Panel mount devices can be installed directly on the main electrical panel or equipment disconnect. Devices range from 100,000 to 400,000 surge Amp capacity and are available in 4, 7 and 10 mode configurations. A variety of enclosures and diagnostic options are available including light-emitting diode (LED) visual indicators. Modules virtually eliminate down-time. 5, 7 and 10 mode configurations available with internal & external 200 kaic fused disconnects, red/green diagnostic LED s, audible alarm, digital surge counter, NEMA 4 & NEMA 4X stainless steel enclosures. All units come standard with pop out replaceable modules by mode. Equipment level protection for AC/DC network cable, data and low voltage applications. Available in din-rail and direct inline installation. Modules can be mounted directly into equipment cabinets or can be custom configured in a variety of enclosures.
UL 1449 Listed 4th Edition type 1 for installation on the service entrance or main electrical panel. Common mode suppression with 160,000 Surge Amp capacity and Light-emitting diode (LED) visual indicator for transfer switch protection status. Flush mount plate option available for finished walls. Main panel, Sub Panel & Point of use Applications Up to 200 KAIC fault current rating. Status LED s audible alarm and dry contacts available 80,000 to 300,000 surge Amps in all single and three phase. Nema 01,04 & 04X Stainless enclosures. UL 1449 4th Edition Type 1 Listed Common mode suppression. 150,000 or 200,000 Amps per phase, NEMA 4 enclosure, 65 & 200 kaic, LED s each phase, 7 mode protection, dry contacts, 10 year warranty. Also available in a NEMA 4X enclosure with internal/external fused disconnect and surge counter. Devices are UL 1449 4th Edition and include UL 1283 listing. The Hurricane 3000 Series provides a 200,000 KAIC fault current rating making it suitable for installation at the main service entrance and branch panels. This series is available in 100 ka, 200 ka and 300 ka models and is available in all WYE and Delta voltage configurations. 300,000 Amps per phase, NEMA 4 enclosure, LED s each phase, 10 mode protection, dry contacts, push to test diagnostics, surge counter. Also available in a NEMA 4X enclosure with internal/external fused disconnect and surge counter. The MS Series is a high-performance UL 1449 Listed Type 1 SPD designed for critical panels located in the harshest environments. The MS Series is available for all single & three phase configurations up to 600 Vac. 100,000, 200,000, or 300,000 surge Amp capacity. Available as individual models, pre-assembled bar assemblies and Dinrail. This device is trusted by the oil and Telecom industries to protect their most critical equipment in vulnerable locations. 100,000 to 600,000 Amps per phase, replaceable modules by mode. Available in NEMA 1, 4, 4X and stainless steel. Full diagnostics including red-green LED s, dry contacts, audible alarm, surge counter, internal/external fused disconnect. This LED Lighting Surge Protection Device is small enough to fit inside electrical fixture. All devices feature thermal protection which maximizes its efficiency and a LED indicator light that confirms protection is active. 40,000-150,000 surge Amp capacity modules can be combined and configured for almost any requirement. Small footprint allows for internal mounting. Modules include visual end of life indicators and form C dry contacts for remote monitoring. 40,000 surge Amp capacity plug and play Ethernet protection. POE or standard configuration available for a broad range of surge protection applications. Designed to protect sensitive data-monitoring equipment from transient over voltages.
UL 1449 4th Edition listed Common mode suppression with 160,000 Surge Amp Capacity Thermal fused metal oxide varistor (MOV) suppression technology Light-emitting diode (LED) visual indicator for transfer switch protection status NEMA 4 outdoor rated enclosure Available in maximum surge current capacity of 160kA Flush mount plate option available for finished walls Type 4 Enclosure suitable for transfer switches installed inside or outdoors Provides whole house surge protection Surge protection devices with extended operating temperature and the versatility of either a NEMA 1 indoor or NEMA 4 outdoor rated enclosure. The device provides robust protection for the whole home against damaging electrical surges and spikes. Residential Telecommunications Light commercial applications
Surge Protection Device (SPD) Type to UL Operating AC voltage Maximum continuous operating AC voltage (MCOV) Line-Neutral Line-Ground Neutral-Ground Line-Line Nominal discharge current [In] Maximum surge current capacity [I max ] Fault current rating (SCCR) Voltage protection rating (VPR) Suppression technology Line-Neutral Line-Ground Neutral-Ground Line-Line Line-Neutral Line-Ground Neutral-Ground Line-Line Connection terminal (suppression) hardwired Operating temperature ( C) º º Enclosure type (Outdoor) Enclosure dimension (LxWxH) Weight
UL 1449 4th Edition listed EMI/RFI filtering Thermally fused MOV s Common mode suppression Visual and remote verification of protection status Surge current capacity up to 200 ka 8/20μs UL 1449 4th Edition listed Advanced SAD/MOV coordinated hybrid technology Thermally fused MOVs Common mode suppression Visual and remote verification of protection status Surge current capacity up to 200 ka 8/20μs
1Φ 120 2W+G 200 Kaic Type 2 600 V 1000 V 600 V 1Φ 120/240 3W+G 200 Kaic Type 2 600 V 1000 V 600 V 1000 V 3Φ 208/120Y 4W+G 200 Kaic Type 2 600 V 1000 V 600 V 1000 V 1Φ 120/240 3W+G 200 Kaic Type 2 600 V 1200 V 700 V 1200 V 3Φ 208/120Y 4W+G 200 Kaic Type 2 600 V 1000 V 700 V 1200 V 1Φ 120/240 3W+G 200 Kaic Type 2 500 V 800 V 600 V 700 V GS-07F-0435V Certified to ISO 9001:2000
The PSP Vortexx AMV Series features All-Mode AC surge suppression solutions with sine wave tracking circuitry for EMI/RFI filtering. Available in a variety of service voltage configurations, the AMV Series is the ideal choice when applications require all-mode suppression and filtering capabilities. The AMV Series utilizes metal oxide varistors (MOVs) to protect your sensitive electronic equipment from the devastating effects of transient voltage surges. Each phase includes an LED status indicator to show protection status. LED on indicates suppressor is functional. LED off indicates suppressor or AC power failure. Form C contacts are standard. UL 1449 4th Edition listed UL 1283 listed Form C relay contacts included Push-to-test diagnostics EMI/ RFI filtering sine wave tracking circuitry Individual thermal fusing and MOV components Fused disconnect option 10 Year Warranty Max Surge Current/Phase - 300,000 Amps/Phase Operating Temperature: -40º C to +80 C Form C Contact Connection: Terminal Block (#18-#22 AWG wires) Suppression Connection - Hardwire (pigtail wires, #10 AWG), 18 minimum (other lenghts available) Sine wave tracking circuitry
1Φ 120/240 3W+G 200kA with 30Amp Breaker Type 2 600V 600V 600V 900V 1Φ 127/220 3W+G 200kA with 30Amp Breaker Type 2 700V 700V 700V 1000V 3Φ 208/120Y 4W+G 200kA with 30Amp Breaker Type 2 600V 700V 700V 800V 3Φ 220/127Y 4W+G 200kA with 30Amp Breaker Type 2 700V 700V 700V 1000V 3Φ 240/120D 4W+G High Leg Delta 200kA with 30Amp Breaker Type 2 900V 900V 800V 1200V 1000V 1200V 1000V 3Φ 480/277Y 4W+G 200kA with 30Amp Breaker Type 2 1500V 1500V 1800V 1200V 3Φ 480/277Y 3W+G 200kA with 30Amp Breaker Type 2 1500V 1200V GS-07F-0435V Certified to ISO 9001:2000
Small footprint, nipple or bracket installation 75 ka [I max ] surge capacity Thermally protected MOV with dual gas tube technology UL 1449 4th Edition In 10 ka Type 4X indoor/outdoor enclosure Light emitting diode (LED) diagnostic indicator Lifetime warranty UL listed as surge protection device type Operating voltage Maximum continuous voltage (MCOV) Nominal discharge current [I n ] Maximum surge capacity [I max ] Voltage protection rating (VPR) Suppression technology Operating temperature ( C) º º Connection terminals Standards
UL 1449 Type 4 CA and IEC/EN 61643 11 T2 standards With thermal protection One port and two port optional Two port SPD can disconnect the power line when abnormal situation happens Failure indication optional [I n ]: 5kA, 10kA [I max ]: 10kA, 15kA, 25kA GDT for common mode optional Rated voltage: 120V, 277V, 347V, 480V 14 AWG wire, lower clamping voltage IP 66 Agency Approvals: UL, cul, UL EU, DEMKO, CE, CB Design for UL 1449 Type 4 CA With thermal protection Two port product apply to waterproof connector Failure indication or signal indication or none [I n ]: 5 ka [I max ]: 10kA One port and two port optional Rated operating voltage: 120V, 277V, 347V, 480V GDT for common mode optional IP 66
New patented 7 pin connector with ground connection and plug-in surge protection Surge protection for LED Outdoor Lighting Installations Plug-in Surge Protection Device attaches perfectly to the 7 pin Connector for maximum protection against transients and over voltages Comply with UL 1449, ANSI C136.2-2015, ANSI C136.41, ANSI C136.10 All-mode protection (L-N, L-G, N-G) Unique grounding design In 10kA, Imax 15kA, 20kA Series Connection can be customized
New Patented 7 pin connector with built-in surge protection for outdoor LED lighting installations Series and Parallel connections optional Provides Surge Protection for LED lighting All-mode protection (L-N, L-G, N-G) Unique grounding design In 10kA, Imax 15kA, 20kA Comply with UL 1449, ANSI C136.2-2015, ANSI C136.41, ANSI C136.10 New patented plug-in surge protection device with ground connection Provides surge protection for LED Outdoor Lighting Installations Plug-in Surge Protection Device perfectly attaches to 7 pin Connector for maximum protection against transients and over voltages Comply with UL 1449, ANSI C136.2-2015, ANSI C136.41, ANSI C136.10 All-mode protection (L-N, L-G, N-G) Unique grounding design In 10kA, Imax 15kA, 20kA Series and Parallel connections optional
Imax 100kA 8/20 µs UL 1449 4th Edition Type 1 Listed Common mode suppression Thermal fused metal oxide varistor (MOV) suppression with in series Gas-Tube technology for maximum surge protection and zero leakage Light emitting diode s (LED) visual protection status indicator Real time diagnostics by LED per phase and audible alarm Available in maximum surge current capacity of 100,000 surge Amps Indoor/Outdoor IP66 NEMA 6 rated enclosure (NEMA 6 exceeds NEMA 4 or 4X) In 20 ka (All models) SCCR 200 ka (All models) Meets requirements of UL 96A Lighting Protection Master Label Available in a variety of voltages ranging from 120 to 600 volts AC in Hardwired connection #12 AWG 36 leads Audible Alarm protection status indicator Lifetime free replacement warranty
System voltage 120-208 120 480 System 4W+G (Wye) 2W+G (Single) 3W+G (Delta) Maximum operating voltage 140 140 550 140 140 / 120 120 / 240 / 560 Operating current Follow current Short circuit current rating Maximum Leakage current Maximum recommended fuse Frequency Nominal discharge current Maximum discharge current ka Total maximal discharge current total Total maximal discharge current total 15 8 12 Voltage protection level 700 700 N / A 1200 N / A 2500 Shipping dimensions Shipping weight Standard s compliance or recongn Visual indicator Sound Disconnection Indicator Wiring type Maximum Altitude Operating Temperature Housing enclosure material Mounting type Environmental rating Nema rating Location installation
The Hurricane 3000 Series Surge Suppression device is the culmination of years of technological research and innovation. The Hurricane 3000 provides state of the art protection in 100, 200 and 300 ka/phase configurations. Adaptable to many different voltages and Delta and WYE configurations, the Hurricane 3000 is suitable for almost any TVSS need or environment. The Hurricane 3000 provides protection in all modes, L-N, L-G, N-G AND L-L plus noise filtration up to -50dB. Its robust yet compact NEMA 4 metal enclosure is suitable for both indoor and outdoor installations. Utilizing high-energy MOVs and EMI/RFI filtering, the Hurricane 3000 will protect against transients originating from induced lightning strikes, utility switching or internal motor operation. The Hurricane 3000 s internal SCCR (Short Circuit Current Rating) of 200 ka makes it capable of being installed in both service and branch panel applications without the need for cumbersome inline fusing. UL 1449 4th Edition listed cul listed Multiple International Listings 4 Levels of Protection LED Status Indicators Audible Alarm NO/NC Dry Contacts NEMA 4 - (Nipple Product) NEMA 4X (option) Noise Filtration Sine Wave Tracking Circuitry 200 kaic Fault Current Rated Surge Counter (option) Integral Fused Disconnect (option) 10 Year Warranty Nominal Line Voltage 120/208 277/480 347/600 220/380 MCOV 150 V 350 V 480 V 250 V Voltage Protection Rating (VPR) Per UL 1449, 4th Ed. 600 V 1200 V 1500 V 900 V Let Through Voltage Level for Surge Current 10 ka (8/20) (IEEE C62.41-1) 405 V 930 V 1260 V 800 V
50 / 60 / 400 HZ -40 TO +185 F (-10 TO +85 C) Up to -50dB all models 200,000 kaic fusing/mode 5,000 CAT C3 surges without drift Compliant Yes L-N, L-G, N-G, L-L Yes Form C dry contacts #10 AWG, 24 leads < 5 nanoseconds 10 years 3 models 100,000 amps/phase - 50,000 amps/mode 200,000 amps/phase - 100,000 amps/mode 300,000 amps/phase - 150,000 amps/mode Fused safety disconnect Nipple product; NEMA 4. Hardwire; NEMA 4X/NEMA 1 Optional on all models #10 AWG wires NEMA 4 - Terminals #10- NEMA 4 = 4 lbs; NEMA 4X Hardwired w/o disconnect = 15 lbs NEMA 4X Hardwired w/disconnect = 16 lbs Flush mount 15 lbs Green status LED s per phase with audible alarm & dry contacts Stainless steel, flush mount, NEMA 1 *Drawing not to scale
Listed UL Type 1 Surge Protective Device Imax 300/400 ka per phase UL 1449 4th Edition Smart Diagnostic Indicating Remaining Surge Capacity Protects All Modes Optional UL 1283 Electromagnetic Interference Filter Optional Surge Counter All Environmental Ratings Available In 20kA (All models and all modes) SCCR 200kA (All models) VPR L-N is 700V for 120V, 120/240V, 120/208V Real-Time LED indicators, Audible Alarm, Remote Contacts The Hurricane 4000 Series is a high-performance UL 1449 Listed Type 1 SPD designed for critical panels located in the harshest environments. The Surge Protective Device (SPD) achieves the highest UL performance ratings for the Nominal Discharge Current (In) and High Current (SCCR) tests while providing a low Voltage Protection Rating (VPR). It is ideally suited for all NEC compliant locations including a UL96A Master Label Lighting Protection System and thus can be deployed with complete confidence. In addition to its rugged performance, the Hurricane 4000 Series has a new Smart-Diagnostic system that includes a multi-stage LED to indicate the exact level of protection present per phase, an audible alarm, remote signal contacts and an optional surge counter. The Hurricane 4000 Series is available for all single & three phase configurations up to 600Vac and is housed in a NEMA 4/12 rated metal enclosure or NEMA 4X stainless steel option. High energy varistor Thermally Protected
System voltage System 120/208 Vac Wye 3Ph+N+G 277/480Vac Wye 3Ph+N+G 347/600 Vac Wye 3Ph+N+G 240 Vac Delta 3Ph+G Maximum Operating Voltage L-G 150 320 550 320 L-N 150 320 550 - N-G 150 320 550 - L-L 300 640 1100 640 Operating Current ma 10 ma 10 ma <10 ma <30 ma Follow Current A Maximum Leakage Current ma Max. Recommended fuse if any Frequency Hz Nominal discharge current per mode ka Maximum Discharge Current per phase Impulse Discharge Current per phase ka Total Maximal Discharge Current ka Total Maximal Discharge Current ka Let through Voltage L-G L-N N-G L-L Voltage Protection Rating L-G 700 1200 1800 1200 L-N 700 1000 1800 - N-G 700 1000 1800 - L-L 1000 1800 3000 1800 Short Circuit Current Rating ka Standard s Compliance or recognition RFI Filtering Thermal disconnector Overload disconnector Failure indicators Operating Temperature F Housing Enclosure material Mounting type Environmental rating IP Nema Location Installation
UL 1449 4th Edition Listed cul Listed LED Status Indicators Audible Alarm Push to Test NO/NC Dry Contacts NEMA 4 & Nema 4X Enclosure Noise Filtering Sine Wave Tracking Circuitry Fused Safety Disconnect Switch (Option) Available in 4-7 & 10 Mode Design Heavy Duty Modular Construction Individual Modules Replaceable by Mode Digital Surge Counter 10 Year Warranty The Hurricane 5000 Series Surge Suppressors provide high risk surge suppression capability at your facility s service entrance for both conducted (10/350 μs) and induced (8/20 μs) transient over voltages originating from such sources as lightning strikes and utility switching. These protectors incorporate reliable high intensity replaceable modules (per mode) with individually monitored and fused MOVs. Designed to various national and international standards, the Hurricane 5000 Series products are ideal as a global protection solution. The Hurricane 5000 Series products come in 4 models, 100,000 amp, 200,000 amp, 400,000 amp and 600,000 amp, and are versatile and scaleable to meet an array of engineering designs. The Hurricane 5000 Series products are housed in a NEMA 4 enclosure and they come standard with a 200 kaic rating to meet the most demanding needs. Noise filtration up to -50 db is incorporated providing protection in all modes and is available with or without a fused disconnect to meet all applications. Nominal Line Voltage 120/208 277/480 347/600 220/380 MCOV 150V 350 V 480 V 250 V Voltage Protection Rating (VPR) Per UL 1449, 4th Ed. 600V 1200 V 1500 V 900 V Nominal Discharge Current [I n ]: 8/20 20 ka 20 ka 20 ka 20 ka 100 ka 200 ka 400 ka 600 ka
50/60/400 HZ -40 to +160 F (-10 to +70 C) Up to -50dB all models 200,000 kaic 5,000 CAT C3 Surges without Drift Yes Compliant L-N, L-G, N-G, L-L (where applicable) Yes Form C Dry Contacts #10 AWG, 24 leads < 5 nanoseconds 10 years 100,000 amps/phase - 50,000 amps/mode 200,000 amps/phase - 100,000 amps/mode 400,000 amps/phase - 200,000 amps/mode 600,000 amps/phase - 300,000 amps/mode Terminals #10-#2 AWG 100,000 amps/phase = 25 lbs. 200,000 amps/phase = 26 lbs. 400,000 amps/phase = 28 lbs. 600,000 amps/phase = 38 lbs. NEMA 4 and 4X Version Yes Red-Green LED s, Dry Contacts, Audible Alarm, and Push to Test Nema 4X Enclosure - Fused Internal & External Safety Disconnect *Drawings not to scale
Available from 40,000 to 200,000 surge amp capacity. Dry contacts and visual indicators available as well as noise filtration assemblies. The DS70RS is a one pole module that can be configured for both common and differential mode protection in any single and three phase applications to 600V AC. The DS2x0-xxDC surge protector is designed to protect equipment connected to a DC power supply (or AC) against lightning surges. These devices are based on high energy varistors (MOV) matched with the DC operating voltage (from 12 to 350 Vdc). 2 and 4 pair Series Din Rail Surge Protection for Telephone ADSL/SDSL- SHDSL, ISDN, Fipway, Fieldbus-H2, 4-20mA, RS232 & RS485, MIC/T2 10 BaseT Products. Available from 6 to 150 DC voltage. 20,000 surge amp capacity. Pop out field replaceable modules. The P8AX series coaxial surge protectors have been designed to protect antennas, microwaves, broadband applications, two-way radios, cellular, GPS and CATV equipment against lightning surges and electrical transients. With patented gas tube and waterproof. B180/480 series are wall mount DC signal line surge protectors designed to protect your sensitive telephone, data com and instrumentation equipment against harmful lightning surges and electrical transients. Maximum line current is 300 ma. The MJ8 and MJ6-1T Series is designed to protect sensitive data-monitoring equipment connected to various network protocols from transient over voltages. The transient protection circuit is based on high energy gas discharge tubes (GDT). Photovoltaic Surge Protectors 500 to 1000 Volts DC with 40,000 Amps Imax. Type 1 UL 1CA DC SPD with High Energy MOV s, Imax 40 ka modular design with UL 1449 4th edition listing. Modular design for ease of maintenance. Z6-6 (2P) Surge Stopper United States Navy Shipboard Surge and Noise Suppressor. The PSP Products Model Z6-6 (2P) surge suppressor has been specifically engineered and designed for shipboard use. It is approved for U.S. Navy shipboard use.
DS70RS is a heavy duty AC Surge Protection Device (SPD) for high risk electrical service entrance and branch panel applications. The DS70RS protects against the direct and indirect lightning strikes and large switching transients. They are particularly useful in areas where space is limited. The DS70RS is a one pole module that can be configured for both common and differential mode protection in any single and three phase applications to 600 Vac. The DS70RS has a 70 ka 8/20us surge current rating, low leakage current to ground, no follow current and a low residual clamp voltage. The DS70RS module is din rail mountable with cage terminal connectors for parallel wiring. The DS70RS Series include an integral thermal disconnection compliant to UL-60691, a visual fault indicator, protection redundancy, replaceable modules as well as remote signalization. AC Network UL Max. Operating Voltage (MCOV) TOV Withstand (UT) IEC/UL Nominal Discharge Current [I n ] Max. Discharge Current [I max ] Max. Lightning Current (limp) UL Voltage Protection Rating (VPR) Protection Level at In (Up) UL Short-Circuit Current Rating (SCCR) Leakage Current at MCOV (lc) Connection Mode Follow Current (lf) AC System Thermal Disconnector Overcurrent Protection Dimensions Connection Remote Signal Indicator Mounting Operating Temperature (ºC) Operating Altitude Relative Humidity Enclosure Material Environmental Rating Weight 230/400 V 277/480 V 275 Vac 275 Vac 275 Vac 70 ka - 900 V 1.4 kv 100 kaic <1 ma 480 V 600 V 840 Vac 840 Vac 840 Vac 70 ka - 2500 V 2.5 k V 100 kaic <1 ma
The DS2x0-xxDC surge protector is designed to protect equipment connected to a DC power supply (or AC) against lightning surges. These devices are based on high energy varistors (MOV) matched with the DC operating voltage (from 12 to 350 Vdc). The MOV are equipped with internal thermal disconnectors in order to provide safe end of life. The indication of the disconnection status is provided by a mechanical indicator and is transmitted through a remote signal mechanism. The pluggable module allows an easy and fast maintenance. The DS2x0-xxDC is DIN rail compatible and is connected in parallel on the DC line to be protected. Network voltage (Un) Max. Operating Voltage (Uc) Nominal discharge current [I n ] Maximum discharge current [I max ] Protection level (@ In) (Up) Protective fuses (if necessary) 24 Vdc 38 Vdc 10 ka 20 ka 250 V 20 A 75 Vdc 100 Vdc 20 ka 40 ka 390 V 50 A Network voltage (Un) Max. Operating Voltage (Uc) Nominal discharge current (In) Maximum discharge current (Imax) Protection level (@ In) (Up) Protective fuses (if necessary) 130 Vdc 180 Vdc 20 ka 40 ka 620 V 50 A 280 Vdc 350 Vdc 20 ka 40 ka 1200 V 50 A Thermal Disconnector Dimensions Connection Disconnection indicator Remote signaling Mounting Operating temperature (ºC) Protection class Housing Material NF EN 61643-11 France IEC 61643-1 Intl UL1449 4th Ed. USA/Canada CSA C22.2 No. 8-M1986
2 and 4 pair Series Din Rail Surge Protection for Telephone ADSL/SDSL-SHDSL, ISDN, Fipway, Fieldbus-H2, 4-20mA, RS232 & RS485, MIC/T2 10 BaseT Products. Available from 6 to 150 DC voltage. 20,000 surge amp capacity. Pop out field replaceable modules. Din Rail mounted pluggable surge protector Multiple configurations for all applications Shielded wire protection With or without line cut capabilities 2-pair versions available (DLA2) Multiple grounding options UL 497B listed Removable module for easy maintenance Application ISDN-T0 48V line Leased line 4-20 ma RS422 Nominal Line Voltage (Un) 48 V 24 V 6 V Maximum Line Voltage (Uc) 53 V 28 V 8 V Maximum Line Current 300 ma 300 ma 300 ma Maximum Frequency >3 MHz >3 MHz >3 MHz Protection Level (Up) 8/20µs impulse - 5 ka 70 V 40 V 20 V Nominal Discharge Current [I n ] 8/20µs impulse - 10 times 10 ka 10 ka 10 ka Maximum Discharge Current [I max ] 8/20µs impulse - 1 time 20 ka 20 ka 20 ka Impulse Current (limp) 10/350µs impulse - 2 times 5 ka 5 ka 5 ka End of life Short-circuit Short-circuit Short-circuit Configuration Mounting Operating temperature Wiring Housing material Earth Connection Replacement module Versions NF EN 64643-21 (France) UL 497B (USA) DLA DLA2 6403021 640312 6403011 640311 6401011 640111
The P8AX series coaxial surge protectors have been designed to protect antennas, microwaves, broadband applications, two-way radios, cellular, GPS and CATV equipment against lightning surges and electrical transients. They are a first line of defense for your sensitive equipment. The P8AX series employs a patented gas tube, are waterproof (IP65) and available with three grounding options: M6 ground screw, bulkhead or optional mounting bracket. 20 ka transient amps protection (8/20 μs) 5 ka transient amps protection (10/350 μs) DC Pass to +/-48V VSWR < 1.2 Insertion Loss < 0.1dB Bi-directional, series installed Waterproof Removable GDT Frequency Range DC-5 GHz DC Turn-On (Breakdown) 200-300 V Technology Gas Discharge Tube lnsertion Loss 0.1 db Return Loss 20 db VSWR <1.2:1 lpeak (8/20 μs) 20 ka Max Power 190 W Max current 10 A lmpedance 50 omhs 1 Connection Method Series (bi-directional) Connectors N, TNC, SMA, F, BNC, 7/16 Grounding M6 Screw, Bulkhead, Bracket Connectors N, TNC, SMA, F, BNC, 7/16 Environmental IP65 Rating -50 C to +85 C Operating Altitude M6 Screw, Bulkhead, Bracket Relative Humidity up to 5 to 95% non-condensing, up to 100% Weight 4.4 oz 1 Impedance for F-Type Connector is 75 Ohms.
PB180BL, PB280BL and PB480BL series are wall mount phone line surge protectors designed to protect your sensitive telephone against harmful lightning surges and electrical transients. The PB Series utilizes a hybrid protection circuit consisting of high energy Gas Discharge Tubes (GDTs) and fast clamping diodes that offer an ultra fast response time (<1 ns) and a very high power handling capability of 20kA 8/20μs. These units automatically reset after each surge event. 1, 2, or 4 pair protection units All types of telephone and data lines Removable protection circuit board Wall or surface mount Maximum line current is 300 ma IEC-61643-21 UL4197B 1-pair unit 2-pair unit 4-pair unit Application Configuration protected -PB180BL... -PB280BL... -PB480BL... Nominal line voltage (Un) Max. line voltage (Uc) Max. clamping voltage Protection Level (Up) Nominal discharge current (Up) Max. discharge current [I max ] Lightning Current (limp) Type of diagram End of Life Mounting Dimensions Wiring Housing material
These units are designed to protect sensitive communication terminals (telephone sets, fax, modem, ADSL terminals...) connected to analog or digital telephone lines (PSTN or ADSL) from lightning surges and electrical transients. 1-pair Surge Protector for telephone line (PSTN or ADSL) RJ11 connector in/out Easy installation Wall mounting complies IEC 61643-21 standard GDT: 3-electrode gas tube R: Resistor D: Clamping diode network Application Bandwidth Nominal line voltage (Un) Maximum line voltage (Uc) Residual voltage (Up) Nominal discharge current [I n ] I/O connections Wiring Mounting Grounding
Designed with High Energy MOV s Modular Design for Ease of Maintenance Integrated Status Indicator Window Imax: 40 ka /pole at 8/20μs In: 20 ka /pole at 8/20μs UL 1449 4th Edition Recognized Maximum PV Voltage - Ocstc Protection Mode* Maximum Operating Voltage - Ucpv Current Withstand Short - Circuit - Iscwpv Operating Current to the voltage Ucpv - Icpv Leakage Current to the voltage - Ucpv - Ipe Nominal Discharge Current 15 x 8/20 μs Impulses - [I n ] Maximum Discharge Current 8/20 μs Withstand - [I max ] Protection Level (at In) - Up 600 Vdc 1000 Vdc CM/DM CM/DM 680 Vdc >1000 A 1060 Vdc <1000 A <0.1 ma <0.1 ma <0.1 ma <0.1 ma 20 ka 40 ka 20 ka 40 ka <2.5 kv <3.6 kv Dimensions Connection End of life mode Disconnection indicator Remote Signaling of Disconnection Mounting Operating Temperature Protection Class Housing Material Thermal Disconnector º pren50539-11: Europe UL 1449 4th Edition: USA Type 1CA Type 1CA S50PVS - 500 S50PVS - 600 S50PVS - 800 S50PVS - 1000 (*)CM = Common mode (+/PE or -/PE) - DM = Differential mode (+/-)
The MJ8 Series is designed to protect sensitive data-monitoring equipment connected to various network protocols from transient over voltages. The MJ8 Series surge protector is deployed in a RS- 485 signal network applications with data transmission speeds of up to1000 Mbps. The surge protector is housed in a shielded enclosure with high quality shielded RJ45 jacks. The transient protection circuit is based on high energy gas discharge tubes (GDT) and a network of fast response silicon avalanche diodes (SAD) to achieve sharp clamping of very large surge events. red curve: maximum limit Max. data rate Max. DC supply Pinouts 1000 Mbps 18 Vdc 600 ma (1-2) (3-6) (4-5) (7-8) 1000 Mbps 180 Vdc 600 ma (1-2) (3-6) (4-5) (7-8) Line-Line Line-Ground Input Output Pinout Enclosure Ground connection Standard Compliance
Z6-6 (2P) Surge Stopper United States Navy Shipboard Surge and Noise Suppressor. With technology ahead of its time, the PSP Products Model Z6-6 (2P) shipboard surge suppressor has been specifically engineered and designed for shipboard use. It is approved for U.S. Navy shipboard use. The PSP Products Model Z6-6(2P) is a three-stage 1200 joule protection system that eliminates power surges and spikes, and significantly reduces line noise. The result of applying the Z6-6(2P) to your system is reliable working equipment and accurate data. 6 14/3 SJEOW heavy duty power cord Unconditional Lifetime Warranty Dual thermal fuses on Hot and Neutral 6 Outlets 6 foot 14/3 SJEOW heavy duty power cord 17 x 2 x 2 wide, meets IEE 587-B standard Z6-6 (2P) Z2-6 (2P) Z3-6 (2P) Z4-6 (2P) 2.7 lbs. 2.1 lbs. 2.3 lbs. 2.4 lbs. Filter Modes Filter Range Protection Modes Maximum Surge Joule Rating Response Time Voltage Clamping Beginning clamping Levels Cat A Ring Cat. B Ring Cat C Impulse Operating Temperature (ºC) º º Cont. Duty Rating
120/240 Volt Single Phase WYE 120/208 Volt Three Phase WYE 22 KAIC 200 KAIC 120/240 Split Phase Delta High Leg 277/480 Volt Three Phase WYE 480 Volt Delta 347/600 Volt Three Phase WYE 600 Volt 3 Phase Delta 220/380 Volt Three Phase WYE 240 Volt 3 Phase Delta Straight Nipple (Cooper 651S) With #10 Wire Surface Flush Mount Hardwire Hardwire Hardwire with Disconnect Modular Hardwire Modular Hardwire with Disconnect NEMA 1 Surge Counter NEMA 4 NEMA 4X NEMA 4X Stainless Steel Hurricane Series 120/208 Volt Three Phase WYE 100,000 Amps Per Phase 200,000 Amps Per Phase 300,000 Amps Per Phase 400,000 Amps Per Phase 600,000 Amps Per Phase Fault Current 200 KAIC Surge Current 200,000 per phase Enclosure NEMA 4 Connection Straight Nipple with #10 Wire Surge Counter PSP Products Inc. has served the industrial, commercial, utility and residential markets for over twenty five years by providing superior products and services. From our humble beginnings in the office products industry, we have evolved into a forward-thinking company offering innovative products to meet the demand of an ever changing-market. We strongly believe that our customer is our most valuable asset. Unlike many of our larger competitors, we believe in working for our customers and conforming to meet their needs, not ours. We stand ready to assist in any way possible, supporting our customers through challenges and unique/urgent requirements they may encounter.