Advantages InForm racks are fitted between the vertical profiles and thus ensure a generous amount of open working table surface. Devices are installed directly in the 3HU and 6HU racks, additional devices or other objects can be placed on top of or in them in the case of shelf or storage racks. Racks for bringing in power supply systems and measurement and testing equipment Elabo offers a multitude of electronic cassettes and electronic inserts, from the central fuse protection and switch unit to the emergency-off switch, all the way to AC and DC stabilisers and to other devices such as function generators or multimeters. This means that the 3HU racks can support the devices of the 3HU system and the 6HU racks can support the devices of both the 3HU and the 6HU systems. Versions in 19" are possible. Storage elements and shelves The use of InForm profiles creates additional storage surfaces. For instance, by keeping individual handheld devices for further measurement at hand. Shelf unit racks Elabo offers not only the materials but also well-thought-out solutions for workstation design. For instance with shelf racks, which can also be fastened above a measurement and testing rack. This means that every employee has his or her devices in place, and can. if necessary also store them away from third-party access in a lockable roller shutter cabinet. Elabo LaboratorySystems L 50
Advantages Unit All Elabo desktop racks are made of 19 mm thick multiple-layer plywood. Thanks to the melamine resin coating, they are abrasion-proof and anti-glare. The exception is the 3HU aluminium channel. This is made of a stable extruded aluminium profile. Thanks to the surrounding groove of the channel, accessories such as illumination or gauges can be mounted there. Desktop racks 6HU Elabo table racks, systems 6HU / 19" can hold insert plates and inserts. The required access to the rear Z profile rails is always guaranteed due to the removable aluminium rear wall. Aluminium Desktop racks 3HU The vertical struts divide the desktop rack in the changeable width grid. They are therefore screwed onto the profile frame so that they can be removed. The cage nuts used allow the inserts to be mounted securely. On the desktop racks 3HU, the aluminium profile running longitudinally along the bottom of the unit lends additional support to the sturdy frame construction. The required access to the rear Z profile rails is always guaranteed due to the removable aluminium rear wall. The Elabo 3 HU eurocassette mains supply is carried out via the high-power connector with leading ground contact mounted on the rear side. Supply All built-in components are supplied through a network bus rail. Inserts are guided exactly through the also modifiable guide rails and connected securely to the network bus. The connectors are designed for operation with mains voltage 400 V / 16 A AC. Elabo LaboratorySystems L 51
07951/307-0 Crailsheim 07951/307-0 Crailsheim InForm Superstructures System 60 mounting rails Mounting rail For holding sockets and data outlets as well as compressed air supply lines, made of powder coated steel plate For table width 2000 mm For table width 1800 mm For table width 1600 mm For table width 1500 mm For table width 1200 mm 1920 x 51 x 66 1720 x 51 x 66 1520 x 51 x 66 1420 x 51 x 66 1120 x 51 x 66 75-3H 75-3K 75-3N 75-3L 75-3M Socket strip Plastic socket strip with mains connection plug and directly bypassed power outlet socket System GST-18, sockets rotated 45 for angle plug. Colour: black 3 Schuko sockets On/Off switch, 3 Schuko sockets On/Off switch, 5 Schuko sockets Optionally switched power outlet socket available C1-8A C1-8B C1-8C C1-8D Socket strip Plastic socket strip including power input plug for mains connection and directly bypassed power outlet socket. The sockets are designed for plugs angled at 45. Colour: black 1 2-pole illuminated On/Off switch 2 10A circuit breakers 3 sockets 5 sockets Optionally switched power outlet socket available C1-8G C1-8H Elabo LaboratorySystems L 52
System 60 mounting rails Socket strip Plastic socket strip including power input plug for mains connection and directly bypassed power outlet socket. The sockets are designed for plugs angled at 45. Colour: black 1 2-pole illuminated On/Off switch 2 10A circuit breakers 1 residual current circuit breaker 25 A / 30 ma 3 sockets or 5 sockets C1-8J C1-8K System strip Plastic strip with different modules Emergency-off button (2 x NC contacts) C1-8P 2x compressed air NW5 2x compressed air NW7.2 C1-8R C1-8S 3x NFN 2x RJ45 and 3x NFN C1-8Q Z01 C1-8Q Z02 System strip Plastic strip RJ45 2x RJ45 Cat. 5 shielded C1-8Q 2 x 2x RJ45 Cat. 6 C1-8Q Z602 Mains cable 3-pole cable with a 1.5 mm 2 cross-section, for mains connection and connection of the System 60 socket strips. Schuko plug GST-18 socket Schuko plug GST-18 socket Schuko plug GST-18 socket GST-18 plug GST-18 socket GST-18 plug GST-18 socket GST-18 plug GST-18 socket L = 200 cm L = 300 cm L = 400 cm L = 50 cm L = 00 cm L = 250 cm C1-8V ZL200 C1-8V ZL300 C1-8V ZL400 C1-8W ZL50 C1-8W ZL100 C1-8W ZL250 Elabo LaboratorySystems L 53
System 3HU power supply duct The light grey coated extruded aluminium profile makes the power supply duct suitable for the installation of simple power supply systems. Thanks to the surrounding grooves, a multitude of accessories can be securely fastened in place, e.g. workstation lights, TFT holders or gauges. Attachment The channel is fastened between the vertical profiles, which means that it can be fitted at variable heights can also be modified after a purchase. Furthermore, it can also be combined with other objects, e.g. with a storage element. 3 cable outlets each on the side and underneath allow simple cable routing. Wiring Already designed with a 3-phase central wiring, the supply channel can be equipped immediately. Equipment For the equipping of the channels, the insert plates from the 3HU system of the Elabo Electronics range can be utilised in the 5.08 mm separation grid pursuant to DIN 41494 (1HP = 5.08 mm). Power supply duct System 3 HU For holding 372HP For holding 332HP For holding 294HP For holding 276HP For holding 216HP 1928 x 160 x 142 1728 x 160 x 142 1528 x 160 x 142 1428 x 160 x 142 1128 x 160 x 142 75-4E 75-4A 75-4D 75-4B 75-4C Cover strips, suitable for groove width 8.4 mm. Colour: black: Customer can cut to size for the appropriate duct width 2000 x 9 x 7 (Length) 81-6N Elabo LaboratorySystems L 54
System 3HU / 19" Devices For inserts and insert plates for 3HU desktop racks, see Elabo Electronics Order Catalogue, Chapter 3HU. Standardised separation grid 3HU desktop racks are prepared for holding 3HU front panels and 3HU inserts from the Elabo Electronics range in a 5.08 mm separation grid acc. DIN 41494 (1HP = 5.08 mm). 657 451 353 Other brands which accord to this standard can also easily be installed into the racks. Material and set-up The rack body is made of 19 mm-thick, 3-layer fine chipboard in light grey. The 19" separation grid mechanism is integrated into the unit; longitudinal aluminium profiles at the front and the rear enable installation of the inserts. Ergonomics The ergonomic 10 incline of the operating front panel makes it easier for users to work at the bench racks, and makes the display easy to read. Cooling profile Rear wall Insert, eurocassette Terminal Profile cover Vertical profile At the rear, a removable aluminium back wall and an aluminium cooling profile running along the front facilitate practical heat transmission. Bearing load Elabo racks are connected with a basic carrier or terminal for particularly high stability. Desktop rack Dimensions For racks with terminal technology Elabo LaboratorySystems L 55
System 3HU / 19" 3HU racks with terminal technology Desktop rack 3HU Equipment width 376 HP Equipment width 336 HP Equipment width 296 HP Equipment width 276 HP Equipment width 216 HP Vertical profile (in pairs) with fastening fittings and profile covers 2000 x 320 x 206 1800 x 320 x 206 1600 x 320 x 206 1500 x 320 x 206 1200 x 320 x 206 34 x 123 x 657 74-2G 74-2A 74-2D 74-2B 74-2C 74-2X Bare terminal Made of extruded aluminium profile with 3 mm aluminium front panels; can be retrofitted with socket inserts and lamp 73-5G 73-5A 73-5D 73-5B 73-5C Socket terminal 73-6G 73-6A 73-6D 73-6B 73-6C Lamp terminal 30 W lamp, light colour 840 18 W lamp, light colour 840 73-7G 73-7A 73-7D 73-7B 73-7C Example order for table width 1500 mm InForm desktop rack 74-2B InForm vertical profile 74-2X InForm socket terminal 73-6B Elabo LaboratorySystems L 56
System 3HU / 19" 3HU racks with terminal technology Desktop rack 3HU 132 HP, for table depth 800 mm 160 HP, for table depth 900 mm 188 HP, for table depth 1000 mm No vertical profiles required. Table depths 850, 950 and 1050 also available. Article number of the respective smaller table + ZSE (table depth 850 = 74-2L ZSE). 1186 x 330 x 206 1328 x 330 x 206 1470 x 330 x 206 74-2L 74-2N 74-2M Bare corner terminal For table depth 800 mm For table depth 900 mm For table depth 1000 mm Made of aluminium extruded profile with 3 mm aluminium front panels; can be retrofitted with socket inserts and lamp Table depths 850, 950 and 1050 are available, see 74-2L. 1095 x 105 x 98 1234 x 105 x 98 1378 x 105 x 98 73-5L 73-5N 73-5M Socket terminal Equipment: 1 illuminated rocker switch 6 Schuko sockets Table depths 850, 950 and 1050 are available, see 74-2L. 1095 x 105 x 98 1234 x 105 x 98 1378 x 105 x 98 73-6L 73-6N 73-6M Lamp terminal Equipment: 18 W lamp, light colour 840 1 illuminated rocker switch Without Schuko sockets Table depths 850, 950 and 1050 are available, see 74-2L. 1095 x 105 x 98 1234 x 105 x 98 1378 x 105 x 98 73-7L 73-7N 73-7M Order example for table depth 1000 mm InForm desktop rack 74-2M InForm corner socket terminal 73-6M Elabo LaboratorySystems L 57
System 3HU / 19" 3HU racks with basic racks - suitable for the utilisation of the unique Elabo cable management system Basic rack The stabilising fitting 75-5V can also be used to increase the load capacity. We would be happy to advise you. For table width 2000 mm For table width 1800 mm For table width 1600 mm For table width 1500 mm For table width 1200 mm Colour: light grey 1928 x 143 x 58 1728 x 143 x 58 1528 x 143 x 58 1428 x 143 x 58 1128 x 143 x 58 75-5E 75-5A 75-5D 75-5B 75-5C Organisation panel The cable rakes for kink-free wire placement from the measuring line drawer outward is part of this unique Elabo cable management system. For table width 2000 mm For table width 1800 mm For table width 1600 mm For table width 1500 mm For table width 1200 mm Lock for organisation panel 1927 x 155 x 55 1727 x 155 x 55 1527 x 155 x 55 1427 x 155 x 55 1127 x 155 x 55 75-5F 75-5G 75-5H 75-5J 75-5K 75-5R Organisation panel set Basic rack and organisation panel set For table width 2000 mm For table width 1800 mm For table width 1600 mm For table width 1500 mm For table width 1200 mm 75-5Q ZB2000 75-5Q ZB1800 75-5Q ZB1600 75-5Q ZB1500 75-5Q ZB1200 Lock for organisation panel 75-5R Set for basic rack Lamp, socket strip, connection cable and mains connection cable set 1 work station lamp 75-8L inc. mounting set 75-5P 2 socket strips with 3 Schuko sockets C1-8A 1 connection cable Schuko for socket strip 2 m 1 network connection cable 2 m or 2.5 m Only partial equipment possible for table widths of up to 1500 mm for table widths starting with 1600 mm 81-2Y Z03 81-2Y Z04 Elabo LaboratorySystems L 58
System 3HU / 19" 3HU racks with basic racks suitable for the utilisation of the unique Elabo cable management system Lamp Illuminant: 2 x 36 W Connection: 230-240 V/ 50/60 Hz / IP20, parabolic grid Inc.. 2 fluorescent lamps, electronic ballast Incline angle: 0-35 degrees Illumination intensity: Emin 417 lx, Em: 655 lx, Emax: 843 lx 909 75-8L Mounting set 75-5P Socket strip System 60 for fastening in the basic rack 3x Schuko sockets. Plastic socket strip with power input plug and directly bypassed power outlet socket. System GST-18, sockets turned 45 for angled plugs, black. C1-8A Mains connection cable Schuko plug + GST 18/3 Cable length: L = 3000 mm Cable length: L = 5000 mm C1-8V ZL300 C1-8V ZL500 Mains connection cable Socket + plug GST 18/3 Cable length: L = 1500 mm Cable length: L = 2500 mm C1-8W ZL150 C1-8W ZL250 3-pole cable with a 1.5 mm 2 cross-section, for mains connection and connection of the System 60 socket strips. Other lengths available on request. Elabo LaboratorySystems L 59
System 3HU / 19" 3HU racks with basic racks suitable for the utilisation of the unique Elabo cable management system Riser duct, narrow Riser duct suitable for vertical profiles 74-2X ZH707 and 74-4X ZH850 Riser duct for mounting onto the rear side of InForm aluminium multi-groove profiles; double-sided, with brush profile segment at side for cable feed. Made of powder coated metal plate. Colour: light or basalt grey Inc. mounting material 34 x 59 x 530 75-8Q ZH530 Riser duct, wide Riser duct below basic rack Riser duct for mounting onto the sides of InForm aluminium multi-groove profiles; doublesided, with brush profile segment at side for cable feed. Made of powder coated metal plate. Colour: light or basalt grey Inc. mounting material 120 x 51.5 x 440 75-8P ZH440 Desktop rack 3HU Equipment width 376 HP Equipment width 336 HP Equipment width 296 HP Equipment width 276 HP Equipment width 216 HP Vertical profile (in pairs) with fastening fittings and profile covers 2000 x 320 x 206 1800 x 320 x 206 1600 x 320 x 206 1500 x 320 x 206 1200 x 320 x 206 34 x 123 x 707 74-2G Z01 74-2A Z01 74-2D Z01 74-2B Z01 74-2C Z01 74-2X ZH707 Elabo LaboratorySystems L 60
System 6HU / 19" Material The unit is made of 19 mm-thick, 3-layer melamine resin-coated chipboard. The edges are protected with plastic edge strips. The racks are equipped with a system profile frame. Colour: light grey. Bearing load Elabo racks are connected with a basic carrier or terminal for particularly high stability. Divisions All frame divisions are screwed to each other and can be dismantled so that retrofitting is easily possible. The racks have guide rails and a 6-pole bus system with a leading ground contact. All racks are wired ready for connection. Devices Inserts and insert plates for 6HU desktop racks, see Elabo Electronics Order Catalogue, Chapter 6HU and 19". 801 451 353 Ergonomics The racks are ergonomically mounted above the tabletop using vertical profiles which have to be ordered separately. The cable is fed through the vertical profile. The ergonomic 10 incline of the operating front panel makes it easier for users to work at the bench racks, and makes the display easy to read. Cooling profile Rear wall Insert, System 6HU Desktop rack Terminal Profile cover Vertical profile Dimensions For racks with terminal technology Elabo LaboratorySystems L 61
NOT NOT NOT NOT NOT InForm Superstructures System 6HU / 19" 6HU racks with terminal technology Desktop rack For 16 WU For 15 WU For 13 WU For 12 WU For 9 WU 2000 x 369 x 350 1800 x 369 x 350 1600 x 369 x 350 1500 x 369 x 350 1200 x 369 x 350 74-4G 74-4A 74-4D 74-4B 74-4C Desktop rack vertical profile (in pairs) with fastening fittings and profile covers 34 x 123 x 801 74-4X Bare terminal Made of aluminium extruded profile with 3 mm aluminium front panels; can be retrofitted with socket inserts and lamp 73-5G 73-5A 73-5D 73-5B 73-5C Socket terminal 73-6G 73-6A 73-6D 73-6B 73-6C Lamp terminal 30 W lamp, light colour 840 18 W lamp, light colour 840 73-7G 73-7A 73-7D 73-7B 73-7C Example order for table width 1500 mm InForm desktop rack 74-4B InForm vertical profile 74-4X InForm socket terminal 73-6B Elabo LaboratorySystems L 62
NOT NOT NOT NOT NOT NOT NOT NOT InForm Superstructures System 6HU / 19" 6HU racks with terminal technology Desktop corner racks 5 WU, for table depth 800 mm 5 WU, for table depth 900 mm 7 WU, for table depth 1000 mm 1186 x 369 x 350 1328 x 369 x 350 1470 x 369 x 350 74-4L 74-4N 74-4M No vertical profiles required. Table depths 850, 950 and 1050 also available. Article number of the respective smaller table + ZSE (table depth 850 = 74-4L ZSE). Bare corner terminal For table depth 800 mm For table depth 900 mm For table depth 1000 mm Made of aluminium extruded profile with 3 mm aluminium front panels; can be retrofitted with socket inserts and lamp Table depths 850, 950 and 1050 are available, see 74-4L. 1095 x 105 x 98 1234 x 105 x 98 1378 x 105 x 98 73-5L 73-5N 73-5M Socket terminal Equipment: 1 illuminated rocker switch 6 Schuko sockets Table depths 850, 950 and 1050 are available, see 74-4L. 1095 x 105 x 98 1234 x 105 x 98 1378 x 105 x 98 73-6L 73-6N 73-6M Lamp terminal Equipment: 18 W lamp, light colour 840 1 illuminated rocker switch Without Schuko sockets Table depths 850, 950 and 1050 are available, see 74-4L. 1095 x 105 x 98 1234 x 105 x 98 1378 x 105 x 98 73-7L 73-7N 73-7M Order example for table depth 1000 mm InForm desktop corner racks 74-4M InForm corner socket terminal 73-6M Elabo LaboratorySystems L 63
System 6HU / 19" 6HU racks with basic racks suitable for the utilisation of the unique Elabo cable management system Basic rack The stabilising fitting 75-5V can also be used to increase the load capacity. We would be happy to advise you. For table width 2000 mm For table width 1800 mm For table width 1600 mm For table width 1500 mm For table width 1200 mm Colour: light grey 1928 x 143 x 58 1728 x 143 x 58 1528 x 143 x 58 1428 x 143 x 58 1128 x 143 x 58 75-5E 75-5A 75-5D 75-5B 75-5C Organisation panel The cable rakes for kink-free wire placement from the measuring line drawer outward is part of this unique Elabo cable management system. For table width 2000 mm For table width 1800 mm For table width 1600 mm For table width 1500 mm For table width 1200 mm Lock for organisation panel 1927 x 155 x 55 1727 x 155 x 55 1527 x 155 x 55 1427 x 155 x 55 1127 x 155 x 55 75-5F 75-5G 75-5H 75-5J 75-5K 75-5R Organisation panel set Basic rack and organisation panel set For table width 2000 mm For table width 1800 mm For table width 1600 mm For table width 1500 mm For table width 1200 mm 75-5Q ZB2000 75-5Q ZB1800 75-5Q ZB1600 75-5Q ZB1500 75-5Q ZB1200 Lock for organisation panel 75-5R Set for basic rack Lamp, socket strip, connection cable and mains connection cable set 1 work station lamp 75-8L inc. mounting set 75-5P 2 socket strips with 3 Schuko sockets C1-8A 1 connection cable Schuko for socket strip 2 m 1 network connection cable 2 m or 2.5 m Only partial equipment possible for table widths of up to 1500 mm For table widths of up to 1600 mm 81-2Y Z03 81-2Y Z04 Elabo LaboratorySystems L 64
NOT InForm Superstructures System 6HU / 19" 6HU racks with basic racks suitable for the utilisation of the unique Elabo cable management system Lamp Illuminant: 2 x 36 W Connection: 230-240V/ 50/60 Hz/IP20, parabolic grid Inc.. 2 fluorescent lamps, electronic ballast Incline angle: 0-35 degrees Illumination intensity: Emin 417 lx, Em: 655 lx, Emax: 843 lx 909 75-8L Mounting set 75-5P Riser duct, narrow Riser duct to match the vertical profiles 74-2X ZH707 and 74-4X ZH850 Riser duct for mounting onto the rear side of InForm aluminium multi-groove profiles; double-sided, with brush profile segment at side for cable feed. Made of powder coated metal plate. Colour: light or basalt grey Inc. mounting material 34 x 59 x 530 75-8Q ZH530 Riser duct, wide Riser duct under basic rack Riser duct for mounting onto the sides of InForm aluminium multi-groove profiles; doublesided, with brush profile segment at side for cable feed. Made of powder coated metal plate. Colour: light or basalt grey Inc. mounting material 120 x 51.5 x 440 75-8P ZH440 Desktop rack For 16 WU For 15 WU For 13 WU For 12 WU For 9 WU 2000 x 369 x 350 1800 x 369 x 350 1600 x 369 x 350 1500 x 369 x 350 1200 x 369 x 350 74-4G 74-4A 74-4D 74-4B 74-4C Desktop rack vertical profile (in pairs) with fastening fittings and profile covers 34 x 123 x 850 74-4X ZH850 Elabo LaboratorySystems L 65
Shelf unit racks Dimensions For racks with terminal technology 821 451 353 Material Shelf racks can be used to store devices and files. They are complete with one rear wall made of 19 mmthick, melamine resin-coated 3-layer fine chipboard panels. Roller shutters / sliding doors Versions with either roller shutters or sliding doors with lock are available. With this version, the front of the shelf is not inclined. Shelves The cut edges have plastic edge strips. Depending on the width of the shelf racks, one or two height-adjustable shelves are supplied. Installation With vertical profiles, to be ordered separately, and a terminal or the basic rack, the shelf unit racks can be installed over the tabletop. If a cable feed is required, it can be carried out via cable clamps in the vertical profiles. Shelf unit rack Profile cover Terminal Vertical profile Elabo LaboratorySystems L 66
Shelf unit racks Shelf racks also available with the unique Elabo Cable Management system (see 3HU and 6HU racks). Shelf unit rack 2 intermediate walls and two height-adjustable shelves 1 intermediate wall and one height-adjustable shelf Shelf unit rack vertical profile (in pairs) with fastening fittings and profile covers 78-2P 2000 x 320 x 370 1800 x 320 x 370 1600 x 320 x 370 1500 x 320 x 370 1200 x 320 x 370 34 x 123 x 821 74-6G 74-6A 74-6D 74-6B 74-6C 74-6X Shelf unit rack With roller shutters With sliding doors Also with roller shutters 2000 x 410 x 370 1800 x 410 x 370 1600 x 410 x 370 1500 x 410 x 370 1200 x 410 x 370 74-6M 74-6H 74-6J 74-6K 74-6L Also with sliding doors Matching vertical profile (in pairs) 2000 x 370 x 370 1800 x 370 x 370 1600 x 370 x 370 1500 x 370 x 370 1200 x 370 x 370 34 x 123 x 843 74-6S 74-6N 74-6P 74-6Q 74-6R 74-6X ZH843 Bare terminal Made of aluminium extruded profile with 3 mm aluminium front panels; can be retrofitted with socket inserts and lamp 73-5G 73-5A 73-5D 73-5B 73-5C Socket terminal 73-6G 73-6A 73-6D 73-6B 73-6C Lamp terminal 30 W lamp, light colour 840 18 W lamp, light colour 840 73-7G 73-7A 73-7D 73-7B 73-7C Elabo LaboratorySystems L 67
Storage elements Material and benefits Storage elements consisting of a 30 mmthick and melamine resin-coated 3-layer fine chipboard with postformed edge at front. With this extra storage level, the tabletop remains completely free of measurement devices and files etc. Extendable The storage elements can be retrofitted as a third level onto InForm system tables at any time. To do this, you need additional height profiles and a terminal or a basic rack. Equipment Terminals are available with different equipment: sockets, lamp. earth leakage circuit breaker, emergency-off switch. Basic racks can also be outfitted with different combinations of equipment. Capacity (area load): Up to 1600 mm width: Up to 2000 mm width: 80 kg 60 kg 480 451 353 The use of the base rack and the organisation panel, the cables can be placed efficiently, even when third-party devices are utilised. Storage element Profile cover Terminal Vertical profile F1 Elabo LaboratorySystems L 68
Storage elements Storage elements also available with the unique Elabo Cable Management system (see 3HU and 6HU racks). Storage element With carrier plate rounded off at the front Standard 2000 x 400 x 1800 x 400 x 1600 x 400 x 1500 x 400 x 1200 x 400 x 30 30 30 30 30 74-7G 74-7A 74-7D 74-7B 74-7C ESD Vertical profile (in pairs) 2000 x 400 x 30 1800 x 400 x 30 1600 x 400 x 30 1500 x 400 x 30 1200 x 400 x 30 34 x 123 x 480 74-8G 74-8A 74-8D 74-8B 74-8C 74-7X Bare terminal Made of aluminium extruded profile with 3 mm aluminium front panels; can be retrofitted with socket inserts and lamp 73-5G 73-5A 73-5D 73-5B 73-5C Socket terminal 73-6G 73-6A 73-6D 73-6B 73-6C Lamp terminal With sockets 30 W lamp, light colour 840 18 W lamp, light colour 840 73-7G 73-7A 73-7D 73-7B 73-7C Lamp terminal With sockets, earth leakage circuit breaker, emergency off FI 2-pole 30 ma, Unwired emergency-off switch 30 W lamp, light colour 840 6 Schuko sockets 6 Schuko sockets 4 Schuko sockets 2 Schuko sockets 18 W lamp, light colour 840 2 Schuko sockets 73-7V 73-7Q 73-7T 73-7R 73-7S Elabo LaboratorySystems L 69
Corner storage elements Corner storage element Depth 400 mm Strength 30 mm Standard for Table depth 1186 800 74-7L 1328 900 74-7N 1470 1000 74-7M for Table depth 1257 850 74-7L ZSE 1399 950 74-7N ZSE 1540 1050 74-7M ZSE ESD No vertical profiles required. 1186 800 74-8L 1328 900 74-8N 1470 1000 74-8M 1257 850 74-8L ZSE 1399 950 74-8N ZSE 1540 1050 74-8M ZSE Bare corner terminal Depth 105 mm Height 98 mm Made of extruded aluminium profile with 3 mm aluminium front panels; can be retrofitted with socket inserts and lamp for Table depth 1095 800 73-5L 1234 900 73-5N 1378 1000 73-5M for Table depth 1166 850 73-5L ZSE 1307 950 73-5N ZSE 1449 1050 73-5M ZSE Socket terminal Depth 105 mm Height 98 mm Equipment: 1 illuminated rocker switch 6 Schuko sockets for Table depth 1095 800 73-6L 1234 900 73-6N for Table depth 1166 850 73-6L ZSE 1307 950 73-6N ZSE 2 illuminated rocker switches 1378 1000 73-6M 1449 1050 73-6M ZSE Lamp terminal Depth 105 mm Height 98 mm Equipment: 18 W lamp, light colour 840 1 illuminated rocker switch Without Schuko sockets 2 illuminated rocker switches for Table depth 1095 800 73-7L 1234 900 73-7N 1378 1000 73-7M for Table depth 1166 850 73-7L ZSE 1307 950 73-7N ZSE 1449 1050 73-7M ZSE Order example for table depth 800 mm InForm corner storage element 74-7L InForm corner lamp terminal 73-7L Elabo LaboratorySystems L 70
Functional shelf The functional shelf can be mounted on all desktop racks and attachment elements between the vertical profiles within easy reach above the work surface, as a third level for storage of measurement devices. The table surface remains clear. The shelf is continuously height-adjustable and can be inclined forwards or backwards by 30. In addition, it is self-supporting, i.e. it is used without basic rack or terminal. Anti-slip protection The functional shelves have extruded aluminium profiles powder coated in light grey with grooves at the front and rear. A recessed fibre rail prevents the devices slipping when inclined. Accessories Storage trays, tool holders and an adjustable inclined shelf can be attached to the face end of the system profile. Capacity (area load): Up to 1600 mm width: Up to 2000 mm width: 80 kg 60 kg Functional shelf with system profile 30 Elabo LaboratorySystems L 71
Functional shelf Functional shelf Standard For table width 2000 For table width 1800 For table width 1600 For table width 1500 For table width 1200 ESD For table width 2000 For table width 1800 For table width 1600 For table width 1500 For table width 1200 1928 x 400 x 34 1728 x 400 x 34 1528 x 400 x 34 1428 x 400 x 34 1128 x 400 x 34 1928 x 400 x 34 1728 x 400 x 34 1528 x 400 x 34 1428 x 400 x 34 1128 x 400 x 34 75-6G 75-6A 75-6D 75-6B 75-6C 75-7G 75-7A 75-7D 75-7B 75-7C Corner functional shelf For table depth 800 mm For table depth 900 mm For table depth 1000 mm ESD For table depth 800 mm For table depth 900 mm For table depth 1000 mm Table depths 850, 950 and 1050 also available. Article number of the respective, some what smaller table + ZSE (table depth 850 ESD = 75-7L ZSE). 1186 x 400 x 34 1328 x 400 x 34 1470 x 400 x 34 1186 x 400 x 34 1328 x 400 x 34 1470 x 400 x 34 75-6L 75-6Q 75-6M 75-7L 75-7Q 75-7M Inclined shelf For attaching to a functional shelf Inclined shelf panel made of aluminium sheet with anti-slip coating, horizontally-adjustable across the entire width of the functional shelf and lockable using knurled screw. 210 x 300 75-6N Elabo LaboratorySystems L 72
Accessories for superstructures Vertical profile M5 InForm vertical profiles for any and all racks, consisting of 2 aluminium profiles with fastening fittings and profile covers M5 M6 M8 Vertical profile 250 (in pairs) Vertical profile 480 (in pairs) Vertical profile 801 (in pairs) 34 x 123 x 250 34 x 123 x 480 34 x 123 x 801 78-2C 78-2D 78-2E Riser duct For racks with terminal technology InForm riser duct for side installation onto a vertical profile, for cable feed to the terminal and rack Riser duct left Riser duct right 52 x 57 x 413 52 x 57 x 413 78-2M 78-2N Profile cover InForm profile cover, flat design (in pairs) made of plastic for vertical profiles 34 x 123 x 8 78-2R Snap-on nuts Spring nut M5 for small groove 78-2G M5 M5 M6 M8 Snap-on nut M6 for large groove Snap-on nut M8 for large groove Snap-on nut M5 for large groove 78-2H 78-2J 78-2HZM5 Elabo LaboratorySystems L 73