XSP Series XSPR LED Street/Area Luminaire Version A

XSP Series XSPR LED Street/Area Luminaire Version A Product Description In addition to a low initial cost, the XSPR LED Street luminaire maintains the familiar look of the traditional cobrahead design and delivers substantial energy savings while reducing maintenance time and costs. The hassle-free design of the XSPR luminaire includes tool-less entry and +/- 5 fixture leveling for easy installation. Our NanoOptic Precision Delivery rid optic achieves better optical control than traditional street lighting fixtures and efficiently delivers white uniform light for safer-feeling communities. Applications: Roadway, parking lots, walkways and general area spaces Performance Summary NanoOptic Precision Delivery rid optic Made in the U.S.A. of U.S. and imported parts RI: Minimum 70 RI T: (+/- 300K); (+/- 500K) Limited Warranty : 0 years on luminaire/0 years on olorfast Deltauard finish 9.8" (249mm) 4.9" (26mm) Accessories Field-Installed Backlight ontrol Shield XA-SPRBLS - Provides /2 mounting height cutoff 22.3" (567mm) NEMA Photocell Receptacle location (ordered as an option) Weight 3.9 lbs. (6.3kg) Ordering Information Example: BXSPR-A-0FU-S BXSPR A 0 U S Product Version Mounting Optic T Voltage olor Options Options BXSPR A 0 Horizontal Tenon * Type II Long 2* Type II Medium 3* Type III Medium F M 42W 25W U Universal 20-277V S Silver N Utility Label and NEMA Photocell Receptacle External wattage label per ANSI 35 7-pin receptacle per ANSI 36.4 Factory connected 0-0V dim leads Photocell and shorting cap by others * Available with Backlight Shield when ordered with field-installed accessory (see table above) NOTE: Price adder may apply depending on configuration Rev. Date: V3 /7/205

Product Specifications ONSTRUTION & MATERIALS Die cast aluminum housing w/uv stabilized polymeric door for long weathering and reliability Tool-less entry Mounts on 5" IP,.66" (42mm) O.D. or 2" IP, 2.375" (6m) O.D. horizontal tenon (minimum 8" [203mm] in length) and is adjustable +/- 5 to allow for fixture leveling Designed with 0-0V dimming capabilities. ontrols by others Exclusive olorfast Deltauard finish features an E-oat epoxy primer with an ultra-durable silver powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion Weight: 3.9 lbs. (6.3kg) ELETRIAL SYSTEM Voltage: 20-277V, 50/60Hz Factor: > 0.9 at full load Total Harmonic Distortion: < 20% at full load lass 2 driver Integral 0kV surge suppression protection standard To address inrush current, slow blow fuse or type /D breaker should be used 0V Source urrent: 0mA REULATORY & VOLUNTARY QUALIFIATIONS culus Listed Suitable for wet locations ertified to ANSI 36.3-200, 3 bridge and overpass vibration standards Meets ALTrans 6 Vibration testing 0kV surge suppression protection tested in accordance with IEEE/ANSI 62.4 Meets F Part 5 standards for conducted and radiated emissions Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 7 Meets Buy American requirements within ARRA DL qualified. Please refer to www.designlights.org/qpl for most current information RoHS compliant. onsult factory for additional details Electrical Data* Recommended XSPR Version A Series Lumen Maintenance Factors () Ambient 5 (4 F) 0 (50 F) 5 (59 F) 20 (68 F) 25 (77 F) System Watts 20-277V Total urrent 20V 208V 240V 277V 42 0.34 00 0.8 0.6 25 0 0 0.0 0.0 * Electrical data at 25 (77 F). Actual wattage may differ by +/- 0% when operating between 20-277V +/- 0% 25K hr 50K hr 75K hr.04.02.0.00.00.03.0.00 0.99 0.99.02.00 0.99 0.98 0.98.0 0.99 0.98 0.97 0.97.00 0.98 0.97 0.96 0.96 00K hr alculated 3 Lumen maintenance values at 25 (77 F) are calculated per TM-2 based on LM-80 data and in-situ luminaire testing 2 In accordance with IESNA TM-2-, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 3 In accordance with IESNA TM-2-, alculated Values represent time durations that exceed six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip)

Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: www.cree.com/lighting/products/outdoor/streetlights/xsp-series-streetlight 3388 254 20 20 694 847. URB LINE 80 8.3 2 2 2 8.3 2 8.3 Type II Long Distribution 3,648 B U0 3,925 B U0 andlepower Trace: Vertical plane through ESTL Test Report #: 203-052 BXSPR-A-*FU Lumens: 3,579 BXSPR-A-*FU Mounting Height: 25' (7.6m) A.F.. Lumens: 3,648 F at grade 2,46 B U0 2,600 B U0 * delivered lumens at 25 (77 F). Actual production yield may vary between -0 and +0% of initial delivered lumens ** For more information on the IES (Backlight-Uplight-lare) Rating visit: www.ies.org/pdf/erratas/tm-5-bugratingsaddendum.pdf. Valid with no tilt 3380 8.3 Type II Long w/bls Distribution 2535 20 20 690 845 andlepower Trace: Vertical plane through RESTL Test Report #: PL03995-00 BXSPR-A-*MU w/xa-sprbls Lumens: 2,857. URB LINE BXSPR-A-*FU w/ XA-SPRBLS Mounting Height: 25' (7.6m) A.F.. Lumens: 2,655 F at grade 80 2 2 2 8.3 2 8.3 2,655 B0 U 2,857 B0 U,759 B0 U,893 B0 U * delivered lumens at 25 (77 F). Actual production yield may vary between -0 and +0% of initial delivered lumens ** For more information on the IES (Backlight-Uplight-lare) Rating visit: www.ies.org/pdf/erratas/tm-5-bugratingsaddendum.pdf. Valid with no tilt 2 358 2639 20 20 759 880. URB LINE 60 8.3 2 2 2 8.3 2 8.3 Type II Medium Distribution 3,89 B U0 4,09 B U0 andlepower Trace: Vertical plane through ESTL Test Report #: 203-05 BXSPR-A-*-2-FU Lumens: 3,759 BXSPR-A-*-2-FU Mounting Height: 25' (7.6m) A.F.. Lumens: 3,89 F at grade 2,529 B U0 2,722 B U0 * delivered lumens at 25 (77 F). Actual production yield may vary between -0 and +0% of initial delivered lumens ** For more information on the IES (Backlight-Uplight-lare) Rating visit: www.ies.org/pdf/erratas/tm-5-bugratingsaddendum.pdf. Valid with no tilt 3608 8.3 Type II Medium w/bls Distribution 2706 20 20 804 902 andlepower Trace: Vertical plane through RESTL Test Report #: PL03993-00 BXSPR-A-*-2-MU w/xa-sprbls Lumens: 3,097. URB LINE 60 BXSPR-A-*-2-FU w/xa-sprbls Mounting Height: 25' (7.6m) A.F.. Lumens: 2,878 F at grade 2 2 2 8.3 2 8.3 2,878 B0 U 3,097 B0 U,906 B0 U 0 2,052 B0 U * delivered lumens at 25 (77 F). Actual production yield may vary between -0 and +0% of initial delivered lumens ** For more information on the IES (Backlight-Uplight-lare) Rating visit: www.ies.org/pdf/erratas/tm-5-bugratingsaddendum.pdf. Valid with no tilt

Luminaire EPA Horizontal Tenon Mount Weight: 3.9 lbs. (6.3kg) Single 2 @ 90 2 @ 80 3 @ 90 4 @ 90 Tenon onfiguration If used with ree tenons, please add tenon EPA with luminaire EPA PD-H4; PT-H PD-2H4(90); PT-2H(90) PD-2H4(80); PT-2H(80) PD-3H4(90); PT-3H(90) PD-4H4(90); PT-4H(90) 07 0.85.4.42 6 Tenon EPA Part Number EPA PD Series Tenons 0.09 PT Series Tenons 0.0 WM-2L 0.3 XA-TMDA8 0.9 Tenons and Brackets (must specify color) Square Internal Mount Horizontal Tenons (Aluminum) - Mounts to 4" (02mm) square aluminum or steel poles PD-H4 Single PD-3H4(90) 90 Triple PD-2H4(90) 90 Twin PD-4H4(90) 90 Quad PD-2H4(80) 80 Twin Wall Mount Brackets - Mounts to wall or roof WM-2L Extended Horizontal Round External Mount Horizontal Tenons (Aluminum) - Mounts to 2.375"-3" (60-76mm) O.D. round aluminum or steel poles or tenons PT-H Single PT-3H(90) 90 Triple PT-2H(90) 90 Twin PT-4H(90) 90 Quad PT-2H(80) 80 Twin Direct Arm Pole Adaptor Bracket - Mounts to 3-6" (76-52mm) round or square aluminum or steel poles XA-TMDA8 Refer to the Bracket and Tenons spec sheet for more details 205 ree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. ontent is subject to change. Patent www.cree.com/patents. ree, NanoOptic, and olorfast Deltauard are registered trademarks, and the ree logo, Precision Delivery rid and XSPR are trademarks of ree, Inc. The UL logo is a registered trademark of UL LL. NEMA is a registered trademark of the National Electrical Manufacturers Association. The DL QPL logo is a registered trademark of Northeast Energy Efficiency Partnerships, Inc.