95 9 enclosure system Probably the fastest enclosure in the world Sample configuration tools required no no tools required Vitaro can be assembled within less than 60 seconds. 00:00 00:0 00:08 00: 00:5 00:9 00:50 9 enclosure system universal enclosure system: 9 enclosure universal enclosure desktop enclosure 95 HP wall-mounting enclosure extremely short assembly time no screws required for assembly due to special fixing system* attractive design light aluminium construction stackable integrated handles assembly kit system requiring minimum storage and transportation space various expansion options modular accessories protection system IP 0 special models available on request *Note: Enclosures can also be assembled using screws. 8
9 enclosure system 95 One basic enclosure, four options Model : 9 enclosure 3// The enclosure has vertical mountings that are inserted without tools and is ready for you to install 9" components. Installation dimensions comply with IEC 97-. Model : universal enclosure We can customise this universal enclosure to your requirements on request, whether you require stamps, embossing or printing. Model 3: desktop enclosure 95 HP, 3// You can also install subracks without tools, creating a desktop enclosure for installing euro board or other customised electronic components. Installation dimensions comply with IEC 97-3. Model : wall-mounting enclosure You can use a wall mounting set (see page 3) to transform enclosure models - 3 into wall-mounting enclosures. 9
95 9 enclosure system Specifications Application: Can be used as a 9" enclosure, desktop enclosure, wall-mounting enclosure or universal enclosure for customised use; ideal for installing 9" components in compliance with IEC 97- resp. 97-3-0. Construction: A shell construction with plug-in tab system; no tools required for assembly. screws can be used for extra security. (included in delivery) Exploded view: basic enclosure 3 Material: Aluminium Finish: Side panels: RAL 7035 light grey Top/bottom panels: RAL 7037 dust grey Protection system: IP 0. Select a basic enclosure from the table based on the height and depth you need.. Select an appropriate expansion kit (see next page) based on the technical use of the enclosure. 3. General and model-specific accessories can be found beginning on page 3. Included in delivery basic enclosure Item 3 Pc. 8 Top/bottom shells Side panels Decorative corners, stackable Assembly set: enclosure feet, handles, retaining screws Basic enclosure Basic enclosure Basic enclosure D=350 mm 9-533-00 9-53-00 9-536-00 D=50 mm 9-53-00 9-5-00 9-56-00 D=550 mm 9-553-00 9-55-00 9-556-00 Note: Avaible depth d=d-6 mm, enclosure width W = 537 mm Additional enclosure sizes (e.g. 8 HP, 63 HP, HP) are available on request. 0
9 enclosure system 95 expansion set 9 enclosures You can transform the basic enclosure into a full 9" enclosure using plug-in vertical mountings. No tools are required. Note: Please order rear panel separately (see below: Accessories 9 enclosures). Included in delivery Expansion set Item Pc. Vertical mounting 9-5053-00 9-505-00 9-5056-00 Accessories 9 enclosures 9 rear panel Sliding rails, adjustable height Screw set M 5 (50-fold) ventilated or solid Finish: RAL 7035 light grey H solid 9-503-00 9-50-00 9-506-00 ventilated 9-503-0 9-50-0 9-506-0 Load capacity: 5 kg/pair for D=350 mm for D=50 mm for D=550 mm (pair) 9-538-00 9-58-00 9-558-00 includes: 50 captive nuts, M5 50 screws, M5 x 50 decorative washers, M5 with collar (set) 630-99 expansion set universal enclosure You can customise our basic enclosure using customisable front and rear panels (screens, stamps, embossing). Note: You can find plug-in installation/ mounting plates for horizontal and vertical installation in the accessories section on page 3. Included in delivery Item Pc. Front panel, plug-in Rear panel, plug-in Expansion set 9-5063-00 9-506-00 9-5066-00
95 9 enclosure system 6 3 5 Accessories desktop enclosure expansion set desktop enclosure 95 HP By use of the Vitaro expansion kit, the enclosure can be easily modified to a desktop enclosure for IEC 97-3 plug-in components using subracks. No tools are required for assembly. Subracks are ideal for installing euro boards with 60 mm or 0 mm depths and BUS boards. Included in delivery Item 3 5 6 Pc. Side panels Standard module rails BUS module rails BUS support rail (for only/without fig.) Rear panel Threaded inserts M,5 Expansion set D=60 mm D=60 mm D=60 mm D=0 mm D=0 mm D=0 mm 9-5083-00 9-508-00 9-5086-00 9-5083-30 9-508-30 9-5086-30 Front panel 95 HP Fan unit HP Card guide (50 pc.) Finish: anodised Material: Aluminium,5 mm Can be customised on request! 9-5395-00 9-595-00 9-5695-00 Contact spring for card guide for front installation with built-in V fans flow rate: x 3.5 m 3 /h noise level: 9dB(A) Finish: anodised Material: Aluminium,5 mm Card lock 9-5083-0 9-508-0 9-5086-0 for 60mm and 0mm deep euro board Finish: similar to RAL 7035 light grey Material: Plastic, flammability tested acc. to UL 9 V-0 For card depth D=60 mm D=0 mm (50 pc.) -00-30 -006-30 creates conductive connection between PCB and module rail for clipping on card guides -00-30 or -006-30 (two contact springs per card guide are needed) (50 pieces) -000-30 secures PCB from slipping out easy snap-on mounting Material: Plastic, flammability tested acc. to UL 9 V-0 ( piece) 50-76
9 enclosure system 95 Door with plexiglass pane, plug-in Swing door with frame general accessories Mounting plate, plug-in with plexiglass pane and cylinder sash fastener demountable without tools Finish: RAL 7035 light grey Earthing set 9-5073-00 9-507-00 9-5076-00 to be screwed onto the enclosure with plexiglass pane and cylinder sash fastener Blind cover set 9-5073- 9-507- 9-5076- for vertical mounting can be inserted at different depths Note: The mounting plate can also be installed horizontally in all enclosure sizes as a shelf. Wall mounting set 9-5063-0 9-506-0 9-5066-0 for earth connection of all enclosure parts in compliance with VDE 9 enclosure Desktop enclosure Universal enclosure Fan support with V fan (set) 9-5080-0 9-5080- 9-5080- for extension components installed 50mm towards the rear horizontal and vertical panels incl. self-locking, no assembly material required 9-5083-0 9-508-0 9-5086-0 Prop-up and carrying handle fits all Vitaro models no tools required for mounting brackets to the enclosure for D=350 mm for D=50 mm for D=550 mm (set) 9-5380-00 9-580-00 9-5580-00 handle can be set in 30 steps by pressing a button to snap it into place plugs into the side wall high-quality -fan flow rate: 0m3/h noise level: 0dB (A) for D=350 mm 9-5380-0 for D=50 mm 9-580-0 for D=550 mm Finish: Handle: RAL 90 graphite black Handle profile: anodised Button, screw blind: plastic, black Carrying capacity: 50 kg 9-5080-30 3