Farklı Arduino Boardlar

Farklı Arduino Boardlar

Arduino UNO R3 Microcontroller ATmega328P (8 bit) DataSheet http://ww1.microchip.com/downloads/en/devicedoc/atmel- 42735-8-bit-AVR-Microcontroller-ATmega328-328P_Datasheet.pdf Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limit) 6-20V Digital I/O Pins PWM Digital I/O Pins 6 Analog Input Pins 6 DC Current per I/O Pin DC Current for 3.3V Pin Flash Memory SRAM EEPROM Clock Speed LED_BUILTIN 13 Length Width Weight 14 (of which 6 provide PWM output) 20 ma 50 ma 32 KB (ATmega328P) of which 0.5 KB used by bootloader 2 KB (ATmega328P) 1 KB (ATmega328P) 16 MHz 68.6 mm 53.4 mm 25 g

Arduino Mega 2560 Rev 3 DataSheet http://ww1.microchip.com/downloads/en/devicedoc/atmel-2549-8- bit-avr-microcontroller-atmega640-1280-1281-2560- 2561_datasheet.pdf Microcontroller Operating Voltage Input Voltage (recommended) ATmega2560 (8bit) 5V 7-12V Input Voltage (limit) 6-20V Digital I/O Pins Analog Input Pins 16 DC Current per I/O Pin DC Current for 3.3V Pin Flash Memory SRAM EEPROM Clock Speed 54 (of which 15 provide PWM output) 20 ma 50 ma 256 KB of which 8 KB used by bootloader 8 KB 4 KB LED_BUILTIN 13 Length Width Weight 16 MHz 101.52 mm 53.3 mm 37 g

Arduino Due Microcontroller Operating Voltage 3.3V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-16V Digital I/O Pins Analog Input Pins 12 Analog Output Pins Total DC Output Current on all I/O lines DC Current for 3.3V Pin DC Current for 5V Pin Flash Memory SRAM Clock Speed Length Width Weight AT91SAM3X8E (32 bit ARM based) 54 (of which 12 provide PWM output) 2 (DAC) (True Analog Olutput) 130 ma 800 ma 800 ma 512 KB all available for the user applications 96 KB (two banks: 64KB and 32KB) 84 MHz 101.52 mm 53.3 mm 36 g

Arduino Zero Microcontroller ATSAMD21G18, 32-Bit ARM Cortex M0+ (32 bit) Real-time Debugging Operating Voltage 3.3V Digital I/O Pins 20 PWM Pins All but pins 2 and 7 UART Analog Input Pins Analog Output Pins 2 (Native and Programming) 6, 12-bit ADC channels 1, 10-bit DAC (True Analog) External Interrupts All pins except pin 4 DC Current per I/O Pin Flash Memory SRAM EEPROM 7 ma 256 KB 32 KB None. See documentation LED_BUILTIN 13 Clock Speed 48 MHz Lenght 68 mm Width 30 mm Weight 12 gr.

Arduino 101 Microcontroller Intel Curie (x86 based Quark) Operating Voltage 3.3V (5V tolerant I/O) Input Voltage (recommended) 7-12V Input Voltage (limit) 7-17V Digital I/O Pins 14 (of which 4 provide PWM output) PWM Digital I/O Pins 4 Analog Input Pins 6 DC Current per I/O Pin Flash Memory SRAM Clock Speed 20 ma 196 kb 24 kb 32MHz LED_BUILTIN 13 Features Length Width Weight Bluetooth LE, 6-axis accelerometer/gyro 68.6 mm 53.4 mm 34 gr.

Arduino Pro Mini Microcontroller ATmega328 * Board Power Supply Circuit Operating Voltage Digital I/O Pins 14 PWM Pins 6 UART 1 SPI 1 I2C 1 Analog Input Pins 6 External Interrupts 2 DC Current per I/O Pin Flash Memory 3.35-12 V (3.3V model) or 5-12 V (5V model) 3.3V or 5V (depending on model) 40 ma SRAM 2 KB * EEPROM 1 KB * Clock Speed 32KB of which 2 KB used by bootloader * 8 MHz (3.3V versions) or 16 MHz (5V versions)

Arduino LilyPad Microcontroller Operating Voltage Input Voltage ATmega168 or ATmega328V 2.7-5.5 V 2.7-5.5 V Digital I/O Pins 14 PWM Channels 6 Analog Input Channels 6 DC Current per I/O Pin Flash Memory SRAM EEPROM Clock Speed 40 ma 16 KB (of which 2 KB used by bootloader) 1 KB 512 bytes 8 MHz

Microcontroller Operating Voltage ATmega328P 5V Arduino Ethernet Input Voltage Plug (recommended) 7-12V Input Voltage Plug (limits) 6-20V Input Voltage PoE (limits) 36-57V Digital I/O Pins 14 (of which 4 provide PWM output) Arduino Pins reserved: Analog Input Pins 6 DC Current per I/O Pin 40 ma DC Current for 3.3V Pin Flash Memory SRAM EEPROM Clock Speed W5100 TCP/IP Embedded Ethernet Controller Power Over Ethernet ready Magnetic Jack Micro SD card, with active voltage translators Length Width Weight 10 to 13 used for SPI 4 used for SD card 2 W5100 interrupt (when bridged) 50 ma 32 KB (ATmega328P) of which 0.5 KB used by bootloader 2 KB (ATmega328P) 1 KB (ATmega328P) 16 MHz 68.6 mm 53.3 mm 28 gr

Arduino Mini Microcontroller Operating Voltage Input Voltage Digital I/O Pins Analog Input Pins DC Current per I/O Pin Flash Memory SRAM EEPROM Clock Speed Length Width ATmega328P 5V 7-9 V 14 (of which 6 provide PWM output) 8 (of which 4 are broken out onto pins) 40 ma 32 KB (of which 2 KB used by bootloader) 2 KB 1 KB 16 MHz 30 mm 18 mm

Arduino Nano Microcontroller Architecture Operating Voltage Flash Memory SRAM Clock Speed Analog I/O Pins 8 EEPROM DC Current per I/O Pins Input Voltage ATmega328P AVR 5 V 32 KB of which 2 KB used by bootloader 2 KB 16 MHz 1 KB Digital I/O Pins 22 PWM Output 6 Power Consumption PCB Size Weight Product Code 40 ma (I/O Pins) 7-12 V 19 ma 18 x 45 mm 7 g A000005

Particle Electron(Arduino Uyumlu Board) Özellikler STM32F205 ARM Cortex M3 microcontroller 1MB Flash 128K RAM 30 mixed-input GPIOs with advanced peripherals 36 pins total: 28 GPIOs (D0-D13, A0-A13), plus TX/RX, 2 GNDs, VIN, VBAT, WKP, 3V3, RST Power management circuit included on-board Board dimensions: 2.0" x 0.8" x 0.3" (0.5" including headers) Open source hardware Mobil Network içerisinde çalışabilmek için üretilmiştir.

LeoStick (Arduino Uyumlu Board) ATmega32U4 microcontroller, Arduino compatible with on-board USB, 32K Flash, 2.5K RAM, 1K EEPROM at 16MHz ISP 6-pin connector for advanced programming of the ATmega32U4 MCU

Digispark Pro (Arduino Uyumlu Board) 16 Mhz AVR MCU - using a true 16Mhz precision crystal 16KB Flash Memory (14.5K+ after bootloader) Serial over USB debugging and communication! 14 i/o Pins (2 shared with USB) I2C, true SPI, UART, LIN, and USI ADC on 10 pins 3 PWM Channels (which can be assigned to a selection of pins)

ESP8266 (Arduino Uyumlu Board) Processor: L106 32-bit RISC microprocessor core based on the Tensilica Xtensa Diamond Standard 106Micro running at 80 MHz 64 KiB of instruction RAM, 96 KiB of data RAM External QSPI flash: up to 16 MiB is supported (512 KiB to 4 MiB typically included) IEEE 802.11 b/g/n Wi-Fi Integrated TR switch, balun, LNA, power amplifier and matching network WEP or WPA/WPA2 authentication, or open networks 16 GPIO pins SPI I²C (software implementation)[5] I²S interfaces with DMA (sharing pins with GPIO) UART on dedicated pins, plus a transmit-only UART can be enabled on GPIO2 10-bit ADC (successive approximation ADC)

Intel Galileo Galileo is a microcontroller board based on the Intel Quark SoCX 1000 Application Processor, a 32-bit Intel Pentium-class SoC. It is hardware and software pin-compatible with Arduino shields designed for UnoR3

The Galileo offers the best of both worlds An Arduino platform for quick prototyping, especially useful at educational institutes. A full fledged IA32 processor (Quark) for the more serious developer The Intel Atom development board and the ARM based development boards can accommodate full (or partial) Operating Systems, together with many communication options such as Ethernet, PCI cards etc. The entire application ecosystem developed around IA32 architecture is fully compatible with the Galileo

Süreç

Linker Script

Mimari Diagram

Start-up and Booting Sequence