HSKT TM Technology Specifications

Similar documents
IndoTraq Development Kit 1: Command Reference

TLK10081 EVM Quick Start Guide Texas Instruments Communications Interface Products

1 Photo. 7/15/2014 PMP10283 Rev A Test Results

The photograph below shows the PMP9730 Rev E prototype assembly. This circuit was built on a PMP9730 Rev D PCB.

Stereo Dac Motherboard application information

Wolverine - based microcontrollers. Slashing all MCU power consumption in half

The photographs below show the top and bottom view of the PMP11282Rev A board, which is built on PMP11064 Rev B PCB. Top Side

Test Report PMP Test Data For PMP /20/2015

TIDA V Stepper Motor Controller with Integrated Current Sense Reference Design

Single Cell Battery Power Solution

Protecting the TPS25810 from High Voltage DFPs

TIDA Test Report

Stacking the REF50xx for High-Voltage References

Systems ATE report. All output measurements are taken with 1uF and a 0.1uF MLCC across the DUT output.

TIDA Test Report

TIDA DS125BR820 40GbE/10GbE QSFP Reference Design User s Guide

PMP11140 TPS40400 / CSD85301Q2 Test Report 12V to 1.8V 3A / 4A Texas Instruments

4-Level Strap Device Configuration

HV Solar MPPT DC-DC GUI Overview. Getting Started Guide

System-on-Chip Battery Board User s Guide

DS25BR204 Evaluation Kit

SN65DSI86 SW Examples

XIO1100 NAND-Tree Test

User s Guide for Sonic MDIO Software

UCD3138 Responding to Multiple PMBus Slave Addresses

CUSTOM GOOGLE SEARCH. User Guide. User Guide Page 1

Passing CISPR25-Radiated Emissions Using TPS54160-Q1

DSP/BIOS Link. Platform Guide Published on 20 th JUNE Copyright 2009 Texas Instruments Incorporated.

AC Induction Motor (ACIM) Control Board

INVENTORY HISTORY REPORT EXTENSION. User Guide. User Guide Page 1

ADD RELATED PRODUCTS TO CART. User Guide. User Guide Page 1

WL1271 ini File Description and Parameters User's Guide

Features. Applications

SN54LS169B, SN54S169 SN74LS169B, SN74S169 SYNCHRONOUS 4-BIT UP/DOWN BINARY COUNTERS

INVENTORY REPORT EXTENSION. User Guide. User Guide Page 1

SavvyCube Ecommerce Analytics Connector by MageWorx. User Guide

LMR14050 LMZ20502 LMZ20502

Radiation Tolerant Analog I/O Module KM6782.1

Application Report. 1 System Requirements. 2 Using the DM643x Pin Multiplexing Utility. Bernard Thompson...

NO P.O. BOXES ALLOWED AT CHECKOUT. User Guide. User Guide Page 1

TFP101, TFP201, TFP401, TFP401A 2Pix/Clk Output Mode

IMPORT/EXPORT Newsletter Subscribers. User Guide. User Guide Page 1

Radiation Tolerant Digital I/O Module KM6784.1

Debugging Shared Memory Systems

Hands-On: Implementing an RF link with MSP430 and CC1100

WM8805_6152_DS28_EV1_REV3 Schematic and Layout. WM8805_6152_DS28_EV1_REV3 Schematic and Layout. Customer Information 1 of 18 June 2007, Rev 3.

Design Considerations for Avoiding Timing Errors during High-Speed ADC, High-Speed ADC, LVDS Data Interface with FPGA

Bootstrap Loader (BSL) Scripter User s Guide

AN-2062 LM3549 Evaluation Kit

Application Report. 1 Introduction. MSP430 Applications. Keith Quiring... ABSTRACT

WM CS20-M-REV2

WM DS28-EV1-REV2 Schematic and Layout WOLFSON DEVICE(S):

ez430-rf2480 Sensor Monitor SWRU Low-Power RF

PMC to PCI Express Adapter with JN4 Connector Breakout

WM DT20-EV1. Customer Standalone Board WOLFSON DEVICE(S): DATE: September 2009

PRODUCT DATASHEET. Features. IPNetCam Reference Design on DM365 Product Release 1.5.0, Nov 2009

GUEST CHECKOUT TO REGISTERED CUSTOMERS. User Guide. User Guide Page 1

description VCC 1PRE 1OC 1D1 1C 1Q1 1Q2 1Q3 1Q4 2Q1 2Q2 2Q3 2Q4 2C 2PRE 1D2 1D3 1D4 2D1 2D2 2D3 2D4 2OC GND 1PRE 1OC 1Q1 1D1 1Q2 1Q3 1Q4 1D2 1D3 1D4

Increase Current Drive Using LVDS

WM DS28-EV2-REV1 Schematic and Layout

This document describes the features of the GUI program used to control Power Line Modem with E-Meter Platform.

October 2002 PMP Portable Power SLVU074

WM DT16-EV1. Customer Standalone Board WOLFSON DEVICE(S): DATE: August 2009

UART Bootloader for Hercules TMS570LS04x MCU

Footprint Comment LibRef Designator Description Quantity C1, C2, C3, C5, C6, C7, C8, 0603C Cap Cap. C9, C11, C16, C17, C18, C19, Capacitor 17

GUEST CHECKOUT TO REGISTERED CUSTOMERS

The examples in this application report require the Flash API Modules (SPRC236) within the "Tools & Software" folder.

TCI6616/C6670/TCI6608/C6678 Device Simulator EMAC Model I/O user-guide

IMPORT/EXPORT CUSTOMERS FOR MAGENTO 2. User Guide. User Guide Page 1

TPD3S014-Q1 Evaluation Module

COUNT RefDes Value Description Size Part Number MFR

IMPORT/EXPORT WISH LIST ITEMS FOR MAGENTO 2. User Guide. User Guide Page 1

DRV8833 Evaluation Module. User's Guide

MOSAIC CONTROL DISPLAYS

COMMUNICATIONS WITH THE MULTI- CHANNEL HOST P RT INTERFACE

Using the TMS320C5509 USB Bootloader

Techniques for Profiling on ROM-Based Applications

LM5022 Isolated Flyback Converter

TMS320C6414T/15T/16T Power Consumption Summary

FMC-QSFP+ FEATURES APPLICATIONS SOFTWARE. FMC Module with Dual QSFP+ Ports DESCRIPTION

February 2003 PMP EVMs SLVU081

TMS470R1x External Clock Prescale (ECP) Reference Guide

Power Line Modem with E-Meter Platform Quick Start Guide

FPC401 Quad Port Controller

AN-2245 MSP430 Interface to DAC161P997 Code Library

Application Note AN045

A DSP/BIOS AIC23 Codec Device Driver for the TMS320C6416 DSK

1. Installation Instructions

DS99R124Q-EVK FPD-Link II to FPD-Link Converter Evaluation Kit

FMC-SFP+ FEATURES APPLICATIONS SOFTWARE. FMC Module with Four SFP+ Ports DESCRIPTION

A DSP/BIOS AIC23 Codec Device Driver for the TMS320C5510 DSK

IMPORT/EXPORT URL REWRITES FOR MAGENTO 2. User Guide. User Guide Page 1

Table 1. Proper Termination of Unused (Port) Pins in a Single-Port PSE System

2. With the Evaluation Kit DVD, click the Tools button and then click the Code Composer Studio logo to start the setup program.

TPS62290EVM-279. User's Guide SLVU217 July 2007

HIDE PRODUCT PRICE. User Guide. User Guide Page 1

1. Installation Instructions

Important Notice. All company and brand products and service names are trademarks or registered trademarks of their respective holders.

I2C and the TAS3001C. Introduction. The I2C Protocol. Digital Audio Group ABSTRACT

Micro-Module Integrated Bluetooth 1.2 Baseband Controller and Radio

Transcription:

HSKT TM Technology Specifications September 2018 Page 1 of 6 Copyright 2018, IndoTraq LLC Datasheet v1.3

HSKT This high-speed technology combines 12 axes of information into a tiny package to give a precise location. The location data are available on both the Master Anchor and Tags for reporting purposes. Performance Position Update Frequency: up to 150 Hz High Speed Network Latency: 6 ms (1 tag and 4 anchors) / 10 ms (4 tags and 8 anchors) Super Speed Network Latency: 10ms (with 8 tags and 8 anchors) Distance Precision: ±5 mm Orientation Precision: +-0.06 deg Ultra Wide Band Transceiver Frequency: 3.5 GHz 10 GHz Range: 100 m Indoors / 200 m Outdoors Multiple systems on separate RF channels can occupy the same space. Page 2 of 6 Copyright 2018, IndoTraq LLC Datasheet v1.3

Anchor Internal 2500 mah li-poly 3.7V battery (12hr life - rechargeable) USB communication Wi-Fi communication (Optional for Master Anchor Only*) Bluetooth communication (Optional for Master Anchor Only*). Dimension: Approximately 4 W x 3 H x 1.4 D *must be specified at time of order Page 3 of 6 Copyright 2018, IndoTraq LLC Datasheet v1.3

Tag Can act as Tag role or Anchor role (allows for tiny anhcors) USB communication SPI communication I2C communication Spare IO for your own purpose Internal tag has a small attached antenna as shown below. 500 mah li-poly 3.7V battery (rechargeable) with standard JST connector which is swappable. External tag has U.FL connectors (50 ohm), with 3 cable and omni-direction antenna. Other customer supplied antennas with 50 ohm male SMA connectors can also be tested. Approximately 1.18 W x 1.7 H x 0.25 D without battery. Weighs 7.1 grams. Approximately 1.18 W x 1.7 H x 0.4 D with battery. Weighs 17.8 grams. Page 4 of 6 Copyright 2018, IndoTraq LLC Datasheet v1.3

Antenna Large Circular polarized Directional Approximately 2.4 W x 2.6 H Small Omnidirectional Approximately 1.6 W x 1.2 H IMU Update rate 1000 Hz 9 axis Acceleration, Gyroscope and Magnetometer Battery Life SAMPLE FREQUENCY BATTERY LIFE (500MAH) 200 Hz 2 hour 60 Hz 3.5 hours every 5 seconds 20 hours * * longer battery life available upon request Page 5 of 6 Copyright 2018, IndoTraq LLC Datasheet v1.3

IMPORTANT NOTICE IndoTraq LLC (IT) reserve the right to make corrections, enhancements, improvements and other changes to its products and services, and to discontinue any product or service. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products (also referred to herein as components ) are sold subject to IT s terms and conditions of sale supplied at the time of order acknowledgment. IT warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in IT s terms and conditions. Testing and other quality control techniques are used to the extent IT deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. IT assumes no liability for applications assistance or the design of Buyers products. Buyers are responsible for their products and applications using IT components. To minimize the risks associated with Buyers products and applications, Buyers should provide adequate design and operating safeguards. IT does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which IT components or services are used. Information published by IT regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from IT under the patents or other intellectual property of IT. Reproduction of significant portions of IT information in IT data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. IT is not responsible or liable for such altered of IT components or services with statements different from or beyond the parameters stated by IT for that component or service voids all express and any implied warranties for the associated IT component or service and is an unfair and deceptive business practice. IT is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of IT components in its applications, notwithstanding any applicationsrelated information or support that may be provided by IT. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify IT and its representatives against any damages arising out of the use of any IT components in safety-critical applications. In some cases, IT components may be promoted specifically to facilitate safety-related applications. With such components, IT s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No IT components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those IT components which IT has specifically designated as military grade are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of IT components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. Page 6 of 6 Copyright 2018, IndoTraq LLC Datasheet v1.3