Digital I/O Units Compatible with MULTIPLE I/O TERMINAL

Similar documents
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

Slim Relay G2RV. Model Number Structure. Model Number Legend. The World's First Industrial Slim Relay NTLP: WAITING FOR @

onlinecomponents.com

Wiring Systems I/O Blocks, I/O Terminals, and I/O Block Bases

SYSMAC Remote Transistor Module

Visualize the actual worksite status! Simple and Intelligent I/O Slave Units.

Inductive Proximity Sensor

SmartSlice I/O Plug-and-Play I/O. System Configuration

SRT2-ROC08, SRT2-ROC16

Link Master Adapter. Ordering Information. Connect High-Density I/O PLC Modules to 16-Point B7A Modules

Transistor I/O Link Modules

EtherCAT Remote I/O Terminal GX series

Model Number Structure

Sensing method Appearance Connection method Sensing distance Part number NPN output PNP output Through-beam Prewired (2 m) E3Z-T61A E3Z-T81A 10 m

Note: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.

NX integrated safety System configuration. Integrated safety into machine automation

Type Terminal Block Connector No. of poles Appearance Model 40 XW2B-40G4 50 XW2B-50G4 40 XW2B-40G5 *1 50 XW2B-50G5 60 XW2B-60G5 40 XW2B-40G5-T

Product Discontinuation Notices. Discontinuation Notice of Compact proximity sensor TL-M series (for china area only)

Model Number Structure

G3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend

Type Terminal Block Connector No. of poles Appearance Model 40 XW2B-40G4 50 XW2B-50G4. 40 XW2B-40G5 Flat Cable Connectors

Photoelectric Sensors E3F2

P7TF-IS16/OS16/OS08. I/O classification I/O points Internal I/O common Rated voltage Model 12 VDC P7TF-IS16 DC12 24 VDC P7TF-IS16 DC24 For inputs

Product Appearance Model Specifications Standards Master CVM1-DRM21-V1 For CVM1/CV Series U, C, CE. PC Card (provided with software

masterelectronics.com onlinecomponents.com

E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.

Installation Sensing distance Connection Output configuration Operation mode NO Operation mode NC

SmartSlice. System Configuration

Ferrous metal (The sensing distance decreases with non-ferrous metal.) Power supply voltage (operating voltage range)

Cylindrical Proximity Sensor

Thread length (overall length) material

Combine Relays and P7TF Block Bases to match your application requirements. Use the table below to configure Relay Blocks.

NX safety control System configuration. Integrated safety into machine automation

2. Actuator B: Ball type P: Pin type F: Flat type

DPST-NO None 2 channels Auto-reset Inverse (+/-) 24 VAC/VDC 4 G9SB-2002-A 1 channel or 2

NO: PH-185 PRODUCT: E3JK Photoelectric Sensors DATE: May 2014 TYPE: Discontinuation Notice

Industrial Control Relays Relays and terminal module RS type

RM17TG. Main. Product or component type. Product specific application. Relay monitored parameters. Switching capacity in VA

Light ON 5m. * Light ON. 2.5m (3m) Light ON. (5m)

Inductive Proximity Sensor

Basic Switch. Pin plunger Short hinge Hinge lever Long hinge lever Simulated hinge Short hinge Hinge roller lever lever roller lever lever

E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.

VEO. V2PF480Y/277VSY01 Art.Nr.: V2PF480Y/277VSY01P Art.Nr.: TECHNICAL DATA

G3NE. Ordering Information. Solid State Relay. Compact, Low-cost, SSR Switching 5to20A J ACCESSORIES (ORDER SEPARATELY) Solid State Relay G3NE

Programmable Relay ZEN V2 Units

Oil-resistive, Long-range Photoelectric Sensor with Metal Housing

Appendix 3 Using NS-AL002 Converters

I/O delay. (0.32 in ±0.06 in)

Solid State Relays with Failure Detection Function

Time Counters mini "h", DC Version

4 mm. 8 mm. Proximity Sensor. Sensing head Sensing distance Output configuration Part Number M18 Shielded 4 mm DC 3-wire PNP-NO E2EZ-X4B1 M30

Ordering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel

Switching Power Supply

E2A. Ordering Information. Cylindrical Proximity Sensor. Safe Mounting with Greater Sensing Distance. E2A Cylindrical Proximity Sensor 1

Setting method Indication Control Output Model method mode Thermocouple (with sensor burnout detection circuit)

Contact form. Operating Force. SPDT 100g Unsealed Solder / 187 Quick Connect. SPDT 200g Unsealed Solder / 187 Quick Connect

A16. Separate Construction with Cylindrical 16-dia. Body. Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.

OMRON ASIA PACIFIC PTE. LTD.

Switching Power Supply S82J. Ordering Information. Open-Frame, Covered-Frame, or Enclosed-Frame Type with Capacity Up to 600 W

Plastic Cylindrical Inductive Prox

E2K-X4ME1 2M E2K-X4ME2 2M

Conforms to VDE0435/2021 C/250, VDE0110, VDE0106/P100 Conforms to EN , pren

Ordering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel

Power and Expansion Selection

Ultra-small U-shaped Micro Photoelectric Sensor. Extremely small size enables space saving!! 12 mm in

NPN output PNP output Cord connection Cord length: 2 m Through-beam 7 m Light-ON. 2 m. (selectable by wiring) Diffuse reflective 0.

PM-24 SERIES. Ultra-small U-shaped Micro Photoelectric Sensor. Extremely small size enables space saving!! ( ) Equipped with two independent outputs

E4PA-N. Application Examples. Features. Ultrasonic Displacement Sensor. Now, more advanced with a new mutual interference prevention function.

Safety Relay Unit (I/O Unit Type)

E2KQ-X. Fluororesin-coated Capacitive Sensor with Sensitivity Adjuster. Chemical-resistant Proximity Sensor. Ordering Information

RE48ATM12MW on-delay timing relay s..300 h V AC - 2 OC

(Applicable output load) to 264 (see note 2) (see note 1) (2Aat75to264VAC) G3R-202SLN-US PCB Yes 2 A at 100 to 120 VDC. (2 A at 75 to 132 VDC)

BGS (at min. setting) BGS (at max. setting)

RM35UB3. Product data sheet Characteristics. voltage control relay RM35-U - range V AC. Main. Complementary

Zelio Control-modular measurement and control relays 1

PRCMT18-5DO PRCMT18-5DC PRCMT18-5DO-I PRCMT18-5DC-I

Connector Built-in U-shaped Micro Photoelectric Sensor. Approximately 60 % of previous model Detachable

RM35TF V AC

RE22R1QMQ star-delta timing relay - 230VAC/440VAC - 1 C/O

RM17UAS. Product datasheet Characteristics. voltage control relay RM17-U - range V DC. Main. Complementary. Price* : 70.

RE17LAMW on-delay timing relay - 1 s..100 h V AC/DC - solid state output

RM17TG. Main. Product or component type. Product specific application. Relay monitored parameters. Switching capacity in VA 250 V AC

Digital I/O Terminal 2-tier Terminal Block Type

Page Housing Plastic Metal Mounting DIN Rail or surface mount Panel or bracket mount Wattage Range 10W to 240W 7.5W to 240W 10W to 300W

RM17UB3. Product data sheet Characteristics. voltage control relay RM17-U - range V AC. Main. Complementary

Model Number Structure

Absolute Rotary Encoder E6C-N. Ordering Information. Ideal for Stepping Motor Tripping Detection and Position Control of Loaders or Unloaders

SSI-1016H Specifications and Operation Manual

RUC industrial relays of small dimensions

Appearance Size (mm) Power supply voltage Model (W H D) 100 to 240 VAC K3SC to 240 VAC

Chemical Resistant Inductive Prox

E4PA. Ultrasonic Displacement Sensor. Ordering Information

MODEL: CND. Multiplex Transmission System

Multiple-Rotation Absolute Encoder

Safety Monitoring Relays

RM22TG. Product data sheet Characteristics. three-phase control relay Vac, 2 C/O. Main. Complementary. Network number of phases

Round Water-resistant Connectors (M8) XS3

PROGRAMMABLE CONTROLLER. FP0 A/D Converter Unit. Technical Manual ARCT1F321E

RE17LAMW on-delay timing relay - 1 s..100 h V AC/ DC - solid state output

BMX DDM Mixed Relay Input/Output module

Transcription:

Digital I/O Units T-@D(-)/@DMX(-)/@DML(-)/@DML(-)/@DDS(-) Digital I/O Units Compatible with MULTIPLE I/O TERMAL Terminal block, connector, and high-density connector models are available. The circuit block of the terminal block model can be mounted or dismounted for ease of maintenance without disconnecting the wires. D track mounting. Ordering Information Unit I/O classification Internal I/O common I/O points I/O connections Power supply voltage I/O specification Model Terminal block model M terminal board T-ID T-ID- T-OD T-OD- Connector model Molex connector Fujitsu connector DC T-IDMX T-IDMX- T-ODMX T-ODMX- T-IDML T-IDML- T-ODML T-ODML- D-sub -pin connector T-IDDS T-IDDS- T-ODDS T-ODDS- High-density connector model Fujitsu connector T-IDML T-IDML- T-ODML T-ODML- Digital I/O Units T-@D(-)/@DMX(-)/@DML(-)/@DML(-)/@D

eneral Specifications Input Specifications voltage. to. DC ( DC -%/+%) Model I/O Interface Internal circuit T-ID(-) ma max. -- T-OD(-) ma max. ma max. T-IDMX(-) ma max. -- T-ODMX(-) ma max. ma max. Current consumption * T-IDML(-) ma max. -- T-ODML(-) ma max. ma max. T-IDDS(-) ma max. -- T-ODDS(-) ma max. ma max. T-IDML(-) ma max. -- T-ODML(-) ma max. ma max. Dielectric strength AC Noise immunity Conforms to IEC-- k (power line) ibration resistance to 0 Hz,.0-mm double amplitude or 0 m/s Shock resistance m/s Mounting method D mm-track mounting Mounting strength No damage when 0 N pull load was applied in all directions ( N min. in the D track direction) Terminal strength Screw tightening torque Ambient operating temperature Ambient operating humidity Ambient storage temperature Accessories No damage when 0 N pull load was applied 0. to 0. N m - C to C (with no icing or condensation) % to % (with no icing or condensation) - C to C I/O Unit Connecting Cable (0 mm) * The above current consumption is a value with all and points turned ON excluding the current consumption of the external sensor connected to the Input Unit and the current consumption of the load connected to the Output Unit. Item Model T-ID@@ ON delay OFF delay ON voltage OFF voltage OFF current Insulation method Input indicators. ms max.. ms max. min. (between each input terminal and or ) max. (between each input terminal and or ) ma max. Photocoupler LED (yellow) Output Specifications Item Model T-OD@@ Rated output current ON delay OFF delay Residual voltage Leakage current Insulation method Output indicators * Ensure that the total external load current does not exceed the values given in the following table. Model 0. A/point * 0. ms max..0 ms max.. max. T-OD/MX/ML(-) T-ODML/DS(-) 0. ma max. Photocoupler LED (yellow) Total external load current A. A Applicable Connectors Type Model Remarks Housing 0-0 Molex connector Fujitsu connector ( points) Fujitsu connector ( points) OMRON D-sub Connector Chain - Corresponding to to 0 AW terminal -0 Corresponding to to AW Solderless terminal Loose - Corresponding to to 0 AW terminal - Corresponding to to AW -0 Corresponding to to AW Press-fit tool -0 Corresponding to to 0 AW Solder terminal FCNJ-AU Press-fit terminal FCNJ-AU/F Solderless terminal FCNJ-AU Solder terminal FCNJ0-AU Press-fit terminal FCNJ0-AU/F Solderless terminal FCNJ0-AU Plug XMA- Hood XMS- #-0U inch screws Cables with High-density Connectors (Fujitsu-compatible Connectors) I/O classification ( points) ( points) ( points) ( points) Note: Refer to page for ordering information. Model XWZ-@@@A -@C XWZ-@@@A -@C XWZ-@@@B -I@C@ XWZ-@@@B -O@C-@ Digital I/O Units T-@D(-)/@DMX(-)/@DML(-)/@DML(-)/@D

Cables for I/O Connector Cables for Connector Terminal Conversion Units ( Points) ( points) Cables for Connector Terminal Conversion Units ( Points) Cables for I/O Blocks ( Points) Cables for I/O Blocks ( Points) T-IDML(-) Note: For details of applicable cables and connectors, refer to pages to. XWZ-@@@A XWD- XWE-- Slim-type Connector Terminal Conversion Unit Common terminal (-tier input type) ( points) T-ODML(-) XWD- Slim-type Connector Terminal Conversion Unit ( points) ( points) T-IDML(-) T-ODML(-) XWZ-@@@B XWD- Slim-type Connector Terminal Conversion Unit ( points) ( points) ( points) ( points) T-IDML T-IDML- T-ODML T-ODML- -@C TC-ID TC-I TC-ID- TC-I- TC-OC TC-OC 0D-SOC 0D-FOM 0D-SOC 0D-FOM 0A-ZOC- ME Series MF-@N@@@ TC-OC- 0D-SOC- 0A-ZOC- ME-MB@-@@ MF-@P@@@ For I/O Block input Digital Display Unit Digital Display Unit ( points) ( points) ( points) ( points) T-IDML T-IDML- T-ODML T-ODML- -I@C-@ -O@C-@ TC-ID TC-I TC-ID- TC-I- TC-OC TC-OC 0D-SOC 0D-FOM 0D-SOC 0D-FOM 0A-ZOC- TC-OC- 0D-SOC- 0D-FOM- 0A-ZOC- For I/O Block input For I/O Block input 0 Digital I/O Units T-@D(-)/@DMX(-)/@DML(-)/@DML(-)/@D

Dimensions (Unit: mm) Terminal Block Model T-ID T-ID- T-OD T-OD-.. max.. 0 max. 0 max. (.) Connector Model T-IDMX T-IDMX- T-ODMX T-ODMX-.. max.. max. 0 max. (.) Connector Model T-IDML T-IDML- T-ODML T-ODML-. 0... 0 () () Connector Model T-IDDS T-IDDS- T-ODDS T-ODDS-. 0.. 0. () () High-density Connector Model T-IDML T-IDML- T-ODML T-ODML-.. max.. max. 0 max. (.) Digital I/O Units T-@D(-)/@DMX(-)/@DML(-)/@DML(-)/@D

Wiring Diagrams T-ID T-ID- DC 0 DC 0 T-OD Three-wire sensor Two-wire sensor with output (Limit switch, etc.) (e.g., photoelectric sensor Three-wire sensor with output (e.g., photoelectric sensor T-OD- Three-wire sensor with output Two-wire sensor Three-wire sensor with (Limit switch, etc.) output DC 0 DC 0 T-IDMX T-IDMX- Contact 0 Contact 0 Contact Contact DC DC Three-wire sensor with Two-wire sensor output (Limit switch, etc.) Three-wire sensor with Two-wire sensor output (Limit switch, etc.) T-ODMX T-ODMX- Contact 0 Contact 0 Contact Contact DC DC Digital I/O Units T-@D(-)/@DMX(-)/@DML(-)/@DML(-)/@D

T-IDML T-IDML- A A A A A A A A A A A A A A DC DC B B B B B B B B B B T-ODML T-ODML- A A A A A A A A A A A A A A DC DC B B B B B B B B B B Digital I/O Units T-@D(-)/@DMX(-)/@DML(-)/@DML(-)/@D

Digital I/O Units T-@D(-)/@DMX(-)/@DML(-)/@DML(-)/@D T-IDDS T-IDML T-IDDS- T-IDML- T-ODDS T-ODML T-ODDS- T-ODML- DC A A A A A A A A A A A A A A B B B B B B B B B B B B + DC DC A A A A A A A A A A A A A A B B B B B B B B B B B B + DC DC A A A A A A A A A A A A A A B B B B B B B B B B B B + DC DC A A A A A A A A A A A A A A B B B B B B B B B B B B + DC