YOUR OPTICAL FIBER EQUIPMENT PROVIDER CATALOGUE Dome Type M Series FIBER OPTIC SPLICE CLOSURES TUV Austria Certificate Registration Number: 20100102004908
fybera Dome Type, M series, Fiber Optic Splice Closures Features: - Polypropylene Dome and Basis - Basis sealing type: Heatshrink - Protection level: IP68 - Resistance to vibrations - Resistance to temperature fluctuations - UV resistant - Easy to re-enter without tools - Rugged construction for long term reliability - Operating temperatures: -40 C to +75 C Applications: - Wall/Pole Mount - Aerial-hanger - Straight - Branch - Direct buried - Underground (shaft) - FTTx 1
Types of Basis Basis model: MB-A - Number of round ports per unit: 4 (up to Ø18mm cable* per port) - Number of oval ports per unit: 1 (up to 2xØ20mm cables) - Double Sided splice tray holder: up to 6 Splice Trays - Supports storage basket (not included in standard configuration) - Supports 24 ODF Crate (not included in standard configuration) *Round ports can be divided for usage with up to 4 cables. See page 8 Note: If storage basket or 24 ODF Crate is installed, the holder will be capable of supporting up to 4 splice trays. Basis model: MB-B - Number of round ports per unit: 8 (up to Ø12mm cable per port) - Number of oval ports per unit: 1 (up to 2xØ20mm cables) - Single Sided splice tray holder: up to 4 Splice Trays - Supports 24 ODF Crate (not included in standard configuration) 2
Basis model: MB-C - Number of round ports per unit: 4 (up to Ø18mm cable* per port) - Number of oval ports per unit: 1 (up to 2xØ20mm cables) - Single Sided splice tray holder: up to 6 Splice Trays *Round ports can be divided for usage with up to 4 cables. See page 8 Mechanical Sealing Clamp - Easy to open and close, without the need of splecial tools - Evenly seals (Air/Water) the whole Basis and Dome - Allows easy re-entering - Comes with warning label for laser radiation - Universal size, fits all M-Series fiber optic splice closures - Pre-installed on every dispatched 3
Types of Splice Trays Splice Tray MS-A & MS-B - Up to 24 splices - 1 pre-installed transperant cover - 6 pre-installed splice protective holders - ABS material MS-A Each splice protective sleeve holder is designed for up to 4 splices. Total of 6 holders per splice tray in both types MS-B Preferably each tray can hold up to 8 cable tubes If nescessary more can be installed Various combinations of Bare Type splitters may be installed. More information about splitters, check out at 4
Two Domes available. Difference is in the height of the Dome. Each Dome and Basis is produced of Polypropylene(PP) and comes with great aging, strenght and corosion capabilities. Due to the natural characteristics of PP additional compounds are added in production process in order to imporve UV resistance. Dome, Type MD-A & MD-B - Made of high quality PP (Polypropylene) - Vibrant resitant - UV resistant - Long life span MD-A MD-B 5
Fiber Optic Splice Closures ARC 4S-48 ARC 8S-48-1 Oval Port 4 Round Ports Mechanical Sealing Clamp Number of Splice Trays: 2 Capacity: 48 splices Standard Configuration - 1 Oval Port 8 Round Ports Mechanical Sealing Clamp Number of Splice Trays: 2 Capacity: 48 splices Standard Configuration ARC 4B-144-1 Oval Port 4 Round Ports Mechanical Sealing Clamp Number of Splice Trays: 6 Capacity: 144 splices Standard Configuration Fiber Optic Splice Closures included in M Series Component Type Model ARC 4S ARC 8S ARC 4B ARC 4B1 ARC 8B Basis MB-A MB-B MB-C MB-A MB-B Splice Tray MS-B MS-B MS-A MS-A MS-A Dome MD-A MD-A MD-B MD-B MD-B Max Splice Capacity 144 96 144 144 96 Size (mm) Ø185x422 Accessories (6 Splice Trays) (4 Splice Trays) Ø185x412 (6 Splice Trays) Ø185x532 (6 Splice Trays) Ø185x532 Ø185x522 Standard Configuration* *For more information about Standard Configuration see page 8 Note: When ordering, please specify number of splice trays (4 Splice Trays) 6
Technical Schematics ARC 8S-48 ARC 4S-48 ARC 4B-144 412mm 422mm 532mm Ø136mm Ø185mm Ø136mm Ø185mm Ø136mm Ø185mm - Mechanical Sealing Clamp - Round port suitable for cables with diameter up to Ø18mm - Oval port suitable for 2 cables with diameter up to Ø20mm each - Mechanical Sealing Clamp - Round port suitable for cables with diameter up to Ø12mm - Oval port suitable for 2 cables with diameter up to Ø20mm each 7
Accessories included as Standard Configuration - Aluminium cable tape - Protection sleeves -Abrasive strip - Cleaning agent - Heat shrinkable tubes for all ports - Cable ties - Branch clips Size S Optional Premium accessories 4x Filler Clips Exceptional Storage Basket Design - Hotmelt sealing element - Divides round port of a allowing usage of up to 4 fiber optic cable swith diameter up to Ø7mm each - Usable only with MB-A and MB-B Basis or other round ports with similar sizes - Waterproof port when sealed with this hotmelt element *For more information and videos, check out our website M-series 24 ODF Crate - Up to 24x SC simplex or 24 LC duplex (SC Footprint) fiber optic adapters - Suitable for MB-A and MB-B Basis - Available in Black or Yellow color Pole Mounting Kit - Allows Aerial installation of the selected Fiber Optic Splice Closure - Fits both MD-A and MD-B Domes 8