Cisco.Realtests.500-007.v2014-12-06.by.Edric.61q Number: 500-007 Passing Score: 853 Time Limit: 120 min File Version: 14.5 Exam Code: 500-007 Exam Name: Implementing Cisco TelePresence Video Solution, Part 1
Exam A QUESTION 1 The Cisco TCS provides which two functions? (Choose two.) A. records any standards-based video conferencing session B. records video from IP-based encoders C. can stream out live TelePresence sessions over IP networks D. allows users to upload videos for conversion into H.264 or MP4 C /Reference: QUESTION 2 Which two statements about the Cisco TCS are correct? (Choose two.) A. It contains an internal gatekeeper B. It allows creators to edit videos C. It runs on the Windows operating system D. It runs on the Linux operating system Correct Answer: BC /Reference: QUESTION 3 What are two ways to set the IP network information on the Cisco TCS? (Choose two.) A. DHCP B. statically set on its Windows operating system C. statically set on its Linux operating system
D. automatically assigned by the Cisco TelePresence Management Server B /Reference: QUESTION 4 What is the effect of registering the Cisco TCS with the Cisco VCS using H.323 gateway mode? A. The Cisco TCS does not support this type of registration B. An unlimited number of recording aliases can be assigned C. The Cisco TCS is prevented from making an outbound call to a Cisco MCU. D. The Cisco TCS can traverse calls between SIP and H.323 Correct Answer: B /Reference: QUESTION 5 Which two statements about Cisco TCS recording aliases are true? (Choose two.) A. System recording aliases can only be dialed by the site manager (administrator) B. Any recording alias can be triggered by dialing its assigned URI or E.164 number C. Recordings resulting from a personal recording alias can only be managed by their creator D. Final recordings made from a recording alias cannot be modified
Correct Answer: BC /Reference: QUESTION 6 Which of these constitutes a Cisco TCS recording alias? A. a recording template, a media server configuration, and a call configuration B. a media server configuration and a call configuration C. a recording template and a media server configuration D. a recording template and a call configuration /Reference: QUESTION 7 Which two statements about Cisco TCS users are true? (Choose two.) A. Users with the creator role can create their own recording aliases B. Local users have only limited Cisco TCS permissions C. Users can be assigned to the Cisco TCS through an Active Directory LDAP server D. User permissions are based on one of three assignable roles Correct Answer: CD /Reference: QUESTION 8
Which two statements about Cisco TCS recording templates are true? (Choose two.) A. Every recording alias contains one recording template B. They provide a way to produce recordings without a recording alias C. They must always contain a media server configuration D. There can only be one system recording template C /Reference: QUESTION 9 Which two of these can be found by navigating to TCS Diagnostic > Server Overview in the Cisco TCS web interface? (Choose two.) A. option key information B. recording port activity status C. Cisco VCS registration status D. which Cisco TMS is managing the TCS B /Reference: QUESTION 10 Cisco TCS recordings can be encoded into which two video formats? (Choose two.) A. MPEG-4 for Flash and QuickTime B. WMV C. H.262 D. Sorensen VP8 for Flash B
/Reference: QUESTION 11 You have configured your Cisco TelePresence Codec C90 but discover unwanted noise during use. What best practice will help avoid this problem? A. Connect only one device at a time to an input and avoid daisy-chaining. B. Recycle the power on your system after adding each additional input C. If you are not using an input, turn it off. D. Daisy-chain additional devices using a serial cable to provide separate power supplies Correct Answer: C /Reference: QUESTION 12 Refer to the exhibit. Which two letters represent input connections on the Cisco TelePresence Codec C90? (Choose two.) Exhibit:
A. A B. B C. C D. D E. E D /Reference: QUESTION 13 You want to reconfigure the H.323 and SIP settings using the remote control on the Cisco TelePresence Codec C90. Which menu allows you to do this? A. Audio input levels B. IP settings C. Advanced configuration
D. Protocol configuration Correct Answer: C /Reference: QUESTION 14 What do you need to do before an endpoint can place or receive H.323 calls using a URI address? A. Register the endpoint to the SIP server B. Register the endpoints to the gatekeeper C. Register the endpoint to the gateway D. Register the endpoint to the Cisco TelePresence MCU Correct Answer: B /Reference: QUESTION 15 Refer to the exhibit. You are installing a high-definition (720p or 1080p) monitor on the Cisco TelePresence Codec C90. Which of the outputs that are represented by letters in the exhibit should you use? Exhibit:
A. A or B B. A or D C. A or E D. B or C E. D or E Correct Answer: D /Reference: QUESTION 16 While on a call, using the remote control, how do you add an additional participant to a call on your MultiSite-enabled endpoint? A. Press the Home button to return to the menu, and select the Add Participant button B. Press and hold the End Call key to bring up the dialing menu. C. Press and hold the Call key to bring up the dialing menu.
D. Press the Call key, and choose or dial the number of the additional participant. Correct Answer: D /Reference: QUESTION 17 Which three are true statements regarding the Cisco TelePresence endpoint product set? (Choose three.) A. The MX200 and MX300 are all-inclusive systems and do not require additional AV components. B. The MX200 and MX300 are integrator codec systems and require additional AV components C. The EX60 and EX90 are room-based TelePresence systems intended for use in board rooms D. The C90 is a high end integrator codec E. The EX90 is an integrator codec. F. The C40 is a basic integrator codec supporting dual monitors DF /Reference: QUESTION 18 What are the two methods for pairing an 8-inch Cisco TelePresence Touch panel to a Codec C90? (Choose two.) A. Plug the cable that is attached to the Touch panel directly into the back of the Codec C90 B. Plug the provided Ethernet cable from the Touch panel power supply into the second Ethernet port on the Codec C90 C. Plug the provided Ethernet cable from the Touch panel power supply into the LAN and pair over the network D. Use the built-in wireless on the Touch panel to pair over the network Correct Answer: BC
/Reference: QUESTION 19 Which statement is true regarding passwords on a Cisco TelePresence MX, EX, C Series, or SX20 device? A. The device ships from factory with the admin account enabled, with no password B. The device ships from factory with the admin account enabled, with a default password of CISCO C. The device ships from factory with the admin account enabled, with a default password of TANDBERG D. The device ships from factory with the root account enabled, with no password /Reference: QUESTION 20 When configuring a Cisco TelePresence EX, MX, or C Series device, which two statements are true? (Choose two.) A. The unit can be completely configured from the web interface B. If available, the TRC5 remote control can be used to completely configure the unit C. The API must be used in order to configure the unit D. The Touch panel can be used to completely configure the unit B /Reference: QUESTION 21 If the user purchases the Cisco TelePresence Touch panel, which two statements are true? (Choose two.) A. Both the TRC5 remote control and the Touch panel can be used simultaneously B. Either the TRC5 remote control or the Touch panel can be used, but not both simultaneously C. The Touch panel should be used to make calls, but the TRC5 remote control should be used to configure the unit
D. The web interface can be used to configure the unit Correct Answer: BD /Reference: QUESTION 22 If you do not have the Premium Resolution option installed on a Cisco TelePresence endpoint, what is the maximum resolution that you can transmit and receive? A. 1080p30 B. 720p60 C. 720p30 D. Standard definition resolutions only Correct Answer: C /Reference: QUESTION 23 When using the Cisco TelePresence Touch panel with a Codec C90, which Administrator settings can you access? A. all of the same Administrator settings as when using the TRC5 remote B. a limited subset of the Administrator settings compared with using the TRC5 remote C. none of the Administrator settings D. only the Custom Video Layout settings Correct Answer: B /Reference:
QUESTION 24 Which two settings can be configured using the serial connection when you are running the Cisco TelePresence VCS install wizard? (Choose two.) A. device name B. device ID number C. IP address D. password E. default video codec Correct Answer: CD /Reference: QUESTION 25 What can you see on the Status > Registrations > By Device page? A. currently registered SIP and H.323 devices B. all devices that were registered for SIP or H.323 since the last reboot C. currently registered H.323 devices only D. currently registered SIP devices only /Reference:
QUESTION 26 Which feature or features will work on a new Cisco TelePresence VCS as soon as the IP configuration is done? A. H.323 B. H.323 and SIP C. H.323, SIP, and Interworking D. H.323, SIP, Interworking, and Firewall Traversal /Reference: QUESTION 27 Which of these options shows the methods that are available to configure a Cisco VCS appliance at initial installation? A. CLI over serial port, web interface, keyboard and monitor B. CLI over serial port, web interface, LCD panel C. CLI over serial port, web interface, boot disk D. using the Cisco Prime Collaboration Manager, after running 'system discovery' to discover the newly added Cisco VCS Correct Answer: B /Reference: QUESTION 28 The Cisco VCS Starter Pack Express supports which two features that are not found in a Cisco VCS Control? (Choose two.) A. Jabber for ipad support B. Expressway server C. local device authentication D. built-in provisioning
Correct Answer: BD /Reference: QUESTION 29 In the SIP configuration, which two items need to match in the Cisco TelePresence VCS configuration and the endpoint configuration? (Choose two.) A. service prefix B. Cisco VCS IP address C. DNS server D. SIP domain Correct Answer: BD /Reference: QUESTION 30 Which two interworking functions are supported on the Cisco VCS? (Choose two.) A. SIP-to-H.323 B. IPv4-to-IPv6 C. H.323-to-H.320 D. firewall traversal B /Reference: QUESTION 31 Which statement is true when H.323 and SIP interworking is set to on in the Cisco TelePresence VCS?
A. The Cisco TelePresence VCS will act as a SIP-to-H.323 gateway regardless of whether one of the endpoints is locally registered. B. The Cisco TelePresence VCS will act as a SIP-to-H.323 gateway only if one of the endpoints is locally registered C. The Cisco TelePresence VCS will not act as a SIP-to-H.323 gateway D. The Cisco TelePresence VCS will permit all traffic from any H.323 or SIP endpoint that is registered locally /Reference: QUESTION 32 Which type of account needs to be set up to create a Cisco TelePresence soft client (such as Cisco Jabber or Movi) user if you are using the Cisco TelePresence VCS Expressway StarterPack? A. a local FindMe account on the Cisco VCS B. a local admin account on the Cisco VCS C. an LDAP user account on Active Directory D. an LDAP FindMe account on Active Directory /Reference: QUESTION 33 Which of these must be enabled to set up a Cisco TelePresence soft client (such as Cisco Jabber or Movi) on a Cisco TelePresence VCS Expressway Starter Pack? A. SIP B. H.323 C. interworking D. Multiway
/Reference: QUESTION 34 Which two of these are required for restoring a backup to another Cisco VCS? (Choose two.) A. the same version of software of as the original Cisco VCS B. the same basic IP address settings C. an empty configuration on the Cisco VCS D. the same option keys D /Reference: QUESTION 35 How are firewall traversal connections established between the Cisco TelePresence VCS Expressway and Control? A. The traversal client establishes connections outbound to the traversal server B. The traversal server establishes connections inbound to the traversal client C. Connections are established in both directions from the traversal server to the traversal client D. The traversal server negotiates acceptable connection ports with the firewall /Reference: QUESTION 36 Which command is used to set the IP configuration for a Cisco TelePresence MCU 5300?
A. status IP address netmask default GW B. xconfigure IP address netmask default GW C. static IP address netmask default GW D. set IP address netmask default GW DNS server address Correct Answer: C /Reference: QUESTION 37 If the zones in a VCS firewall traversal solution are established, what else is needed before connections can be established in both directions? A. A call policy must be established B. VCS search rules must be created for each zone C. The VCS control and the VCS expressway must be neighbored D. Transforms must be created in the VCS traversal server zone Correct Answer: B /Reference: QUESTION 38 What does an endpoint system use to navigate the Auto Attendant menu on the Cisco TelePresence MCU? A. FECC or DTMF navigation B. a special remote that came with the Cisco TelePresence MCU C. only FECC; DTMF is not supported D. web interface of the endpoint
/Reference: QUESTION 39 If an auto attendant has a numeric ID of 543 and the Cisco TelePresence MCU has a prefix of 62 and a domain of cisco.demo, which two of these will be registered on the Cisco TelePresence VCS, assuming that SIP and H.323 registration have been selected? (Choose two.) A. 62543 B. 543@cisco.demo C. 543 D. 62543@cisco.demo E. 543@62.cisco.demo B /Reference: QUESTION 40 How can you register a prefix to route all SIP calls beginning with that prefix to the Cisco TelePresence MCU? A. You cannot; all SIP addresses must be registered individually. B. The H.323 prefix is automatically used. C. You cannot; you need to use a suffix in the form of a domain D. The username is used as the suffix /Reference: QUESTION 41 What does the Cisco TelePresence MCU service prefix do?
A. ensures that all H323 calls beginning with the prefix are routed to the Cisco TelePresence MCU B. is added to all aliases before registration C. diverts calls to the default auto attendant D. identifies which services the Cisco TelePresence MCU will offer in each configured meeting room /Reference: QUESTION 42 How does an administrator move an endpoint efficiently from one conference to another on a Cisco TelePresence MCU? A. From the Move Participants screen, right-click the participant and select the new conference from the drop-down list. B. From the Move Participants screen, drag and drop a participant from one conference to another. C. From the Conference menu, select the participant, and then select the new conference D. From the web interface, disconnect the participant, and then reconnect manually to the new conference. Correct Answer: B /Reference: QUESTION 43 By which two ways can an endpoint join a conference on the Cisco TelePresence MCU? (Choose two.) A. dialing a registered alias for the conference B. dialing the auto attendant and navigating to the conference C. dialing an endpoint that is already in the conference D. dialing all endpoints that are required in the conference E. dialing the PIN number of the conference B
/Reference: QUESTION 44 What effect does the 'Prefix for MCU Registrations' have on Cisco TelePresence MCU registration? A. The prefix replaces the domain if the prefix is dialed B. The prefix is placed in front of all SIP URIs. C. Anything that is dialed with the prefix will be routed to the Cisco TelePresence MCU D. The prefix is placed in front of all E.164 aliases Correct Answer: D /Reference: QUESTION 45 What is the maximum port capacity of the 5320 MCU? A. 5 HD+ or 10 HD or 20 SD or 24 nhd B. 1 HD+ or 2 HD or 4 SD or 8 nhd C. 10 HD+ or 20 HD or 40 SD or 48 nhd D. 20 HD+ or 40 HD or 80 SD or 96 nhd Correct Answer: C /Reference: QUESTION 46 How many rack units does a Cisco TelePresence MCU 5300 occupy in a standard data center rack? A. 1
B. 2 C. 3 D. 4 /Reference: QUESTION 47 Using the web interface, where can you verify the licensing on a Cisco TelePresence MCU 5300? A. Settings > Upgrade B. Settings > Conferences C. Settings > Content D. Status > Help /Reference: QUESTION 48 How many endpoints can register to the built-in H.323 gatekeeper of a Cisco TelePresence MCU 5300 Series device? A. none; there is no built-in gatekeeper B. 25 C. 100 D. 300 /Reference:
QUESTION 49 How should you configure the IP address and default gateway on a Cisco TelePresence MCU 5300 Series device during setup? A. Connect an Ethernet cable to the second Ethernet port of the MCU, and point your web browser to 192.168.2.2. B. Console into the serial port in the front panel, and use the static command C. Use the arrows next to the LCD in the front to change the IP address, subnet mask, and default gateway. D. Change it from the Cisco VCS. Correct Answer: B /Reference: QUESTION 50 How do you upgrade the software of an existing installation with a Cisco TelePresence MCU 5300? A. Download the new software, navigate to Maintenance > Upgrade Software, and upload the software B. Use FTP to access the MCU, browse to the /etc/software/upgrade directory, put the new load in, and reboot the MCU C. Navigate to Settings > Upgrade, then follow instructions under Main Software Image. D. Use an SFTP client to log in to the MCU, and place the software in the /etc/software/upgrade directory Correct Answer: C /Reference: QUESTION 51 How do you obtain a SIP log from the Cisco TelePresence MCU 5300 to send to Cisco TAC for further analysis? A. Navigate to Maintenance > Logs, and then download the log B. Navigate to Logs > Event Log > SIP Details, and then download the log C. Navigate to Logs > H.323/SIP Log, click Enable H323/SIP Logging, and then download the log. D. Use FTP to access the MCU, go to the directory /etc/logs/sip, and get all the files in that directory
Correct Answer: C /Reference: QUESTION 52 What is one way that a conference participant's screen layout be changed without affecting other participants? A. via the participant settings in the MCU 5300 web interface B. via the conference settings in the MCU 5300 web interface C. by the nominated chair endpoint using FECC D. by moving the participant into a different meeting using the MCU 5300 web interface /Reference: QUESTION 53 What are two ways that a conference participant can be disconnected from a conference? (Choose two.) A. by using the MCU 5300 web interface B. will be automatically disconnected at the end of the allotted time C. by the auto attendant D. will be disconnected when the conference exceeds its maximum capacity B /Reference:
QUESTION 54 Before you upgrade your Cisco TelePresence Management Suite, what should you do with your SQL database? A. Save a backup. B. Restore a previous version. C. Set a new username and password. D. Create a second copy. /Reference: QUESTION 55 Which installation option should you choose if you wish to use an external SQL database? A. Complete B. Custom C. Advanced D. Basic Correct Answer: B /Reference:
QUESTION 56 If you do not have a valid release key, what restriction will be applied? A. The Cisco TelePresence Management Suite will only manage three systems B. Installation will fail and the Cisco TelePresence Management Suite will not be installed C. The Cisco TelePresence Management Suite will only operate for 30 days D. The SQL database will be purged every 30 days. /Reference: QUESTION 57 Where would you enter release and option keys into the Cisco TelePresence Management Suite? A. in Configuration > General Settings B. on the portal page C. through the release key generator in a terminal session on the server D. on the Cisco TelePresence Manager Suite server maintenance page /Reference: QUESTION 58 When a new conference is booked on the Cisco TelePresence Management Suite, which setting instructs the endpoint or Cisco TelePresence MCU to call a participant at the time of a conference? A. Manual B. Call-in Only C. Reverse Call D. Automatic
Correct Answer: D /Reference: QUESTION 59 By which three ways can systems be added in the Cisco TelePresence Management Suite? (Choose three.) A. by preregistering systems B. from a.csv file C. by importing from a Cisco TelePresence VCS D. by user-configured name E. by dialing an endpoint F. by IP address G. from a list of previously discovered systems FG /Reference: QUESTION 60 You want to obtain specific configuration details from each of the systems that are registered to your Cisco TelePresence Management Suite. Where can you do this? A. Choose Navigator from the Systems menu. B. Choose System Overview from the Systems menu. C. Run System Tracking from the Systems menu. D. Connect to the Cisco TelePresence Management Suite via a console connection and use show commands Correct Answer: B
/Reference: QUESTION 61 After you create a phone book in the Cisco TelePresence Management Suite, which method should you use to populate it with entries? A. Connect the phone book to a phone book source B. Manually type entries into the phone book C. Connect the phone book to a gatekeeper D. Upload a file in.mdf format /Reference: