Pushbutton and selector switch series Quality touch!

Pushbutton and selector switch series Quality touch! For Info: sales@switchesunlimited.com www.switchesunlimited.com Phone: 00-1-07 Fax: 71-7-70

Pushbuttons and selector switches Ømm Quality touch! mm LOW ACTUATOR PROFILE The external actuator bezel has a low profile and reduced front thickness. HIGH DEGREE OF PROTECTION The actuators have been tested to guarantee a degree of protetection per IEC/EN IP, IP7, IP9K and UL Type X, appropriate for use even in extreme ambient conditions. QUICK AND EASY ACTUATOR INSTALLATION CUSTOMISING CAPABILITY To simplify stock management, the series includes actuators without cap or lens and separate caps and lenses for quick installation or replacement on spring return and push-push types; all these are sold as accessories. Click! Click! - Actuator fixing on the mounting surface, is obtained using its threaded ring, easily rotated by hand or by socket spanner/wrench. - There is an anti-rotation fastener which collapses inside the gasket to allow fitting also when drillings are round without reference index. - The sealing gasket for the actuator mounting surface has a gripping action (suction effect) offering additional adhesion properties. - The mounting adapter and actuators each have clearly visible reference indications making the snap-on fitting between the two easy and intuitive. - Electrical contact and LED elements are snapped onto the mounting adapter. - The activation of the middle contacts is standard supplied on all non-illuminated spring return and push-push button or selector switch actuators. For Info: sales@switchesunlimited.com www.switchesunlimited.com Phone: 00-1-07 Fax: 71-7-70

HIGH DEGREE OF PROTECTION ELEGANT STYLE AND ERGOMIC DESIGN LONG ACTUATOR MECHANICAL LIFE MATERIALS RESISTANT TO OILS, SOLVENTS AND HYDROCARBONS +70 - USAGE AT EXTREME TEMPERATURE CONDITIONS INTERNATIONAL CERTIFICATIONS CONTACT ELEMENTS REDUCED DIMENSIONS AND INTERAXIS 0 0 mm mm 0 0 Ø. - Miniaturised size - High electric conductivity - V 1mA - Up to 9 contact elements can be installed, rows of elements - Available versions: Front and base mount with screw terminals while front-mount only with faston and spring-clamp terminals - Contact operation with double breaking action, direct (positive) opening action and wiping effect. Minimum pitch between drillings: - 0x0mm for two single actuators on a mounting surface - 0xmm for double and triple-touch actuators or when spring clamp contacts are used. - Total depth, from the external mounting surface to the end of the first contact element is just mm. - Low actuator profile The external actuator bezel has a low profile and reduced front thickness. For Info: sales@switchesunlimited.com www.switchesunlimited.com Phone: 00-1-07 Fax: 71-7-70

Pushbuttons, spring return FLUSH LPC B _ EXTENDED LPC B0 _ SHROUDED LPC B0 _ Pushbuttons, spring return, with symbol TE: Other different symbols are available also for illuminated types. LPC B11 O 0 0 1 I 1 II LPC B11 STOP LPC B11 FLUSH EXTENDED LPC B1 0 O 0 START R 7 7 RESET 9 STOP Illuminated buttons, spring return Mechanical reset buttons, spring return FLUSH LPC BL_ EXTENDED LPC BL0_ FLUSH LPC R0_ FLUSH WITH SYMBOL RESET LPC R119 Push-push buttons FLUSH LPC Q _ EXTENDED LPC Q0 _ EXTENDED TE: Contact elements can be mounted. LPC R00 Illuminated push-push buttons Pilot light heads FLUSH LPC QL_ EXTENDED LPC QL0_ LPL_ 11 (symbol indicating dangerous voltage) Contact elements Mounting adapter LPX E LPX C _ LPX CS LPX CF LPX AU... MOUNTING: TERMINATION: Screw MOUNTING ADAPTER: With Screw Without EM LB....7... A Early make D Late break Spring Without... Faston Without... Mounting adapter for contact and LED elements with actuators. Allows mounting also on control station cover. For Info: sales@switchesunlimited.com www.switchesunlimited.com Phone: 00-1-07 Fax: 71-7-70

Mushroom head buttons FOR EMERGEY STOPPING ISO COMPLIANT. Ø0mm. Turn to release. LPC B Ø0mm. Turn to release. LPC B FOR RMAL STOPPING. Ø0mm. Turn to release. LPC B _ Auto-monitor Screw termination. Without mounting adapter. Auto-monitor contact elements for non-illuminated latch mushroom-head pushbuttons. Ø0mm. Pull to release. LPC B7 Ø0mm. Pull to release. LPC B7 LPX CSM 1... Version with Ronis keys Types available with different key codes; add R suffix to order code and complete with numeric code from the following: 1E, A, 0E, 11A or E. Ø0mm. Turn key to release. LPC B Ø0mm. Turn key to release. LPC B LPX C0SM.... Mushroom head buttons, spring return Ø0mm LPC B1 _ Ø0mm LPC B1 _ Illuminated mushroom head buttons Ø0mm. Turn to release. For emergency stopping, ISO compliant. LPC BL Ø0mm. Turn to release. For normal stopping. LPC BL1 _ Illuminated mushroom head buttons, spring return Ø0mm LPC BL1 _ Control stations with one actuator Grey cover Yellow cover LPZ P1 B LPC B7) LPZ P1 B 0 LPC B) LPZ P1 B 0 LPC B) LPZ P1 B 0 LPC B) Control stations without actuators LPZ P _ 1A Contact and LED elements Screw termination. Direct snap-in mounting on LPZ control station base. CONTACT ELEMENTS LPX CB LPX CB.. Without fixing base. for 1 actuator 1A for 1 actuator A for actuators A for actuators LPZ P _ A for actuators A for actuators A for actuators LED ELEMENTS, STEADY LIGHT LPX LPB 1-0VAC/DC B -VAC E 1-VAC M Total protection against overvoltages and stray currents in wiring, to reduce flickering phenomenon and withstand vibrations LED elements LPX LF LPX LP LPX LPS LPX LE 1-0VAC/DC B -VAC E 1-VAC M 1-0VAC/DC B -VAC E 1-VAC M 1-0VAC/DC B -VAC E 1-VAC M 1-0VAC/DC B -VAC/DC E 1-VAC/DC M MOUNTING: TERMINATION: Screw Screw Spring LIGHT: Flashing Steady Steady PROTECTION: Against overvoltages and stray currents in wiring, to reduce flickering phenomenon and withstand vibrations Screw Steady Against overvoltages and to withstand vibrations For Info: sales@switchesunlimited.com www.switchesunlimited.com Phone: 00-1-07 Fax: 71-7-70

Selector switches KB KEY position position LPC S1 LPC S1 0 0 1 1 position position LPC S LPC S 0 0 1 1 0 0 LEVER LPC S 0 70 0 90 position position LPC S LPC S 0 0 1 1 Version with Ronis keys Types available with different key codes; add R suffix to order code and complete with numeric code from the following: 1E, A, 0E, 11A or E. KB CAP position position LPC S LPC S 0 0 1 1 Type of positions and rotation angles Maintained position Spring return position Key extraction position position position 90 Illuminated selector switches POSITION KB LPC SL1 0 0 0 0 0 1 1 1 1 1 POSITION KB LPC SL1 0 0 0 0 0 1 1 1 1 1 LPC SL1 USB and RJ communication interfaces LPC D USB.0 A-A connection type USB 0.0 A-B connection type USB 0.0 B-A connection type RJ 0 Ethernet connection type (shielded) Double-touch buttons, spring return FLUSH 1 EXTENDED AND 1 FLUSH LPC B71 1 1 1 I - 0 START/STOP LPC B7 1 1 1 I - 0 START/STOP Triple-touch buttons, spring return EXTERNAL FLUSH AND 1 MIDDLE EXTENDED LPC B7 LPC B7 STOP STOP STOP STOP 7 Double-touch buttons, spring return, white indicator FLUSH 1 EXTENDED AND 1 FLUSH LPC BL71 1 LPC BL7 1 1 1 1 1 I - 0 I - 0 START/STOP START/STOP Monoblock potentiometer drives LPC PA _ 0 1 kω 00, kω 00 kω 0 kω 00 0 kω 0 0 kω 00 00 kω Joysticks (IP) WITHOUT MECHANICAL INTERLOCK LMT J _ LMT J _ 00 00 WITH MECHANICAL INTERLOCK IN CENTRE POSITION LMT J _ LMT J _ Instable positions 11 11 Stable positions Pulse and steady tone monoblock buzzers Supply voltage 9-1VAC/DC 1-0VAC/DC -VAC/DC 1-VAC/DC Supply voltage 9-1VAC/DC 1-0VAC/DC -VAC/DC 1-VAC/DC IP0 LPC ZSA LPC ZSB LPC ZSE LPC ZSM IP LPC ZSA IP LPC ZSB IP LPC ZSE IP LPC ZSM IP IP0: 90dB sound intensity at cm. IP: 0dB sound intensity at cm. LED integrated monoblock pilot lights, steady light LPTIL P 1VAC/DC A VAC B 1VAC E 0VAC M Quality touch! For Info: sales@switchesunlimited.com www.switchesunlimited.com Phone: 00-1-07 Fax: 71-7-70

Accessories LPX A LPX A170R LPX B0 LPX A17 Transparent diffuser for double-touch buttons LPX A Threaded plug for unused drilled holes (grey) LPX A Action plug for centre contact LPX A Rod for mechanical reset button (l=mm) LPX A170 Spare standard key set for selector switches or mushroomhead buttons, key code n LPX A170R Spare key set for selector switches or mushroom head buttons, LPC.. R type LPX B0 Flush-extended spring return actuator with no cap or lens LPX B Shrouded spring return actuator with no cap or lens LPX B LPX B0 LPXQ0 Flush-extended push-push actuator with no cap LPXQL0 Illuminated flush-extended push-push actuator with no lens Flush cap for spring-return actuators. LPX B Black LPX B Green LPX B Red LPX B Yellow LPX B Blue LPX B White Extended cap for spring-return actuators. LPX B0 Black LPX B0 Green LPX B0 Red LPX B0 Yellow LPX B0 Blue LPX B0 White LPX BL LPX BL0 Flush lens for illuminated spring-return actuators. LPX BL Green LPX BL Red LPX BL Yellow LPX BL Blue LPX BL7 Transparent Extended lens for illuminated spring-return actuators. LPX BL0 Green LPX BL0 Red LPX BL0 Yellow LPX BL0 Blue LPX BL07 Transparent Versions with different key code. Complete with the numeric code of the key. The following versions are available: 1E, A, 0E, 11A, E. Plastic disk for mushroom head pushbuttons LPX AU0 LPX AU LPX AU LPX AU9 LPX AU1 LMT A1 LPX AU00 Threaded ring for actuator fixing LPX AU0 Label holder for blank or engraved plastic LPX AU9 label LPX AU9 Engravable silver plastic label to use with LPX AU0 holder LPX AU Label holder for blank or engraved LPX AU label LPX AU Engravable silver plastic label to use with LPX AU holder LPX AU1 Rubber boot for flush button LPC B1/BL1/R1... LPX AU1 Rubber boot for buttons LPC B/B/BL/R... LPX AU17 Rubber boot for double and triple-touch buttons, transparent LPX AU17 Rubber boot for mush-room head buttons, LPC B/B/B7/BL..., transparent LPX AU1 Padlockable protection, Ø-mm locks for buttons LPC B/B7/B/BL...; for LPC B... Ø-mm locks only LPX P M0 cable gland with threaded ring for LPZ control stations LMT A11 Ø0mm hole size adapter set for mm (use per hole) LMT A1 Selector protection shroud for knob type only LMT A00 Socket spanner/wrench for fixing ring fitting, metal For flush and extended push buttons, comple the order code by adding the digit of the required colour: (black); (green); (red); (yellow); (blue); 7 (transparent); (white). For illuminated push buttons, add only digit 7 (transparent). Cannot be used when LPX AU0 or LPX AU is fitted. Cannot be used when LPX AU1 is fitted. Cannot be used when LPX AU17 is fitted. LPX AU11 LPX AU1 LPX AU11 EMERGEY/STOP Ø90mm LPX AU11 EMERGEY/STOP Ø0mm LPX AU11 ARRET D URGEE / T-AUS / PARO EMERGEIA Ø0mm LPX AU1 EMERGEY STOP adhesive label, size.xmm Labels with text for LPX AU0 legend holder LMT AGB0 General use. LMT AU0 Blank for writing LMT AU07 Sheet with labels for laser printing LMT AU0 Sheet with laser-printed labels LMT AGB1 CLOSE LMT AGB0 EMERGEY LMT AGB1 FAST LMT AGB FAULT LMT AGB1 FORWARD LMT AGB LEFT LMT AGB1 LOWER LMT AGB1 OFF LMT AGB ON LMT AGB11 OPEN LMT AGB9 POWER ON LMT AGB7 RAISE LMT AGB RESET LMT AGB REVERSE LMT AGB17 RIGHT LMT AGB1 RUNNING LMT AGB SLOW LMT AGB START LMT AGB0 STOP LMT AGB1 STOP RESET LMT AGB0 THERMAL FAULT LMT AGB7 TRIP International labels for pushbuttons. LMT AU00 O LMT AU I LMT AU0 II For selector switches. LMT AI AUTO-MAN LMT AI AUTO-O-MAN LMT AI1 MAN-AUTO LMT AI MAN-O-AUTO LMT AGB FWD-O-REV LMT AGB OFF-ON LMT AGB STOP-START International labels for selector switches. LMT AU0 O-I LMT AU0 I-II LMT AU0 I-O-II Recommended use with LPX AU9 blank label. Complete code with required label text. For Info: sales@switchesunlimited.com www.switchesunlimited.com Phone: 00-1-07 Fax: 71-7-70