Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E Servicing : Ameren UE, Commonwealth Edison, Ameren IP (Illinois Power Utility), Northern Indiana and Public Service (NIPSCO)
Illinois and Northwest Indiana Metering Equipment Contents Description Page Meter Socket Catalog Number Logic Catalog Numbering System............. Product Selection by Utility Ameren UE (Union Electric & Central Illinois Public). Commonwealth Edison.. 6 Technical Data Knockout Drawings..... 9 Product Selection by Utility Ameren IP (Illinois Power Utility)... 0 Northern Indiana Public Service Company NIPSCO.. Description Page Meter Packs Product Description..... Product Selection....... Main Tenant Circuit Breakers Product Description..... Product Selection....... Dimensions and Knockouts........ Accessories Meter Packs........... 7 Technical Data Knockout Drawings...... 8 EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E Copyright 007
Meter Socket Catalog Number Logic Catalog Numbering System TABLE. RS GROUP ING SYSTEM UT RS 0 B CH Standard Prefix (See Prefix Guide) See Product Group Designators Ampere Rating = 00 Amperes = 00 Amperes = 0 Amperes Service Design 0 = Overhead = Combination Overhead/ Underground = Underground, Side Wired = Combination, Overhead/ Underground, Side Wired Maximum Conductor (Line & Load) 0 = /8" Stud Connectors = #/0 Connectors = #0 kcmil Connectors = #0 kcmil Connectors Cutler-Hammer Standard Suffixes A = Solid Top B = Small Hub Opening C = Small Hub Closure Plate L = -/" Hub M = -/" Hub N = " Hub P = -/" Hub T = Large Hub Opening U = Large Hub Cover Plate V = -/" Large Hub Q = " Large Hub R = -/" Large Hub S = " Large Hub Z = Large to Small Hub Adapter Mounted NOTE: 00 CH catalog numbers are specialty sockets for individual utilities and do not follow typical catalog numbering system. RS Group = Residential Service, Single Position. Note: Some sockets that are built for specific utilities have their own unique catalog numbers. These can be found on the utility selection pages. METER SOCKET PREFIX GUIDE A = Aluminum enclosure B = Barrel lock provision, for an exposed INNER-TITE or Brooks barrel lock; unit includes an internal lock receiver bracket. F = Barrel lock with guard provision, for a lock guard INNER-TITE or Brooks barrel lock; unit includes an internal lock receiver bracket. G = Grounded fifth terminal (9 o clock position) H = bypass I = Inhibitor installed in wire connectors M = Temporary meter cover (waxed cardboard) N = No sealing ring (applies only to ring style sockets) R = Ring style socket S = Aluminum screw type sealing ring (applies only to ring style sockets) T = Grounding connector (# # Cu) for Tri-Plex ground TT = Two () grounding connectors (# # Cu) for Quad-Plex ground U = UL (Underwriters Laboratories) labeled Z = /6 Hex head connector screw in place of slotted (00 amperes only) Note: The U prefix is always used first followed by other prefixes required in alphabetical order. EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E July 007
Catalog Numbering System TABLE. R-6R AND H-6H GROUP ING SYSTEM UT R B CH Standard Prefix (See Prefix Guide on Page ) See Product Group Designators Ampere Rating = 00 Amperes = 00 Amperes Service Design 0 = Overhead = Combination Overhead/ Underground = Underground, Side Wired = Combination Overhead/ Underground, Side Wired = End Feed Maximum Conductor (Line & Load) 0 = /8" Stud Connectors = #/0 Connectors = #0 kcmil Connectors = #0 kcmil Connectors = #00 kcmil Connectors 6 = # kcmil Connectors 7 = #70 kcmil Connectors 8 = Dual #0 kcmil Connectors 9 = Dual #00 kcmil Connectors Cutler-Hammer Standard Suffixes A = Solid Top B = Small Hub Opening C = Small Hub Closure Plate L = -/" Hub M = -/" Hub N = " Hub P = -/" Hub T = Large Hub Opening U = Large Hub Cover Plate V = -/" Large Hub Q = " Large Hub R = -/" Large Hub S = " Large Hub Z = Large to Small Hub Adapter Mounted NOTE: 00 CH catalog numbers are specialty sockets for individual utilities and do not follow typical catalog numbering system. R-6R Group = Residential Service, Multiple Position. H-6H Group = Commercial or Residential Service, Multiple Position. EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E Copyright 007
Meter Socket Catalog Number Logic Catalog Numbering System TABLE. H GROUP ING SYSTEM UT H 0 B CH Standard Prefix (See Prefix Guide on Page ) See Product Group Designators Jaw Quantity = Terminal = Terminal 7 = 7 Terminal Ampere Rating = 00 Amperes = 0 Amperes Service Design 0 = Overhead = Combination Overhead/ Underground = Underground, Side Wired = Combination, Overhead/ Underground, Side Wired Maximum Conductor (Line & Load) 0 = /8 Stud Connectors = #/0 Connectors = #0 kcmil Connectors = #0 kcmil Connectors = #00 kcmil Connectors 6 = # kcmil Connectors 7 = #70 kcmil Connectors 8 = Dual #0 kcmil Connectors 9 = Dual #0 kcmil Connectors Cutler-Hammer Standard Suffixes A = Solid Top B = Small Hub Opening C = Small Hub Closure Plate L = -/" Hub M = -/" Hub N = " Hub P = -/" Hub T = Large Hub Opening U = Large Hub Cover Plate V = -/" Large Hub Q = " Large Hub R = -/" Large Hub S = " Large Hub Z = Large to Small Hub Adapter Mounted NOTE: 00 CH catalog numbers are specialty sockets for individual utilities and do not follow typical catalog numbering system. H Group = Commercial or Residential Service, Single Position (lever bypass). EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E July 007
Product Selection by Utility Ameren UE (Union Electric) 00 Ampere Single-Position Meter Socket (UTRS0BCH) 0 Ampere Lever Bypass Meter Socket (0097CH) 00 Ampere Lever Bypass Meter Socket (UTH7TCH) 00 Ampere Multi-Position Meter Socket (UTRTCH) TABLE. AMEREN UE APPROVED METER SOCKETS DIMENSIONS IN INCHES CUTLER- HAMMER CATALOG NUMBER DIMENSIONS CONNECTIONS CONCENTRIC KNOCKOUTS (SEE PAGE 8) H W D LINE LOAD 00 Ampere Single-Position Residential UTRS0BCH A, Terminal, SM Hub Open, OH/UG 0.88 8.00 #8 /0 #8 /0.00. 00 Ampere Single-Position Residential UTRS0BCH UTRSBCH UTRSACH 00 A, Terminal, SM Hub Open, OH 00 A, Terminal, SM Hub Open, OH/UG 00 A, Terminal, Solid Top, UG, Offset.00.00 Ground connection. Lever bypass. Note: 00 CH catalog numbers are specialty sockets for individual utilities and do not follow typical catalog numbering system. TABLE. CUTLER-HAMMER METER SOCKET ACCESSORIES 8.00.00.8.8.00 #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil 0 Ampere Commercial Residential w/ Lever Bypass 0097CH 0 A, Terminal, LG Hub Cover Plate, OH/UG 6.6.00.69 Dual Dual 00 Ampere Single-Position Commercial w/ Lever Bypass UTHB or TCH UTH7B or TCH 00 A, Terminal, SM or LG Hub Open, OH/UG 9.00 00 A, 7 Terminal, SM or LG Hub Open, OH/UG 9.00 00 Ampere Multi-Position Sockets Residential UTRBCH UTRBCH UTRBCH UTRBCH UT6RBCH 00 A, Position, SM Hub Open, OH/UG, Ctr Fed 00 A, Position, SM Hub Open, OH/UG, Ctr Fed 00 A, Position, SM Hub Open, OH/UG, Ctr Fed 00 A, Position, SM Hub Open, OH/UG, Ctr Fed 00 A, 6 Position, SM Hub Open, OH/UG, Ctr Fed 00 Ampere Multi-Position Sockets Residential UTRTCH UTRTCH UTRTCH UTR9TTCH UT6R9TTCH 00 A, Position, LG Hub Open, OH/UG, Ctr Fed 00 A, Position, LG Hub Open, OH/UG, Ctr Fed 00 A, Position, LG Hub Open, OH/UG, Ctr Fed 00 A, Position, LG Hub Open, OH/UG, Ctr Fed 00 A, 6 Position, LG Hub Open, OH/UG, Ctr Fed..7 0.6 8.78 6.9..7 0.6.78 6.9.00.00 #6 0 kcmil #6 0 kcmil #6 0 kcmil #6 0 kcmil /0 00 kcmil /0 00 kcmil /0 00 kcmil #8 /0 #8 /0 #8 /0 #8 /0 #8 /0 #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil.7.7.7 CUTLER-HAMMER CUTLER-HAMMER ARP0000CH ARP0000CH ARP0000CH ARP00006CH ARP00007CH.00-Inch Hub Small Opening.-Inch Hub Small Opening -Inch Hub Small Opening.00-Inch Hub Small Opening -Inch Hub Small Opening ARP00008CH ARP0006CHB ARP000CHAP ARP000CHJ ARP0009CH Small Hub Closure Plate Aluminum Large Hub Closure Plate Hub Adapter Plate Large to Small Replacement Plug-in Fifth Terminal (R and RS Models Only) Replacement Block Assembly for 00 A Sockets /0 Maximum ARP0007CH ARP0008CH ARP0009CH ARP000CH ARP0000CHB.00-Inch Hub Large Opening -Inch Hub Large Opening -Inch Hub Large Opening.00-Inch Hub Large Opening Small Hub Closure Plate ARP0008CH ARP00CH ARP009CH ARP007CH ARP009CH Replacement Block Assembly for 00 A Sockets 0 Maximum Replacement Block Assembly for 0 A Sockets 0 Maximum # kcmil Lug Dual Lug Lug EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E Copyright 007
Product Selection by Utility Commonwealth Edison 00 Ampere Single-Position Meter Socket (00766CH) Instrument Rated Meter Socket Terminal (USTHACH) 00 Ampere Single-Position Meter Socket (0098CH) 00 Ampere Multi-Position Meter Socket (008960CH) TABLE 6. COMMONWEALTH EDISON APPROVED METER SOCKETS DIMENSIONS IN INCHES CUTLER- HAMMER CATALOG BY- DIMENSIONS CONNECTIONS NUMBER TERMINALS HUB PASS TH JAW H W D LINE LOAD 00 & 00 Ampere Overhead Single Meter Sockets Single-Phase V 00766CH 007666CH /00 A, Ground Connector Included 00 A, Ground Connector Included SM Opening SM Opening Hub sold separately. See Page 8, Table 8. For BR breakers, see Page, Table 9. " pedestal raceway 0088CH, 8" raceway extension 00968CH. Field kit ordered separately. Field reversible incoming lugs for OH or UG applications. One kit per socket. Note: 00 CH catalog numbers are specialty sockets for individual utilities and do not follow typical catalog numbering system. Lever ARP000CHJ.00 9.00 8.00 0.8.9 #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil 0 Ampere Overhead/Underground Single Meter Sockets Single-Phase V 00767CH 0 A, OH/UG, Ground Connector Included LG Opening Lever ARP006CH 6.6.00.67 /8" Stud /8" Stud 00 Ampere Overhead Single Meter Socket -Phase V 007670CH 00 A, Ground Connector Included 7 LG Opening Lever 9.00.00 00 & 00 Ampere Overhead Combination Meter Breaker Single Sockets Single-Phase 0 V 009079CH 00908CH 0098CH 0098CH 00 A with Provision for BR00 Main Breaker 00 A with BR Type Main Breaker Installed 00 A with CC Type Main Breaker Installed 00 A with CC Type Main Breaker Installed with Circuit BR Provision 00 Ampere Multi-Position Horizontal Meter Sockets 00969CH 00969CH 00969CH 009696CH 009697CH Gang OH/UG Gang OH/UG Gang OH/UG Gang OH/UG 6 Gang OH/UG 00 Ampere Multi-Position Horizontal Meter Sockets 0088CH Gang with Raceway Pedestal Opening 0088CH Gang with Raceway Pedestal Opening 0088CH Gang with Raceway Pedestal Opening 00979CH Gang with Raceway Pedestal Opening 0096CH 6 Gang with Raceway Pedestal Opening 00 Ampere Multiple Horizontal Sockets 00898CH 00899CH 008960CH 0099CH 00996CH Gang Gang Gang Gang 6 Gang SM Opening SM Opening SM Opening SM Opening SM Cover Plate () SM Cover Plate () SM Cover Plate () SM Cover Plate () SM Cover Plate () LG Cover Plate LG Cover Plate LG Cover Plate LG Cover Plate () LG Cover Plate () LG Cover Plate LG Cover Plate LG Cover Plate LG Cover Plate LG Cover Plate ARP000CHJ ARP000CHJ ARP000CHJ ARP000CHJ ARP000CHJ ARP000CHJ ARP000CHJ ARP000CHJ ARP000CHJ ARP000CHJ ARP000CHJ ARP000CHJ ARP000CHJ ARP000CHJ ARP000CHJ.7.7 9.00 9.8 8.00 8.00.00.00.6. 0.7 8.6 6.78..7 0.6.78 6.9..7 0.6.78 6.9.8.8.8.8 #8 /0 #8 /0 #6 0 kcmil #6 0 kcmil #6 0 kcmil #6 0 kcmil #6 0 kcmil /0 00 kcmil /0 00 kcmil /0 00 kcmil /0 00 kcmil /0 00 kcmil /0 00 kcmil /0 00 kcmil /0 00 kcmil #8 /0 #8 /0 #8 /0 #8 /0 #8 /0 #8 /0 #8 /0 #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil 6 EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E July 007
00 Ampere Single-Position Pedestal Meter Socket (00688CH) 00 Ampere Two-Position Pedestal Meter Socket (0096CH) 00 Ampere Meter Breaker Pedestal (009078CH) 0 Ampere Meter Breaker Pedestal (00887CH) TABLE 6. COMMONWEALTH EDISON APPROVED METER SOCKETS DIMENSIONS IN INCHES (CONTINUED) CUTLER- HAMMER CATALOG BY- DIMENSIONS CONNECTIONS NUMBER TERMINALS HUB PASS TH JAW H W D LINE LOAD Pedestals 00688CH 007680CH 008786CH 0096CH 007680CH 008786CH 00888CH 0090CH 00906CH 00/00 Ampere Pedestal 8" Pedestal Extension 0" Pedestal Extension -Position 00 Ampere Meter Sockets (Vertical) 8" Pedestal Extension 0" Pedestal Extension 0 Ampere Pedestal 8" Pedestal Extension 0" Pedestal Extension Hub sold separately. Field kit ordered separately. Solid Top ARP008CH 6.00 8.97.00 /0 Compression #6 0 kcmil Solid Top 7.00 8.97.00 /0 Compression Solid Top Lever 8.00.97.00 /8" Studs Dual 0098CH -Phase 0 Ampere Pedestal 7 Solid Top Lever Meter Breaker Combo Pedestals 00886CH 0090CH 0090CH 009078CH 0090CH 0090CH 00887CH 0090CH 0090CH 00 Ampere Pedestal with Breaker (BWH Type Disconnect Installed kaic) Circuit BR Provision 8" Pedestal Extension 0" Pedestal Extension 00 Ampere Pedestal with Breaker (BR Type Disconnect Installed 0 kaic) 8" Pedestal Extension 0" Pedestal Extension 0 Ampere with 00 A CC Type Breakers 8" Pedestal Extension 0" Pedestal Extension Instrument Rated Meter Sockets USTH6A9CH 6 Terminal Transformer Rated Socket Single-Phase, -Wire USTH8A9CH 8 Terminal Transformer Rated Socket -Phase, -Wire USTHACH Terminal Transformer Rated Socket -Phase, -Wire Solid Top 70.00.00 6.00 Solid Top 70.00.00 6.00 Solid Top Lever 8.00.97.00 /8" Stud 6 8 Solid Top Solid Top Solid Top Note: 00 CH catalog numbers are specialty sockets for individual utilities and do not follow typical catalog numbering system. 0.00 0.00 0.00.00.00.00... EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E Copyright 007 7
Product Selection by Utility Commonwealth Edison (Continued) TABLE 7. CONCENTRIC KNOCKOUTS FOR COMMONWEALTH EDISON PAGE 6 AND 7, TABLE 6 CUTLER-HAMMER CONCENTRIC KNOCKOUTS CUTLER-HAMMER CONCENTRIC KNOCKOUTS 00 & 00 Ampere Overhead Single Meter Sockets Single-Phase V 00 Ampere Multiple Horizontal Sockets 00766CH 007666CH 0 Ampere Overhead/Underground Single Meter Sockets Single-Phase V 00767CH 00 A Overhead Single Meter Socket -Phase V 007670CH 00 & 00 Ampere Overhead Combination Meter Breaker Single Sockets Single-Phase 0 V 009079CH 00908CH 0098CH 0098CH 00 Ampere Multi-Position Horizontal Meter Sockets 00969CH 00969CH 00969CH 009696CH 009697CH 00 Ampere Multi-Position Horizontal Meter Sockets 0088CH 0088CH 0088CH 00979CH 0096CH.00.00.. 00898CH 00899CH 008960CH 0099CH 00996CH Pedestals 00688CH 007680CH 008786CH 0096CH 007680CH 008786CH 00888CH 0090CH 00906CH 0098CH Meter Breaker Combo Pedestals 00886CH 0090CH 0090CH 009078CH 0090CH 0090CH 00887CH 0090CH 0090CH Instrument Rated Meter Sockets USTH6A9CH USTH8A9CH USTHACH...00.00.00.00.00.00 TABLE 8. CUTLER-HAMMER METER SOCKET ACCESSORIES CUTLER-HAMMER CUTLER-HAMMER ARP0000CH ARP0000CH ARP0000CH ARP00006CH ARP00007CH.00-Inch Hub Small Opening.-Inch Hub Small Opening -Inch Hub Small Opening.00-Inch Hub Small Opening -Inch Hub Small Opening ARP0006CHB ARP000CHAP ARP000CHJ ARP0009CH ARP0008CH Large Hub Closure Plate Hub Adapter Plate Large to Small Replacement Plug-in Fifth Terminal (R and RS Models Only) Replacement Block Assembly for 00 A Sockets /0 Maximum Replacement Block Assembly for 00 A Sockets 0 Maximum ARP0007CH ARP0008CH ARP0009CH ARP000CH ARP0000CHB ARP00008CH.00-Inch Hub Large Opening -Inch Hub Large Opening -Inch Hub Large Opening.00-Inch Hub Large Opening Small Hub Closure Plate Small Hub Closure Plate Aluminum ARP00CH ARP009CH ARP007CH ARP009CH 007680CH 008786CH Replacement Block Assembly for 0 A Sockets 0 Maximum # kcmil Lug Dual Lug Lug 8.00-Inch Pedestal Extension (8.00" H 8.97" W.9" D) 0.00-Inch Pedestal Extension (0.00" H 8.97" W.9" D) Note: See Page for BR and BWH type breaker offering. Note: 00 CH catalog numbers are specialty sockets for individual utilities and do not follow typical catalog numbering system. 8 EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E July 007
Technical Data Knockout Drawings 00887CH 009078CH 00886CH 0096CH 00688CH 00888CH FIGURE. KNOCKOUT DRAWINGS DRAWINGS NOT TO SCALE EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E Copyright 007 9
Product Selection by Utility Ameren IP (Illinois Power Utility) 00 Ampere Single-Position Offset Meter Socket (UHTTRSACH) 0 Ampere Lever Bypass Meter Socket (UTTH0TCH) 00 Ampere Lever Bypass Meter Socket (UTH7TCH) 00 Ampere Multi-Position Meter Socket (UHTTRTCH) TABLE 9. AMEREN IP (ILLINOIS POWER) APPROVED METER SOCKETS DIMENSIONS IN INCHES CUTLER-HAMMER CATALOG NUMBER DIMENSIONS CONNECTIONS CONCENTRIC KNOCKOUTS (SEE PAGE 8) H W D LINE LOAD 00 Ampere Single-Position Residential UHTTRS0BCH A, Terminal, SM Hub Open, OH/UG.00 8.00 #8 /0 #8 /0.00. 00 Ampere Single-Position Residential UHTTRS0BCH UHTTRSACH UHTTRSBCH 00 A, Terminal, SM Hub Open, OH 00 A, Terminal, Solid Top, UG 00 A, Terminal, SM Hub Open, OH/UG Quad plex ground connection. bypass. Lever bypass. Ground connection..00.00 8.00.00.8.00.8 #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil 0 Ampere Commercial Residential w/ Lever Bypass UTTH0TCH 0 A, Terminal, LG Hub Open, OH/UG 6.6.00.69 /8" Stud /8" Stud 00 Ampere Single-Position Commercial w/ Lever Bypass UTHB or TCH UTH7B or TCH 00 A, Terminal, SM or LG Hub Open, OH/UG 9.00 00 A, 7 Terminal, SM or LG Hub Open, OH/UG 9.00 00 Ampere Multi-Position Sockets Residential UHTTRBCH UHTTRBCH UHTTRBCH UHTTRBCH UHTT6RBCH 00 A, Position, SM Hub Open, OH/UG, Ctr Fed 00 A, Position, SM Hub Open, OH/UG, Ctr Fed 00 A, Position, SM Hub Open, OH/UG, Ctr Fed 00 A, Position, SM Hub Open, OH/UG, Ctr Fed 00 A, 6 Position, SM Hub Open, OH/UG, Ctr Fed 00 Ampere Multi-Position Sockets Residential UHTTRTCH UHTTRTCH UHTTRTCH UHTTR9TTCH UHTT6R9TTCH 00 A, Position, LG Hub Open, OH/UG, Ctr Fed 00 A, Position, LG Hub Open, OH/UG, Ctr Fed 00 A, Position, LG Hub Open, OH/UG, Ctr Fed 00 A, Position, LG Hub Open, OH/UG, Ctr Fed 00 A, 6 Position, LG Hub Open, OH/UG, Ctr Fed 00 Ampere Single-Position Sockets Residential & Commercial CH86K CH8K7 00 A, Terminal, LG Closure Plate, OH/UG 00 A, 7 Terminal, LG Closure Plate, OH/UG 6.00..7 0.6 8.78 6.9..7 0.6.78 6.9 8.00 0.00.00.00 6.0 6.00 #6 0 kcmil #6 0 kcmil #6 0 kcmil #6 0 kcmil /0 00 kcmil /0 00 kcmil /0 00 kcmil /8 Stud /8 Stud #8 /0 #8 /0 #8 /0 #8 /0 #8 /0 #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil /8 Stud /8 Stud.00.00.00.00.00.00.00.7.7.7 TABLE 0. CUTLER-HAMMER METER SOCKET ACCESSORIES CUTLER-HAMMER CUTLER-HAMMER ARP0000CH ARP0000CH ARP0000CH ARP00006CH ARP00007CH.00-Inch Hub Small Opening.-Inch Hub Small Opening -Inch Hub Small Opening.00-Inch Hub Small Opening -Inch Hub Small Opening ARP00008CH ARP0006CHB ARP000CHAP ARP000CHJ ARP0009CH Small Hub Closure Plate Aluminum Large Hub Closure Plate Hub Adapter Plate Large to Small Replacement Plug-in Fifth Terminal (R and RS Models Only) Replacement Block Assembly for 00 A Sockets /0 Maximum ARP0007CH ARP0008CH ARP0009CH ARP000CH ARP0000CHB.00-Inch Hub Large Opening -Inch Hub Large Opening -Inch Hub Large Opening.00-Inch Hub Large Opening Small Hub Closure Plate ARP0008CH ARP00CH ARP009CH ARP007CH ARP009CH Replacement Block Assembly for 00 A Sockets 0 Maximum Replacement Block Assembly for 0 A Sockets 0 Maximum # kcmil Lug Dual Lug Lug 0 EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E July 007
Northern Indiana Public Service Company NIPSCO 00 Ampere Single-Position Meter Socket (UHTRSBCH) 00 Ampere Lever Bypass Meter Socket (UTH7TCH) TABLE. NIPSCO APPROVED METER SOCKETS DIMENSIONS IN INCHES CUTLER-HAMMER CATALOG NUMBER Ground connection. bypass. Lever bypass. Anti-inversion clip factory installed. Quad plex ground connection. Note: 00 CH catalog numbers are specialty sockets for individual utilities and do not follow typical catalog numbering system. Note: Please reference Table 0 on Page 0 for Cutler-Hammer Meter Socket Accessories. DIMENSIONS CONNECTIONS CONCENTRIC KNOCKOUTS (SEE PAGE 8) H W D LINE LOAD 00 Ampere Single-Position Residential UHTRS0BCH A, Terminal, SM Hub Open, OH 0.88 8.00 #8 /0 #8 /0.00. 00 Ampere Single-Position Residential UHTRS0BCH UHTRSBCH 00766CH 00688CH 00 A, Terminal, SM Hub Open, OH 00 A, Terminal, SM Hub Open, UG 00 A, Terminal, SM Hub Open, OH 00 A, Terminal, Solid Top, UG, Pedestal 0 Ampere Commercial Residential w/ Lever Bypass 0089CH 00767CH.00.00.00 6.00 0 A, Terminal, LG Hub Open, OH/UG 6.6 0 A, Terminal, LG Hub Open, OH/UG 6.6 00 Ampere Single-Position Commercial w/ Lever Bypass UTH0B or TCH UTHB or TCH UTH70B or TCH UTH7B or TCH 007666CH 007670CH 00 A, Terminal, SM or LG Hub Open, OH 00 A, Terminal, SM or LG Hub Open, OH/UG 00 A, 7 Terminal, SM or LG Hub Open, OH 00 A, 7 Terminal, SM or LG Hub Open, OH/UG 00 A, Terminal, SM or LG Hub Open, OH 00 A, 7 Terminal, SM or LG Hub Open, OH/UG Ampere Multi-Position Residential Single-Phase UHTRCCH UHTRCCH UHTRCCH UHTRCCH UHT6RCCH A, Position, SM Hub Closure Plate, OH/UG, End Feed A, Position, SM Hub Closure Plate, OH/UG, End Feed A, Position, SM Hub Closure Plate, OH/UG, End Feed A, Position, SM Hub Closure Plate, OH/UG, End Feed A, 6 Position, SM Hub Closure Plate, OH/UG, End Feed 00 Ampere Multi-Position Residential Single-Phase UHTRTCH UHTRTCH UHTRTCH UHTR9TTCH UHT6R9TTCH 00 A, Position, LG Hub Open, OH/UG, Ctr Fed 00 A, Position, LG Hub Open, OH/UG, Ctr Fed 00 A, Position, LG Hub Open, OH/UG, Ctr Fed 00 A, Position, LG Hub Open, OH/UG, Ctr Fed 00 A, 6 Position, LG Hub Open, OH/UG, Ctr Fed 9.00 9.00 9.00 9.00 9.00 9.00 8.00.00 8.00 9.00.00.00 0 0 0 0.7 8. 6.6 60.00. 0.6.78 6.8.8.8.00.69.69.00.00.00.00.00.00 #8 0 kcmil #8 0 kcmil #8 0 kcmil /0 Compression /8" Stud /8" Stud #6 0 kcmil #6 0 kcmil #6 0 kcmil #6 0 kcmil #6 0 kcmil /0 00 kcmil /0 00 kcmil /0 00 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil #6 0 kcmil /8" Stud /8" Stud #8 /0 #8 /0 #8 /0 #8 /0 #8 /0 #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil #8 0 kcmil EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E Copyright 007
Meter Packs Product Description Product Selection TABLE. METER PACK ING SYSTEM M P R C T -Phase Trough Opening Meter Pack (MPRRLBT and 0089CH) Eaton s Cutler-Hammer MP units are self-contained (main terminal box included) for installations requiring up to six meter socket positions in a single enclosure. Units are not gangable with any other metering device. Approved by major power companies, UL listed, suitable as service equipment and meets the service and electrical requirements of EUSERC and CECHA. Series rating up to 00 kaic. All ringless cover devices include fifth jaw as standard. Ring type devices do not include fifth jaw as standard. Order MMJK if needed. Bondable neutral. 0/0 Vac, single-phase, -wire metering device. Up to amperes maximum horizontal bus rating. Incoming lugs not included (phase A, phase B, and neutral). Indoor/outdoor construction. Provision for -pole breaker (plug-on type for ampere sockets and bolt-on type for 00 ampere sockets) circuit breakers not included. Underground incoming feed. Aluminum or copper bus. When Ordering:. Determine catalog number of the basic device.. Include Lug Kit for incoming section. See Table 6.. Find quantity and catalog numbers for tenant circuit breakers. (Order one breaker per socket.) See Page.. Select required accessories. See Page 7. TABLE. METER PACKS ALUMINUM BUS SOCKET AMPERE RATING Metering Type MP = Meter Pack NUMBER OF METER SOCKETS BUS AMPERE RATING Ringless Style Meter Socket Covers 6 00 6 00 00 00 00 Ringless Style Covers with Bypass 6 00 6 Number of Meters,,, or 6 Blank = Accessory 00 00 00 00 00 See Table 9. Fifth jaw factory installed at 9 o clock position. Main lugs included. #6 00 kcmil. (Optional lugs are not available.) Ampere Rating = Amperes 0 = 00 Amperes Blank = Accessory Bus Ampere Rating = 00 Amperes = 00 Amperes 6 = Amperes Blank = Accessory MAIN TENANT BREAKER TYPE Plug-on Type BR_ BRH_ BRHH_ Bolt-on Type CC_X CHH_HX CHH_HX CHH_X Plug-on Type Plug-on Type BR_ BRH_ BRHH_ Bolt-on Type CC_X CHH_HX CHH_HX CHH_X Bottom feed only. Line side lugs also included in these units. See Table 8. CECHA approved. Bus Material C = Copper Bus Blank = Aluminum Bus KNOCKOUT OPENINGS MPRRL MPRRL MPRRL MP6RRL MP66RRL MP0RRL MP06RRL MP06RRL MP06RRL MP606RRL Note: See Table 6 for Main Lug Kit Selection. See Table 7 for Wire Sizes. Security or Accessory Code R = Ring RRL = Ringless RRLB = Ringless with Bypass LK = Lug Kit (Accessory) SC = Crimp Lug Landing Pad Kit (Accessory) TROUGH OPENING MPRRLB MPRRLBEXT MPRRLB MPRRLB MP6RRLB MP66RRLB MP0RRLB MP06RRLB MP06RRLB MP06RRLB MP606RRLB MPRRLBT MPRRLBT MP6RRLBT MP66RRLBT MP0RRLBT MP06RRLBT MP06RRLBT MP06RRLBT MP606RRLBT SEMI-FLUSH FLANGE KIT MPSFK MPSFK MPSFK MPSFK MPSFK MPSFK MPSFK MPSFK MPSFK6 MPSFK6 MPSFK MPSFK MPSFK MPSFK MPSFK MPSFK MPSFK MPSFK MPSFK MPSFK6 MPSFK6 Built at Lincoln Flex Center. Trough included. Lugs included. See Table 8 for lug sizes. EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E July 007
Meter Packs TABLE. METER PACKS COPPER BUS SOCKET AMPERE RATING NUMBER OF METER SOCKETS BUS AMPERE RATING MAIN TENANT BREAKER TYPE CATALOG NUMBER SEMI-FLUSH FLANGE KIT Ringless Style Meter Socket Covers 6 00 6 00 00 00 Plug-on Type BR_ BRH_ BRHH_ Bolt-on Type CC_X CHH_HX CHH_HX CHH_X MPRRLC MPRRLC MP6RRLC MP66RRLC MP0RRLC MP06RRLC MP06RRLC MP06RRLC MP606RRLC MPSFK MPSFK MPSFK MPSFK MPSFK MPSFK MPSFK MPSFK6 MPSFK6 Ringless Style Covers with Bypass 6 00 6 00 00 00 Plug-on Type BR_ BRH_ BRHH_ Bolt-on Type CC_X CHH_HX CHH_HX CHH_X MPRRLBC MPRRLBC MP6RRLBC MP66RRLBC MP0RRLBC MP06RRLBC MP06RRLBC MP06RRLBC MP606RRLBC MPSFK MPSFK MPSFK MPSFK MPSFK MPSFK MPSFK MPSFK6 MPSFK6 See Table 9. Fifth jaw factory installed at 9 o clock position. CECHA approved. TABLE. CECHA APPROVED METER SOCKET ACCESSORIES Pedestal Trough Raceway for Underground Services 6.00-Inch Pedestal Trough Raceway (6.00" H 9.00" W." D) 8.00-Inch Pedestal Extension For use with meter packs with T trough provision. TABLE 6. MAIN LUG KIT SELECTION FIELD INSTALLED KITS FOR EITHER 00 OR AMPERE MAIN BUS LINE LUG AND WIRE SIZES ORDER SEPARATELY AND FIELD INSTALL () #6 kcmil or () /0 0 kcmil () 0 00 kcmil () # 00 kcmil () 70 kcmil Crimp lug landing pad 0 70 kcmil CATALOG NUMBER 0089CH 007680CH LINE LUG KIT ORDER THREE KITS (FOR TWO LINES AND NEUTRAL) MPLK MPLK MPLK MPLK MPSC This lug is not UL listed. This kit comes with three pads for two lines and neutral. Each pad will accept one or two crimp lugs. Cannot be used on MPR, RL and RLB EUSERC underground termination. TABLE 7. WIRE SIZES NEUTRAL AND GROUND LUGS Neutral: ampere meter pack 00 ampere meter pack Equipment Ground Bar: ampere meter pack 00 ampere meter pack WIRE SIZE, AL/CU #6 /0 #/0 00 kcmil # # # /0 Note: Each stack includes a neutral and ground bar. If an extra ground bar is needed, order MMGBK. TABLE 8. METER PACK WITH TROUGH LUGS CATALOG NUMBER Optional Ground Bar #6 /0 MMGBK CATALOG NUMBER () #6-0 kcmil Hole and () /0 kcmil or () /0 0 kcmil Hole MPRRLBT () #6-0 kcmil Hole and () /0 kcmil or () /0 0 kcmil Hole MPRRLBT () 0 00 kcmil Holes () 0 00 kcmil Holes () 0 00 kcmil Holes () 0 00 kcmil Holes () 0 00 kcmil Holes () 0 00 kcmil Holes () 0 00 kcmil Holes MP6RRLBT MP66RRLBT MP0RRLBT MP06RRLBT MP06RRLBT MP06RRLBT MP606RRLBT Note: Lugs are included in meter packs with the trough one lug per phase. EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E Copyright 007
Group Metering Main Tenant and Pedestal Circuit Breakers Product Description MP, MM and MM Main Tenant and Pedestal Circuit Breakers The following Cutler-Hammer breakers are to be used on MP and combination meter breaker units. They are 0/0 Vac field installed. BR00 CC00 BWH00 Product Selection TABLE 9. MP, MM AND MM MAIN TENANT AND PEDESTAL CIRCUIT BREAKERS NUMBER OF POLES MAIN TENANT CIRCUIT BREAKER AMPERE RATING 0,000 AIC,000 AIC,000 AIC,000 AIC 00,000 AIC Plug-on type circuit breakers used with MP, MM and MM ampere modular metering stacks Bolt-on type circuit breakers used with MP, MM and MM 00 ampere modular metering stacks 60 70 80 90 00 0 60 70 80 90 00 0 7 00 BR60 BR70 BR80 BR90 BR00 BR0 BR CC00X CCX CC0X CC7X CC00X BRH60 BRH70 BRH80 BRH90 BRH00 BRH0 BRH CHH060HX CHH070HX CHH080HX CHH090HX CHH00HX CHHHX CHH0HX CHH7HX CHH00HX BRHH60 BRHH70 BRHH80 BRHH90 BRHH00 BRHH0 BRHH CHH060HX CHH070HX CHH080HX CHH090HX CHH00HX CHHHX CHH0HX CHH7HX CHH00HX CHH060X CHH070X CHH080X CHH090X CHH00X CHHX CHH0X CHH7X CHH00X Note: For the 00887CH, order CC 0 kaic breakers. Omit the X suffix. TABLE 0. MAIN BREAKER SELECTION CHART MAXIMUM AMPERE RATING 00 0 00 -POLE BREAKER 0 KAIC KAIC BW00 BW BW0 BW00 BWH00 BWH BWH0 BWH00 Load Side Lug Kit for BW Breakers MCBK For use with 00886CH. When a provision for main is provided, order one of the main breakers listed in this table. All panels are dual labeled to accept Types BW and BWH Main Breakers. EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E July 007
.0.6.70.6 Meter Packs Dimensions and Knockouts (in Inches) MP Meter Packs Aluminum and Copper Bus To C L of Wall Mtg. Screw.699 Meter To CL Rail Mtg. Screw CL 7.0 () Knockout for, -/, -/ Conduit Concentric Knockouts ", -/", -/", Knockout Concentric Knockouts -/", ", -/", " Knockout.60.60 () Knockout for -/,, -/ Conduit Concentric Knockouts /" Knockout.. 9.000 9.000 9.000 8.90, Meter Device.0 Concentric Knockouts -/", ", -/", " Knockout.69.0, 6 Meter Device Concentric Knockouts ", -/", -/", Knockout Concentric Knockouts /" Knockout 7.000 6.80.6.0 9.000 9.000. "Z" "Y""X".0 "W".60..08 (6.6) (76.).690 7.00.0 6.60 "W" "X" "Y" "Z".60. 8.000 0 0 6.0.690 7.0 "Z" = CL of /" Ring "Y" = CL of -/" Ring "X" = CL of -/" Ring "W" = CL of " Ring.60.880.000 9.80 Mtn. for, -/, " C-H Conduit Hubs 6.80.900.060.0 -/", ", -/", " Knockouts /" Knockout.87 ", -/", -/" Knockouts (6 Required).80..6 0 7 Mtg Holes Places, -/, -/" KO 6 Places.8.7.89..806.70.880.0.70.880.06.8.000.06 Dia. Hub Opening.688.77.0.6 60 Bottom Endwall Knockouts for Units with "T" Suffix, Meter Device.06 Top View.0.6 60 Bottom Endwall Knockouts for Units with "T" Suffix, 6 Meter Device Ampere Meter Packs FIGURE. AMPERE MAXIMUM TENANT BREAKER EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E Copyright 007
.0.86 8.. Group Metering Meter Packs Dimensions and Knockouts (in Inches) MP Meter Packs Aluminum and Copper Bus.80.80.0.0 Meter Device. 8.00.68 To C L of Wall Mtg. Screw Meter To CL Rail Mtg. Screw CL. 8.... 6..0 8.7 7.0 () Knock Out For ", -/", -/", " Conduit.. Concentric Knockouts Concentric Knockouts /" Knockout ", -/", -/", " Knockout Concentric Knockouts -/", ", -/", " Knockout "W" "Z" "Y""X".0, & Meter Endwall, Meter Device.60.000..080 Typ. 0..690.6 7.00, 6 Meter Device "Z" = CL of /" Ring "Y" = CL of -/" Ring "X" = CL of -/" Ring "W" = CL of " Ring Concentric Knockouts -/", ", -/", " Knockout.69 Concentric Knockouts ", -/", -/", " Knockout 7.000 Concentric Knockouts /" Knockout.6.6.0 6. "X" "W" "Y" "Z".60 0 8.000 8.6 0.690 7.0.0.6 60 Bottom Endwall Knockouts for Units with "T" Suffix,, Meter Device.0.6 60 Bottom Endwall Knockouts for Units with "T" Suffix, 6 Meter Device 00 Ampere Meter Packs FIGURE. 00 AMPERE MAXIMUM TENANT BREAKER 6 EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E July 007
Accessories Meter Packs TABLE. ACCESSORIES FOR MP METERING STACKS APPLICATION CATALOG NUMBER Fifth Jaw Kit Bolted onto neutral in the, 6 or 9 o clock position. MMJK Typically used on network metering systems (-phase in/single-phase out) or when specified by utility company. Isolated Fifth Jaw Kit Connects to the neutral with an insolated wire. MMJKOP Bypass Used only on ringless cover stacks, kits can be installed on ampere or 00 ampere sockets. Note: For MPRRL use: MMBPH WCG8HB Meter Bypass Jumper Installed on ampere or 00 ampere sockets. MMBPJ Jumpers are plugged into jaws. Order Lexan cover plate with bypass jumpers to prevent access to meter socket once energized. (Not UL listed.) Lexan Blank Cover Circular cover mounted on ring or ringless devices MMPCP preventing access to meter socket while meter is not in place. Includes plastic tabs which plug into each jaw. Same as MMPCP minus the tabs located in the back to plug into jaws. MMACP This device to be used while meter bypass jumpers are in place (MMBPJ). Blank Meter Socket Cover Used for ampere stacks. Fits bottom socket only. MMBCB Kit replaces existing meter cover preventing access to meter socket. Includes hasp for seal. Used on 00 ampere stacks. Fits bottom socket only. MMBC00B Kit replaces existing meter cover preventing access to meter socket. Includes hasp for seal. Wall Mounting Rail Rails are feet (. m) in length. Bolted on wall for stacks, packs, and mains to be hung. MMWB Fifth Jaw Kit Bypass Kit Lexan Blank Cover Wall Mounting Rail INNER-TITE is a registered trademark of Inner- Tite Corp. Lexan is a registered trademark of General Electric Co., USA. UL is a registered trademark of Underwriters Laboratories Inc. EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E Copyright 007 7
Technical Data Knockout Drawings 00766CH 007666CH 007670CH, UTRTCH and UHTTRTCH 00898CH, UTRTCH and UHTTRTCH UTRSBCH and UHTTRSBCH 0088CH 00767CH, 0089CH and UTTH0TCH 00899CH, UTRTCH and UHTTRTCH UTRSACH and UHTTRSACH UTHTCH and UTH0TCH 0088CH FIGURE. KNOCKOUT DRAWINGS DRAWINGS NOT TO SCALE 8 EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E July 007
Knockout Drawings UTRTCH and UHTTRTCH 0088CH USTHACH UTR9TTCH and UHTTR9TTCH 00979CH 00969CH UT6R9TTCH and UHTT6R9TTCH 0096CH 00969CH 0098CH 009079CH and 00908CH 009697CH FIGURE. KNOCKOUT DRAWINGS DRAWINGS NOT TO SCALE EATON CORPORATION Cutler-Hammer Illinois and Northwest Indiana Metering Equipment Technical Focus TD00000E Copyright 007 9
Eaton Corporation Electrical Group 000 Cherrington Parkway Moon Township, PA 08 United States 877-ETN-CARE (877-86-7) Eaton.com 007 Eaton Corporation All Rights Reserved Printed in USA Publication No. TD00000E/ Z9 July 007