Product Selection Guide For KMC Supervisor, Workbench, Converge, and GFX CONTENTS Introduction... 1 What is KMC AX Supervisor?... 1 What is KMC Workbench?... 1 What is KMC Converge?... 2 What is KMC Converge GFX?... 2 What is KMC Converge Training?... 2 What is -3P?... 2 What is a Host ID and Win ID?... 2 What is the NiCS?... 2 Where Are the KMC Software Downloads?... 2 Applications... 3 KMC Converge Products... 5 KMC Converge (Tool Set for KMC Workbench)... 5 KMC Converge (Tool Set for Third-Party Workbench)... 5 KMC Converge GFX (KMC JACE-Hosted Graphics)... 5 KMC Converge GFX (Third-Party JACE-Hosted Graphics)... 5 KMC Converge GFX (KMC Supervisor-Hosted Graphics)... 5 KMC Converge GFX (Third-Party Supervisor Hosted)... 6 KMC Converge GFX (Third-Party Workbench DEMO)... 6 KMC Workbench with Converge and GFX Embedded (Office DEMO)... 6 KMC Workbench (Job Site)... 6 JACE Embedded Workbench AX...6 Small Building AX Supervisor for Windows... 6 KMC Setup Tools (Configuring, Programming, and Designing)... 7 INTRODUCTION The three application charts on pages 2 and 3 contain terms, which are explained in this introduction. See also KMC Converge Products on page 5 for product descriptions and KMC Setup Tools (Configuring, Programming, and Designing) on page 7 for a summary of other available KMC tools. What is KMC AX Supervisor? The KMC AX Supervisor is a flexible network server used in applications where multiple AX-based JACE controllers can be networked together. The AX Supervisor serves real-time graphical information to standard web-browser clients and also provides server-level functions such as centralized data logging, archiving, alarming, trending, master scheduling, system-wide database management, and integration with enterprise software applications. It can host KMC Workbench. What is KMC Workbench? This is the engineering tool from which the database is developed and various other engineering actions, such as controller configuration and programming, are conducted. Support... 7 KMC Controls, 19476 Industrial Drive, New Paris, IN 46553 / 877-444-5622 / Fax: 574-831-5252 / www.kmccontrols.com
What is KMC Converge? KMC Converge adds functionality to for setting up BACnet controllers from KMC Converge is a tool set that runs in Workbench. It is used to configure and deploy KMC s Application Library and customize programmable KMC BACnet controllers. KMC Converge is installed via two modules: kmcbacnet.jar (controller programming) and kmcconverge.jar (deployment service). See also the data sheet and other documentation for KMC Converge. What is KMC Converge GFX? KMC Converge GFX is a tool set used to configure and generate responsive HTML5 graphics from KMC Converge or any other open brand of the Framework. GFX will automatically generate an HTML5 web interface for controllers that were deployed using KMC s Application Library. The interface may be further customized, adding additional points and navigation. GFX graphics are created in Workbench and hosted on a station. GFX is in addition to the standard graphics included with. KMC Converge GFX is installed via one module: kmcconvergegfx.jar. What is -3P? The -3P in a product part number means Third Party. The -3P products are licensable to open products that were sourced from vendors other than KMC. What is a Host ID and Win ID? For a JACE controller, its Host ID is determined at the factory, and a corresponding license file for that specific JACE is stored on a licensing server. The Win ID is the computer/server version of the JACE Host ID. The Win ID is generated by the Supervisor/ Workbench software the first time it is launched. All Supervisor/ Workbench licenses are bound to that Win ID just like all JACE licenses are bound to the Host ID. (For more information, see documentation.) What is the NiCS? The AX Compatibility Statement (NiCS) is a licensing model in AX that provides OEMs with the ability to define the various levels and types of interoperability their products will support. The statement that can limit what tools can run on a station or what Workbench software can connect to a station. (For more information, see documentation.) Where Are the KMC Software Downloads? These software modules are downloaded from the KMC Partner s web site (partners.kmccontrols.com): KMC Converge and GFX Modules ver xxx.zip (contains Converge and GFX modules) KMC AX Supervisor-Workbench with Converge and GFX Modules ver xxx.zip (contains all KMC product modules) Select Downloads from the menu at the top of the page and then Software from the menu in the right column. The modules require the appropriate licenses and certificates emailed from KMC Customer Service to operate. What is KMC Converge Training? KMC Controls offers training in using KMC Converge. To take a training class, you will need to bring a laptop with an installed version of Workbench with Converge and GFX services. See Training Applications on page 3 for details. See the Training section of the KMC Controls Partners web site for a schedule of classes and additional information. 2
APPLICATIONS TRAINING APPLICATIONS You are... You already have... You want to be able to... You should order... signed up NOT signed up. with a third-party Workbench with an open NiCS. Fully participate in the Connect/Converge training class. KMC Workbench with Converge and GFX Embedded (Office DEMO) on page 6 (P/N KMN-S-ENG-AX-DEMO, licensed to your laptop KMC Converge (Tool Set for Third-Party Workbench) on page 5 (P/N CONVERGE-3P) and KMC Converge GFX (Third-Party Workbench DEMO) on page 6 (P/N CONVERGE- GFX-3P-DEMO, licensed to your laptop Win ID number). PROJECT AND END USER APPLICATIONS You are... You already have... You want to be able to... You should order... signed up End user computer/ server. End user computer/ server licensed for Supervisor software (KMN-S-AX-3, KMN- S-AX-100, or KMN-S- AX-ENT). Have the end user interface configure and program KMC or third-party open NiCS JACEs. Use the Converge tool set with the end user s KMC supervisor software. Use the GFX tool set with the end user s KMC supervisor software. Small Building AX Supervisor for Windows on page 6 (P/N KMN-S-AX-3 for communicating with up to 3 stations, KMN- S-AX-100 for communicating with up to 100 stations, or KMN-S-AX-ENT for communicating with an unlimited number of stations; licensed to the end user s computer/server Win ID number) KMC Converge (Tool Set for KMC Workbench) on page 5 (P/N CONVERGE, licensed to the end user s computer/server KMC Converge GFX (KMC Supervisor-Hosted Graphics) on page 5 (P/N CONVERGE-GFX- SUP, licensed to the end user s computer/server KMC Converge (Tool Set for Third-Party Workbench) on page 5 (P/N: CONVERGE-3P, licensed to the end user s computer/server KMC Converge GFX (Third-Party Supervisor Hosted) on page 6 (P/N CONVERGE-GFX-SUP- 3P, licensed to the end user s computer/server NOT signed up End user computer/ server licensed for third-party Supervisor software. Use the Converge tool set with the end user s third-party Supervisor software. Use the GFX tool set with the end user s third-party supervisor software. For explanations of terms in the application charts, see Introduction on page 1. See also KMC Converge Products on page 5 for product descriptions and KMC Setup Tools (Configuring, Programming, and Designing) on page 7 for a summary of other available KMC tools. 3
TECHNICIAN APPLICATIONS You are... You already have... You want to be able to... You should order.... Configure and program KMC JACEs along with using Converge and GFX Workbench services. KMC Workbench with Converge and GFX Embedded (Office DEMO) on page 6 (P/N KMN-S-ENG- AX-DEMO, licensed to your laptop signed up products from KMC Controls. with KMC Office Demo Workbench (KMN-S- ENG-AX-DEMO). Add KMC BACnet controllers to a KMC JACE as KMC BACnet devices. Deploy applications to the KMC BACnet devices. Configure and program KMC BACnet devices. This will also allow KMC BACnet controller configuration with the JACE embedded Workbench. (You can't compile Control Basic with the JACE embedded Workbench.)** Add KMC BACnet controllers to a third-party JACE with an open NiCS as KMC BACnet devices. Deploy applications to the KMC BACnet devices. Configure and program KMC BACnet devices. This will also allow KMC BACnet controller configuration with the JACE embedded Workbench. (You can't compile Control Basic with the JACE embedded Workbench.)** KMC Converge (Tool Set for KMC Workbench) on page 5 (P/N CON- VERGE, licensed to your JACE Host ID number). KMC Converge (Tool Set for Third-Party Workbench) on page 5 (P/N CONVERGE-3P, licensed to your JACE Host ID number). Add GFX graphics to a KMC JACE. KMC Converge GFX (KMC JACE-Hosted Graphics) on page 5 (P/N CONVERGE-GFX, licensed to your JACE Host ID number). Add GFX Graphics to a third-party JACE with an open NiCS. KMC Converge GFX (Third-Party JACE-Hosted Graphics) on page 5 (P/N CONVERGE-GFX-3P, licensed to your JACE Host ID number). NOT signed up to purchase products from KMC Controls with a third-party Workbench with an open NiCS. with a third-party Workbench licensed for CONVERGE-3P. Use the Converge tool set with your non-kmc or third-party Workbench. Use the GFX tool set with your non-kmc or third-party Workbench. Add KMC BACnet controllers to a third-party JACE with an open NiCS as KMC BACnet devices. Deploy applications to the KMC BACnet devices. Configure and program KMC BACnet devices. This will also allow KMC BACnet controller configuration with the JACE embedded Workbench. (You can t compile Control Basic with the JACE embedded Workbench.)** KMC Converge (Tool Set for Third-Party Workbench) on page 5 (P/N CONVERGE-3P, licensed to your laptop KMC Converge GFX (Third-Party Workbench DEMO) on page 6 (P/N CONVERGE-GFX-3P-DEMO, licensed to your laptop KMC Converge (Tool Set for Third-Party Workbench) on page 5 (P/N CONVERGE-3P, licensed to your JACE Host ID number). with a third-party Workbench licensed for CONVERGE-GFX-3P. Add GFX Graphics to a third-party JACE with an open NiCS. KMC Converge GFX (Third-Party JACE-Hosted Graphics) on page 5 (P/N CONVERGE-GFX-3P, licensed to your JACE Host ID number). ** Control Basic programs may be compiled in KMC controllers using KMC Connect or TotalControl. See documentation on the software and specific controllers for more information. 4
KMC CONVERGE PRODUCTS KMC Converge (Tool Set for KMC Workbench) P/N: CONVERGE Converge application only. Order to add to an existing KMC Workbench. License requires Host ID or Win ID. the web site and install KMC BACnet and KMC Converge.jar files. KMC Converge (Tool Set for Third-Party Workbench) P/N: CONVERGE-3P Converge application only. Order to add to an existing Third- Party Workbench. License requires Host ID. the web site and install KMC BACnet and KMC Converge.jar files. KMC Converge GFX (KMC JACE-Hosted Graphics) P/N: CONVERGE-GFX HTML5 graphics toolset for a KMC JACE, hosted on the JACE. JACE hardware license requires Host ID or Serial Number. Soft JACE license requires Win ID. KMC Converge GFX (Third-Party JACE-Hosted Graphics) P/N: CONVERGE-GFX-3P HTML5 graphics toolset for a Third-Party JACE, hosted on the JACE. JACE hardware license requires Host ID or Serial Number. Soft JACE license requires Win ID. KMC Converge GFX (KMC Supervisor-Hosted Graphics) P/N: CONVERGE-GFX-SUP HTML5 graphics toolset for a KMC Supervisor (Workbench server), hosted on the Supervisor. Supervisor (such as KMN-S-AX-3, KMN-S-AX-100, or KMN-S- AX-ENT). License requires Win ID. 5
KMC Converge GFX (Third-Party Supervisor Hosted) P/N: CONVERGE-GFX-SUP-3P HTML5 graphics tool set for a Third-Party Supervisor (Workbench server), hosted on the Supervisor. License requires Win ID. KMC Converge GFX (Third-Party Workbench DEMO) P/N: CONVERGE-GFX-3P-DEMO For adding KMC Converge GFX to a third-party party Workbench. Third-party Workbench. KMC Workbench with Converge and GFX Embedded (Office DEMO) KMC Workbench (Job Site) P/N: KMN-WB-AX Stand-alone copy of Workbench software for end users who want to engineer stations. It does not support provisioning services. License requires Win ID. Download KMC AX Supervisor-Workbench Converge and GFX Modules ver xxx from the web site and run the setup. JACE Embedded Workbench AX P/N: KMN-WB-AX-WEB Embedded Workbench for a JACE. License requires Host ID. KMC emails relevant licenses and certificates to you. Small Building AX Supervisor for Windows P/N: KMN-S-AX-3 for communicating with up to 3 stations KMN-S-AX-100 for communicating with up to 100 stations KMN-S-AX-ENT for communicating with an unlimited number of stations Licensed to end user computer/server Win ID number. Download KMC AX Supervisor-Workbench Converge and GFX Modules ver xxx from the web site and run the setup. P/N: KMN-S-ENG-AX-DEMO Office Demo is a technician s Workbench tool. All Tridium and KMC drivers and services are licensed, including GFX. This should be purchased to install a JACE or Supervisor on projects. License requires Win ID. Download KMC AX Supervisor-Workbench Converge and GFX Modules ver xxx from the web site and run the setup. 6
KMC SETUP TOOLS (CONFIGURING, PROGRAMMING, AND DESIGNING) KMC CONQUEST CONTROLLER SETUP PROCESS Configuration Programming (Control Basic) Web Page Graphics* KMC CONTROLS TOOL** 4 Conquest STE-9000 Series NetSensor 4 KMC Connect Lite (NFC) app or software*** 4 4 KMC Connect software 4**** 4**** 4 TotalControl software 4 4 KMC Converge module for AX WorkBench 4 KMC Converge GFX module for AX WorkBench *Custom graphical user-interface web pages can be hosted on a remote web server, but not in the controller. **For configuration and programming information, see the documents and Help systems for the respective tool. ***Near Field Communication via enabled smart phone or tablet running the KMC Connect Lite app or a PC (with an HPO-9003 NFC-Bluetooth/USB module/fob) running the KMC Connect Lite Desktop software. ****Full configuration and programming of KMC Conquest controllers is supported starting with TotalControl ver. 4.0. SUPPORT For more information, see the data sheets and other support documents on the respective product series pages on the KMC Controls web site (www.kmccontrols.com). 2016 KMC Controls, Inc. Specifications and design subject 7 to change without notice AG160421A