Wall-mount box mini DATA SHEET DB4124-E Issue C Page 1 of 1 For indoor use. For termination of optical connectors. Prepared for splicing of pigtails (splice holder included). Adapter plates exists for most connector types. Optional clips for mounting on DIN profile. Description A simple indoor wall-mount box for termination of cables. Incoming cable may be directly terminated using field connectors (e.g. FAST, UniCam, LightCrimp Plus) or by splicing pigtails. Splice holder for securing the crimp sleeves when splicing pigtails and fibre guides for routing the fibre are included. An adapter plate must be ordered separately - depending on wanted connector type. The box has 2 round cable entrances and glands for both are included. Specifications Material: White aluminium Cable entrances: 1 with neoprene rubber membrane gland (TET 7-10) Hole size equals M20 1 with M20 gland For 6-13 mm cable Capacity (no. of connectors): 6 FC, ST, DIN 8 SC, E2000 12 LC (when splicing) 16 LC (with direct termination) Dimensions: 110 x 150 x 35 mm (W x H x D) Weight: 0.5 kg Article numbers 400610 Wall-mount box, mini w/spliceholder 400611 Adapter plate, mini, 6 holes ST/FC 400613 Adapter plate, mini, 4 holes SC DPX/LC Quad 400617 Adapter plate, mini, 6 holes SC SPX/LC DPX 400619 Adapter plate, mini, 4 holes E2000 compact, DPX 400612 Closed front, mini 400615 Brackets, mini, kit 400616 Clips, DIN profile, kit
Wall-mount box midi PRO DATA SHEET DB4125-E Issue C Page 1 of 1 For indoor use. For termination of optical connectors. Prepared for splicing of pigtails. Integrated assembly board Adapter plates exists for most connector types. Description An indoor wall-mount box for efficient termination of cables. Incoming cable may be directly terminated using field connectors (e.g. FAST, UniCam, LightCrimp Plus) or by splicing pigtails. An adapter plate must be ordered separately - depending on wanted connector type. The box is delivered with a perforated assembly board for easy attachment of splice holders and fibre guides. Installation-set with these items may be ordered separately. The box has 2 round cable entrances and glands for both are included. Specifications Material: White aluminium Cable entrances: 1 with neoprene rubber membrane gland (TET 7-10) Hole size equals M20 1 with M20 gland For 6-13 mm cable Capacity (no. of connectors): 24 SC duplex, LC duplex 1, FC, ST, DIN, E2000 48* LC quad 2 Dimensions: 280 x 242 x 68 mm (W x H x D) Weight: 0.9 kg Article numbers 400650 Wall-mount box, midi PRO 400651 Adapter plate midi PRO, 24 holes ST/FC 400652 Closed front, midi PRO 400653 Adapter plate midi PRO, 12 holes SC DPX/LC QUAD 400657 Adapter plate midi PRO, 12 holes SC SPX/LC DPX 400659 Adapter plate midi PRO, 12 holes E2000 compact, DPX 400400 Installation-set, wall-mount box MP346 Splice holder, 12 splices, black In addition to 400400 when over 24 splices * When using 48 splices, 2 pcs. of MP346 splice holder must be ordered in addition to the installation set 400400. 1) LC duplex uses 400657, the adapter plate numbering will then be 1-12 (as for SC simplex) 2) LC quad uses 400653, the adapter plate numbering will then be 1-24 (as for SC duplex)
Wall cabinet FOSS24 DATA SHEET DB4126-E Issue C Page 1 of 1 For indoor use. With lock. For splicing of cables. For termination of optical connectors. Prepared for splicing of pigtails. Integrated assembly board Adapter plates exists for most connector types. Description An indoor wall cabinet termination or splicing of optical cables. Incoming cable may be directly terminated using field connectors (e.g. FAST, UniCam, LightCrimp Plus) or by splicing pigtails. An adapter plate must be ordered separately - depending on wanted connector type. The cabinet is delivered with a perforated assembly board for easy attachment of splice holders and fibre guides. Installation-set with these items may be ordered separately. The cabinet has 9 round cable entrances, a PG16 gland is included, the rest of the entrances are blinded. Different types of PG-glands for cable and multi-glands for several patch cords may be delivered for the entrances. The cabinet may also be used for splicing one or more cables to each other. Specifications Material: White aluminium Cable entrances: 8 - size PG 16 1 - size PG 29 Capacity (no. of connectors): 24 SC, FC, ST, DIN, E2000 48* LC Dimensions: 280 x 300 x 75 mm (W x H x D) Weight: 2 kg Article numbers 400940 Wall cabinet, FOSS24, w/lock 400941 Adapter plate, FOSS24, 24 holes ST/FC 400942 Adapter plate, FOSS24, 12 holes SC DPX/LC QUAD 400949 Adapter plate, FOSS24, 12 holes E2000 compact, DPX 400400 Installation set, wall-mount box 500255 Cable gland, PG16 500256 Cable gland, PG16, 5x3 mm C28485-000 Cable gland, PG29, 8x5.5 mm, 10 pkn. 350690-000 Cable gland, PG29, 24x3 mm 500257 Hole plug, PG16 500258 Hole plug, PG29 MP346 Splice holder, 12 splices, black In addition to 400400 when over 24 splices * When using 48 splices, 2 pcs. of MP346 splice holder must be ordered in addition to the installation set 400400.
Installation set - Wall box DATA SHEET DB4127-E Issue B Page 1 of 1 Adapted to FOSS wall-mount boxes and cabinet. For efficient splicing of pigtails and storing of fibre. Description Installation set for simple and efficient termination and splicing in FOSS wall-mount boxes and cabinet. Contains splice holders, fibre clips and strain relief for fibre tubes as needed for the installation. Content MP346 Splice holder, 12 splices, black 2 SR-4050B Split lock, splice holder, black 2 27075213 Fibre clip, large 8 SXA1135239 Holder, strain relief 1 SXA1135218 strain relief, rubber 3 SXA1135217 strain relief, steel 3 Article number 400400 Installation set, wall-mount box
Patch panel - DIN, FOSS DATA SHEET DB4157-E Issue A Page 1 of 4 DIN-rail mount or directly on wall. Simple access inside panel. May be extended with add-on units. Each unit may handle up to 24 connectors. Adapters for ST, SC and LC may be delivered. Description A flexible panel suited for DIN-rail mounting. The panel is modular and may be delivered in variable sizes. The base unit has room for up to 24 LC-connectors or 12 SC or ST-connectors. The add-on unit has room for the same amount of connectors. The extending with an extra unit is done by removing the lid from the base unit and attach the add-on unit instead. The lid is then put on the add-on unit. In this way we may deliver panels with 48, 72, 96 or more connectors by increasing the total with of the panel. The base unit also has a mounting board for attaching components. This may be taken out of the panel to simplify assembly. The unit has two round cable entrances in the bottom. 1 PG cable gland is included for one of the entrances, the other entrance is covered with a membrane gland. There is an opening between the units to enable the fibre form the cable to be distributed between the units. DIN-panel, open with mounting board taken out Both the units and the lid is hinged at the top to make it easy to work inside all units without taking everything apart. This also helps avoiding damage to the fibre because the units are opened and closed in a controlled way. The hinges are snap-locks, this enables the units to be fully disconnected without the use of any tools. The adapter plate may also be removed by loosening similar snap-locks. Incoming cable may be directly terminated using field connectors (e.g. FAST, UniCam, LightCrimp Plus) or by splicing pigtails. Adapters, DIN-Rail clips and splice holder are included. The panel may be delivered with pigtails or pre-terminated cable type AXAI, QXXI or Micro-cable. AXAI have tight buffer and up to 24 fibre, a panel with 48 fibre will therefore be delivered with 2 cables. Double DIN-panel, open for work. The panel may also be delivered with CWDM multiplexer and de-multiplexer. Two panels (one at each end of the link) will then make a complete system with necessary components for duplex communication. All connectors (both in and out) are at the front. The units separated.
DATA SHEET DB4157-E Issue A Page 2 of 4 The DIN-rail clip is mounted in the back, on the short side. By using a bracket (not included) the panel may be mounted with the long-side towards the wall - either by using the DIN-clip or by screwing it directly to the wall. Specifications Material: Aluminium White paint, RAL9010 Cable entrances: 2 stk. 1 gland is included (PG16) Mounting options: DIN-rail in the back, DIN-rail on the side, screw on wall (side) Side mount requires "Wall bracket" - see accessories. Capacity per unit: 24 (LC), 12 (SC, ST) Dimensions per unit: 57 x 180 x 160 mm (B x H x D) Included adapters and DIN-rail clip 77 x 180 x 153 mm (B x H x D) When using "Wall bracket" Weight per unit: 0.5 kg Article numbers With adapters multimode FPD76/xxST-A Panel, DIN, xx ST, adapter, OM1/2 1) FPD76/xxSC-A Panel, DIN, xx SC, adapter, OM1/2 1) FPD76/xxSCT-A Panel, DIN, xx SC, adapter, OM3/4 1) FPD76/xxLC-A Panel, DIN, xx LC, adapter, OM1/2 2) FPD76/xxLCT-A Panel, DIN, xx LC, adapter, OM3/4 2) With adapters single mode FPD76/xxSSC-A Panel, DIN, xx SC/PC, adapter, SM 1) FPD76/xxAPC8-A Panel, DIN, xx SC/APC, adapter, SM 1) FPD76/xxSLC-A Panel, DIN, xx LC/PC, adapter, SM 2) FPD76/xxLCA-A Panel, DIN, xx LC/APC, adapter, SM 2) With adapters and pigtails multimode FPD76/xxSCOM1 Panel, DIN, xx SC, pigtails, 62/OM1 1) FPD76/xxLCOM1 Panel, DIN, xx LC, pigtails, 62/OM1 2) FPD76/xxSCOM2 Panel, DIN, xx SC, pigtails, 50/OM2 1) FPD76/xxLCOM2 Panel, DIN, xx LC, pigtails, 50/OM2 2) FPD76/xxSCOM3 Panel, DIN, xx SC, pigtails, 50/OM3 1) FPD76/xxLCOM3 Panel, DIN, xx LC, pigtails, 50/OM3 2) xx = number of connectors: 4, 8, 12, 24, 48, etc. 1) For every 12 connectors the with of the panel is increased by adding one unit. 2) For every 24 connectors the with of the panel is increased by adding one unit.
DATA SHEET DB4157-E Issue A Page 3 of 4 With adapters and pigtails single mode FPD76/xxSSC Panel, DIN, xx SC/PC, adapter, SM 1) FPD76/xxAPC8 Panel, DIN, xx SC/APC, adapter, SM 1) FPD76/xxSLC Panel, DIN, xx LC/PC, adapter, SM 2) FPD76/xxSLCA Panel, DIN, xx LC/APC, adapter, SM 2) Pre-terminated single mode AXAI FPD76/xxSSC-yyy Panel, DIN, xx SC/PC, 9/OS2, AXAI, yyy m 1) FPD76/xxAPC8-yyy Panel, DIN, xx SC/APC, 9/OS2, AXAI, yyy m 1) FPD76/xxSLC-yyy Panel, DIN, xx LC/PC, 9/OS2, AXAI, yyy m 2) FPD76/xxSLCA-yyy Panel, DIN, xx LC/APC, 9/OS2, AXAI, yyy m 2) Pre-terminated single mode QXXI FPD76Q/xxSSC-yyy Panel, DIN, xx SC/PC, 9/OS2, QXXI, yyy m 1) FPD76Q/xxAPC8-yyy Panel, DIN, xx SC/APC, 9/OS2, QXXI, yyy m 1) FPD76Q/xxSLC-yyy Panel, DIN, xx LC/PC, 9/OS2, QXXI, yyy m 2) FPD76Q/xxSLCA-yyy Panel, DIN, xx LC/APC, 9/OS2, QXXI, yyy m 2) Pre-terminated single mode Micro-cable FPD76R/xxSSC-yyy Panel, DIN, xx SC/PC, 9/OS2, Micro-cable, yyy m 1) FPD76R/xxAPC8-yyy Panel, DIN, xx SC/APC, 9/OS2, Micro-cable, yyy m 1) FPD76R/xxSLC-yyy Panel, DIN, xx LC/PC, 9/OS2, Micro-cable, yyy m 2) FPD76R/xxSLCA-yyy Panel, DIN, xx LC/APC, 9/OS2, Micro-cable, yyy m 2) Pre-terminated multimode AXAI FPD76/xxSCOM1-yyy Panel, DIN, xx SC, 62/OM1, AXAI, yyy m 1) FPD76/xxLCOM1-yyy Panel, DIN, xx LC, 62/OM1, AXAI, yyy m 2) FPD76/xxSCOM2-yyy Panel, DIN, xx SC, 50/OM2, AXAI, yyy m 1) FPD76/xxLCOM2-yyy Panel, DIN, xx LC, 50/OM2, AXAI, yyy m 2) FPD76/xxSCOM3-yyy Panel, DIN, xx SC, 50/OM3, AXAI, yyy m 1) FPD76/xxLCOM3-yyy Panel, DIN, xx LC, 50/OM3, AXAI, yyy m 2) xx = number of connectors: yyy defines length: 4, 8, 12, 24, 48, etc. 010 = 10 m, 015 = 15 m, 100 = 100 m etc. 1) For every 12 connectors the with of the panel is increased by adding one unit. 2) For every 24 connectors the with of the panel is increased by adding one unit. CWDM FPD76/4LCWDM-Sxxx Panel, DIN, 4 channel CWDM, 1271-1331 FPD76/4CWDM-Sxxx Panel, DIN, 4 channel CWDM, SM, 1511-1571 FPD76/4/1CWDM-Sxxx Panel, DIN, 4+1 channel CWDM, SM, 1511-1571 FPD76/8CWDM-Sxxx Panel, DIN, 8 channel CWDM, 1271-1451 FPD76/8/1CWDM-Sxxx Panel, DIN, 8+1 channel CWDM, 1471-1611 + 1310 FPD76/18CWDM-Sxxx Panel, DIN, 18 channel CWDM, 1271-1611 3) xxx = connector type: LC = LC/PC, LCA = LC/APC 3) 18CWDM requires that the with of the panel is increased by adding one unit.
DATA SHEET DB4157-E Issue A Page 4 of 4 Accessories FPD76200 Wall bracket, DIN panel FPD76300 Cover, DIN-panel 1262410 DIN rail, 2 m Gallery FPD76200, Wall bracket, DIN panel FPD76300, Cover, DIN-panel Double DIN-panel with cover DIN-panel with cover Double DIN-panel with cable Lid and add-on unit may be taken off by opening the snap-locks in the hinges and push to the side DIN-clip, standard placing in the back DIN-clip, placed on the wall bracket DIN-panel with wall bracket for mounting directly on the wall
Patch panel - DIN DATA SHEET DB4145-E Issue B Page 1 of 3 Compact size. Rugged metal construction. Simple DIN-Rail mount. Prepared for splicing of pigtails (splice holder included). Slide-hinged faceplate aids field termination. Adapters for ST, SC and LC may be delivered. Description A rugged and compact panel for DIN-Rail mount. The panel comes with DIN-Rail attachment in the rear, but it may also be placed on the side. There are 2 sizes: SN1 and SN2, both have 2 cable entries (1 at the top and 1 at the bottom), 1 PG cable gland is included. The unit features a sliding faceplate with capture mechanism to allow easy access when working in the panel. Incoming cable may be directly terminated using field connectors (e.g. FAST, UniCam, LightCrimp Plus) or by splicing pigtails. Adapters, DIN- Rail mount and splice holder are included. The panel may be delivered with adapters and pre-terminated cable type AXAI and/or Micro-cable (48 fibre). AXAI have tight buffer and up to 24 fibre, a panel with 48 fibre will therefore be delivered with 2 cables. The panel may also be delivered with CWDM multiplexer and de-multiplexer. Two panels will then make a complete system with necessary components for duplex communication. All connectors (both in and out) are at the front. Specifications Material: Steel Blue Cable entrances: 2 (1 cable gland, PG 13.5 is included) Max cable diameter: 12 mm Mounting options: Rear DIN-Rail, side DIN-Rail. SN1: Capacity (no. of connectors): 12 (LC, SC, ST) Dimensions: 70 x 102 x 131 mm (W x H x D) Included adapters and DIN-Rail mount Weight: 0.7 kg SN2: Capacity (no. of connectors): 48 (LC), 24 (SC, ST) Using pre-terminated cable 24 (LC, SC, ST) When splicing Dimensions: 89 x 140 x 146 mm (W x H x D) Included adapters and DIN-Rail mount Weight: 1.1 kg
DATA SHEET DB4145-E Issue B Page 2 of 3 Article numbers With adapter multi mode SNy-xxST-A Panel, DIN, xx ST, adapter, OM1/2 Beige adapter SNy-xxSC-A Panel, DIN, xx SC, adapter, OM1/2 Beige adapter SNy-xxSCT-A Panel, DIN, xx SC, adapter, OM3/4 Turquois adapter SNy-xxLC-A Panel, DIN, xx LC, adapter, OM1/2 Beige adapter SNy-xxLCT-A Panel, DIN, xx LC, adapter, OM3/4 Turquois adapter With adapter single mode SNy-xxSSC-A Panel, DIN, xx SC/PC, adapter, SM Blue adapter SNy-xxAPC8-A Panel, DIN, xx SC/APC, adapter, SM Green adapter SNy-xxSLC-A Panel, DIN, xx LC/PC, adapter, SM Blue adapter SNy-xxSLCA-A Panel, DIN, xx LC/APC, adapter, SM Green adapter y = type of panel: 1 = small panel, 2 = large panel. xx = number of connectors: For SN1 xx may be 4, 8 or 12 For SN2 xx may be 4, 8, 12 or 24 Pre-terminated single mode SNy-xxSSC-000 SNy-xxAPC8-000 SNy-xxSLC-000 SNy-xxSLCA-000 Panel, DIN, xx SC/PC, 9/OS2, AXAI, 0 m Panel, DIN, xx SC/APC, 9/OS2, AXAI, 0 m Panel, DIN, xx LC/PC, 9/OS2, AXAI, 0 m Panel, DIN, xx LC/APC, 9/OS2, AXAI, 0 m y = type of panel: 1 = small panel, 2 = large panel. xx = number of connectors: For SN1 xx may be 4, 8 or 12 For SN2 xx may be 4, 8, 12 or 24 (for LC it may also be 48) CWDM SN2-4CWDM-SLC SN2-4/1CWDM-SLC SN2-8CWDM-SLC SN2-8/1CWDM-SLC Panel, DIN, 4 channel CWDM, SM, 1510-1570, LC/PC Panel, DIN, 4+1 channel CWDM, SM, 1510-1570, LC/PC Panel, DIN, 8 channel CWDM, SM, 1510-1570, LC/PC Panel, DIN, 8+1 channel CWDM, SM, 1510-1570, LC/PC Accessories 1262410 DIN rail, 2 m
DATA SHEET DB4145-E Issue B Page 3 of 3 Gallery SN1 with adapters for 8 SC/PC SM connectors SN2 med adapters for 24 SC/PC SM connectors SN1 - rear side with DIN-Rail mount SN2 with 24 LC/PC and pre-terminated AXAI Open SN2 with pre-terminated cable SN2 with 8+1 CWDM
Wall-mount box FTH indoors DATA SHEET DB4150-E Issue B Page 1 of 2 Wall-mount box for up to 4 SC/PC or SC/APC connectors. Adapters with automatic shutters. Capacity for splicing up to 4 pigtails. Simple instalment of pre-terminated subscriber cable. 60 mm screw holes for mounting on an in-wall box (hidden cabling). Bracket for mounting on wall and DIN-rail. 83x100x27 mm (HxWxD) Description The wall-mount box is suited for use in the home for terminating incoming subscriber cable in an SC/PC or SC/APC interface. The connection may be done by splicing the subscriber cable in the box. An option is also to install a pre-terminated subscriber cable directly in the box, or you may buy a pre-terminated wall-mount box with a defined cable length. The wall-mount box is normally mounted close to the home central. Connection to this is done using a subscriber patch cord. When running cable in a house the cable may be exposed to more severe bends than are normal in other parts of the network. This requires a fibre that is more insensitive to these types of effects. The subscriber patch cord/cable contains fibre according to ITU-T G.657.A2. Pigtails contain fibre according to ITU-T G.657.A1. Specifications Number of cable entrances: 2 bottom, 1 top, 1 left, 1 right, 1 rear Largest cable diameter: 6 mm Capacity connectors: 4 SC/PC or SC/APC With shutter Capacity splices: 4 45 mm splice protector Operating temperature: -20 o C til +50 o C Dimensions: 83x100x27 mm (HxWxD) Colour: White RAL9016 Subscriber cable: 1, 2 or 4 fibre 4.5 mm white without marking Fibre type subscriber cable: Bend insensitive fibre according to ITU-T G.657.A2 Fibre type pigtails: Bend insensitive fibre according to ITU-T G.657.A1
DATA SHEET DB4150-E Issue B Page 2 of 2 Article number Wall-mount box and adapters XCPSC01135 XPPSC00335 XPPSC00336 Wall-mount box, FTH, 4 holes SC Adapter, SC SPX w/shutter, blue, 10 pcs Adapter, SC/APC w/shutter, green, 10 pcs Pre-terminated wall-mount box with 1 fibre XCPS01135/1SSC-xxx Wall-mount box, 1xSC/PC, 9/OS2/4500, xx.x m white XCPS01135/1SSCA-xxx Wall-mount box, 1xSC/APC, 9/OS2/4500, xx.x m white Pre-terminated wall-mount box with 2 fibres XCPS01135/2SSC-xxx Wall-mount box, 2xSC/PC, 9/OS2/4500, xx.x m white XCPS01135/2SSCA-xxx Wall-mount box, 2xSC/APC, 9/OS2/4500, xx.x m white Wall-mount box may also be delivered with 4 fibres. Contact us for more information. Gallery Wall-mount box connected to home central and out-going subscriber cable Adapters with shutter Wall-mount box with 2 SC/APC pigtails Pre-terminated wall-mount box with 1-fiber subscriber cable and SC/APC connector Wall-mount box with 1 SC/APC connector mounted on the wall Pre-terminated wall-mount box with subscriber cable
Cabinet 500700 DATA SHEET DB4155-E Issue A Page 1 of 2 For use in hazardous environment. For splicing cables. For terminated cable. Prepared for splicing of pigtails. Adapter bracket for ST connector (others available). Description A wall cabinet for hazardous environment specially adapted for termination or splicing of fibre optical cables. Incoming cable may be directly terminated using field connectors (e.g. FAST, UniCam, LightCrimp Plus) or by splicing pigtails. The cabinet may also be used for splicing one or more cables to each other. Adapter brackets for ST connectors are included. Brackets for LC or SC adapters may be ordered separately. The cabinet is also delivered with splice holders for 12 splices and fibre guides installed. Extra splice holders may be ordered if more than 12 splices is needed. These are then stacked on top of the first one. The cabinet may be ordered with cut outs for Ex-glands. Different types of Ex-glands may be ordered separately. Specifications Type of protection: EEx e II T6 (T amb 40 C) EEx e II T4 (T amb 90 C) EEx ed IIC T4/T5/T6 (T amb 40 C) IP66 / IP67 Protection: Material: AISI 316L / EN 1.4404 Finish: Electro polished Grounding: Inside on busbar or terminals. External earth bolt on fixing bracket Weight: Approx. 7,5 kg. (empty box) Gasket: EPDM / Silicone Dimensions (inside) 280 x 318 x 150 mm (HxWxD) Dimensions (outside) 326 x 374 x 160 mm (HxWxD) Only appropriate ATEX certified glands and blanks must be used. These components must at least have a degree of protection IP6x. Included: 1 Splice holder for 12 splices. 2 Fibre cross w/fibre guides 2 Fibre clips w/tape 2 Adapter brackets for up to 16 ST adapters (8 each) 2 Strain relief brackets for FRP elements
DATA SHEET DB4155-E Issue A Page 2 of 2 Article number 500700 Cabinet IP66/67 Exe 326x374x160mm w/installation set Accessories 1253270 Cable Gland, brass, ICG-653, 5.5-12 mm, M20 1253272 Cable Gland, brass, ICG-653, 12-21 mm, M20 1253440 Cable Gland, brass, 501/421, 3-8mm, M20 1253441 Cable Gland, brass, 501/421, 7.5-11.9, M20 1253443 Cable Gland, brass, 501/421, 8.5-13.4 M20 1253444 Cable Gland, brass, 501/421, 13.0-20.2 mm, M25 1253445 Cable Gland, brass, 501/421, 9.5-15.4 mm, M25 1253539 Cable Gland, brass, 501/453, 5.5-12 mm, M20 1253540 Cable Gland, brass, 501/453, 9.5-16 mm, M20 1253470 Breather drain, M20 EExe, brass 1253472 Breather drain, M25 EExe, brass 1253332 Blind plug, M20, EExde, brass 1253333 Blind plug, M25, EExde, brass 1253121 Locknut, brass, M20 1253122 Locknut, brass, M25 500620 Adapter bracket, BUDI-1S, 2x8 SC SPX 500630 Adapter bracket, BUDI-S/M, 6x8 SC SPX MP346 Splice holder, 12 splices, black
Racetrack OPGW, 1120 mm DATASHEET DB4129-E Issue C Page 1 of 2 For storing OPGW when splicing and branching. In coated aluminium. For use with steel mast. Plate for attaching Tykoflex OPGW and FOSC-OPGW joint closures. Cable clamps in aluminium adapted to different cable diameters Description The racetrack is produced in coated aluminium and consists of a cross for storing OPGW cable and a mounting plate for attaching the joint closure and securing the OPGW-cable. The mounting plate may be placed on either right or left side. The racetrack has 2 set of brackets for the OPGW- and the branching-cable respectively. The racetrack may be mounted directly on steel masts using four 10 mm J-bolts type 10-4135-00. On some steel masts it may be difficult to mount the racetrack directly. In those cases a tower attachment bracket (402920/1) may be used. This adapter is mounted to the mast using two 16 mm J-bolts type 10-4145-00 (10 mm J-opening). The racetrack is then mounted to this adapter using four 10 mm J-bolts type 10-4135- 00 (18 mm J-opening). For single phase tower two galvanised steel tower attachment brackets may be used. These are mounted to the mast with four 16 mm J-bolts and the racetrack is mounted to the brackets with four 10 mm J-bolts. These may be delivered as a complete kit (402920/2K) - see accessories. When using Tykoflex joint closure the OPGW-cable is secured on the plate with cable clamps - see accessories. The FOSC-OPGW joint closure do not use the cable clamps - the cable is secured in the closure. J-bolts, cable clamps and tower attachments must be ordered separately. Specification Material: Aluminium painted Dimensions: 1410 x 980 x 151 mm W x H x D Diameter of coil: 1120 mm / 812 mm Ø OPGW / Ø branching cable Room in track: 110 x 107 mm Equals ca. 12 rounds with 27 mm cable dia. Weight: 9 kg Article numbers 402920 Racetrack OPGW, 1120 mm
DATASHEET DB4129-E Issue C Page 2 of 2 Accessories 402920/2K - Tower attachment, single phase tower, UNP80x1060 402920/1 - Tower attachment, UNP80, galvanized 10-4135-00 - J-bolt, M10x140 mm, complete 10-4145-00 - J-bolt, M16x200 mm, complete 402915/xx - Cable clamp, OPGW, xx mm, 4 pcs. Alu* *xx = cable diameter in mm: 10, 12, 13, 135 = 13,5 mm, 14, 15, 17, 18, 19, 20, 21, 22, 23, 26, 27 Other sizes may be provided on request. Select the largest cable clamp that is less than the outer diameter of the cable. The cable clamp is only used with the OPGW closure from Tykoflex. Gallery Racetrack with Tykoflex OPGW closure, mounted using tower attachment 402920/1 Racetrack with FOSC-OPGW closure Racetrack mounted using mast mount and J-bolts 402920/2K