Test Results Summary for Cisco Unified Wireless LAN Test 7.4 for Japan (Release )

Test Results Summary for Cisco Unified Wireless LAN Test 7.4 for Japan (Release 7.4.100.0) First Published: January 25, 2013 Last Modified: March 25, 2013 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-28857-01

2013 Cisco Systems, Inc. All rights reserved.

CONTENTS CHAPTER 1 Cisco Wireless LAN Solution Test 1 Cisco Wireless LAN Solution Test 1 CHAPTER 2 Test Topology and Environment Matrix 5 Test Topology 5 Environment Matrix 6 What's New? 7 Regression Features 8 Open Caveats 8 Resolved Caveats 9 CHAPTER 3 11 New Features 11 Regression Features 43 Adhoc Test Cases 61 Japan SR Cases 64 Related Documentation 70 OL-28857-01 iii

Contents iv OL-28857-01

CHAPTER 1 Cisco Wireless LAN Solution Test Cisco Wireless LAN Solution Test, page 1 Cisco Wireless LAN Solution Test Cisco Wireless LAN Solution Test, an integral part of the enterprise wireless solution, is a program that validates and tests, various Cisco Wireless Products and Features. This is achieved by testing the latest versions of Cisco wireless products. Cisco Wireless LAN Solution Test for Japanese, in turn is an add-on testing at the solution level, where the requirements gathered are specific to Japanese usage and market. The requirements are derived based on the following: New features in 7.4 Customer found defects in selected wireless products High priority scenarios and basic regression features Inputs from Cisco SEs/ TAC The test execution is carried out on selected Cisco Wireless LAN products, which affect the Japanese segment that are prioritized by Cisco Japan team. The following products are covered in the test execution: Wireless LAN Controller 5508 Wireless LAN Controller 2500 Wireless LAN Flex Controller 7500 Virtual Controller Access Point 3500 Access Point 1042 Access Point 1142 Access Point 1262 OL-28857-01 1

Cisco Wireless LAN Solution Test Cisco Wireless LAN Solution Test Access Point 3600 Cisco Prime Network Control System MSE Virtual Appliance ISE Virtual Appliance Cisco Secure ACS WiSM2 Controller Cisco AnyConnect VPN Client Acronyms Acronym AAA ACL ACS AKM AP AVC CAPWAP CCKM CCX CDP CKIP CVBF DCA DTIM DSCP EAP FT FTP FW HA H-REAP IOS Authentication Authorization and Accounting Access Control List Access Control Server Authentication Key Management Access Point Application Visibility and Control. Control and Provisioning of Wireless Access Point Cisco Centralized Key Management Cisco Compatible Extensions Cisco Discovery Protocol Cisco Key Integrity Protocol Cisco Vector Beam Forming Dynamic Channel Assignment Delivery Traffic Indication Map Differentiated Services Code Point Extensible Authentication Protocol Fast Transition File Transfer Protocol Firm Ware High Availability Hybrid Remote Edge Access Point Internetwork Operating System 2 OL-28857-01

Cisco Wireless LAN Solution Test Cisco Wireless LAN Solution Test Acronym ISE LAG LEAP LWAPP MSE NAT NBAR NCS NMSP OEAP PEAP PI PPPoE PSK RADIUS RRM SFTP SNMP SS SSID SSO TCP TFTP UDP vwlc VPN WEP WGB WiSM WLAN WLC Identity Service Engine Link Aggregation Lightweight Extensible Authentication Protocol Lightweight Access Point Protocol Mobility Service Engine Network Address Translation Network Based Application Recognition Network Control System Network Mobility Services Protocol Office Extended Access Point Protected Extensible Authentication Protocol Prime Infrastructure Point-to-Point Protocol over Ethernet Pre-shared Key Remote Authentication Dial-In User Service Radio Resource Management Secure File Transfer Protocol. Simple Network Management Protocol Spatial Stream Service Set Identifier Stateful Switch Over Transmission Control Protocol Trivial File Transfer Protocol. User Datagram Protocol Virtual Wireless LAN Controller Virtual Private Network Wired Equivalent Privacy Workgroup Bridge Wireless Service Module Wireless LAN Wireless LAN Controller OL-28857-01 3

Cisco Wireless LAN Solution Test Cisco Wireless LAN Solution Test Acronym WPA Wi-Fi Protected Access 4 OL-28857-01

CHAPTER 2 Test Topology and Environment Matrix Test Topology, page 5 Environment Matrix, page 6 What's New?, page 7 Regression Features, page 8 Open Caveats, page 8 Resolved Caveats, page 9 Test Topology Figure 1: Topology In Use OL-28857-01 5

Environment Matrix Test Topology and Environment Matrix Environment Matrix Category Controller Application Call control Access Point Switch Component Wireless LAN Controller 5508 Flex Controller 7500 Wireless LAN Controller 2500 WiSM2 Virtual controller PI (Physical, VM) MSE (Physical, VM) ISE (VM) Secure ACS (VM) Cisco Unified Communications Manager Cisco AP 3500 Cisco AP 3600 Cisco AP 1042 Cisco AP 1142 Cisco AP 1262 Cisco 3750 Switch Cisco 6500 Switch Version 7.4.100.0 7.4.100.0 7.4.100.0 7.4.100.0 7.4.100.0 2.0.0.0.121 7.4.0.40 1.1.2.145 5.3.0.40 9.0.1.10000-37/9.0.1.1000-1(JP) 15.2 15.2 15.2 15.2 15.2 15 12.2.33-SXJ2 6 OL-28857-01

Test Topology and Environment Matrix What's New? Category Client Chipset Active Directory Browsers Component Operating System (JOS) Apple MacBook Pro (JP Locale) iphone 4 (JP Locale) Samsung Galaxy S-II (JP Locale) Wireless IP Phone 7921G (JP Locale) Wireless IP Phone 7925G (JP Locale) Wireless IP Phone 7926G (JP Locale) MEDIAS (N-07D) (JP Locale) LifeTouch (LT-TLX0W1A) (JP Locale) Cisco AnyConnect VPN Client 5300, 6300 AGN Airport Extreme AD Internet Explorer Opera Mozilla Firefox Safari Chrome Version Windows 7 Enterprise Windows XP Professional Mac OS 10.6.7 ios 6.0 (10A403) 2.3.3 1.4(2) 1.4(2) 1.4(2) Android 4.0.4 Android 4.0.3 Windows 7 Enterprise/3.1.02026 Apple Mac OS 10.6.7/3.1.02026 Samsung Galaxy S-II/2.4.7073 5.5.2(552.11) Windows 2008 R2 Enterprise 8,9 11.50 13.0.1 5.0.4 20 Note We used the Internal Build of Cisco Prime Infrastructure 2.0.0.0.121 which corresponds to the Cisco Prime Infrastructure Version 2.0 Release. What's New? New Features OL-28857-01 7

Regression Features Test Topology and Environment Matrix The following features are new in this release: LAG Support for 7500 SFTP Dot1x and Web-Auth AnyConnect VPN Multiple RADIUS server per SSID NBAR Client Link 2.0 HA N+1 Regression Features Layer 3 Security Layer 2 Security NCS Maps Autonomous to LWAPP Migration Link Aggregation Mode High Availability Roaming AAA FlexConnect Enhancements H-REAP fault tolerance ISE Client Limits per WLAN Band Select Internal/External Web-Auth Backup Restore Open Caveats Defect ID CSCud80846 Defect Error msg shown when configuring DCA Parameters for a WLC in NCS Product NCS 8 OL-28857-01

Test Topology and Environment Matrix Resolved Caveats Resolved Caveats Defect ID CSCud53185 CSCue34763 CSCue77743 CSCue37763 Defect WLC GUI- Refresh button is not working in Local EAP general page Clients hit Idle timeout after successful authentication No option to enable OEAP in WLC GUI or CLI for 3502 AP DP: Support for new nbar protocol pack on transfer download Product WLC WLC WLC WLC Limitations NCS- NCS page loading hangs in Google Chrome browser -(CSCue22778) WLC - APPLE MAC IP address is null after fallback from secondary to primary -(CSCuc31449) OL-28857-01 9

Resolved Caveats Test Topology and Environment Matrix 10 OL-28857-01

CHAPTER 3 Test Results Summary for Cisco Unified Wireless LAN Test 7.4 for Japan (Release 7.4.100.0) New Features, page 11 Regression Features, page 43 Adhoc Test Cases, page 61 Japan SR Cases, page 64 Related Documentation, page 70 New Features LAG Support for 7500 WirelessJ74SLAG.001 Enabling and configuring LAG in WLC 2500/7500 To check whether LAG is and configured via CLI/GUI WirelessJ74SLAG.002 Check if LAG is To check whether LAG is before rebooting the via CLI before WLC(After enabling LAG) rebooting WLC in 2500. WirelessJ74SLAG.003 Configure multiple To check whether multiple AP-manager interfaces(after AP-managers can be enabling LAG) in 2500. configured after enabling LAG WirelessJ74SLAG.004 Configure multiple AP-manager interfaces are deleted when LAG is in 2500 To check whether multiple AP-managers are deleted after LAG is OL-28857-01 11

New Features WirelessJ74SLAG.005 Configure LAG for all of the connected ports in the neighbor switch for 2500 series WLC To configure LAG for all connected ports of neighbor switch WirelessJ74SLAG.006 Check if any single Link goes down, traffic migrates to the other Links for 2500 series WLC To check if any single Link goes down, traffic migrates to the other Links WirelessJ74SLAG.007 Check if all APs are still connected even if any single Link goes down for 2500 series WLC To check if all APs are still connected even if any single Link goes down WirelessJ74SLAG.008 Check if management, static AP-manager, and dynamic interfaces are moved to port 1 when LAG is disabled for 2500 series WLC To check if management, static AP-manager, and dynamic interfaces are moved to port 1 when LAG is disabled WirelessJ74SLAG.009 Check if Primary and Sec ports can be configured when LAG is for 2500 series WLC To check if Primary and Sec ports can be configured when LAG is WirelessJ74SLAG.010 Check if LAG is before rebooting the WLC (After enabling LAG) in 7500. To check whether LAG is via CLI before rebooting WLC WirelessJ74SLAG.011 Configure multiple AP-manager interfaces (After enabling LAG) in 7500. To check whether multiple AP-managers can be configured after enabling LAG WirelessJ74SLAG.012 Configure multiple AP-manager interfaces are deleted when LAG is in 7500 To check whether multiple AP-managers are deleted after LAG is WirelessJ74SLAG.013 Configure LAG for all of the connected ports in the neighbor switch for 7500 series WLC To configure LAG for all connected ports of neighbor switch WirelessJ74SLAG.014 Check if any single Link goes down, traffic migrates to the other Links for 7500 series WLC To check if any single Link goes down, traffic migrates to the other Links 12 OL-28857-01

New Features WirelessJ74SLAG.015 Check if all APs are still connected even if any single Link goes down for 7500 series WLC To check if all APs are still connected even if any single Link goes down WirelessJ74SLAG.016 Check if management, static AP-manager, and dynamic interfaces are moved to port 1 when LAG is disabled for 7500 series WLC To check if management, static AP-manager, and dynamic interfaces are moved to port 1 when LAG is disabled WirelessJ74SLAG.017 Check if Primary and Sec ports can be configured when LAG is for 7500 series WLC To check if Primary and Sec ports can be configured when LAG is WirelessJ74SLAG.027 Performing Mac Filtering with Clients registered in ACS server- 2500 Controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.028 Performing Mac Filtering with Clients registered in ACS server- 7500 Controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.030 Performing Mac Filtering and Mac Auth or Dot1x -2500 Controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.031 Performing Mac Filtering and Mac Auth or Dot1x -7500 Controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.033 Performing Mac Filtering with WPA2+PSK - 2500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is OL-28857-01 13

New Features WirelessJ74SLAG.034 Performing Mac Filtering with WPA2+PSK - 7500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.036 Performing Mac Filtering with CKIP - 2500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.037 Performing Mac Filtering with CKIP - 7500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.039 Performing Mac Filtering with Static WEP - 2500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.040 Performing Mac Filtering with Static WEP - 7500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.042 Performing Mac Filtering with 802.1x - 2500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.043 Performing Mac Filtering with 802.1x - 7500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is 14 OL-28857-01

New Features WirelessJ74SLAG.045 Performing Mac Filtering with WPA2+PEAP - 2500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.046 Performing Mac Filtering with WPA2+PEAP - 7500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.048 Performing Mac Filtering with WPA2+LEAP - 2500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.049 Performing Mac Filtering with WPA2+LEAP - 7500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.051 Performing Mac Filtering alone with Clients registered in ISE server - 2500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.052 Performing Mac Filtering alone with Clients registered in ISE server - 7500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.054 Performing 802.1x alone in ISE server - 2500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs 802.1x when LAG is OL-28857-01 15

New Features WirelessJ74SLAG.055 Performing 802.1x alone in ISE server - 7500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs 802.1x when LAG is WirelessJ74SLAG.057 Performing Mac auth or Dot1x in ISE server-unregistered Clients for 2500 controller when LAG is To check whether unregistered client is successfully authenticated and associated with WLANs Mac Filtering/802.1x when LAG is WirelessJ74SLAG.058 Performing Mac auth or Dot1x in ISE server-unregistered Clients for 7500 controller when LAG is To check whether unregistered client is successfully authenticated and associated with WLANs Mac Filtering/802.1x when LAG is WirelessJ74SLAG.060 Performing Mac auth in ISE server-registered Clients - 2500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering/802.1x when LAG is WirelessJ74SLAG.061 Performing Mac auth in ISE server-registered Clients - 2500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering/802.1x when LAG is WirelessJ74SLAG.062 Performing Mac auth in ISE server-registered Clients - 2500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering/802.1x when LAG is WirelessJ74SLAG.063 Performing Mac Filtering with WPA2+PEAP with Clients registered in ISE server- 2500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is 16 OL-28857-01

New Features WirelessJ74SLAG.064 Performing Mac Filtering with WPA2+PEAP with Clients registered in ISE server- 7500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.066 Performing Mac Filtering with WPA2+LEAP with Clients registered in ISE server - 2500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.067 Performing Mac Filtering with WPA2+LEAP with Clients registered in ISE server - 7500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.069 Performing Mac Filtering with WEP with Clients registered in ISE server - 2500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is WirelessJ74SLAG.070 Performing Mac Filtering with WEP with Clients registered in ISE server - 7500 controller when LAG is To check whether registered client is successfully authenticated and associated with WLANs Mac Filtering when LAG is SFTP Defect WirelessM7.4.SFTP1 Transfer download of controller image with SFTP method- WLC 5500series, WiSM2, 2500 series To verify if controller is able to download the image using SFTP method and installs properly WirelessM7.4.SFTP2 Transfer download of controller image with SFTP method - WLC 7500 & Virtual WLC. To verify if controller is able to download the image using SFTP method and installs properly OL-28857-01 17

New Features Defect WirelessM7.4.SFTP3 Transfer of controller configuration with SFTP method - WLC 5500, 2500, WiSM2. To verify if controller is able to download a configuration and upload the current configuration using SFTP transfer method WirelessM7.4.SFTP4 Transfer of controller configuration with SFTP method - WLC 7500,Virtual. To verify if controller is able to download a configuration and upload the current configuration using SFTP transfer method WirelessM7.4.SFTP5 Transfer download of controller certificates with SFTP method - WLC 5500, 2500, WiSM2 To verify if controller is able to download all the supported certificates using SFTP transfer method WirelessM7.4.SFTP6 Transfer download of controller certificates with SFTP method - WLC Virtual and 7500 To verify if controller is able to download all the supported certificates using SFTP transfer method WirelessM7.4.SFTP7 Transfer download of other data type files with SFTP method - WLC 5500, 2500 and WiSM2 To verify if controller is able to download all the other supported datatype files using SFTP transfer method WirelessM7.4.SFTP8 Transfer download of other data type files with SFTP method - WLC Virtual and 7500 To verify if controller is able to download all the other supported datatype files using SFTP transfer method WirelessM7.4.SFTP9 SFTP Transfer provided with invalid user name and password - All Controller platforms. To verify if controller aborts the transfer if the username and /or password is given wrong - All controllers WirelessM7.4.SFTP10 SFTP Transfer validation with other configuration items like, path, filename, server ip and port number - All Controllers To verify if controller validates properly the transfer parameters like server ip address, Port number, filename, and path. Transfer is aborted if any of the above configuration parameters are in-correct or server issues - All controllers WirelessM7.4.SFTP11 Transfer upload of other data type files with SFTP method - WLC Virtual & 7500 To verify if controller is able to upload all the other supported data type files using SFTP transfer method - WLC Virtual & 7500 18 OL-28857-01

New Features Defect WirelessM7.4.SFTP12 Transfer upload of other data type files with SFTP method - WLC 5500 series, 2500 and WiSM2 To verify if controller is able to upload all the other supported data type files using SFTP transfer method- WLC 5500, 2500 & WiSM2. WirelessM7.4.SFTP13 Transfer upload and download of all supported data type files on platforms - Virtual WLC and Flex 7500 using SFTP method To verify if all the supported controller platforms are able to upload and download all supported data type files using SFTP transfer method ( CT 7510, and vwlc) WirelessM7.4.SFTP14 Transfer upload and download of all supported data type files on platforms - WLC 5500,2500 and WiSM2 using SFTP method To verify if all the supported controller platforms are able to upload and download all supported data type files using SFTP transfer method (CT 5508, CT 2504, WiSM2) WirelessM7.4.SFTP15 SFTP transfer with the application of ACL rules - WLC platform 5508, 2504 & WiSM2 To verify if controller aborts the transfer of file when the ACL rule is applied - WLC platform 5508, 2504 and WiSM2 WirelessM7.4.SFTP16 SFTP transfer with the application of ACL rules - vwlc & Flex 7500 To verify if controller aborts the transfer of file when the ACL rule is applied - vwlc and flex 7500 WirelessM7.4.SFTP17 Abort of SFTP transfer when the server is shutdown - CT 5508, CT 2504 & WiSM2 To verify if controller aborts the SFTP transfer when the server is shutdown or the SFTP service is stopped in CT 5508, CT 2504 & WiSM2 WirelessM7.4.SFTP18 Abort of SFTP transfer when the server is shutdown - Virtual WLC & flex 7500 To verify if controller aborts the SFTP transfer when the server is shutdown or the SFTP service is stopped in vwlc and flex 7500 WirelessM7.4.SFTP19 Packet capture of SFTP transfer from controllers 5508, 2500 and WiSM2 To capture the SFTP transfer packets in controllers using wireshark and verify the secure transfer WirelessM7.4.SFTP20 Packet capture of SFTP transfer from controllers vwlc and flex 7500 To capture the SFTP transfer packets in controllers using wireshark and verify the secure transfer OL-28857-01 19

New Features Defect WirelessM7.4.SFTP21 Encrypted upload of Configuration file in CT 5508, CT 2504 & WiSM2 To verify if the configuration file is encrypted after upload from the controllers 5508,2500 and WiSM2 WirelessM7.4.SFTP22 Encrypted upload of Configuration file in vwlc and flex 7500 To verify if the configuration file is encrypted after upload from the controllers vwlc and flex 7500 WirelessM7.4.SFTP23 Encrypted download of Configuration file in CT5508, CT2504 and WiSM2 To verify if the encrypted configuration file is downloaded by the controller when the right 16 char encryption key is entered in controllers 5508, 2504 and WiSM2. Also try different key combinations and verify the appropriate results WirelessM7.4.SFTP24 Encrypted download of Configuration file in vwlc and flex 7500. To verify if the encrypted configuration file is downloaded by the controller when the right 16 char encryption key is entered in controllers vwlc and flex 7500. Also try different key combinations and verify the appropriate results WirelessM7.4.SFTP25 Apple MacBook - Transfer download of controller image with SFTP method To verify if controller is able to download the image using SFTP method and installs properly in Apple MacBook WirelessM7.4.SFTP26 Apple MacBook - Transfer download of controller certificates with SFTP method in all WLC platforms To verify if controller is able to download all the supported certificates using SFTP transfer method in Apple MacBook WirelessM7.4.SFTP27 Apple MacBook- SFTP Transfer provided with invalid user name and password - all Controller platforms. To verify if controller aborts the transfer if the username and /or password is given wrong - All controllers in Apple MacBook WirelessM7.4.SFTP28 Apple MacBook - Packet capture of SFTP transfer from controllers - all WLC platforms. To capture the SFTP transfer packets in controllers using Wireshark in Apple MacBook and verify the secure transfer 20 OL-28857-01

New Features Defect WirelessM7.4.SFTP29 Message log for SFTP transfer in all platforms To capture the message log for SFTP transfer and verifyit WirelessM7.4.SFTP30 Indifferent randoms combinations of clients for SFTP transfer To have two clients and verify the SFTP transfer upload/download from different clients like Apple Mac, windows Laptop etc. Dot1x and Web-Auth Support WirelessJ74SWeb.001 Authentication of client with Security Dot1x and Web-Auth - WiSM2 & 5500 Controller. To verify the Authentication of the client when connected to a WLAN in which Dot1x and Web-Auth is WirelessJ74SWeb.002 Authentication of client with Security Dot1x and Web-Auth - 2500,7500 and Virtual Controller. To verify the Authentication of the client when connected to a WLAN in which Dot1x and Web-Auth is WirelessJ74SWeb.003 Authentication of client with Security Static WEP and Web-Auth - Virtual and WiSM2 Controller. To verify the Authentication of the client when connected to a WLAN in which Static WEP and Web-Auth is WirelessJ74SWeb.004 Authentication of client with Security Static WEP and Web-Auth - 7500 and 2500 Controller. To verify the Authentication of the client when connected to a WLAN in which Static WEP and Web-Auth is WirelessJ74SWeb.005 Authentication of clients-macbook and Win 7 laptop with Security Static WEP and Web-Auth - 5500& 7500 Controller. To verify the Authentication of the clients when connected to a WLAN in which Static WEP and Web-Auth is. OL-28857-01 21

New Features WirelessJ74SWeb.006 Authentication of clients-macbook and Win 7 laptop with Security Static WEP and Web-Auth -2500& WiSM2 Controller. To verify the Authentication of the clients when connected to a WLAN in which Static WEP and Web-Auth is. WirelessJ74SWeb.007 Authentication of clients-macbook and Win 7 laptop with Security Dot1x and Web-Auth - 5500& 7500 Controller. To verify the Authentication of the clients when connected to a WLAN in which Static WEP and Web-Auth is. WirelessJ74SWeb.008 Authentication of client with Security Static WEP+Dot1x and Web-Auth -2500 and Virtual Controller. To verify the Authentication of the client when connected to a WLAN in which Static WEP+Dot1x and Web-Auth is. WirelessJ74SWeb.009 Authentication of client with Security Static WEP+Dot1x and Web-Auth -5500, 7500 and WiSM2 Controller. To verify the Authentication of the client when connected to a WLAN in which Static WEP+Dot1x and Web-Auth is. WirelessJ74SWeb.010 Authentication of client(apple MacBook) with Security Static WEP+Dot1x and Web-Auth -2500, 7500 & 5500 Controller. To verify the Authentication of the client when connected to a WLAN in which Static WEP+Dot1x and Web-Auth is. WirelessJ74SWeb.011 Authentication of client(apple MacBook) with Security Static WEP and Web-Auth - 2500& 7500 Controller. To verify the Authentication of the client when connected to a WLAN in which Static WEP and Web-Auth is. 22 OL-28857-01

New Features WirelessJ74SWeb.012 Authentication of client(apple MacBook) with Security Dot1x and Web-Auth -2500, 7500 & WiSM2 Controller. To verify the Authentication of the client when connected to a WLAN in which Dot1x and Web-Auth is. WirelessJ74SWeb.013 Authentication of clients(apple MacBook &Win 7) with Security Dot1x and Web-Auth(Same SSID) -5500 and Virtual Controller. To verify the Authentication of the clients when connected to a WLAN in which Dot1x and Web-Auth is. WirelessJ74SWeb.014 Authentication of clients(apple MacBook & Win 7) with Security Dot1x and Web-Auth(Same SSID) - Virtual Controller. To verify the Authentication of the clients when connected to a WLAN in which Dot1x and Web-Auth is. WirelessJ74SWeb.015 Authentication of clients(apple MacBook & Win 7) with Security Static WEP+Dot1x and Web-Auth using ISE - WiSM2 Controller. To verify the Authentication of the clients when connected to a WLAN in which Static WEP+Dot1x and Web-Auth is. WirelessJ74SWeb.016 Authentication of clients(apple MacBook & Win 7) with Security Static WEP+Dot1x and Web-Auth using ISE -2500 & Virtual Controller. To verify the Authentication of the clients when connected to a WLAN in which Static WEP+Dot1x and Web-Auth is. WirelessJ74SWeb.017 Authentication of clients(apple MacBook & Win 7) with Security Static WEP+Dot1x and Web-Auth using ISE- 5500 & 7500 Controller. To verify the Authentication of the clients when connected to a WLAN in which Static WEP+Dot1x and Web-Auth is. OL-28857-01 23

New Features WirelessJ74SWeb.018 Authentication of clients(apple MacBook & Win 7) with Security Dot1x using ISE and Web-Auth 2500 & Virtual Controller. To verify the Authentication of the clients when connected to a WLAN in which Dot1x and Web-Auth is. WirelessJ74SWeb.019 Authentication of clients(apple MacBook & Win 7) with Security Dot1x using ISE and Web-Auth-7500 & WiSM2 Controller. To verify the Authentication of the clients when connected to a WLAN in which Dot1x and Web-Auth is. WirelessJ74SWeb.020 Authentication of clients(apple MacBook & Win 7) with Security Dot1x using ISE and Web-Auth- 5500 Controller. To verify the Authentication of the clients when connected to a WLAN in which Dot1x and Web-Auth is. WirelessJL2,3 security.001 Authentication of client with Security Dot1x and Web-Auth - WiSM2 & 5500 Controller. To Check if the Authentication of the client when connected to a WLAN in which Dot1x and Web-Auth is. WirelessJL2,3 security.002 Authentication of client with Security Static WEP and Web-Auth - Virtual and WiSM2 Controller. To Check if the Authentication of the client when connected to a WLAN in which Static WEP and Web-Auth is. WirelessJL2,3 security.003 Authentication of Win 7 laptop with Security Static WEP and Web-Auth - 5500 & 7500 Controller. Checking for the Authentication of the clients when connected to a WLAN in which Static WEP and Web-Auth is. WirelessJL2,3 security.004 Authentication of client with Security Static WEP+Dot1x and Web-Auth -2500 and Virtual Controller. Checking for the Authentication of the client when connected to a WLAN in which Static WEP+Dot1x and Web-Auth is. 24 OL-28857-01

New Features WirelessJL2,3 security.005 Authentication of clients(apple MacBook & Win 7) with Security Static WEP+Dot1x and Web-Auth using ISE -2500 & Virtual Controller. Checking for the Authentication of the clients when connected to a WLAN in which Static WEP+Dot1x and Web-Auth is. WirelessJL2,3 security.006 Authentication of clients(apple MacBook & Win 7) with Security Dot1x using ISE and Web-Auth 2500 & Virtual Controller. Checking for the Authentication of the clients when connected to a WLAN in which Dot1x and Web-Auth is. AnyConnect VPN WirelessJ74S.AC.001 AnyConnect VPN Connection through GUI. It should bring up Connect dialog in Win7 client. To check if AnyConnect VPN connection through GUI can bring up VPN Connect dialog. WirelessJ74S.AC.002 AnyConnect VPN Connection through GUI. It should bring up Connect dialog in Mac client. To check if AnyConnect VPN connection through GUI can bring up VPN Connect dialog. WirelessJ74S.AC.003 AnyConnect VPN Connection through GUI. It should bring up Connect dialog in Samsung Galaxy S-II client. To check if AnyConnect VPN connection can bring up VPN Connect dialog. WirelessJ74S.AC.004 Disconnecting AnyConnect VPN through Banner in Win7client. To check whether AnyConnect VPN Disconnected through Banner. WirelessJ74S.AC.005 Disconnecting AnyConnect VPN through Banner in Mac client. To check whether AnyConnect VPN Disconnected through Banner. OL-28857-01 25

New Features WirelessJ74S.AC.006 Disconnecting AnyConnect VPN through Banner in Samsung Galaxy S-II client. To check whether AnyConnect VPN is Disconnected through Banner. WirelessJ74S.AC.007 Verifying AnyConnect VPN Credentials To verifyanyconnect VPN Credentials. WirelessJ74S.AC.008 WPA+WPA2 network(anyconnect) in Win7 client To check whether the AnyConnect VPN is connected or not using WPA+WPA2 layer2 security WirelessJ74S.AC.009 Static WEP network(anyconnect) in Win 7 client To check whether the AnyConnect VPN is connected or not, using Static WEP layer2 security. WirelessJ74S.AC.010 Layer 2 security "None" for open auth (AnyConnect) in Win7 client To check whether the AnyConnect VPN is connected or not using "None" Layer 2 security WirelessJ74S.AC.011 Layer 2 security Static-WEP+802.1x network(anyconnect) in Win7 client To check whether the AnyConnect VPN is connected or not using Static-WEP+802.1x Layer 2 security WirelessJ74S.AC.012 Layer 2 security Static-WEP+802.1x network(anyconnect) in MacBook as client To check whether the AnyConnect VPN is connected or not using Static-WEP+802.1x Layer 2 security WirelessJ74S.AC.013 WPA+WPA2 network(anyconnect) using Mac PRO client To check whether the AnyConnect VPN is connected or not, using WPA+WPA2 layer2 security in Mac client WirelessJ74S.AC.014 Static WEP network (AnyConnect) in Mac To check whether the AnyConnect VPN is connected or not using Static WEP layer2 security in Mac WirelessJ74S.AC.015 Layer 2 security "None" for open auth network (AnyConnect) in Mac Client To check whether the AnyConnect VPN is connected or not, using "None" Layer 2 security in Mac Client 26 OL-28857-01

New Features WirelessJ74S.AC.016 Layer 2 security Static-WEP+802.1x network(anyconnect) in Mac Client. To check whether the AnyConnect VPN is connected or not, using Static-WEP+802.1x Layer 2 security in Mac WirelessJ74S.AC.017 WPA+WPA2 network (AnyConnect) using Samsung Galaxy S-II client To check whether the AnyConnect VPN is connected or not, using WPA+WPA2 layer2 security in S-II client WirelessJ74S.AC.018 Static WEP network (AnyConnect) in Samsung Galaxy S-II client To check whether the AnyConnect VPN is connected or not using Static WEP layer2 security in S-II Client WirelessJ74S.AC.019 Layer 2 security "None" for open auth network (Anyconnect) in Samsung Galaxy S-II client. To check whether the AnyConnect VPN is connected or not, using "None" Layer 2 security in Samsung Galaxy S-II Client. WirelessJ74S.AC.021 Verifying Anyconnect VPN connection status in WIN 7 Client roaming to the foreign controller To check whether the AnyConnect client reassociates successfully to a different FlexConnect after roaming within the controller WirelessJ74S.AC.022 AnyConnect VPN using Mac Clients roaming to the foreign controller To check whether the AnyConnect VPN using Mac client reassociates successfully to a different FlexConnect after roaming within the controller WirelessJ74S.AC.023 AnyConnect VPN using Samsung Galaxy S-II Clients roaming to the foreign controller To check whether the AnyConnect VPN using Samsung Galaxy S-II client reassociates successfully to a different FlexConnect after roaming within the controller WirelessJ74S.AC.024 Anyconect VPN WIN 7 Clients roaming(fast Roam CCKM) to a different FlexConnect on the foreign controller To verify if AnyConnect VPN WIN 7 client reassociates successfully to a different FlexConnect after roaming to a foreign controller OL-28857-01 27

New Features WirelessJ74S.AC.025 AnyConnect VPN Mac Client roaming(fast Roam CCKM) to a different FlexConnect on the foreign controller To verify if AnyConnect VPN Mac client reassociates successfully to a different FlexConnect after roaming to a foreign controller WirelessJ74S.AC.026 AnyConnect VPN Samsung Galaxy S-II Client roaming(fast Roam CCKM) to a different FlexConnect on the foreign controller To verify if AnyConnect VPN Samsung Galaxy S-II client reassociates successfully to a different FlexConnect after roaming to a foreign controller WirelessJ74S.AC.027 AnyConnect VPN Integration with post-logon networks using Win7 clients To verify if AnyConnect VPN Integration with post-logon networks WirelessJ74S.AC.028 AnyConnect VPN Integration with post-logon networks using Mac clients To verify if AnyConnect VPN Integration with post-logon networks using Mac Clients WirelessJ74S.AC.029 AnyConnect VPN Integration with post-logon networks using Samsung Galaxy S-II client To verify if AnyConnect VPN Integration with post-logon networks using Samsung Galaxy S-II Client works succesfully WirelessJ74S.AC.030 Reconnecting AnyConnect VPN while Wi-Fi connect disconnected in Win7 To verify if Anyconnect VPN connection reconnect s, when Wi-Fi is disconnected. WirelessJ74S.AC.031 Reconnecting AnyConnect VPN while Wi-Fi disconnected in Mac To verify if Anyconnect VPN connection reconnects, when Wi-Fi is disconnected. WirelessJ74S.AC.032 Reconnecting AnyConnect VPN while Wi-Fi disconnected in Samsung Galaxy S-II client To verify if Anyconnect VPN connection reconnects, when Wi-Fi is disconnected. WirelessJ74S.AC.033 Reconnecting AnyConnect VPN while Wi-Fi connected status in Win7client To verify if AnyConnect VPN Integration with post-logon networks using Win7 Client is successful WirelessJ74S.AC.034 Reconnecting AnyConnect VPN while Wi-Fi connected status in Mac client To verify if AnyConnect VPN Integration with post-logon networks using Mac Client is successful 28 OL-28857-01

New Features WirelessJ74S.AC.035 Reconnecting AnyConnect VPN while Wi-Fi connected status in Samsung Galaxy S-II client To verify if AnyConnect VPN Integration with post-logon networks using Samsung Galaxy S-II Client is successful WirelessJ74S.AC.036 AnyConnect VPN Integration with post-logon networks using Win7clients To verify if AnyConnect VPN Integration with post-logon networks using Win7 Client is successful WirelessJ74S.AC.037 AnyConnect VPN Integration with post-logon networks using Win7client To verify if AnyConnect VPN Integration with post-logon networks using Win7 Client is successful WirelessJ74S.AC.038 AnyConnect VPN Integration with post-logon networks using Win7client To verify if AnyConnect VPN Integration with post-logon networks using Win7 Client is successful WirelessJ74S.AC.039 AnyConnect VPN - Inter controller roaming within the same subnet in Win7client To verify if inter controller roaming within the same subnet in Win7 client is successful WirelessJ74S.AC.040 AnyConnect VPN - Inter controller roaming within the same subnet in Mac client To verify if inter controller roaming within the same subnet in Mac client is successful WirelessJ74S.AC.041 AnyConnect VPN - Inter controller roaming within the same subnet in Samsung Galaxy S-II client To verify if inter controller roaming within the same subnet in Samsung Galaxy S-II client is successful WirelessJ74S.AC.042 AnyConnect VPN - Inter controller roaming within the different subnet in Win7client To verify if inter controller roaming using different subnet in Win7 client is successful WirelessJ74S.AC.043 AnyConnect VPN - Inter controller roaming within the different subnet in in Mac client To verify if inter controller roaming using different subnet in Mac client is successful WirelessJ74S.AC.044 AnyConnect VPN - Inter controller roaming within the different subnet in Samsung Galaxy S-II client To verify if inter controller roaming using different subnet in Samsung Galaxy S-II client is successful OL-28857-01 29

New Features WirelessJ74S.AC_0001 AnyConnect VPN Connection through GUI. It should bring up Connect dialog in Mac client. To check AnyConnect VPN connection if it brings up VPN Connect dialog. WirelessJ74S.AC_0002 Layer 2 security Static-WEP+802.1x network(anyconnect) in Win7 client (ISE) To check whether the AnyConnect VPN is connected or not in Win7 JOS client using Static-WEP+802.1x Layer 2 security in WLAN against ISE WirelessJ74S.AC_0003 Layer 2 security 802.1x network(anyconnect) in Win7 client (ISE) To check whether the AnyConnect VPN is connected or not in WIN 7JOS Client using 802.1x Layer 2 security in WLAN against ISE. WirelessJ74S.AC_0004 Layer 2 security 802.1x network(anyconnect) in Win7 client (ACS) To check whether the AnyConnect VPN is connected or not in WIN 7 JOS client using 802.1x Layer 2 security in WLAN against ACS. WirelessJ74S.AC_0005 Layer 2 security Static-WEP+802.1x network(anyconnect) in Win7 client (ISE) To check whether the AnyConnect VPN is connected or not in Win7 JOS client using Static-WEP+802.1x Layer 2 security in WLAN against ISE Multiple RADIUS server per SSID WirelessJ74S.RAD.001 AP configuration with RADIUS Server configured in FlexConnect group To verify whether the configured RADIUS Server is applied to all APs in that FlexConnect group WirelessJ74S.RAD.002 RADIUS server config in FlexConnect group after WLC upgrade To verify whether the configured RADIUS server per FlexConnect group are retained after WLC upgrade 30 OL-28857-01

New Features WirelessJ74S.RAD.003 Add/Delete RADIUS server in the FlexConnect group To verify the successful addition and deletion of RADIUS servers in the FlexConnect group and APs WirelessJ74S.RAD.004 Add/Delete APs in the FlexConnect group with RADIUS server configured To verify the successful addition and deletion of APs in the FlexConnect group with RADIUS server configured and upon deletion, the server config should be deleted from AP WirelessJ74S.RAD.005 RADIUS Server configuration in AP after AP reboots To verify whether the RADIUS server configuration is retained in AP after AP reboots WirelessJ74S.RAD.006 Client association through Primary RADIUS server at site level To verify whether the Client authentication is done via Primary RADIUS server configured in FlexConnect group WirelessJ74S.RAD.007 Client association through Sec RADIUS server at site level To verify whether the Client authentication is done via Sec RADIUS server configured in FlexConnect group WirelessJ74S.RAD.008 Client authentication in case of Primary RADIUS server fail over To verify whether the Client authentication is done via Sec RADIUS server configured in FlexConnect group in case of Primary RADIUS server is down WirelessJ74S.RAD.009 Performing Mac filtering using Primary RADIUS server in the FlexConnect group To verify whether Mac filtering is done via primary RADIUS server configured in the FlexConnect group and Client is authenticated and associated WirelessJ74S.RAD.010 Performing Mac filtering using Sec RADIUS server in the FlexConnect group To verify whether Mac filtering is done via Sec RADIUS server configured in the FlexConnect group and Client is authenticated and associated OL-28857-01 31

New Features WirelessJ74S.RAD.011 Performing Mac filtering incase of Primary RADIUS server fail over To verify whether Mac filtering is done via Sec RADIUS server in case of primary fail over WirelessJ74S.RAD.012 Performing Dot1x using Sec RADIUS server To verify whether Dot1x authentication for the client is done via Primary RADIUS server configured at site level WirelessJ74S.RAD.013 Performing Dot1x using Primary RADIUS server To verify whether Dot1x authentication for the client is done via Primary RADIUS server configured at site level WirelessJ74S.RAD.014 Performing Dot1x in case of primary RADIUS server fail over To verify whether Dot1x authentication for the client is done via Sec RADIUS server configured at site level after primary fail over WirelessJ74S.RAD.015 Performing Mac-Auth or Dot1x via RADIUS server configured at site level To verify whether Dot1x authentication for the client is done via RADIUS server configured at site level WirelessJ74S.RAD.016 Performing Mac-Auth+Dot1x in case of primary RADIUS server fail over configured at site level To verify whether Dot1x authentication for the client is done via Sec RADIUS server configured at site level after primary fail over WirelessJ74S.RAD.017 Primary RADIUS server authentication over PPPoE AP To verify whether the client authentication is done via primary RADIUS server over PPPoE AP WirelessJ74S.RAD.018 Performing Mac authentication over PPPoE AP with RADIUS servers configured(primary) To verify whether Mac authentication can be performed successfully to the clients associated via the primary RADIUS server over the PPPoE connection with the VLAN mapped 32 OL-28857-01

New Features WirelessJ74S.RAD.019 Performing Mac authentication over PPPoE AP with RADIUS servers configured(sec) To verify whether Mac authentication can be performed successfully to the clients associated via the Sec RADIUS server over the PPPoE connection with the VLAN mapped WirelessJ74S.RAD.020 Performing Mac authentication over PPPoE AP with RADIUS servers configured(primary fail over) To verify whether Mac authentication can be performed successfully to the clients associated via the Sec RADIUS server in case of Primary server failure over the PPPoE connection with the VLAN mapped WirelessJ74S.RAD.021 Performing Dot1x authentication over PPPoE AP with RADIUS servers configured(primary) To verify whether Dot1x authentication can be performed successfully to the clients associated via the Primary RADIUS server over the PPPoE connection with the VLAN mapped WirelessJ74S.RAD.022 Performing Dot1x authentication over PPPoE AP with RADIUS servers configured(sec) To verify whether Dot1x authentication can be performed successfully to the clients associated via the Sec RADIUS server over the PPPoE connection with the VLAN mapped WirelessJ74S.RAD.023 Performing Dot1x authentication over PPPoE AP with RADIUS servers configured (Primary fail over) To verify whether Dot1x authentication can be performed successfully to the clients associated via the Sec RADIUS server over the PPPoE connection with the VLAN mapped WirelessJ74S.RAD.024 Performing Mac-Auth+ Dot1x authentication over PPPoE AP with RADIUS servers configured (Primary) To verify whether Mac-Auth+Dot1x authentication can be performed successfully to the clients associated via the Primary RADIUS server over the PPPoE connection with the VLAN mapped OL-28857-01 33

New Features WirelessJ74S.RAD.025 Performing Mac-Auth+ Dot1x authentication over PPPoE AP with RADIUS servers configured (Sec) To verify whether Mac-Auth+Dot1x authentication can be performed successfully to the clients associated via the Sec RADIUS server over the PPPoE connection with the VLAN mapped WirelessJ74S.RAD.026 Performing Mac-Auth+ Dot1x authentication over PPPoE AP with RADIUS servers configured(primary fail over) To verify whether Mac-Auth+Dot1x authentication can be performed successfully to the clients associated via the Sec RADIUS server after primary failed over the PPPoE connection with the VLAN mapped WirelessJ74S.RAD.027 AP config with RADIUS Server after AP SSO to standby WLC To verify whether the AP retains the RADIUS server config applied after AP SSO WirelessJ74S.RAD.028 Performing MAC authentication over PPPoE AP with RADIUS servers configured(primary)-virtual controller To verify whether MAC authentication can be performed successfully to the clients associated via the primary RADIUS server over the PPPoE connection with the VLAN mapped Failed CSCue34763 WirelessJ74S.RAD.029 Performing MAC authentication over PPPoE AP with RADIUS servers configured(secondary)-virtual WLC To verify whether MAC authentication can be performed successfully to the clients associated via the secondary RADIUS server over the PPPoE connection with the VLAN mapped Failed CSCue34763 WirelessJ74S.RAD.030 Performing MAC authentication over PPPoE AP with RADIUS servers configured(primary failover)-virtual WLC To verify whether MAC authentication can be performed successfully to the clients associated via the secondary RADIUS server in case of Primary server failure over the PPPoE connection with the VLAN mapped Failed CSCue34763 34 OL-28857-01

New Features WirelessJ74S.RAD.031 Performing Dot1x authentication over PPPoE AP with RADIUS servers configured(primary)-virtual WLC To verify whether Dot1x authentication can be performed successfully to the clients associated via the Primary RADIUS server over the PPPoE connection with the VLAN mapped Failed CSCue34763 WirelessJ74S.RAD.032 Performing Dot1x authentication over PPPoE AP with RADIUS servers configured(secondary)-virtual WLC To verify whether Dot1x authentication can be performed successfully to the clients associated via the secondary RADIUS server over the PPPoE connection with the VLAN mapped Failed CSCue34763 WirelessJ74S.RAD.033 Performing Dot1x authentication over PPPoE AP with RADIUS servers configured(primary failover)-virtual WLC To verify whether Dot1x authentication can be performed successfully to the clients associated via the secondary RADIUS server over the PPPoE connection with the VLAN mapped Failed CSCue34763 WirelessJ74S.RAD.034 Performing Mac-auth+ Dot1x authentication over PPPoE AP with RADIUS servers configured(primary)-virtual WLC To verify whether mac-auth+dot1x authentication can be performed successfully to the clients associated via the Primary RADIUS server over the PPPoE connection with the VLAN mapped Failed CSCue34763 WirelessJ74S.RAD.035 Performing Mac-auth+ Dot1x authentication over PPPoE AP with RADIUS servers configured(primary failover)-virtual WLC To verify whether mac-auth+dot1x authentication can be performed successfully to the clients associated via the Secondary RADIUS server after primary failed over the PPPoE connection with the VLAN mapped Failed CSCue34763 NBAR WirelessJS74NBAR.001 Creating AVC profile in WLC GUI To verify if AVC profile creation is successful using WLC GUI OL-28857-01 35

New Features WirelessJS74NBAR.002 Creating new rules for AVC profiles To verify if new rule has been created successfully for AVC profile WirelessJS74NBAR.003 Controller should not allow the creation of 17th AVC profile To verify if WLC throws an error message if 17th AVC profile has been created WirelessJS74NBAR.004 Controller should not allow the creation of 33rd rule for a AVC profile To verify if WLC throws an error message if 33rd rule for a AVC profile has been created WirelessJS74NBAR.005 Applying same AVC profile to multiple WLAN To verify if same AVC profile can be applied to multiple WLAN WirelessJS74NBAR.006 Application traffic flow from client to AP when AP in local mode and centrally switched FlexConnect- 5508,7500 &2500 WLC To verify the IP traffic flow from client to AP when AP is in local mode and centrally switched FlexConnect WirelessJS74NBAR.008 Apply AVC profile to a SSID and add it to an interface to which ACL is applied and check if ACL works fine To verify if ACL works when added to an interface to which a AVC profile is applied WirelessJS74NBAR.009 Apply an AVC profile with a rule to block an application and check if that application is dropped when tried to open that application To verify AVC rule to drop an application works fine WirelessJS74NBAR.010 Create an AVC profile and apply it to an interface in interface group and if that interface goes down the AVC profile should get applied to another interface in that group To verify if AVC profile works fine with interface groups. WirelessJS74NBAR.011 Associating clients with two WLANs one with AVC profile associated. verify the behavior of traffic classification of both the WLANs To verify the behaviour of AVC profile associated with WLAN id than with non associated WLAN ID WirelessJS74NBAR.012 Create AVC profile, associate clients and check if monitoring page of controller GUI shows the statistics. To verify if monitor page of controller GUI shows proper statistic information 36 OL-28857-01