Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple models if applicable.] HP EliteBook Folio 9480m Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 00/96/EC, Waste Electrical and Electronic Equipment (WEEE)..0 Items Requiring Selective Treatment. Items listed below are classified as requiring selective treatment.. Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Quantity of items Item Description Notes included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) With a surface greater than 0 sq cm Batteries Mercury-containing components Liquid Crystal Displays (LCD) with a surface greater than 00 sq cm All types including standard alkaline and lithium coin or button style batteries For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Includes background illuminated displays with gas discharge lamps 0 Cathode Ray Tubes (CRT) 0 Capacitors / condensers (Containing PCB/PCT) 0 Electrolytic Capacitors / Condensers measuring greater than.5 cm in diameter or height 0 External electrical cables and cords Power cord Gas Discharge Lamps 0 Plastics containing Brominated Flame Retardants weighing > 5 grams (not including PCBs or PCAs already listed as a separate item above) Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent chambers, and service stations. 0 0 EL-MF877-00 Page Template Revision B PSG instructions for this template are available at EL-MF877-0
Components and waste containing asbestos 0 Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 0 0.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Screwdriver # Description # Description #3 Electric cross screwdriver TORX T8 (.3mm) D73 * 3.0 * 0 * 40 Description #4 Description #5 3.0 Product Disassembly Process 3. List the basic steps that should typically be followed to remove components and materials requiring selective treatment:. Follow steps described in Disassembly instruction (file attached). If parts can be removed without using a tool, remove it first 3. Use correct screwdriver and torque value before unlock the screw. 4. 5. 6. 7. 8. 9. 3. Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations). EL-MF877-00 Page Template Revision B PSG instructions for this template are available at EL-MF877-0
MANUFACTURING PROCESS INSTRUCTIONS MECHANICAL ASSEMBLY MODEL :Bandit.0 Sub-assembly name: Document No.: Bandit.0 FA DIS ASS'Y SOP Bandit.0 FA DIS ASS'Y SOP Written by: Stanley Chen Revision: 0. Date: 04/04/8 Page: A. Current station version list Station Ver. Station Ver. Station Ver. Station Ver. 0. 0 0. 9 0. 8 0. 0. 0. 0 0. 9 0. 3 0. 0. 0. 30 0. 4 0. 3 0. 0. 3 0. 5 0. 4 0. 3 0. 3 0. 6 0. 5 0. 4 0. 7 0. 6 0. 5 0. 8 0. 7 0. 6 0. 9 0. 8 0. 7 0. B. Version Modify list Revision Date Station Content Ver. Design 0. 04/04/8 ALL FIRST VERSION 0. Stanley Chen Auditor : Jing-Wen Yang Tabulator:
Document No. : Bandit.0 FA DIS ASS Y SOP Station : (/) Name : Disassemble Battery. Slide the battery release latch to the left.. Disassemble the battery. Qty Qty
Document No. : Bandit.0 FA DIS ASS Y SOP Station : Name : Disassemble HDD Door Ver. : 0. Date : (/) 04/04/8. Loosen HDD door screws, slide the HDD door to the left, then remove the door. Qty Qty Electric cross screwdriver #
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 3(/) Name : Disassemble Service Door 3. Loosen service door screws. (/Fig.). Disassemble the service door. (Fig.3) Fig. Fig.3 Qty Qty Electric cross screwdriver #
Document No. : Bandit.0 FA DIS ASS Y SOP Station : Name : Loosen Keyboard Screws Ver. : 0. Date : 4(/) 04/04/8. Loosen keyboard set screw *4. 3 4 Qty Qty Electric cross screwdriver #
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 5(/) Name : Disassemble Keyboard. Poke the position marked in red with a stick until the keyboard spring out. (). Turn the computer over. Qty Qty
Document No. : Bandit.0 FA DIS ASS Y SOP Station : Name : Disassemble K/B FPC Ver. : 0. Date : 6(/) 04/04/8. Turn the keyboard over. (). Disassemble the FPC. (Fig.) 3. Disassemble the KB membrane and back- lighted FPC, then take out the KB. (Fig.3) Fig. Keyboard Membrane Back-Lighted FPC Fig.3 Qty Qty
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 7(/) Name : Disassemble DDR. Remove the DDR. Qty Qty
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 8(/) Name : Disassemble HDD 4. Loosen HDD screw *4.. Pull up the HDD. 3 Qty Qty Electric cross screwdriver #
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 9(/) Name : Disassemble HDD HDD. Disassemble HDD CNTR. (). Loosen HDD screw *4. (Fig.) Fig. Qty Qty Electric cross screwdriver #
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 0(/) Name : Disassemble WLAN/WWAN Antenna Cable. Disassemble WLAN cable (). With WWAN. Disassemble WWAN cable (Fig.). 5 6 Fig. Qty Qty
Document No. : Bandit.0 FA DIS ASS Y SOP Station : Name : Disassemble WWAN Antenna Cable W/O WWAN (/). Remove Mylar () to pull out the WWAN/WLAN cable from hook (Fig./3). Fig.3 Fig. Qty Qty
Document No. : Bandit.0 FA DIS ASS Y SOP Station : (/) Name : Disassemble WLAN/WWAN/SSD Module. Loosen WLAN screw *. (). With WWAN, loosen WWAN screw *. (Fig.) 3. With SSD, loosen SSD screw *. (Fig.3) 3 Fig. Fig.3 Qty Qty Electric cross screwdriver #
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 3(/) Name : Loosen BTCB Screws. Loosen BTCB screw *5 (). 4 5 3 Qty Qty Electric torx screwdriver T8
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 4(/) Name : Loosen BTCB Screws. Disassemble RTC battery from frame. () Do not remove RTC battery connector from M/B (Fig.).. Loosen BTCB screw *. (Fig.3/Fig.4) RTC battery keep on plugigng. Fig. M*6 M*6 Fig.3 Fig.4 Qty Qty Electric torx screwdriver T8
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 5(/) Name : Loosen BTCB Screws. Loosen BTCB screw *4. 3 4 Qty Qty Electric torx screwdriver T8
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 6(/) Name : Loosen BTCB Screws. Loosen BTCB screw *4. 3 4 Qty Qty Electric torx screwdriver T8
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 7(/) Name : Loosen BTCB Screws. Loosen BTCB screw *4. 4 3 Qty Qty Electric torx screwdriver T8
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 8(/) Name : Disassemble BTCB Frame. Take up the left side of frame, and pull it to the left.. Remove the BTCB. Qty Qty
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 9(/) Name : Disassemble AC Jack. Take out the DC-in cable on the right side.. Disassemble the CNTR, and remove the cable. Qty Qty
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 0(/) Name : Disassemble LVDS CNTR. Rip the transparent tape on CNTR, hold the LVDS by two hands, pull out the CNTR, and pull the cable from routing rib. Qty Qty
Document No. : Bandit.0 FA DIS ASS Y SOP Station : (/) Name : Disassemble Fan Module. Disassemble fan module CNTR. (). Loosen fan screw *, and remove the fan. (Fig.) Fig. Qty Qty Electric cross screwdriver #
Document No. : Bandit.0 FA DIS ASS Y SOP Station : (/) Name : Disassemble Smartcard FFC CNTR. Disassemble smart card CNTR, separate the FPC from TPCB. Qty Qty
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 3(/) Name : Disassemble FPR. Rip the FPR. (red dotted line) Qty Qty
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 4(/) Name : Loosen M/B Screws. Disassemble the Speaker CNTR. (/ Fig.). Loosen MB screw *. (Fig.3) Fig. Fig.3 Qty Qty Electric cross screwdriver #
Document No. : Bandit.0 FA DIS ASS Y SOP Station : Name : Disassemble M/B. Rotate the computer 80, and the touch pad module is at the other side. 5(/). Take up the right side of M/B, and take out the M/B slowly (). Qty Qty
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 6(/) Name : Disassemble LVDS Cable. Rip the tape marked in red, and pull out the LVDS cable (). Qty Qty
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 7(/) Name : Disassemble Thermal Module 3. Loosen thermal module screw *4. * the sequence of disassembly process is described on the fig.. 4 Qty Qty Electric cross screwdriver #
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 8(/) Name : Disassemble Smart card FFC and FPR FFC. Disassemble smart card FFC and FPR FFC (). Qty Qty
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 9(/) Name : Loosen Hinge Screws. Loosen hinge screws (/), and disassemble the LCM. 3 4 Fig. Qty Qty Electric torx screwdriver T8
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 30(/) Name : Disassemble Speaker-L. Disassemble speaker-l cable. (). Loosen speaker-l screw *. (Fig.) Fig. Qty Qty Electric cross screwdriver #
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 30(/) Name : Disassemble Speaker-R. Disassemble speaker-r cable. (). Loosen speaker-r screw * in sequence. (Fig.) Fig. Qty Qty Electric cross screwdriver #
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 3(/) Name : Disassemble Smart card/b. Disassembly Smartcard/B FFC. Loosen smart card screw *, and remove the smartcard/b. (Fig.) Fig. Qty Qty Electric cross screwdriver #
Document No. : Bandit.0 FA DIS ASS Y SOP Station : 3(/) Name : Disassemble TP Bracket. Disassemble TP FFC. (). Loosen TP screw * in sequence, and remove the TP Bracket. (Fig.) Fig. Qty Qty Electric cross screwdriver #