MIC-3001/8. 3U/4U CompactPCI. Enclosure for Rackmounting

Similar documents
MIC-3001/8. 3U/4U CompactPCI Enclosure for Rack Mounting. User Manual

MIC Advantech CompactPCI. Modular Industrial Computer. 10U high 8-slot enclosure with CT bus and rear I/O for CompactPCI backplane

MIC-3002A Series. 3U 6-slot CompactPCI Enclosures with Rear I/O and 6" LCD. User Manual

FWA-6280A User Manual 1. FWA-6280A User Manual

User Manual AIMB-C200. Economical Embedded Chassis for Mini-ITX Motherboard

User Manual IPC U Industrial Rackmount Chassis for SHB and SBC

EDG Port Industrial 10/100 Mbps Ethernet Switch. User Manual

PCM PC/ bit Digital I/O Module. User Manual

User Manual MIOe port CAN-bus PCIE/MIOe Module with Isolation Protection

PCLD-8751 PCLD User Manual

User Manual ARK-6610/6620. Compact Mini-ITX Chassis

User Manual PCM Port CAN-Bus Mini PCIe Module with Isolation Protection

User Manual EBPC Embedded Industrial Computer Chassis for 3.5 Biscuit SBCs

User Manual IPC-510-B/C. 4U Rackmount Chassis for General Applications

AMAX-2750SY Series. 32-ch AMONet RS-485 Isolated Digital I/O Slave Modules. User Manual

PCLD-8751/8761/ Channel Isolated D/I and Relay Board. User Manual

SATA II HDD Canister KISS DA 435 Quick Reference Guide

User Manual IPC Desktop/Wallmount Chassis for MicroATX Motherboard with PS/ 2 Power Supply

3-4 SAS/SATA II HDD Canister Entry version USER S MANUAL XC-34D1-SA10-0-R. Document number: MAN A

IPC-611 Series 4U Rackmount Industrial Chassis User Manual

User Manual IDS-3206 Series. 6.5" Industrial Panel Mount Monitor

User Manual ACP U Rackmount Chassis for ATX / MicroATX Motherboard or SHB / SBC

User Manual EKI-6528TI/ 6528TPI. EN port M12 Unmanaged/ PoE Switch with Wide Temperature

USB Channel Isolated Digital I/O USB Module. User Manual

user manual AMOS-2000 Universal Compact, Chassis System, Supporting Nano-ITX Embedded Boards Revision

User Manual IDS-3106 Series. 6.5" Industrial Open Frame Monitor

ADAM-5511 Quick Start

EKI-2528PAI 8-port Industrial Unmanaged Ethernet Switch with 4-port PoE. User Manual

User Manual PCL channel Isolated Digital Output Card

User Manual ADAM-6100EI Series. EtherNet/IP I/O Modules

LCM-100 LCD Module User s Manual

User Manual MIC U CompactPCI Chassis with 3U 32-bit backplane

PCI-1753 PCI-1753E. User Manual

User Manual VEGA K HEVC/H.265 Real-time PCIe Encoder Card

User Manual TPC-8100TR. 10.4" EN50155 Railway Panel Computer

User Manual IDS-3119 Series. 19" Industrial Open Frame Monitor

EKI-7526I 16 Port Unmanaged Industrial Ethernet Switch. User Manual

FPM-5151G/5171G/ 5191G Series

SAS JBOD Installation Reference Guide Revision 1.0

User Manual ECU-P1524PE HSR/PRP Module

EMC1600 Series Media Converter and Ethernet Extender Chassis

Owner s s Manual. SATA A II Aluminum Hot-Swap Systems. Macintosh, Windows, Linux 2 BAY 4 BAY 4 BAY. Rack 8 BAY. Rack

RPC-600/610. Industrial Chassis USER' Manual

EKI-7529MI, EKI-7529MI/ST FX Port Unmanaged Industrial Ethernet Switch. User Manual

OV-MCR116. Media Converter Chassis System. User s Manual

USB ks/s, 12-bit, USB Multifunction Module. User Manual

DMC-1000 Chassis-Based Media Converter

User Manual IDS-3217 Series. 17" Industrial Panel Mount Monitor

User Manual. FPM-7181W Series. 18.5" Industrial Monitor with Projected Capacitive Touchscreen, Direct-VGA and DVI Ports

FWA Advantech. Internet Security Platform. Rackmount Internet Security Platform with 8 Front LAN Ports/ PCI Expansion Slot/ LCD Display

D-Storm Series. High-end Rackmount case. Installation and User Guide. Copyright 2004 istarusa, Inc.

user manual AMOS-1000 Universal Compact Chassis System, Supporting Mini-ITX Embedded Boards Revision

User Manual ACP-2320MB. 2U-high Rackmount Chassis with Dual SAS/SATA HDD Trays

1 LIMITED WARRANTY STORCASE TECHNOLOGY, Incorporated ( StorCase ) warrants that its products will be free from defects in material and workmanship, su

User Manual PCIE ch Digital I/O PCI Express Card

User Manual EKI-2728I. 8-port Industrial Unmanaged Gigabit Ethernet Switch

User Manual PCL ch Isolated Digital I/O ISA Cards

CHASSIS INSTALLATION GUIDE

User Manual PPC-IPS. Intelligent Power System for PCs

64 Bays SAS to SAS/SATA JBOD Subsystem. User Manual. Revision 1.0

actilib Library 2U Quick Start Guide

RACK-220 CHASSIS USER S MANUAL

IFS MCR-R15 Media Converter Rack User Manual

HOME THEATER PC CHASSIS. Model: HTPC 7000B. HTPC Chassis Quick Installation Guide

USER S GUIDE LDLC US GOLD POWER SUPPLY MODULAR UNIT ATX12V FORMAT LDLC US-550G / LDLC US-650G / LDLC US-750G / LDLC US-850G / LDLC US-1000G

Rocsecure NE52 NAS System

PSA200 User s Manual

ClearCube F6151 Media Converter Chassis System with 10/100BaseTX to 100BaseFX Converter

19 Rackmount Cases A3211. Enrich Your Product Line and Build Your Brand Awareness

MPP1700 User s Manual

ix-g25 GPS Photo Locator SD Card Type User Manual

PS8 - II. Professional Power Sequencer. User s Manual

User Manual MIC-3955/3527 Series. 3U CPCI 4/8 Port RS-232/422/485 Communication Card

Hard Drive user manual

CSR-G6300 6U Rack Chassis. CSR-G3300 3U Rack Chassis. Operation Manual

User Manual PPC Intel ATOM N2600 processor based microcomputer, with 15" color TFT LCD display

16-SLOT IN-BAND MANAGEMENT CHASSIS

Owner s s Manual. SATA A II LCD Hot-Swap Systems. Macintosh, Windows, Linux EXTERNAL SYSTEM INTERNAL 5.25 SYSTEM DUAL EXTERNAL SYSTEM

Hard Drive user manual

Installing the Cisco SFS 3504 Server Switch

4170 POS System Installation Guide

SAS to SAS/SATA JBOD Subsystem. User Manual. Revision 1.2

User Manual ITM-5117 Series. 17" Industrial LED Touch Monitor

User Manual IDS-3118W Series. 18.5" Industrial Open Frame Monitor

MPF-1, Mains Power Filter User Manual

User Manual ACP U Industrial Chassis with Dual Front-accessible SAS/SATA HDD Trays

User Manual. IDS-3215 Series. 15" Industrial Panel Mount Monitor

Two Channel 48 Volt Phantom Power Supply. Artcessories. User's Manual

User Manual DSD-5028 Series. 28" Industrial Stretched Signage Display Monitor

User Manual PCM-27D24DI. 24-ch Isolated Digital I/O and 2-ch Counter PCI Express Mini Card

MPP200 User s Manual

Omnitron Systems Technology, Inc. 1. iconverter. 19-Module Managed Power Chassis User s Manual

For technical support and service, please visit our support website at:

Chenbro. ES34169 Chassis User s Manual. April / 2 /

Trademarks All trademarks are the property of their respective holders.

Rack Power Distribution Unit AP7530, AP7540

UNO-2053GL. LX MHz Automation Computer with 2 x LAN, 2 x USB, 2 x RS-232, Audio. User Manual

RM12_1394B. User Manual. Ver Date: 02/2006.

For Removable Docking Modules with 3.5"/2.5" HDD. or Optional for zip /SuperDisk LS-120/MO/TR-4 Tape or ATA Flash Memory Reader

SATA Hard Drive Backplane

Transcription:

MIC-3001/8 3U/4U CompactPCI Enclosure for Rackmounting

Copyright Notice This document is copyrighted, 1999. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assumes no responsibility for its use, nor for any infringements upon the rights of third parties which may result from its use. Acknowledgements PICMG, CompactPCI and the PICMG, CompactPCI logos are trademarks of the PCI Industrial Computers Manufacturers Group All other product names or trademarks are properties of their respective owners. Part No. 2003300100 1st Edition Printed in Taiwan May 1999 MIC-3001/8 User's Manual

Product warranty Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for one year from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events. Because of Advantech s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details. If you think you have a defective product, follow these steps: 1. Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs. 2. Call your dealer and describe the problem. Please have your manual, product, and any helpful information readily available. 3. If your product is diagnosed as defective, obtain an RMA (return merchandize authorization) number from your dealer. This allows us to process your return more quickly. 4. Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for warranty service. 5. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. Preface and Table of Contents

Packing List Before installing your board, ensure that the following materials have been received: 1 MIC-3001/8 Compact PCI enclosure with backplane 1 box of accessories 1 warranty certificate This user's manual If any of these items are missing or damaged, contact your distributor or sales representative immediately. Technical Support and Sales Assistance If you have any technical questions about the MIC-3001/8 or any other Advantech products, please visit our support website at: http://support.advantech.com.tw For more information about Advantech's products and sales information, please visit: http://www.advantech.com MIC-3001/8 User's Manual

Contents Chapter 1: General Information... 1 1.1 Introduction... 2 1.2 Features... 3 1.3 Specifications... 3 1.3.1 General... 3 1.3.2 Fan Tray Module... 4 1.3.3 ATX Power Supply... 4 1.4 Dimensions... 5 Chapter 2: Installation... 7 2.1 Initial inspection... 8 2.2 The MIC-3001/8 Chassis... 9 2.3 Installation Procedures... 11 2.3.1 Card Installation and Removal... 11 2.3.2 Before Operating the System... 12 2.3.3 Installing Peripherals... 13 2.3.4 Replacing the Fan Tray and Air Filter... 13 Preface and Table of Contents

Figures Figure 1-1: MIC-3001/8 dimensions... 5 Figure 2-1: Front view of MIC-3001/8... 9 Figure 2-2: Rear view of MIC-3001/8... 10 Figure 2-3: Attaching mounting brackets to a half-height device for mounting in device space next to the fan tray module... 13 MIC-3001/8 User's Manual

CHAPTER 1 General Information Chapter 1 General Information 1

1.1 Introduction The MIC-3001/8 is an 8-slot 3U/4U-sized CompactPCI enclosure for rack or panel mounting. Its rugged construction and flexible modular design allows users to configure it to meet the requirements of individual applications. The MIC-3001/8 comes in two versions: 3U high without a fan tray or 4U high with a fan tray. The 1U high fan module provides forced air cooling in the system. Two 88-CFM high-speed fans are mounted in a hot-swappable tray directly underneath the card slots. The fan's tachometer output enables the alarm module to monitor the speed of the fans. Tachometer signals are transmitted to the system through a 6-pin connector on the fan backplane. A protective circuit has been designed into the fan backplane to reduce electrical spikes and noise while hot swapping. This design allows users to replace fans safely without turning the system off. 2 MIC-3001/8 User's Manual

1.2 Features Eight 3U CompactPCI slots Easy rackmount or panelmount installation Accepts an ATX power supply, or two optional CompactPCI plug-in power modules Hot-swappable fan tray Optional fault detection and alarm module 1.3 Specifications 1.3.1 General Construction: Aluminum frame and galvanized sheet steel 21-slot space (84 TE), incl. 7 CompactPCI slots and one system slot. "Hot swappable platform complies with PICMG 2.1 R 1.0 Hot Swap Specification Dimensions (W x H x D, mounting flanges not included): 4U: 440 x 178 x 240 mm (17.3" x 7" x 10") 3U: 440 x 133 x 240 mm (17.3" x 5.25" x 10") Weight: 7 kg Operating temperature: 0 ~ 50 C (32 ~ 122 F) Storage temperature: -20 C ~ 70 C (-4 ~ 158 F) Relative humidity: 10 ~ 95% @ 40 C, non-condensing Operating altitude: 0 to 10,000 feet (3048 meters) Chapter 1 General Information 3

Storage/transit altitude: 0 to 40,000 feet (12,190 meters) Shock: 10 G (operating); 30 G (storage/transit) Random vibration:1 Grms (operating) 1.3.2 Fan Tray Module Air flow: Two 88-CFM fans, providing 176 CFM in total Power Consumption: 0.37 A @ 12 V per fan, 0.74 A total Rated fan speed: 2200 rpm Life expectancy: 50,000 hours @ 25 C 1.3.3 ATX Power Supply Input: 90 ~ 135 or 180 ~ 265 V AC @ 47 ~ 63 Hz, switchable Output: +3.3 V @ 15 A, +5 V @ 26 A, +12 V @ 9 A, -12 V @ 0.8 A Minumum load: +3.3 V @ 0.3 A, + 5V @ 2 A, +12 V @ 1 A Max output: 250 W total, 170 W for 5 V and 3.3 V MTBF: 50,000 hours @ 70% load Safety: UL/CUL/CE 4 MIC-3001/8 User's Manual

1.4 Dimensions Figure 1-1: MIC-3001/8 dimensions Chapter 1 General Information 5

6 MIC-3001/8 User's Manual

CHAPTER 2 Installation Chapter 2 Installation 7

2.1 Initial inspection We have carefully inspected the MIC-3001/8 mechanically and electrically before shipping. It should be free of marks and scratches and in perfect working order upon receipt. As you unpack the MIC-3001/8, check it for signs of shipping damage (damaged box, scratches, dents, etc.). If it is damaged or if it fails to meet specifications, notify our service department or your local representative immediately. Also notify the carrier. Retain the shipping carton and packing material for inspection by the carrier. After inspection we will make arrangements to repair or replace the unit. Warning! We strongly recommend that only qualified, experienced personnel install or remove components and that they practice extreme caution when doing so. 8 MIC-3001/8 User's Manual

2.2 The MIC-3001/8 Chassis The MIC-3001/8 is designed to be installed and maitained easily. The following illustrations show the components on the front and rear side of the enclosure. System Slot Power on/off switch Fan tray Device bay Figure 2-1: Front view of MIC-3001/8 Chapter 2 Installation 9

Power Supply Switch Figure 2-2: Rear view of MIC-3001/8 10 MIC-3001/8 User's Manual

2.3 Installation Procedures 2.3.1 Card Installation and Removal The CompactPCI connectors are firm and rigid, and require careful handling while plugging and unplugging. Improper installation of a card can easily damage the backplane of the chassis. The CPU card can be installed only in the system slot. The CompactPCI specification allows the system slot to be at any position in the backplane. Do not insert the CPU card into any other slot, or insert a peripheral card into the system slot. The MIC-3001/8 may accept different backplanes, thus the location of the system slot may vary. The system slot is marked by a triangle enclosing the slot number. Please refer to the backplane user's manual. The inject/eject handles on CompactPCI cards help you to install and remove the cards easily and safely. Follow the procedures below to install a card into a chassis: To install a card: 1. Hold the card vertically. Be sure that the card is pointing in the correct direction. The components of the card should be pointing to the right-hand side. 2. Be sure that the handles of the card are not latched. Release the handles if they are latched. Handles from different vendors may have different latch designs. Caution: Keep your fingers away from the latch hinges to prevent your fingers from getting pinched. 3. Insert the card into the chassis by sliding the upper and lower edges of the card into the card guides. 4. Push the card into the slot gently by sliding the card along the card guide until the handles meet the rectangular holes of the cross rails. Chapter 2 Installation 11

Note: If the card is correctly positioned and has been slid all the way into the chassis, the handles should match the rectangular holes. If not, remove the card from the card guide and repeat step 3 again. Do not try to install a card by forcing it into the chassis. 5. Lift the lower handle up to push the card into place. 6. Secure the card by locking the handles in place. To remove a card: 1. Unscrew the screws on the card front panel. Release the locking latches on the handles. 2. Press the lower handle down to release the card from the backplane. 3. Slide the card out. 2.3.2 Before Operating the System Before operating your system, first check your power supply source. Adjust the switch on the power supply to the correct voltage. Two mounting flanges are included for users who would like to install the MIC-3001/8 on a 19" rack or on a panel. These flanges can be installed on the front side for rack mounting or on the rear side for panel mounting. Four rubber stands can be attached to the bottom of the chassis for desktop operation. They are not required for rack operation. There are ventilation holes on the top and bottom of the chassis for cooling. We advise you not to block these holes when installing the chassis on a rack or placing it on a desktop. 12 MIC-3001/8 User's Manual

2.3.3 Installing Peripherals The device bay next to the fan tray module accepts one 5.25" device. One pair of mounting brackets will be packaged in the accessory box. Users can install a CD-ROM, a FDD, or a HDD in the space. Since the mounting brackets are not guided, we recommend that users install only a half-height device such as a CD-ROM. When mounting 3.5" devices, extension brackets are required. These extension brackets are available in PC stores, or users may contact Advantech distributor to order them. Figure 2-3: Attaching mounting brackets to a half-height device for mounting in device space next to the fan tray module 2.3.4 Replacing the Fan Tray and Air Filter The fan tray module of MIC-3001/8 is designed to be "hot-swappable", i.e., users can remove and install the fan tray without turning off the system power. Follow the steps below to replace a fan tray: 1. Unfasten the fan tray. 2. Slide the fan tray out. 3. Insert a new fan tray. 4. Fasten the new fan tray. Chapter 2 Installation 13

The air filter can become dirty after a period of use. Follow the steps below to replace a filter: 1. Remove the filter cover. 2. Replace the dirty filter by a clean one. 3. Reattach the filter cover. Repeat steps 1 to 3 to replace the other filter. 14 MIC-3001/8 User's Manual