D/N 1080P HD Vari-Focal Infrared IP Camera IPR7424/7428ESX & LR7424/7428EX Instruction Manual
IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. GRAPHIC SYMBOL EXPLANATION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
CAUTION Do not drop or strike this equipment. Sensitive electronics inside are vulnerable to excessive shock. Do not install the equipment near any naked flames or heat sources. Excessive heat could damage this unit. Do not expose this unit to rain or excessive moisture, avoid smoke and dust. Please the camera in an environmental housing for protection. If the camera gets wet, unplug it and have it checked by qualified service personnel. Do not cover cloth or to install this unit in poorly ventilated places. This may lead to overheating. Do not continue to operate if there appears to be fault. If the unit ceases to function, contact qualified service personnel for help. Do not touch the power connection with wet hands. Risk of short circuit or electric shock. Do not damage the power cord or leave it under pressure. Risk of fire or shock circuit.
CONGRATULATIONS Thank you for purchasing this 2 Megapixel D/N 1080P HD Infrared IP Camera. You now own one of the many fine network products we manufactured. This product has been carefully inspected under rigid quality control and should reach you in perfect condition. With reasonable care, it will provide years of reliable performance. We recommend that you read this installation and operation manual thoroughly before installing and operation your new system. Here you will find all the information you need to set up and use the system. If any questions are not answered in the manual, please contact your dealer. Before proceeding, please read and observe all instructions and warnings contained in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your new camera, check for missing or damaged items. If any item is missing, or if damage is evident, DO NOT I NSTALL OR OPERATE THIS PRODUCT. Contact your dealer for assistance.
Executive Summary IPR7424/7428ESX & LR7424/7428EX series is an 2 Megapixel D/N 1080P HD Infrared IP Camera, built-in H.264 AVC(Advanced Video Coding) video compression. H.264 AVC video compression engine supports high definition video quality, 1080P(1920x1080) resolution, bandwidth efficiency with PPPoE and DDNS. Also it provides higher bit rate of internet and diverse alarm functions such as movement video detection e-mail or FTP. Moreover, IPR7424/7428ESX & LR7424/7428EX series can do remote surveillance with ipad, iphone or Android cell phone. The software R&D engineer can use HTTP protocol(httpapi) or ONVIF protocol to develop related software, and integrate them with existing application software system. IPR7424/7428ESX & LR7424/7428EX series is ideal solution for remote video monitoring via internet.
PART DESCRIPTION & DIMENSION 231 200 109 105 90 SUN SHIELD TOP COVER BOTTOM CHASSIS BRACKET PAN ADJUSTMENT SCREW TILT ADJUSTMENT SCREW WINDOW 160 Unit: mm
INSTALLATION 1. Take out the bracket from the box first. Put the power cable and network cable through the bracket and then fix it to the wall (FIG.1 & FIG.2). FIG. 1 FIG. 2 2. Secondly, take out the camera body and open the top cover with screw driver (FIG.3). FIG. 3 3. Put the power cable and network cable through the bracket rubble first and then go through the bottom of camera body (FIG.4). Plug and fix the power cable to the terminal and plug the network cable to RJ-45 connector of the IP camera (FIG.5).
FIG. 4 FIG. 5 Note : L Live Earth N Neutral When using two-cord power cable, please connect them to "Live" and "Neutral". 4. Next, use the provided M5.0x10 screws (silver-2pcs) to fix the camera body on the bracket with screw driver (FIG.6). FIG.6 5. Loosen the pan and tilt adjustment screw on the bracket to turn the camera body to the desired angle and then tighten the screw (FIG.7). FIG.7
AUDIO OUT GND AUDIO IN GND DIN COM NO +5V OUT 6. First, adjust the lens on focus and zoom to form the optimal video image after that tighten the screws (FIG.8). FOCUS or ZOOM ZOOM or FOCUS FIG.8 7. Replace the top cover and tighten the screws (FIG.9 & FIG.10). FIG.9 FIG. 1 0 SYSTEM OVERVIEW Top View Input/Output Device Component Description 1 2 3 4 5 Alarm In/Out & Audio In/Out Connector SD Card Connector RJ-45 Jack Video Out Jack Load Default Button
D/N 1080P HD Vari-Focal Infrared IP Camera IPR7424/7428ESX & IPR7424/7428ELSX Instruction Manual IPD552EX2.2/4.2 N/P PRODUCTION COMPONENTS 1. 2Megapixel D/N 1080P HD Vari-Focal Infrared IP Camera 2. Instruction Manual H.264 HD IP Cameras INSTRUCTION MANUAL 3. CD Software Pack 4. L-type Hex Key Wrench SYSTEM ARCHITECTURES For connecting IPR7424/7428ESX & LR7424/7428EX series to the network, please follow one of the system architectures: (1). Use DC12V power adapter and network switch connected to a network. LAN LAN / Internet Non-PoE Switch 2 Megapixel D/N 1080P HD Vari-Focal IR IP Camera AC24V or AC100~240V PC
(2). Use with PoE of the network switch connected to the network. LAN LAN / Internet PoE+(30W) Switch 2 Megapixel D/N 1080P HD Vari-Focal IR IP Camera PC (3). Use PoE power injector and the network switch connected to the network. LAN LAN LAN / Internet PoE+(30W) Power Injector 2 Megapixel D/N 1080P HD Vari-Focal IR IP Camera AC Non-PoE Switch PC EMERGENCY FACTORY DEFAULT Use hardware to restore factory default settings, follow these steps: 1. Hold "RESET" key 10 seconds, then release. 2. After about 40 seconds, the network LED light is off, and then lit. 3. This camera has completed the factory default settings, and then reboot. 4. Use IPScan software search for this IP device. 5. Using a Internet browser open the IP device. 6. Enter the default username "admin" and password "pass" to operate. NOTE For the convenience of users, restore the factory default settings will revert to the default IP address 192.168.0.200.
SPECIFICATIONS IPR7424/7428ESX (1080P 30fps) Model No. Lens Pick Up Element Effective Pixels Chip Size Scanning System Infrared Cut Filter Min. Illumination White Balance Back Light Compensation Electronic Shutter Sense Up Sense Up Plus Auto Gain Control 3D Noise Reduction 2D WDR Privacy Masking Image Effects Live Video Output Audio In / Output IP Rating Window Peak Wavelength Infrared Beam Spread LED Radiant Distance Operating Temperature Dimension Weight Focal Length Iris Angle of View Power Input Voltage Power Consumption D/N 1080P HD Vari-Focal INFRARED IP CAMERA H V D IPR7424ESX3.6 79.3 ~ 29.8 59.4 ~ 22.4 IPR7424ESX2.4 IPR7428ESX2.4 9 ~ 22mm F1.4 99 ~ 37.3 36.9 ~ 15.5 1/2.7" CMOS Image sensor 1920(H) x 1080(V) = 2,073,600(pixel) 5.856mm(H) x 3.276mm(V) Progressive Scan Auto / Schedule / Day(Color) / Night(Mono) 0.1Lux at F1.4(Low Light Mode) / 0 Lux with IR Auto / Tungsten / Indoor / Fluorescents1 / Fluorescents2 / Outdoor1 / Outdoor2 Off/ On 1/30(25)s ~ 1/8,000s Off/ 1Frame/ 2Frames/ 3Frames/ 7Frames Yes 36dB Variable Gain Off/ 1~32 Selectable Off/ On Off/ On (4 zones) Brightness, Contrast, Hue, Saturation, Sharpness, Mirror, Flip CVBS 1.0Vp-p, 75ohm, BNC connector Mono, 1.4Vp-p, 50K Ω, Terminal connector IP66 ψ92 Heat Resistant Glass 850nm 30 35M -35 C ~ +50 C (-32 F ~ 122 F) Body: 121.5mm(W) x 109mm(H) x 231mm(D) / Bracket: 160mm(L) 1700g AC24V ± 10% IPR7428ESX3.6 3.3 ~ 12mm F1.4 Design and specification are subject to change without notice. 29.5 ~ 12.4 22 ~ 9.3 AC100~240V ± 10% AC24V ± 10% AC100~240V ± 10% PoE+ (IEEE 802.3at compliant) 14W (PoE+, 16W)
Video Compression Resolution Multiple profile Video Streaming Video Bitrate Security Users eptz & Digital Zoom OSD Alarm Functions CPU, Memory Maintenance Network Interface PC Requirement Network Protocols Profile #1 Profile #2 Profile #3 Profile #4 Mobile Phone and PDA System Integration CMX Video Display OS Two-way Audio SD Card Recording Alarm Input/ Output H.264, Motion JPEG 1080P(1920x1080) / 720P(1280x720) / D1(720x480) / CIF(352x240) H.264: up to 30fps @1920x1080, MJPEG: up to 30fps @720x480 H.264: up to 30fps @1280x720, MJPEG: up to 30fps @352x240 H.264: up to 30fps @1920x1080, MJPEG: up to 30fps @1280x720 H.264: up to 30fps @720x480, MJPEG: up to 15fps @1920x1080 Base64 HTTP encryption Multiple user access levels with password protection 10 user accounts available 8 simultaneous users Embedded SoC ARM11, 528MHz 256MB DDR2, 256MB flash memory Firmware update via HTTP, Firmware available at web site 10Mbps / 100Mbps Base-T, RJ-45 OS : Windows 2000, Windows XP, Windows Vista, Windows 7 Browser : Windows Internet Explorer 6, 7, 8 CPU : Intel Pentium 4 1.8GHz or above RAM : 1GB or above, Independent Display Card IP, TCP, UDP, HTTP, SMTP, NTP, DDNS, UPnP, FTP, ARP, DHCP, PPPoE, DNS, RTSP, RTCP, Telnet, ONVIF ipad, iphone and Android support ONVIF & LILIN HTTP API CMX HD3.6 support LILIN Universal ActiveX & LILIN Java Applet Embedded Linux 2.6.32 G.711/ PCM NETWORK RTP/HTTP, RTP/TCP, RTP/UDP 128Kbps ~ 5Mbps Frame rate and bit rate controllable on-the-fly VBR/ CBR/ GOP supported Yes, ROI is supported Text overlay for date, time, and camera name Alarm/ motion/ tampering/ face detection triggering recording into SD card Image upload over FTP and E-mail by face/ tampering/ motion detection Support SD/SDHC card for circular recording(card is not included) Digital 1 input(ttl, +3~5V) / 1 Output(N.O.) Design and specification are subject to change without notice.
LR7424/7428EX (1080P 15fps) Model No. Lens Pick Up Element Effective Pixels Chip Size Scanning System Infrared Cut Filter Min. Illumination White Balance Back Light Compensation Electronic Shutter Sense Up Sense Up Plus Auto Gain Control 3D Noise Reduction 2D WDR Privacy Masking Image Effects Live Video Output IP Rating Window Peak Wavelength Infrared Beam Spread LED Radiant Distance Operating Temperature Dimension Weight Focal Length Iris Angle of View Power Input Voltage Power Consumption D/N 1080P HD Vari-Focal INFRARED IP CAMERA H V D LR7424EX3.6 3.3 ~ 12mm F1.4 59.6 ~ 22.6 33.5 ~ 12.9 68.4 ~ 25.9 1/2.5" CMOS Image sensor 1920(H) x 1080(V) = 2,073,600(pixel) 5.70mm(H) x 4.28mm(V) Progressive Scan Auto / Schedule / Day(Color) / Night(Mono) 0.25Lux at F1.4(Low Light Mode) / 0 Lux with IR Auto / Tungsten / Indoor / Fluorescents1 / Fluorescents2 / Outdoor1 / Outdoor2 Off/ On 1/30(25)s ~ 1/8,000s Off/ 1Frame/ 2Frames/ 3Frames/ 7Frames Yes 36dB Variable Gain Off/ 1~32 Selectable Off/ x2/ x3/ x4 Off/ On (4 zones) Brightness, Contrast, Hue, Saturation, Sharpness, Mirror, Flip CVBS 1.0Vp-p, 75ohm, BNC connector IP66 ψ92 Heat Resistant Glass 850nm 30-35 C ~ +50 C (-31 F ~ 122 F) Body: 121.5mm(W) x 109mm(H) x 231mm(D) / Bracket: 160mm(L) 1700g AC24V ± 10% AC100~240V ± 10% PoE+ (IEEE 802.3at compliant) 14W (PoE+, 16W) Design and specification are subject to change without notice. LR7428EX3.6 Audio In / Output Mono, 1.4Vp-p, 50K Ω, Terminal connector 30M
Video Compression Resolution Maximum Frame Rate Video Streaming Video Bitrate Security Users Digital Zoom OSD Alarm Functions CPU, Memory Maintenance Network Interface PC Requirement Network Protocols Mobile Phone and PDA System Integration CMX Video Display OS Two-way Audio SD Card Recording Alarm Input/ Output H.264, Motion JPEG 1080P(1920x1080) / 720P(1280x720) / D1(720x480) / CIF(352x240) H.264: up to 15fps @1920x1080, 30fps @1280x720, 30fps @720x480 Motion JPEG: up to 15fps @1920x1080, 30fps @720x480, 30fps @352x240 Base64 HTTP encryption Multiple user access levels with password protection 10 user accounts available 8 simultaneous users Embedded SoC ARM11, 528MHz 256MB DDR2, 256MB flash memory Firmware update via HTTP, Firmware available at web site 10Mbps / 100Mbps Base-T, RJ-45 OS : Windows 2000, Windows XP, Windows Vista, Windows 7 Browser : Windows Internet Explorer 6, 7, 8 CPU : Intel Pentium 4 1.8GHz or above RAM : 1GB or above, Independent Display Card IP, TCP, UDP, HTTP, SMTP, NTP, DDNS, UPnP, FTP, ARP, DHCP, PPPoE, DNS, RTSP, RTCP, Telnet, ONVIF ipad, iphone and Android support ONVIF & LILIN HTTP API CMX HD3.6 support LILIN Universal ActiveX & LILIN Java Applet Embedded Linux 2.6.32 G.711/ PCM NETWORK RTP/HTTP, RTP/TCP, RTP/UDP 128Kbps ~ 5Mbps Frame rate and bit rate controllable on-the-fly VBR/ CBR/ GOP supported Yes Text overlay for date, time, and camera name Alarm/ motion detection triggering recording into SD card Image upload over FTP and E-mail by audio/ motion detection Support Micro SD/SDHC card for circular recording(card is not included) Digital 1 input(ttl, +3~5V) / 1 Output(N.O.) Design and specification are subject to change without notice. 66-IPR7428CSE-2
MERIT LILIN ENT. CO., LTD http://www.meritlilin.com 66-IPR7428CSE