RS-1260 Digital Signage Player

RS-1260 Digital Signage Player User Manual V1.3

Legal Notice and Disclaimer Thank you for choosing RapidSignage products. This user manual provides a description of the Player relevant guidelines for key functions. Please read this document carefully and adhere to its instructions. Legal Notice All features, functionality, and other product specifications are subject to change without prior notice or obligation. Information presented is subject to change without notice. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, mechanical, electronic, photocopying, recording, or otherwise, without prior written permission of RapidSignage Inc. RapidSignage and the RapidSignage logo are registered trademarks of RapidSignage Inc. Other products and company names mentioned herein may be the trademarks of their respective companies. Disclaimer In no event shall RapidSignage Inc. liability exceed the price paid for the product from direct, indirect, special, incidental, or consequential damages resulting from the use of the product, its accompanying software, or its documentation. RapidSignage makes no warranty or representation, expressed, implied, or statutory, with respect to its products or the contents or use of this documentation and all accompanying software, and specifically disclaims its quality, performance, merchantability, or fitness for any particular purpose. RapidSignage reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity.

For technical questions, please contact support@rapidsignage.com Website http://www.rapidsignage.com

Table of Contents 1. Getting Started... 5 1.1. I/O Layout... 5 1.2. Connecting to Player... 6 1.3. Typical Setup Procedure... 8 1.4. Player User Interface Overview... 9 2. Screen Config... 11 2.1. Normal Mode... 11 2.2. Irregular Mode... 12 2.3. Supported Video Wall Matrix... 14 3. Design... 24 3.1. New Design... 24 3.1.1. Media List... 27 3.1.2. Widgets... 29 3.1.3. Application References... 42 3.2. Load Design... 48 4. Plan... 49 4.1. Create a New Plan... 49 4.2. Load Plan... 52 4.3. Export Plan... 53 5. Player Management... 54 5.1. Overview... 54 5.2. System Configure... 55 9.1. Logs... 62

1. Getting Started 1.1. I/O Layout 3 1 52 4 6-1 6-2 7 8 9 1 Power Button 2 COM Ports (x2) 6-1 6-2 LAN -1 LAN -2 3 Display Ports (x15) 7 USB 3.0 (x2) 4 Power Switch 8 USB 2.0 (x4) 5 AC in 9 Audio Out

1.2. Connecting to Player Direct Connect RS-1260 LAN-2 Default IP Address: 192.168.100.1, Netmask: 255.255.255.0 Change the PC/Laptop network TCP/IP Address to 192.168.100.2 and the same network mask. User Chrome and connect to http://192.168.100.1 Default login name and password are both admin.

DHCP Connect If you want the Player connect to a DHCP network, you need to directly connect with Player first and change the networking setting of the Player: 1. Connect the LAN cable to LAN-1 to use a DHCP connection 2. Click SystemConfig on the main page of Player, then click Network config Tab. 3. Double-click textbox of DHCP and make sure DHCP is turned on, then Click Apply. 4. Click Power tab, and click Reboot button to reboot the Player. 5. After reboot, the Player IP address will be displayed on the boot screen. Example: Change the RS-1260 into the diagram below: AP / Router / Switch

1.3. Typical Setup Procedure Step 1 Screen Mode Setting: Click Screen Config on the Player user interface to setup screen mode. For more information, please refer to 2. Screen configure. Step 2 Start Design: Click New Design to create a new content design, or click Load Design to load an existing Design to edit. For more information, please refer to 3. Design. Step 3 Creating a Plan: Click New Plan to setup a new content playback schedule, or click Load Plan to load an existing Plan to edit. For more information, please refer to 4. Plan. Step 4 Save and Publish: Click Save to save the plan to publish for playback immediately.

1.4. Player User Interface Overview 1. Language Setting The Player supports multiple languages, including: English Traditional Chinese Simplified Chinese Japanese Korean Spanish German Click Language and the selection list appears. This user interface will switch to selected language. 2. Screen Config Setting of the Player s display matrix, resolution, rotation, and bezel compensation.

3. New Design Design the uploads and page Design of videos, pictures, advertising, and other media materials to be displayed. 4. Load Design Loading and modify existing Design. 5. New Plan Arrange the schedule of the Designs. 6. Load Plan Load an existing Plan. 7. Export Plan Export a Plan for manual update. 8. Overview Shows the information of Player, including the version and the system status. 9. Logout Click at the right top of Main page of Player, then select Logout to exit Player.

2. Screen Config 2.1. Normal Mode B A G C D E F FEATURE DESCRIPTION A Cols Click Cols then select the number of the display devices from the drop down. Rows Click Rows then select the number of the display devices from the drop down. B Horizontal Enter horizontal and vertical value of border between each Vertical monitor. Note: Use only for adjust Bezel Compensation function. C Resolution Click Resolution then set resolution of the Canvas. (Too high resolution will decrease the performance of system. Please set proper resolution according to the performance of your hardware

system.) Selections include: 4096 x 2160, 3840 x 2160, 3200 x 1800, 2560 x 1920, 2560 x 1440, 1920 x 1080 (default), 1600 x 1200, 1600 x 800, 1440 x 1080, 1440 x 1050, 1366 x 768, 1360 x 768, 1280 x 1024, 1280 x 800, 1280 x 720, 1024 x 768, 854 x 480, 800 x 600, 720 x 480, 640 x 480 D Rotation Click Rotation then set the screen to Landscape mode or Portrait mode. E Identify Start Press Identify Start to identify the physical screens. F Bezel Start Press Bezel Start and drag to change the bezel value. G Apply When you have completed any changes, click Apply to finish all the screen setting. 2.2. Irregular Mode A B C D

FEATURE DESCRIPTION A Virtual Size Enter the resolution of the Canvas B Screen ID Double click a screen icon to open up the Screen Properties. D Add Screen Click Add Screen to set up the positioning of the display, Screen Resolution and aspect ratio of the display. D Apply When you have completed any changes, click Apply to finish all the screen setting. The buttons at the top of page A B C D Buttons DESCRIPTION A Menu Click Menu to return to the main page of Player. B Overview Click Overview to go to System Information page directly. C Logs Click Logs to go to Logs page directly. D System Config Click System Config to go to System configure page directly.

2.3. Supported Video Wall Matrix

3. Design 3.1. New Design With this option, user can design to the whole Canvas, and use the intuitive drag and drop operation to adding objects on Canvas. B A C A B C Media list Media Widget bar Canvas 1. Compose the Design Step 1: Upload Files to Media list. Step 2: Click and hold Widgets from the Widget bar or Media from the Media list, then drag and drop it to a location on the Canvas. Step 3: Property window will pop up for user to set the Widget, or Right click on the Widget then select Properties to setting.

Step 4: Click Save at the top of Design page then enter the Design name and Description. Step 5: Click Save as Design. 2. Right-click menu of Media objects Right click of the Widget, then right-click menu appears. This menu provides user to modify Widget s Properties, assign its Playlist and Delete the Widget from the Canvas. 3. Adding a Playlist A playlist is a sequence of Widget that you choose for display in a zone. Each zone has its own playlist and runs independently of other playlists. To create a playlist with multiple Widget objects, follow these steps: Step 1: Click on a Widget in the Media widget bar, and drag and drop the Widget onto the Canvas. Step 2: then click on a Widget and drag and drop it onto the first Widget, then playlist dialog appears, click OK. Step 3: Right click of playlist to change duration of a Widget or change Widget order in this playlist.

The buttons at the top of Design page A B C D E F FEATURE DESCRIPTION A Menu Click Menu to return to Main page of Player. B New Click New to create new Design, if user is not finishing current Design, please Save it before exiting from this page. C Load Click Load Then Designer dialog appears, select existing Design file form list, then click Load Design to modify Design. D Save Click Save to save the new Design or design changes. E Delete Click Delete Then Delete design dialog appears, select one or more existing design file form list, then click Delete Design to delete Design. F RS Scheduler Click RS Scheduler to go to Plan page directly.

3.1.1. Media List A B FEATURE DESCRIPTION A B Upload files Remove file Click Upload to browse user s files on desktop, extra device and devices on the network directly. If user wants to remove the file from the list, please drag and drop the file to Delete button. Media Properties

FEATURE Media type Alias Media duration(sec) Volume DESCRIPTION Display the media type. Display the file name. To edit the time intervals, edit the Value by double clicking the cell and add the amount of seconds you want it to display. To edit sound volume, edit the Value by double clicking the cell and choosing a number between 1 and 10. X(Pixel) or Y(Pixel) To edit the location of the media to pixel perfection, find X(Pixel) or Y(Pixel) and edit the Value by double clicking the cell and adjusting the values. Width or Height To edit the width and height, find Width or Height and edit it to best fit your layout. Layer order To change the order of Layer in the Canvas.

3.1.2. Widgets HTML Text Text banner Image Analog clock Digital Clock RSS Streaming Capture in Queuing Remote Folder Live Data 1. HTML Widget: FEATURE Media type Media duration(sec) X(Pixel) or Y(Pixel) DESCRIPTION Display the media type. To edit the time intervals, edit the Value by double clicking the cell and add the amount of seconds you want it to display. To edit the location of the media to pixel perfection, find X(Pixel) or Y(Pixel) and edit the Value by double clicking the cell and adjusting the values. Width or Height To edit the width and height, find Width or Height and edit it to best fit your layout. Offset X or Offset Y Double click at Value next to the Offset X or Offset Y and it will shift the webpage s left / top corner. Layer order URL Reload To change the order of Layer in the Canvas. Enter the web site URL into the field. To edit webpage reload time (sec).

2. Text Widget: A widget to display static text content. FEATURE Media type Media duration(sec) X(Pixel) or Y(Pixel) DESCRIPTION Display the media type. To edit the time intervals, edit the Value by double clicking the cell and add the amount of seconds you want it to display. To edit the location of the media to pixel perfection, find X(Pixel) or Y(Pixel) and edit the Value by double clicking the cell and adjusting the values. Width or Height To edit the width and height, find Width or Height and edit it to best fit your layout. Layer order Foreground color Background color Opacity To change the order of Layer in the Canvas. To edit the text color. To edit background color of the text. To set Widget visible on the Canvas. The default is 255 that completely opaque and 1 is almost completely transparent. Text Enter the text into the field. Font size To edit the text size. The default is 70.

3. Text banner Widget: A widget to display scrolling text content. FEATURE Media type Media duration(sec) X(Pixel) or Y(Pixel) DESCRIPTION Display the media type. To edit the time intervals, edit the Value by double clicking the cell and add the amount of seconds you want it to display. To edit the location of the media to pixel perfection, find X(Pixel) or Y(Pixel) and edit the Value by double clicking the cell and adjusting the values. Width or Height To edit the width and height, find Width or Height and edit it to best fit your layout. Layer order Direction To change the order of Layer in the Canvas. Select text move direction, the selection includes: Right to Left (default), Left to Right, Bottom to Top, Top to Bottom Speed To edit the banner s speed. The default is 10. Foreground color Background color Opacity To edit the text color. To edit background color of the text. To set Widget visible on the Canvas. The default is 255 that completely opaque and 1 is almost completely transparent. Text Enter the text into the field. Font size To edit the text size. The default is 70.

4. Image banner How to Create image banner: Step 1: Click and hold Image banner Widget then drag and drop it to a location on the Canvas. Step 2: Create image window will pop up, drag image and drop it to the image area, click OK to close the dialog. FEATURE Media type Media duration(sec) X(Pixel) or Y(Pixel) DESCRIPTION Display the media type. To edit the time intervals, edit the Value by double clicking the cell and add the amount of seconds you want it to display. To edit the location of the media to pixel perfection, find X(Pixel) or Y(Pixel) and edit the Value by double clicking the cell and adjusting the values. Width or Height To edit the width and height, find Width or Height and edit it to best fit your layout. Layer order Direction To change the order of Layer in the Canvas. Select text move direction, the selection includes: Right to Left (default), Left to Right, Bottom to Top, Top to Bottom Speed To edit the banner s speed. The default is 10.

5. Analog clock Widget FEATURE Media type Media duration(sec) X(Pixel) or Y(Pixel) DESCRIPTION Display the media type. To edit the time intervals, edit the Value by double clicking the cell and add the amount of seconds you want it to display. To edit the location of the media to pixel perfection, find X(Pixel) or Y(Pixel) and edit the Value by double clicking the cell and adjusting the values. Width or Height To edit the width and height, find Width or Height and edit it to best fit your layout. Layer order To change the order of Layer in the Canvas. Template To change the clock template from Template 1 to 10. Offset (GMT) Opacity To edit the time zone. To set Widget visible on the Canvas. The default is 255 that completely opaque and 1 is almost completely transparent.

6. Digital Clock Widget FEATURE Media type Media duration(sec) X(Pixel) or Y(Pixel) DESCRIPTION Display the media type. To edit the time intervals, edit the Value by double clicking the cell and add the amount of seconds you want it to display. To edit the location of the media to pixel perfection, find X(Pixel) or Y(Pixel) and edit the Value by double clicking the cell and adjusting the values. Width or Height To edit the width and height, find Width or Height and edit it to best fit your layout. Layer order Offset (GMT) Foreground color Background color Opacity To change the order of Layer in the Canvas. To edit the time zone. To edit the time text color. To edit background color of the time text. To set Widget visible on the Canvas. The default is 255 that completely opaque and 1 is almost completely transparent. Font size To edit the text size. The default is 70. Format string To change the Format string, EX: (HH:mm:ss MM-dd-yyyy) or yyyy-mm-dd HH:mm:ss (default) etc.

7. RSS Widget User can display newsfeeds from external sources on the Player. FEATURE Media type Media duration(sec) DESCRIPTION Display the media type. To edit the time intervals, edit the Value by double clicking the cell and add the amount of seconds you want it to display. X(Pixel) or Y(Pixel) To edit the location of the media to pixel perfection, find X(Pixel) or Y(Pixel) and edit the Value by double clicking the cell and adjusting the values. Width or Height To edit the width and height, find Width or Height and edit it to best fit your layout. Layer order Foreground color Background color To change the order of Layer in the Canvas. To edit the text color. To edit background color of the text. Opacity To set Widget visible on the Canvas. The default is 255 that completely opaque and 1 is almost completely transparent. Direction Select text move direction, the selection includes: Right to Left (default), Left to Right, Bottom to Top, Top to Bottom Speed To edit the RSS banner s speed. The default is 10. Font size To edit the text size. The default is 70. URL Enter the RSS website address into the field.

(for example, http://www.xxx.com/xxx.xml). DESIGNER_PROP_REFRESH_TIME To edit website reload time. (second). The default is 600.

8. Streaming Widget Support the Real Time Streaming Protocol (RTSP). The Streaming widget can receive the live streaming from IP-cam or streaming support. FEATURE Media type Alias Media duration(sec) DESCRIPTION Display the media type. Display the live streaming name. To edit the time intervals, edit the Value by double clicking the cell and add the amount of seconds you want it to display. Volume To edit sound volume, edit the Value by double clicking the cell and choosing a number between 1 and 10. X(Pixel) or Y(Pixel) To edit the location of the media to pixel perfection, find X(Pixel) or Y(Pixel) and edit the Value by double clicking the cell and adjusting the values. Width or Height To edit the width and height, find Width or Height and edit it to best fit your layout. Layer order URL To change the order of Layer in the Canvas. Enter the live streaming address into the field. Ex: IP camera address or RTSP server address...etc.

9. Capture in Widget Support USB webcam and HDMI-in. FEATURE Media type Alias Media duration(sec) DESCRIPTION Display the media type. Display the live streaming name. To edit the time intervals, edit the Value by double clicking the cell and add the amount of seconds you want it to display. Volume To edit sound volume, edit the Value by double clicking the cell and choosing a number between 1 and 10. X(Pixel) or Y(Pixel) To edit the location of the media to pixel perfection, find X(Pixel) or Y(Pixel) and edit the Value by double clicking the cell and adjusting the values. Width or Height To edit the width and height, find Width or Height and edit it to best fit your layout. Layer order Capture Input To change the order of Layer in the Canvas. The Capture Input type selection includes: HDML1, HDML2, Webcam

10. Queueing Widget FEATURE Media type Queueing type DESCRIPTION Display the media type. The Queueing type selection includes: Multiple Rows, Single Rows Media duration(sec) To edit the time intervals, edit the Value by double clicking the cell and add the amount of seconds you want it to display. Volume To edit sound volume, edit the Value by double clicking the cell and choosing a number between 1 and 10. X(Pixel) or Y(Pixel) To edit the location of the media to pixel perfection, find X(Pixel) or Y(Pixel) and edit the Value by double clicking the cell and adjusting the values. Width or Height To edit the width and height, find Width or Height and edit it to best fit your layout. Layer order Foreground color Background color Opacity To change the order of Layer in the Canvas. To edit the text color. To edit background color of the text. To set Widget visible on the Canvas. The default is 255 that completely opaque and 1 is almost completely transparent. Group Number Text To edit group number. To edit data Value number, Ex: #VALUE1#, #VALUE2#, #VALUE3#... Font size To edit the text size. The default is 70.

11. Remote Folder Widget FEATURE Media type Media duration(sec) DESCRIPTION Display the media type. To edit the time intervals, edit the Value by double clicking the cell and add the amount of seconds you want it to display. X(Pixel) or Y(Pixel) To edit the location of the media to pixel perfection, find X(Pixel) or Y(Pixel) and edit the Value by double clicking the cell and adjusting the values. Width or Height To edit the width and height, find Width or Height and edit it to best fit your layout. Layer order Server IP address To change the order of Layer in the Canvas. Enter the source link. Ex: 192.168.100.2 Remote path Enter the share folder of the server. Ex: /share Username Enter the username to login to folder. if the folder access without username and password, please enter guest and don t need to enter the password. Password Sync Interval Image duration Video duration Enter the password to login to folder. To edit Synchronize interval time (sec). To define the time duration of the images. To define the time duration of the Video.

12. Live Data Widget FEATURE Media type Media duration(sec) DESCRIPTION Display the media type. To edit the time intervals, edit the Value by double clicking the cell and add the amount of seconds you want it to display. X(Pixel) or Y(Pixel) To edit the location of the media to pixel perfection, find X(Pixel) or Y(Pixel) and edit the Value by double clicking the cell and adjusting the values. Width or Height To edit the width and height, find Width or Height and edit it to best fit your layout. Layer order Foreground color Background color Opacity To change the order of Layer in the Canvas. To edit the text color. To edit background color of the text. To set Widget visible on the Canvas. The default is 255 that completely opaque and 1 is almost completely transparent. Text Display the text from Live Data file. Font size To edit the text size. The default is 70. Source Type To choose source type. The Capture Input type selection includes: CSV, JSON, XML Source Link Enter the source link. Ex: http://192.168.100.2/xxx/xxx.csv Data mapping Enter target data. Ex: { "col": 2, "row": 3 } Refresh Interval To edit refresh interval time (sec).

3.1.3. Application References Live Data Widget User can use Live Data Widget to publish or change price of products from server to Players. Server IP: 52.xxx.xxx.1 Player (Live Data Widget) Players menuboard.csv Step 1: Create the products price file (ex, menuboard.csv) and save to Server (ex, row 1 row 2 row 3 row 4 row 5 52.xxx.xxx.1). Content of menuboard.csv col 1 col 2 Step 2: Link to Player and create New Design. Step 3: Drag and drop to adding Live Data Widget on Canvas, then change properties, for example: Source Type: CSV Source Link: http://52.xxx.xxx.1/menuboard.csv Data Mapping: { "col": 1, "row": 2 }

Step 4: Close the property window, the Live Data Widgets will show PIZZA wording. Step 5: Click Save to finish Design. Step 6: Creating a Plan and Publish Plan. { "col": 1, "row": 2 }{ "col": 2, "row": 2 } { "col": 1, "row": 6 } { "col": 2, "row": 6 }

Remote Folder Widget User can use Remote Folder Widget to publish images or videos from server to Players. Server IP: 52.xxx.xxx.1 Player (Remote Folder Widget) Players /share Step 1: Create the folder and set up folder sharing (ex, share) Step 2: Import images and video to this folder. Content of share folder Step 3: Link to Player and create New Design. Step 4: Drag and drop to adding Remote Folder Widget on Canvas, then change properties, for example: Server IP Address: 52.xxx.xxx.1 Remote path: /share Username: user_1 Password: a12345

if the folder access without username and password, please enter guest and don t need to enter the password. Step 5: Close the property window and click Save to finish Design. Step 6: Creating a Plan and Publish Plan. Remote Folder Widget

Queueing Widget User can use Queueing Widget and command tools to design your Queueing program. Step 1: Copy the Queueing command tool file to Server (ex, C:\), and Unzip RsTcpCommand.rar. Content of RsTcpCommand folder Step 2: Link to RS-CMS and create New Design. Step 3: Drag and drop to adding Queueing Widget on Canvas, then change properties. Text content: NO.#VALUE1# please come to the Counter. Step 4: Close the property window and click Save to finish Design.

Step 5: Click Save to finish Design. Step 6: Creating a Plan and Publish Plan. Step 7: Opening Command Prompt, then change to C:\RsTcpCommand directory. Step 8: Enter command: RsTcpCommand 192.168.99.119 7898 "{ \"GROUP\" : \"GROUP1\", \"KEY\" : \"VALUE1\", \"VALUE\" : \"125\",\"ACTION\" : \"QUEUEING_SET\" }" The player screen: Player IP address

3.2. Load Design To modifying existing Design please follow these steps: Step 1: Click Load Design from Main page of Player or button at the top of Design page. Step 2: Then Designer dialog appears. Step 3: Select existing Design file from list, then click Load Design to modify Design.

4. Plan With Plan option is providing user to control which Designs are displayed on what days and at what times and how often by creating a Schedule. 4.1. Create a New Plan A B A B Design list Timetable To create a new Plan please follow these steps: Step 1: Click Plan from Main page of Player. Step 2: Drag Design file from Design list and drop it onto Timetable. Step 3: Double click the Plan of Timetable, then Plan dialog appears. Step 4: To define the star and end date and time. Step 5: Click Apply to confirm and close Plan dialog.

To assign two or more Design to a Plan please follow these steps: Step 1: Click Plan from Main page of Player. Step 2: Drag Design file from Design list and drop it onto Timetable. Step 3: Drag second Design file from Design list and drop it onto the first Plan. Step 4: Double click the Plan of Timetable, then Plan dialog appears. Step 5: To define the star and end date and time. Step 6: Click Apply then Click Save (the button at the top of Plan page). To delete the content of Plan please follow these steps: Step 1: Double click the Plan of Timetable, then Plan dialog appears. Step 2: Click to delete the content in Sequence. To delete the Plan please follow these steps: Step 1: Double click the Plan of Timetable, then Plan dialog appears. Step 2: Click Delete to delete the plan.

The buttons at the top of Plan page A B C D E FEATURE DESCRIPTION A Menu Click Menu to return to Main page of Player. B New Click New to create new Plan, if user is not finishing current Plan, please Save it before exiting from this page. C Load Click Load then Planner dialog appears, select existing Plan file from list, then click Load Plan to modify Design. D Save Click Save to save the new Plan or Plan changes. E RSDesigner Click RSDesigner to go to Design page directly.

4.2. Load Plan To modifying existing plan please follow these steps: Step 1: Click Load Plan from Main page of Player or button at the top of Plan page. Step 2: Then existing Plan will appears.

4.3. Export Plan With Export Plan option is provide user to export Plan file from Player to Local disk. To export Plan please follow these steps: Step 1: Click Export Plan from Main page of Player. Step 2: Then Export Plan dialog appears. To import plan to Player please follow these steps: Step 1: Copy the export plan file to USB device, and Unzip rs_export.zip. Step 2: Connect USB device to Player. Step 3: Waiting for plan upload to Player, and it will be playing schedule automatically. Note: The default directory by export is C:\Users\Username\Downloads.

5. Player Management 5.1. Overview The page provides details of the environmental performance of your Player. The display contains the following information Tab System info DESCRIPTION View the Player information, including: Player name, firmware version, Current Plan and Current Design. CPU/RAM Status Network View the current CPU loading and the current memory size status. View current Network setting, including: IP address, MAC address. etc. To change network setting please refer to 5.2. System Configure/ Network Configure. Graphics Storage View the all screen configure. View the storage capacity and The % of total storage used by the Player.

5.2. System Configure 1. Power The main use of the Power On and Power Off are for scheduling the Player. To Reboot and Shutdown please follow these steps: Step 1: Click Reboot or Shutdown then the dialog appears. Step 2: Click OK, the Player will Reboot or Shutdown immediately. To setting Power Schedule please follow these steps: Step 1: Choose Time from the drop-down list. Step 2: Drag the Hour or Minute bar left or right, user also can enter time in the textbox at the top of the drop-down list, then Click Done.

Step 3: Then select power action and date. Step 4: Click Add, this power schedule will add in the Task list. To Edit Power Schedule please follow these steps: Step 1: Select currently schedule from the task list. Step 2: Click Edie to the setting. Step 3: Click the Save button. To Delete Power Schedule please follow these steps: Step 1: Select currently schedule from task list. Step 2: Click Delete to remove this schedule.

2. Playback User can stop or restart Player from this page, and also to set Audio output. 3. Register Information Tab Download Register DESCRIPTION User can click Apply to download register information. Information License Key To Register the License key and unlock all features of the player. For technical questions, please contact support@rapidsignage.com Player Information User can change player name from this option.

4. Server Information The Pairing Key of Player provides Player pair to RS-CMS Server. a Player only pair an Player at the same time. To Register a player to The RS-CMS server please follow these steps: Step 1: Check IP address of the RS-CMS server. Step 2: Check Pairing Key from the RS-CMS server. please refer to the RS-CMS user s manual. Step 3: Enter the IP address and Pairing Key of the RS-CMS. Step 4: Then click Apply.

5. Change Password User can change administer password with this option. 6. Network Configure Use the Network options to configure and check the Player network connection. To change IP address please follow these step: Step 1: Double click textbox of IP address to change IP address. Step 1: Then click Apply.

7. Date/Time Configure Use the Date/Time option to configure the time source and time zone for Player. Best for accuracy that requires the Player to have network connection to an extremal NTP server. If you chose on of the NTP methods, you must enter the URL of at least one NTP server

8. Log configure A log file is a file that records either events that occur in an Player. Click Log Enable to enable this function, and set up log size. About content please refer to 5.3 Logs. 9. System Upgrade From the menu, choose the Firmware Upgrade item to select the file, then click Apply to start to upgrade firmware. Note: If Reset Database is checked, all media, designs, and schedules in the system will be deleted.

9.1. Logs Choose the Logs and the System Logs screen appears. This screen shows a history of system usage and important events such as recent login information for all the users, and system booting. The event log appears in reverse order which means the latest event log shows first. With this option also provides user to export all configurations to a zip file. Note: The default directory by export is C:\Users\Username\Downloads.