Perry High School. Geometry: S2W6

Similar documents
Geometry: Unit 1: Transformations. Chapter 14 (In Textbook)

Given ABC with A(-1, 1), B(2, 4), and C(4, 1). Translate ABC left 4 units and up 1 unit. a) Vertex matrix: b) Algebraic (arrow) rule:

7.1:Transformations And Symmetry 7.2: Properties of Isometries. Pre-Image:original figure. Image:after transformation. Use prime notation

12.4 Rotations. Learning Objectives. Review Queue. Defining Rotations Rotations

4-1 Congruence and Transformations

Name: Period 2/3/2012 2/16/2012 PreAP

11.1 Rigid Motions. Symmetry

Unit 7. Transformations

Table of Contents Date Topic Page(s) 9/14/15 Table of Contents (TOC) 1 3 9/14/15 Notebook Rubric 4 9/14/15 Unit A Reference Sheets 5 6

Unit 5: Transformations in the Coordinate Plane

Unit 1 Transformations in the Coordinate Plane

Geometry R. Unit 12 Coordinate Geometry. Day Classwork Day Homework Wednesday 3/7 Thursday 3/8 Friday 3/9

Name Period Teacher 1

Geometry Unit 4 Note Sheets Date Name of Lesson. Tangrams Activity. Rigid Motions. Translations. Symmetry. Quiz. Reflections.

Date Target Assignment Done! 2.1 Quiz 2.2 Quiz 2.3 Quiz Unit 2 Test

Section 12.1 Translations and Rotations

Introduction to Transformations. In Geometry

Unit 1 Test Review: Transformations in the Coordinate Plane

Geometry. 4.1 Translations

9 3 Rotations 9 4 Symmetry

Chapter 2: Transformations. Chapter 2 Transformations Page 1

CC Geometry H Aim #12: How do we do transformations without the use of a coordinate plane?

Name. YouTube Playlist:

Geometry. Topic 1 Transformations and Congruence

2-1 Transformations and Rigid Motions. ENGAGE 1 ~ Introducing Transformations REFLECT

I can identify reflections, rotations, and translations. I can graph transformations in the coordinate plane.

Unit 4 Guided Notes Part 2 Geometry

a triangle with all acute angles acute triangle angles that share a common side and vertex adjacent angles alternate exterior angles

TRANSFORMATIONS. The original figure is called the pre-image; the new (copied) picture is called the image of the transformation.

Lesson 9 Reflections Learning Targets :

GEOMETRY R Unit 4: More Transformations / Compositions. Day Classwork Homework Monday 10/16. Perpendicular Bisector Relationship to Transformations

Week 2. Monday: 1.1. Tuesday: 1.2. Wednesday: 1.3. Thursday: Catch up Friday: 1.4 Monday: OFF Tuesday: 1.5. Problem Solving, Patterns, Induction

Isometries and Congruence

Functions and Isometries OBJECTIVE #: G.CO.2

UNIT 1: TRANSFORMATIONS IN THE COORDINATE PLANE

Chapter 12 Transformations: Shapes in Motion

Geometry Midterm Review 2019

Chapter 2 Rigid Transformations Geometry. For 1-10, determine if the following statements are always, sometimes, or never true.

Geometry: , 4.5 Notes

GEOMETRY R Unit 2: Angles and Parallel Lines

Transformations. Working backwards is performing the inverse operation. + - and x 3. Given coordinate rule

Geometry Transformations

Lesson Plan #41. Class: Geometry Date: Monday December 17 th, 2018

Geometry. 4.2 Reflections

Transformations Geometry

1.8 Composition of Transformations

4-7 Study Guide and Intervention Congruence Transformations

( ) A calculator may be used on the exam. The formulas below will be provided in the examination booklet.

Geometry. Transformations. Slide 1 / 154 Slide 2 / 154. Slide 4 / 154. Slide 3 / 154. Slide 6 / 154. Slide 5 / 154. Transformations.

Geometric Transformations: Translation:

Chapters 7 & 8. Parallel and Perpendicular Lines/Triangles and Transformations

Vocabulary for Student Discourse Pre-image Image Rotate Symmetry Transformation Rigid transformation Congruent Mapping Point of symmetry

CCGPS UNIT 5 Semester 2 COORDINATE ALGEBRA Page 1 of 38. Transformations in the Coordinate Plane

Geometry Unit 1: Transformations in the Coordinate Plane. Guided Notes

Transformations. Working backwards is performing the inverse operation. + - and x 3. Given coordinate rule

Honors Geometry Sections

Some announcements. Game reflections deadline extended to Monday (4/4)

Chapter 9 - Transformations. Transformation: operation that maps (or moves) a preimage onto an image.

8. The triangle is rotated around point D to create a new triangle. This looks like a rigid transformation.

Chapter 5. Transforming Shapes

Name: Geometry Practice Test Unit 2 Transformations in the Plane. Date: Pd:

Objectives. Cabri Jr. Tools

Properties of Rotations

Properties of Rotations

Geometry. 4.4 Congruence and Transformations

Geometry. 4.4 Congruence and Transformations

A calculator, scrap paper, and patty paper may be used. A compass and straightedge is required.

Transformations and Congruence Test 2 Review

Vocabulary. Term Page Definition Clarifying Example. center of dilation. composition of transformations. enlargement. glide reflection.

Unit 1 Review. Switch coordinates Switch and negate coordinates

Lesson 5: Definition of Rotation and Basic Properties

NAME: DATE: PERIOD: 1. Find the coordinates of the midpoint of each side of the parallelogram.

Transformations. Transformations. Reflections. Rotations. Composition of Transformations

Translations, Reflections, and Rotations

Chapter 12 Transformations: Shapes in Motion

We can use square dot paper to draw each view (top, front, and sides) of the three dimensional objects:

Transformation. Translation To vertically and/or horizontally a figure. Each point. Reflection. Rotation. Geometry Unit 2: Transformations

Line Symmetry a figure has line symmetry if the figure can be mapped onto itself by a reflection over a line drawn through the figure.

Unit 14: Transformations (Geometry) Date Topic Page

Content Standards G.CO.4 Develop definitions of rotations, reflections, and translations in terms of angles, circles, perpendicular lines, parallel

Vocabulary. Term Page Definition Clarifying Example. center of dilation. composition of transformations. enlargement. glide reflection.

Rotations and Translations

A transformation is a function, or mapping, that results in a change in the position, shape, or size of the figure.

MATHia Unit MATHia Workspace Overview TEKS

PARCC Review 1. Select the drop-down menus to correctly complete each sentence.

Assignment Guide: Chapter 9 Geometry

HS Geometry Mathematics CC

2D Object Definition (1/3)

Course: Geometry Year: Teacher(s): various

1. For each transformation in the table below, indicate which properties are true by placing a check mark in every appropriate box.

Translation. Reflection Over a line Answers will vary YES NO YES NO. Rotation. Dilation. Name KEY Per Date. Geometry Review Qtr4, Lessons 1 2

Geometry Semester 1 Final Review Part 1 (Units 1 3)

Escher s Tessellations: The Symmetry of Wallpaper Patterns II. Symmetry II

Name Hr. Honors Geometry Lesson 9-1: Translate Figures and Use Vectors

Point A location in geometry. A point has no dimensions without any length, width, or depth. This is represented by a dot and is usually labelled.

Math 8: Unit 2 Test Transformations

2012 Curriculum Catalog

B ABC is mapped into A'B'C'

August 3 - August 31

MADISON ACADEMY GEOMETRY PACING GUIDE

Transcription:

Geometry: S2W6 Monday: 7.1 Rigid Motion in a Plane Pre-reading due Tuesday: 7.1 Work Day Wednesday: 7.2 Reflections Pre-reading due Thursday: 7.2 Work Day Friday: 7.3 Rotations Pre-reading due Next Week: Start Chapter 7.3, 7.4, 7.5, 7.6 1

Body Scan Meditation Skill Review Rigid Motion in a Plane Study Guide p. 394 Key Vocabulary Distance Formula (1-3) Complete the Statement (4-9) Study Strategy 2

7.1 Lecture Chapter 7: Movement in a Plane Art, animation, branding, etc. 7.1: Ridged Motion in a Plane Identifying Transformations Using Transformations in Real Life 3

MC Escher: Day and Night 4

Definitions Preimage a figure in a plan that can be reflected, rotated, or translated - starting object, blue Image the aftermath of a figure in a plan that has been reflected, rotated, or translated ending object, red Transformation the operation that MAPS, or moves, the preimage onto the image. 5

Preimage and Image 6

3 Basic Transformations 7

Transformation: Rotation 8

Transformation: Reflection 9

Transformation: Translation 10

Isometry a transformation that preserves lengths, angle measures, parallel lines, and distances between points. Isometry Isometric Paper? 11

Isometric Circles 12

In Architecture 13

In Architecture 14

More in arch. 15

Rotational Symmetry https://www.google.com /search?q=rotational+ symmetry&espv=2&bi w=1221&bih=818&so urce=lnms&tbm=isch &sa=x&ei=x4dsvj_ MHoamyAS0gIGIAw& ved=0cayq_auoaq #tbm=isch&q=rotation al+symmetry+logos&r evid=1162462543 Popular with Logos, Branding, Marketing, Identification, etc. 16

Day 1 Work: Mixed Review, page 402: 47-58 7.1: Day 1 & 2 https://www.youtube.co m/watch?v=wfuv_8lo HD4 (15 minutes) Work: Guided Practice, page 399: 1-11 Day 2 p399: 12-42, 44, 45 Board Check 17

7.2 Meditation Pre-Reading Due Focus on Reflections Using reflections in a plane Reflections with a line of symmetry 18

Reflections and Line of Reflections A reflection over a line m is a transformation that maps every point P in the plane to a point P, so that the following properties are true: 1. If P is not on m, then m is the perpendicular bisector of segment PP 2. If P is on m, then P=P. 19

Reflection: Basic 20

Reflection: Coordinate Plane If (x,y) is reflected over the x-axis, its image is the point (x,-y). If (x,y) is reflected over the y-axis, its image is the point (-x,y). 21

Reflection: x-axis 22

Reflection: y-axis? 23

Theorem A reflection is an isometry 24

Line of Symmetry A figure in the plane has a line of symmetry if the figure can be mapped onto itself by a reflection in the line. 25

Lines of Symmetry: Ex 26

More Lines of Symmetry 27

7.2: Day 1 & 2 Day 1 Mixed Review, page 410: 57-70 Guided Practice, page 407: 1-14 Day 2 Check D1 7.2: 15-32, 36-41, 44-46 48-51 Board Presentation 28

Rotations 29

Using Rotations: Definitions Rotation a transformation in which a figure is turned about a fixed point. Center of Rotation the fixed point about which a rotation transformation is turned. Angle of Rotation rays drawn from the center of rotation to a point and its image for this angle. 30

Center of Rotation 31

Angle of Rotation 32

Rotation: Properties A rotation about a point P through x degrees (x o ) is a transformation that maps every point Q in the same plane to a point Q, so that the following properties are true: 1. If Q is not point P, then QP = Q P and m QPQ =x o 2. If Q is point P, then Q=Q 33

Rotation Theorem A Rotation is an Isometry 34

Rules for Rotation around (o,o) Counter-Clockwise! Rotate 90 o, P(x,y) P (-y,x) Rotate 180 o, P(x,y) P (-x,-y) Rotate 270 o, P(x,y) P (y,-x) Example: A quadrilateral has verticies Q(4,0), R(4,3), and S(2,4). P(3,-1), Rotate PQRS 180 o counterclockwise about (0,0) and name the coordinates of the image. 35

Theorem 7.3 If lines k and m intersect at point P, then a reflection over k followed by a reflection over m is a rotation about point P. The angle of rotation is 2x o, where x o is the measure of the acute or right angle formed by k and m. M BPB = 2x o 36

2 Reflections = 1 Rotation 37

Rotational Symmetry Rotational Symmetry a figure in a plane has rotational symmetry if the figure can be mapped onto itself by a rotation of 180 o or less. 38

Rotational Symmetry 39

7.3: Day 1 & 2 Day 1 Work: Mixed Review page 419: 45-54 Work: Guided Practice page 416: 1-12 Day 2 Check D1 7.3: 412-420 13 19, 22-30, 31 43, 45 54; Quiz 1: 1 8 Board Presentation 40