 7.68 10.16 0.47 10.24 2.66 18.11 11.10 7.68 10.16 0.47 10.24 2.66 18.11 11.10 7.68 10.16 0.47 10.24 2.66 20.87 11.10 7.68 10.16 0.47 12.99 2.66 20.87 11.10 7.68 10.16 0.47 12.99 2.66 20.87 11.10 7.68 10.16 0.47 12.99 2.66 31.89 13.98 11.02 12.99 0.47 22.05 2.66 31.89 13.98 11.02 12.99 0.47 22.05 2.66 31.89 13.98 11.02 12.99 0.47 22.05 2.66 31.89 13.98 11.02 12.99 0.47 22.05 2.66 37.01 15.75 11.02 14.76 0.47 27.17 2.66 37.01 15.75 11.02 14.76 0.47 27.17 2.66 37.01 15.75 11.02 14.76 0.47 27.17 2.66 37.01 15.75 11.02 14.76 0.47 27.17 2.66 36.89 19.49 16.57 - - - - 36.89 19.49 16.57 - - - - 36.89 19.49 16.57 - - - - 61.89 19.49 16.73 - - - - 61.89 19.49 16.73 - - - - 61.89 19.49 16.73 - - - - 61.89 19.49 16.73 - - - - 24 1 24 1 24 1 26 1 31 1 31 1 31 1 106 2 106 2 106 2 112 2 134 2 147 2 154 2 154 2 273 3 273 3 273 3 390 4 390 4 390 4 390 4 Specifications and dimensions subject to change without notice. VLT is a registered Danfoss trademark.
Dimensions - Drive with Bypass Enclosure, NEMA 1 208 Volt 460 Volt NEMA 1 Dimensions H W D1 D2 D3 a b c d e f g h j k l m VLT6000C4.6-C11 VLT6000C17-C59 VLT6000C75-C88 VLT6000H2.1-H14 VLT6000H21-H52 VLT6000H65-H77 30.40 24.85 8.59 9.09 10.63 23.35 0.75 28.03 1.64 16.14 7.50 1.75 4.00 6.50 4.50 1.50 12.00 41.28 25.50 10.95 11.45 12.99 24.00 0.75 38.89 1.64 16.14 7.50 1.75 4.00 6.50 4.50 1.50 12.00 50.81 33.41 12.36 12.86 14.41 31.61 0.90 48.35 1.64 21.36 12.00 1.75 4.00 7.00 4.50 1.50 15.00 Dimensions - Drive with bypass enclosure, NEMA 12 208 Volt 460 Volt NEMA 12 Dimensions H W D1 D2 D3 a b c d e f g h j k l m VLT6000C4.6-C11 VLT6000C17-C31 VLT6000C46-C88 VLT6000H2.1-H14 VLT6000H21-H40 VLT6000H52-H77 30.40 27.13 7.77 8.27 9.81 25.63 0.75 28.03 1.64 16.14 7.50 1.75 4.00 6.50 4.50 1.50 12.00 41.28 29.84 11.78 12.28 13.82 28.34 0.75 39.54 1.64 16.14 7.50 1.75 4.00 6.50 4.50 1.50 12.00 50.81 36.98 11.78 12.28 13.82 35.18 0.75 48.35 1.64 21.36 12.00 1.75 4.00 7.00 4.50 1.50 15.00 Specifications and dimensions subject to change without notice. VLT is a registered Danfoss trademark.
Dimensions - Drive with Bypass Enclosure, NEMA 1 208 Volt 460 Volt VLT6000C114-C169 VLT6000H106-H160 The enclosure shown below is required for dual motor or contactor motor selection. All other standard options will fit in the enclosure above. Specifications and dimensions subject to change without notice. VLT is a registered Danfoss trademark.
Dimensions - Drive with Bypass Enclosure, NEMA 1 460 Volt VLT6000H190-H361 The enclosure shown below is required for dual motor or contactor motor selection. All other standard options will fit in the enclosure above. Specifications and dimensions subject to change without notice. VLT is a registered Danfoss trademark.
Dimensions - Drive with Bypass Enclosure, NEMA 12 208 Volt 460 Volt VLT6000C114-C169 VLT6000H106-H160 460 Volt VLT6000H190-H361 Specifications and dimensions subject to change without notice. VLT is a registered Danfoss trademark.
For additional product and company information, visit Graham on the Internet at http://www.grahamdrives.com Division of Danfoss Inc. Box 23880 / 8800 W. Bradley Road Milwaukee, Wisconsin 53223-0880 Phone: 414/355-8800 Fax: 414/355-6117 Toll free: 800/621-8806 E-mail: graham@grahamdrives.com Cat. #6000 5/98