LabSim Mapping Matrix A+ Guide to Hardware Managing, Maintaining, and Troubleshooting Fourth Edition LabSim for A+ IT-Technician(220-602) Mapping: LabSim to Chapters 0.0 Introduction LabSim Chapter Reference / 0.1 System Tools 0.1.1 Using Device Manager 0.1.2 Using Task Manager 0.1.3 Using Event Viewer 0.1.4 Using Msconfig 0.1.5 PC Toolkit 0.2 Using the Simulator 1.0 System Components 1.1 BIOS 1.1.1 Editing the BIOS 1.1.2 Find BIOS Settings 1.1.3 Turn on Num Lock 1.1.4 Disable Onboard Devices 1.2 Power Supplies 1.2.1 Changing the Supply 1.2.2 Connect Power and Case Cables 1.2.3 Configuring UPS Settings 1.3 Motherboards 1.3.1 Installing a Motherboard 1.3.2 Choosing a Motherboard 1 1.3.3 Choosing a Motherboard 2 1.3.4 Install Header Devices 1.3.5 Configure Motherboard Jumpers 1.3.6 Clear the CMOS 1.4 Processors 1.4.1 Processor Forms 1.4.2 Installing a Processor 1.4.3 Choose a Processor 1 1.4.4 Choose a Processor 2 1.4.5 Install a Processor 1.4.6 Install a Heatsink and Fan 1.5 Memory Chapter 3 s 36-37 s 63-64 s 54-66 s 110-111 s 202-212 s 176-181 s 176-181 188 189 195 s 130-152 s 130-131/139-140 s 153-156/166-168 - 1 -
1.5.1 Memory Forms 1.5.2 Memory Form Comparison 1.5.3 Installing Memory 1.5.4 Installing SDRAM 1.5.5 Select and Install Memory 1.5.6 Install RDRAM Memory 1.5.7 Select SDRAM Memory 1.5.8 Choose the Correct Memory 1.5.9 Select DDR Memory 1.5.10 Select RDRAM Memory 1.5.11 Disable Memory Tests 1.6 Expansion Cards 1.6.1 Expansion Buses and Slots 1.6.2 Installing an Expansion Card 1.6.3 Install an AGP Card 1.6.4 Install an Expansion Card 1.7 Video 1.7.1 Video Interfaces 1.7.2 Select an AGP Card 1.7.3 Upgrade a Video Card 1.7.4 Select a Dual Monitor Video Card 1.7.5 Increase Shared Video Memory 1.7.6 Set the AGP Aperture 1.8 Audio 1.8.1 Sound Card Connectors 1.8.2 Install a Sound Card 1.8.3 Select a Sound Card 2.0 Storage Devices 2.1 Floppy 2.1.1 Installing a Floppy Drive 2.1.2 Install a Floppy Drive 2.1.3 Install Two Floppy Drives 2.2 Parallel ATA(IDE) 2.2.1 Installing an ATA Drive 2.2.2 Install a PATA Hard Disk 2.2.3 Configure Drive Jumpers 2.2.4 Select a Hard Drive 2.2.5 Install an Ultra ATA Drive 2.3 Serial ATA 2.3.1 Installing a Serial ATA Device 2.3.2 Install SATA Drives LabSim Chapter Reference / Chapter 1,5 Chapter 1,8-2 - s 222-228 s 222-228 s 241-243 s 222-238 s 231-238 226 193 s 21-24/184-186 s 358-360 s 334-335 s 334-335/358-360 6/332-333 s 334-335 s 331-332 s 328-341 197 s 383-384 s 385-392 s 385-392 s 263-264 s 278-291 s 281-283 s 276-277 263/270/278-291 s 265-267 s 291-292 2.4 SCSI 2.4.1 Install a SCSI Device and Adapter, App. C s 272-274/658-664
LabSim Chapter Reference / 2.4.2 Connect External SCSI Devices, App. C 2.4.3 Install an Internal SCSI Device 2.5 Optical Devices 2.5.1 Select a CD Drive 2.5.2 Select an Optical Drive 2.6 Choose a Storage Solution 2.6.1 Select a Hard Drive 1 2.6.2 Select a Hard Drive 2 3.0 File System 3.1 Partitions and Disks 3.1.1 Partition and Format a Disk 3.1.2 Create a Primary Partition 3.1.3 Create a Logical Drive 3.1.4 Creating Dynamic Volumes, App C 3.1.5 Create a Simple Volume 3.2 File Systems 3.3 Managing Files 3.4 File Attributes 3.5 Disk Optimization 4.0 Printing 4.1 Printer Configuration 4.1.1 Installing a Local Printer 4.1.2 Install a Plug and Play Printer 4.1.3 Manually Install a Printer 4.1.4 Configuring Printer Options 5.0 Networking 5.1 TCP/IP Configuration 5.1.1 Configuring Host Addressing 5.1.2 Conigure IP Paramters 5.1.3 Configure a Client for DHCP 5.2 Server Connections 5.3 Resource Sharing 5.4 Network Printing 5.4.1 Installing a Network Printer 5.4.2 Share a Local Printer 5.4.3 Add a Network Printer 5.5 Wireless Networking 5.5.1 Making a Wireless Connection 5.5.2 Create a Wireless Connection 5.6 Internet Connectivity - 3 - s 272-274/658-664 s 272-274/658-664 s 407-416 s 407-416 s 262-292 s 262-292 s 428-430 s 428-430 s 590-594 s 590-594 s 602-606 s 475-476/478-481 s 475-476/479-481 s 475-476/479-481
LabSim Chapter Reference / 5.7 Troubleshooting Tools 5.7.1 Using Ipconfig 5.7.2 Find Configuration Information 1 5.7.3 Find Configuration Information 2 5.7.4 Using Ping and Tracert 5.7.5 Find Path Information 5.7.6 Using Nslookup 5.8 Troubleshooting 5.8.1 Troubleshoot IP Configuration Problems 5.8.2 Troubleshoot Network Communication 1 5.8.3 Troubleshoot Network Communication 2 5.8.4 Troubleshoot Network Communication 3 6.0 Portable Devices 6.1 Upgrade and Repair 6.1.1 Notebook Components 6.1.2 Changing a Notebook Hard Drive 6.1.3 Adding Notebook Memory 6.1.4 Changing a Notebook Keyboard 6.1.5 LCD Components Chapter 11 Chapter 11 Chapter 11 7.0 Security 7.1 Resource Security 7.2 System Security 7.3 Auditing 7.4 Firewalls 7.5 Internet Explorer Security 8.0 System Management 8.1 Registry 8.2 Remote Management 8.3 System Updates 8.3.1 Using Automatic Updates 8.3.2 Configure Automatic Updates 8.3.3 Flashing the BIOS 8.4 System Restore 8.5 Backup and Restore 9.0 Troubleshooting 9.1 Memory 9.2 System and Startup Errors 9.3 System Recovery s 526-528 s 542-546 s 542-546 s 323-324 s 43-44 s 43-44 s 199-201 - 4 -
LabSim Mapping Matrix A+ Guide to Hardware Managing, Maintaining, and Troubleshooting Fourth Edition LabSim for A+ IT-Technician(220-602) Mapping: Chapters to LabSim Chapter s LabSim Chapter 1 s 21-24 6 1.6.1 Expansion Buses and Slots 1.7.1 Video Interfaces s 36-37 0.1.5 PC Toolkit s 63-64 s 54-66 1.2.1 Changing the Supply 1.2.2 Connect Power and Case Cables s 43-44 s 43-44 8.3.1 Using Automatic Updates 8.3.2 Configure Automatic Updates Chapter 3 s 110-111 1.2.3 Configuring UPS Settings s 130-152 s 130-131/139-140 s 153-156/166-168 1.4.1 Processor Forms 1.4.2 Installing a Processor 1.4.3 Choose a Processor 1 1.4.4 Choose a Processor 2 1.4.5 Install a Processor 1.4.6 Install a Heatsink and Fan s 202-210 s 176-181 s 176-181 188 189 195 193 197 1.1.1 Editing the BIOS 1.1.2 Find BIOS Settings 1.1.3 Turn on Num Lock 1.1.4 Disable onboard devices 1.3.1 Installing a Motherboard 1.3.2 Choosing a Motherboard 1 1.3.3 Choosing a Motherboard 2 1.3.4 Install Header Devices 1.3.5 Configure Motherboard Jumpers 1.3.6 Clear the CMOS 1.5.11 Disable Memory Tests 1.7.6 Set the AGP Aperture s 199-201 8.3.3 Flashing the BIOS s 222-228 s 222-228 s 241-243 s 222-238 s 231-238 226 1.5.1 Memory Forms 1.5.2 Memory Form Comparison 1.5.3 Installing Memory 1.5.4 Installing SDRAM 1.5.5 Select and Install Memory 1.5.6 Install RDRAM Memory 1.5.7 Select SDRAM Memory 1.5.8 Choose the Correct Memory 1.5.9 Select DDR Memory 1.5.10 Select RDRAM Memory 2.1.1 Installing a Floppy Drive - 5 -
Chapter s LabSim s 263-264 s 278-291 s 281-283 s 276-277 s 263/270/278-291 s 265-266 s 291-292 s 272-274 s 272-274 s 272-274 s 262-292 s 262-292 s 358-360 s 334-335 s 334-335/358-360 s 332-333 s 334-335 s 331-332 s 328-341 s 323-324 s 383-384 s 385-392 s 385-392 s 407-416 s 407-416 s 428-430 s 428-430 s 475-476 s 475-476 s 475-476 Chapter 11 s 526-528 s 546-549 s 542-546 2.1.2 Install a Floppy Drive 2.1.3 Install Two Floppy Drives 2.2.1 Installing an ATA Drive 2.2.2 Install a PATA Hard Disk 2.2.3 Configure Drive Jumpers 2.2.4 Select a Hard Drive 2.2.5 Install an Ultra ATA Drive 2.3.1 Installing a Serial ATA Device 2.3.2 Install SATA Drives 2.4.1 Install a SCSI Device and Adapter 2.4.2 Connect External SCSI Devices 2.4.3 Install an Internal SCSI Device 2.6.1 Select a Hard Drive 1 2.6.2 Select a Hard Drive 2 1.6.2 Installing an Expansion Card 1.6.3 Install an AGP Card 1.6.4 Install an Expansion Card 1.7.1 Video Interfaces 1.7.2 Select an AGP Card 1.7.3 Upgrade a Video Card 1.7.4 Select a Dual Monitor Video Card 6.1.5 LCD Components 1.8.1 Sound Card Connectors 1.8.2 Install a Sound Card 1.8.3 Select a Sound Card 2.5.1 Select a CD Drive 2.5.2 Select an Optical Drive 3.1.4 Creating Dynamic Volumes 3.1.5 Create a Simple Volume 5.1.1 Configuring Host Addressing 5.1.2 Conigure IP Paramters 5.1.3 Configure a Client for DHCP 5.3.1 Sharing Folders 5.3.2 Share a Folder 5.3.3 Mapping a Network Drive 5.3.4 Map a Drive 5.5.1 Making a Wireless Connection 5.5.2 Create a Wireless Connection 5.7.1 Using Ipconfig 5.7.2 Find Configuration Information 1 5.7.3 Find Configuration Information 2 5.8.1 Troubleshoot IP Configuration Problems 5.8.2 Troubleshoot Network Communication 1 5.8.3 Troubleshoot Network Communication 2 5.8.4 Troubleshoot Network Communication 3 6.1.1 Notebook Components 6.1.2 Changing a Notebook Hard Drive 6.1.3 Adding Notebook Memory - 6 -
Chapter s LabSim s 590-594 s 590-594 s 602-606 s 594-595 s 594-595 Appendix C s 658-664 s 658-664 s 658-664 4.1.1 Installing a Local Printer 4.1.2 Install a Plug and Play Printer 4.1.4 Configuring Printer Options 5.4.1 Installing a Network Printer 5.4.2 Share a Local Printer 5.4.3 Add a Network Printer 2.4.1 Install a SCSI Device and Adapter 2.4.2 Connect External SCSI Devices 2.4.3 Install an Internal SCSI Device - 7 -