44 One-Piece LC Connector Singlemode Telecordia GR-326 tested (Report #50-652) Multimode TIA/EIA 568-B.3 tested Singlemode and Multimode are compatible with both anaerobic adhesives and heat cure epoxy adhesives Universal Connector Body Common body for simplex or duplex Common body for jumper or buffer applications Fewer parts to inventory Duplex Clip Field installable Makes simplex assemblies duplex Correct polarity errors Used for both jumpers and buffered fiber applications One-Piece Body Improved rigidity Improved side-load strength (.6-2.0 shown) Fiber Optic Products Catalog LC Connectors Widened Thumb Latch coded to comply with 568 C Aqua for 50/25 laser optimized Black for standard 50/25 Beige for 62.5/25 Blue for singlemode LC Connector Kits Duplex Clip Widened Thumb Latch Increased hit area Increased bend strength Ramped front latch for snag resistance Diamond Knurled Crimp Body Increased tensile proof strength Identical to Tyco Electronics SC/FC design Universal One-Piece Connector Body Diamond Knurled Crimp Body Insertion Loss 0.2 db Typical Reflectance -55 db Typical Operating Temperature -40 C to +75 C Durability 500 Cycles Fiber Type Boot Used with Individual Pack Bulk Pack 900 µm Buffered 98384-98384-2 Singlemode Blue Blue.6-2.0 mm Jacketed 98266-98266-2 3.0 mm Jacketed 98374-98374-2 900 µm Buffered 98385-3 98385-5 Beige Aqua.6-2.0 mm Jacketed 98267-3 98267-5 Simplex 3.0 mm Jacketed 98375-3 98375-5 900 µm Buffered 98385-4 98385-6 Multimode Beige Black.6-2.0 mm Jacketed 98267-4 98267-6 3.0 mm Jacketed 98375-4 98375-6 900 µm Buffered 98385-98385-2 Beige Beige.6-2.0 mm Jacketed 98267-98267-2 3.0 mm Jacketed 98375-98375-2 900 µm Buffered 98387-98387-2 Singlemode Blue Blue.6-2.0 mm Jacketed 98372-98372-2 3.0 mm Jacketed 98376-98376-2 900 µm Buffered 98388-3 98388-5 Beige Aqua.6-2.0 mm Jacketed 98373-3 98373-5 Duplex 3.0 mm Jacketed 98377-3 98377-5 900 µm Buffered 98388-4 98388-6 Multimode Beige Black.6-2.0 mm Jacketed 98373-4 98373-6 3.0 mm Jacketed 98377-4 98377-6 900 µm Buffered 98388-98388-2 Beige Beige.6-2.0 mm Jacketed 98373-98373-2 3.0 mm Jacketed 98377-98377-2 Duplex Clip For use with Simplex Kits Black 75437-
One-Piece LC Connector Family 3.0 Jacket LC Connectors (Continued) Connectors/Adapters/ Tooling & Accessories.6-2.4 mm Jacket LC Connector Component Selection Chart (bulk packaged) 250 / 900 µm Buffered Fiber Fiber Type Simplex Connector Crimp Eyelet Strain Relief Strain Relief Assembly & Duplex Clip Cable Size with Heat Shrink Crimp Eyelet Dust Cap (see chart below).6-2.0 mm 637450- Straight/Bend Limiting 58853-X.6-2.0 mm 637450- Angled 374737-X.6-2.0 mm 637450-50 Degree Angle 6457543-X Singlemode 828456-75437- 2.4 mm 658889- Straight/Bend Limiting 58853-X (blue hsg.) 2.4 mm 658889- Angled 374737-X 2.4 mm 658889-50 Degree Angle 6457543-X 3.0 mm 55048-3 Straight 50276-X 900 µm 900 µm Buffer, 0 mm 658862-X.6-2.0 mm 637450- Straight/Bend Limiting 58853-X.6-2.0 mm 637450- Angled 374737-X.6-2.0 mm 637450-50 Degree Angle 6457543-X Multimode 754625-75437- 2.4 mm 658889- Straight/Bend Limiting 58853-X (beige hsg.) 2.4 mm 658889- Angled 374737-X 2.4 mm 658889-50 Degree Angle 6457543-X 3.0 mm 55048-3 Straight 50276-X 900 µm 900 µm Buffer, 0 mm 658862-X Crimp Tool Dieset only - 58875- Crimp Tool with Dieset - 58876- Instruction Sheet: 408-8675 http://www.tycoelectronics.com/documents Note: All of the above are also available in simplex. Termination Kit - 754462- Upgrade Kit for Anaerobic terminations - 754603-374737-X 6457543-X 658862-X 58853-X Strain Relief Base Part Number Beige Blue Black Red Aqua 58853-5 -2-3 -8 374737-2 - -3 6457543 - -2-4 50276-3 -4 - -5-658862 - -2-5 -4-8 45
Tight Jacketed LC Connectors Multimode or singlemode Simplex or duplex Tested using MIL-PRF- 85045/6 2.0 mm cable LC Commercial Item (CID) interim approval by the Naval Surface Warfare Center, Dahlgren Division Application In Flight Networks Shipboard Applications Aero Market LC Connectors (Continued) The tight jacketed LC Connectors are non pullproof versions of the standard connectors that are designed for use with tight construction cable. Unlike standard connectors, this design allows the jacket and buffer to move together, reducing the chances of micro-bends and fiber breakage. Boot, Bend Limiting 52.0 [2.05] Ref. Crimp Eyelet / Heat Shrink Assembly Connector Sub Assembly Fiber Type Kit 6828095-X Simplex,.6 2.0 mm Singlemode (blue body & straight boot) 682830-X Duplex,.6 2.0 mm 98228-X Simplex, 2.4 mm 6828094-X Simplex,.6 2.0 mm Multimode (beige body & straight boot) 682829-X Duplex,.6 2.0 mm 9853-X Simplex, 2.4 mm Note: X = - for individual package, -2 for bulk package. Instruction Sheet 408-004. See http://www.tycoelectronics.com/documents. Duplex Clip Available ( 75437-). 46
LC Connectors (Continued) Short Boot LC Connector Overall LC connector length 42.5 mm (compares to 52 mm standard product) Multimode or singlemode Simplex or duplex Anti-snag rear connector latch For.6 mm to 2.4 mm cable GR-326 Small Form-Factor Performance Requirements The short boot LC connector provides GR-326 level performance while reducing ferrule tip to boot length to 42.5 mm. The 20% reduction in length is ideal for installing in cabinets or other enclosed spaces, protecting against potential mechanical damage from closed cabinet doors. Connectors/Adapters/ Tooling & Accessories Bend Limiting Boot Crimp Eyelet / Heat Shrink Assembly Connector Subassembly Protective Cover Fiber Type Kit Singlemode (blue body & 98407-X Simplex,.6-2.0 mm straight blue boot) 98406-X Duplex,.6-2.0 mm Multimode (beige body & 98405-X Simplex,.6-2.0 mm straight beige boot) 98404-X Duplex,.6-2.0 mm Note: X = - for individual package, -2 for bulk package The boot (98403-X) is also sold separately, for use with any Tyco Electronics LC connector. 47.00 [.850] Ref. 42.50 Ref. [.673] 3.95 [.258] Ref. 457567-4 Adapter Ref. 27.45 Ref. Not Included in Kit [.08] 47
LC Connectors (Continued) Wide Latch Multimode KRONE Universal Adapter Narrow Latch Multimode Narrow Latch LC Connector One-piece housing Reduced thumb latch for tight interconnections Mates with Krone universal.25 mm adapter Multimode or singlemode Duplex through use of clip ( 75437-) Anti-snag rear connector latch Subassembly can be used with 900 µm to 3.0 mm cable GR-326 Small Form Factor Performance Narrow Latch Singlemode The reduced thumb latch on this connector provides superior performance when space is limited by maintaining all of the other features of the Tyco Electronics LC connector. Crimp Eyelet / Heat Shrink Assembly (Not sold through Tyco Electronics) Bend Limiting Boot Wide Latch Singlemode Connector Assembly Protective Cover Fiber Type Kit Singlemode (Blue Body & Straight Blue Boot) 98538-X Simplex,.6-2.0 mm Multimode (Beige Body & Straight Beige Boot) 98539-X Simplex,.6-2.0 mm Note: X = - for individual package, -2 for bulk package 52.00 [2.047] Ref. 48 KRONE is a trademark of KRONE Optical Systems, Inc.
LC/SC Flexible Boot Compatible with any Tyco Electronics LC Connector Compatible with Tyco Electronics SC 658874-3 and 658875-5 Controls cable radius in limited space environments For use with.6 to 2.4 mm multimode or singlemode cable Requires crimp eyelet with heat shrink ( 637450-X or 658889-) LC Connectors (Continued) Base Beige Blue Black Red 98003-5 -2-3 Connectors/Adapters/ Tooling & Accessories LC/SC 900 µm GR-326 Style Boot Compatible with any Tyco Electronics LC Connector Compatible with Tyco Electronics SC parts 658874-3 and 658875-5 Provides bend limiting support For use with 900 µm multimode or singlemode fiber Base Beige Blue Black Green 82884-4 - -2-3 49
LC Adapters LC Duplex Adapter for SC Cutout Plastic Flanged Beige 6457567-8 Black 2-6457567- Aqua 2-6457567-0 Metal Blue -6457567-3 Beige 6457567-7 Flangeless Black -6457567-9 Aqua -6457567-8 Beige 6457567-5 Black -6457567-7 Flanged Aqua -6457567-6 Blue 6457567-4 Ceramic Green 6457567-6 Beige 6457567-2 Black -6457567-5 Flangeless Aqua -6457567-4 Blue 6457567- Green 6457567-3 LC Duplex Adapter for LC Cutout Plastic Metal Ceramic LC Adapter for SC Cutout Metal Flanged 754683- Ceramic Flangeless Electroless 754682- Flangeless w/ Nickel EMI Shielding 754727- LC Simplex Adapter Plastic Ceramic Duplex Sr-Jr Duplex Sr-Sr Duplex Sr-Jr Duplex Sr-Sr Beige 98550-4 Blue 98550-3 Beige 98549-4 Blue 98549-3 Beige 98550-2 Blue 98550- Beige 98549-2 Blue 98549- Simplex Beige 457062-2 Adapter Blue 457062- Ø 2.5 [.098] 8.0 [.709] Recommended Panel Cutout Max. Panel Thk..70 [.067] Recommended Panel Cutout Panel Thk..2/.7 [.047/.067] 9.5 0.0 [.375.393] 3.0 3.5 [.52.53] M2 x 0.4 or 2-56 UNC When Required Recommended Panel Cutout Panel Thk..2/.7 [.047/.067] 7. 7.2 [.280.283] 3.2 3.4 [.520.527] M2 x 0.4 or 2-56 UNC When Required 3.0 3.5 [.52.53] 9.5 0.0 [.375.393] 8.0 [.709] 3.2 3.4 [.520.527].7.8 [.46.465] Recommended Panel Cutout Panel Thk..2/.7 [.047/.067] LC Quad Adapter Plastic Flanged Metal Flanged Beige 695790-5 Ceramic Flanged Blue 695790-4 50 Recommended Panel Cutout Max. Panel Thk..7 [.067]
Singlemode and multimode product range For digital network applications PC end face available on both singlemode and multimode connectors For analog network applications, APC end face available on singlemode connectors (8 ) Connector design uses.25 mm ceramic ferrule technology Polarized for precise insertion Factory terminated cable assemblies LSZH sheathed cable available High optical performance (low insertion, high return loss) High density (up to 8 lines per module) Insertion Loss 0. db Typical Reflectance -55 db Typical Operating Temperature -25 C to +75 C Durability 500 Cycles MU High Density Connectors Tyco Electronics MU high density fiber optic interconnection system offers a solution for high performance telecommunications networking. The system centers around the fully standardized MU connector, which is also sometimes known as the Mini SC. The MU connector is at least half the size of the standard SC connector. It can offer twice the port density but all the optical performance of traditional fiber optic connectors. Featuring a similar latching mechanism to the SC connector, the MU is just as easy to connect and disconnect. The MU system includes a complete range of multimode and singlemode pre-terminated cable assemblies; bulkhead adapters; backplane housings; system card housings; connector kits; termination tooling and customer polishing processes. Connectors/Adapters/ Tooling & Accessories Key Applications Front Panel I/O and High Density Patch Panels for Optical Transmission Equipment, Optical Distribution Frames and Optical Network Units. Full range of simplex, duplex and 8 position bulkhead adapters coded adapters for ease of identification Tuneable versions available to achieve lower insertion losses Push-pull type latching mechanism Fully compliant with relevant IEC standards (IEC 60874-, CECC 86 305 80) Exceeds ETSI performance requirements (ETSI Grade P) Back Panel I/O in Optical Transmission and Switching Equipment 8 position Type L optical modules available 2.0 mm misalignment pickup tolerance during mating Zero force on backplane when fully mated FOKIT MU SM PC 0.9 25/.0 FOKIT MU SM PC 0.9 26/.0 FOKIT MU SM PC 25 µm, 2.0 mm FOKIT MU SM PC 26 µm, 2.0 mm Zero tensile load on daughter card when fully mated Constant mating force during 2.5 mm free float Fully compliant with IEC 6097 and IEC 6076-4-0 MU Standards Compliance Product range MU cable assembly Applicable standards IEC 60874- CECC 86 305 80 (MU-APC) I-ETS 300 67 IEC 6300 Product range Z-PACK 2 mm HM Product Applicable standards IEC 6097 IEC 6076-4-0 348982-348982-2 06875-06875-2 Note: are RoHS compliant except: Indicates non-rohs compliant. 5
MU High Density Connectors (Continued) MU Bulkhead Adapter The MU bulkhead adapter is designed to help save valuable panel space in high density applications. The adapter enables the interconnection of two MU connectors and features a.25 mm ceramic alignment sleeve to ensure precise fiber alignment and low insertion loss, both during and after the interconnection process. The MU bulkhead adapter is available in PC and APC versions for both digital and ana- log network applications. It is also available in a choice of simplex, duplex and 8 position versions. PC finish Simplex MU Adapter 233263- Duplex MU Adapter 233263-3 Duplex MU Adapter with SC cut-out 348840-2 APC finish Duplex MU Adapter with SC cut-out 348840- Z-PACK 2 mm HM Type L and M Connector s Z-PACK 2 mm HM connector housings offer a solution to the demand for discrete fiber lines, allowing single disconnects and routing on the backplane. The 8 position Type L connector housing is fully optical and can accommodate up to 8 fiber lines. These connector housings are available in female configurations and are designed for use on the system card. The hybrid Type M connector housing combines optical and electrical contacts in one housing, with 55 signal contact positions and 4 fiber optic lines. It allows easy migration from combined optical / electrical to full optical backplane inter-connections. Female Type M connector housings are suitable for use on the system card while male Type M connector housings are designed for back panel application. Tyco Electronics also designs and manufactures a range of MT based fiber optic backplane connectors, LIGHTRAY MPX fiber optic backplane connectors. For further information, see Cable Assemblies & Backplane Interconnects Section 2, pages 37-5. Type L Male 06743- Female 06744- HM : Hard Metric 52 MU Backplanes Complies to IEC 6097 and IEC 6076-4-0 Constant mating force during 2.5 mm free float Zero tensile load on system card and backplane when fully mated Low insertion / extraction forces Scalable system allows easy implementation of future upgrades Low loss High return loss APC versions available Float in all directions (including x and y) Misalignment pick up tolerances 2.0 horizontal, 2.5 mm vertical, and 2 degrees angular 2 Position Backplane (includes mounting bracket) 3960- Systemcard 39095-4 Position Backplane (includes mounting bracket) 396- Systemcard 39094- Note: Future product extensions planned: 6 position and 8 position versions. Please contact your local Sales Engineer for additional information. Note: are RoHS compliant except: Indicates non-rohs compliant.
One-piece connector body: Fastest assembly Field installable Anaerobic adhesive compatible Compliant with JIS C-5973 Fibre Channel TIA FOCIS-3 Pre-radiused ceramic ferrules For 25 µm cladding diameter Instruction Sheet 408-8674 http://www.tycoelectronics. com/documents coded to comply with 568C Aqua for 50/25 laser optimized Black for standard 50/25 Beige for 62.5/25 Blue for singlemode for Singlemode SC Connector Kits Polymer Crimp Body Insertion Loss <0.2 db Typical Return Loss <-55 db Typical Durability 200 Cycles for GR-326 Style Product Insertion Loss <0.2 db Typical Return Loss <-59 db Typical Durability 200 Cycles Tested to GR-326 (Test Report 50-584) Tunable 6 positions for Multimode SC Connector Kits Insertion Loss <0.2 db Typical Durability 500 Cycles TIA 586B Compliant Note: All part numbers are RoHS compliant. SC Connectors Simplex Connector Multimode SC Connector Kits Duplex Connector Singlemode SC Connector Kits Polymer Crimp Body GR-326 Style Singlemode SC Connector Kits Metal Crimp Body SC.6 mm to 2.0 mm Connector Boot Used With Individual Pack Bulk Pack Crimp Tool 900 µm Buffered, 3.0 mm Jacketed 5504646-7 5039- Simplex Blue Blue 3.0 mm Jacketed 5504646-5504646-2 5039-2.4 mm Jacketed 5504933-2 5504933-4 492026-2.0 mm Jacketed 5503934-2 5503934-3 492026-900 µm Buffer 549223-549223-2 N/A Duplex Blue Blue 3.0 mm Jacketed 5504655-5504655-2 5039-2.0 mm Jacketed 5504936-2 492026- Boot Used With Individual Pack Bulk Pack Crimp Tool 3.0 mm Jacketed 4-9886-5 () 4923- () 58532- Simplex Blue Blue 2.4 mm Jacketed 658874-5 658874-6 58876-2.0 mm Jacketed 658874-658874-4 58876- Duplex Blue Blue 2.4 mm Jacketed 6693776-5 6693776-6 58876-2.0 mm Jacketed 6693776-6693776-2 58876- Boot Used With Individual Pack Bulk Pack Crimp Tool 900 µm Buffered, 3.0 mm Jacketed -5503948-5039- Beige Aqua 3.0 mm Jacketed -5503948-0 5039-2.0 mm Jacketed 550493-5 492026-900 µm Buffer 5504932-5 N/A 900 µm Buffered, 3.0 mm Jacketed -5503948-2 5039- Simplex Beige Black 3.0 mm Jacketed -5503948-3 5503948-8 5039-2.0 mm Jacketed 550493-6 550493-3 492026-900 µm Buffer 5504932-5504932-2 N/A 900 µm Buffered, 3.0 mm Jacketed 5503948-5 5039- Beige Beige 3.0 mm Jacketed 5503948-5503948-2 5039-2.4 mm Jacketed 5504930-5504930-2 492026-2.0 mm Jacketed 550493-492026- 900 µm Buffer 5504932-6 N/A Beige Aqua 3.0 mm Jacketed 5504657-8 5039-2.0 mm Jacketed 5504928-3 492026-3.0 mm Jacketed 5504657-9 5039- Beige Black Duplex 2.0 mm Jacketed 5504928-4 492026-3.0 mm Jacketed 5504657-5504657-2 5039- Beige Beige 2.4 mm Jacketed 5504927-5504927-2 492026-2.0 mm Jacketed 5504928-492026- 53 Connectors/Adapters/ Tooling & Accessories
SC Connectors (Continued) SC Connector Components 3.0 mm Jacket.6-2.4 mm Jacket 900 µm Buffered Fiber SC Duplex Clip (Black) 6348522- Use 2 pieces to duplex simplex housings SC Connector Component Selection Chart (bulk packaged) Fiber Type Simplex Connector Sub-Assembly Duplex Clip* Cable Size Crimp Eyelet w/ Heat Shrink Crimp Eyelet Strain Relief ** 645725-5 (2) 6348522-3.0 mm 504973-3 58849-X Singlemode - GR-326 Style 2.4 mm 658889-58853-X 658874-3 (2) 6348522-.6-2.0 mm 637450-2 58853-X 900 µm 82884-X 3.0 mm 503970-3 550397-X 2.4 mm 503970-6 550397-X Singlemode - Polymer Crimp Body 549223-7 (2) 6348522-2.0 mm 503970-9 550397-X 900 µm 6457493-X (long) 6278309-X (short) 2.4 mm 658889-58853-X Multimode - Metal Crimp Body (Ceramic Ferrule) 658875-5 (2) 6348522-.6-2.0 mm 637450-2 58853-X 900 µm 82884-X 3.0 mm 503970-3 550397-X 2.4 mm 503970-6 550397-X Multimode - Polymer Crimp Body (Ceramic Ferrule) 5503948-7 (2) 6348522-2.0 mm 503970-9 550397-X 900 µm 6457493-X (long) 6278309-X (short) * For Fibre Channel compliant assemblies, use one () piece each of 503487-Y and 503488-Y. (Dash refers to color refer to customer drawing for details). ** Strain relief dash number indicates color - see page 55 for details. 54
3.0 mm - GR-326 Style 3.0 mm Angled SC Connectors (Continued) SC Strain Reliefs Jacketed Cable GR-326 Style Black Red Beige Blue 3.0 mm No -550397-0 -550397-550397- 550397-2 2.4 mm No -550397-2 -550397-3 550397-3 550397-4 2.0 mm No 2-550397-3 2-550397-7 550397-5 550397-6 3.0 mm Yes 58849-2.6 mm - 2.4 mm Yes 58853-3 58853-5 58853-2 SC Strain Reliefs Angled Black Beige Blue 3.0 mm Simplex 278705-3 278705-2 278705-2.0 mm Simplex 374737-3 374737-2 374737-2.0 mm 45 Simplex 6457543-4 6457543-6457543-2 Connectors/Adapters/ Tooling & Accessories 900 µm Short 900 µm SC Strain Reliefs 900 micron Black Beige Blue Long (33 mm) 900 µm 6457493-3 6457493-9 6457493- Short (0 mm) 900 µm 6278309-6278309-2 GR-326 Style 900 µm 82884-2 82884-4 82884- GR-326 Style 900 µm SC Low Loss Loopback Connector 55034-62.5/25 Multimode Use for Equipment Testing 0.6 db Insertion Loss 0.5" Ferrule Centerline 55034-2 50/25 Multimode Use for Equipment Testing 0.8 db Insertion Loss 0.5" Ferrule Centerline 5504883- Singlemode Use for Equipment Testing.5 db Insertion Loss 0.5" Ferrule Centerline 55
SC Connectors (Continued) Tight Jacketed SC Connectors Multimode or singlemode Simplex or duplex Tested using MIL-PRF- 85045/6 2.0 mm cable SC Commercial Item (CID) interim approval by Naval Surface Warfare Center, Dahlgren Division Application In Flight Networks Shipboard Applications Aero Market The tight jacketed SC Connectors are non pullproof versions of the standard connectors that are designed for use with tight construction cable. Unlike standard connectors, this design allows the jacket and buffer to move together, reducing the chances of micro-bends and fiber breakage. Boot, Bend Limiting 56.9 [2.24] Crimp Eyelet / Heat Shrink Assembly Connector Sub Assembly Tight Jacketed SC Connector Kits Fiber Type Kit 682800-X Simplex,.6 2.0 mm Singlemode (blue body & straight boot) 828573-X Duplex,.6 2.0 mm 98227-X Simplex, 2.4 mm 6828099-X Simplex,.6 2.0 mm Multimode (beige body & straight boot) 828574-X Duplex,.6 2.0 mm 9854-X Simplex, 2.4 mm Note: X = - for individual package, -2 for bulk package. Instruction Sheet 408-005. See http://www.tycoelectronics.com/documents. 56
SC Connectors (Continued) SC Adapters Suitable for any SC connector Available with metal or ceramic alignment sleeves Choice of housing materials and colors coded to comply with 568C Aqua for 50/25 laser optimized Black for standard 50/25 Beige for 62.5/25 Blue for singlemode Duplex adapters accept two simplex connectors or one duplex connector Assortment of hybrid configurations available Mounting screws available 503663- Slide-on cover available EMI gasketed parts available SC Simplex Adapter - Plastic Flangeless SC Simplex Adapter - Plastic SC Simplex Adapter - Plastic Sleeve Material/Application Beige 550464- Metal/MM only Black 550464-3 Aqua 550464-4 Beige 5502632-9 Metal Black 5502632-7 Aqua 2-5502632-3 Blue 5502632-8 Beige -5502632-2 Ceramic Black -5502632-0 Aqua 2-5502632-4 Blue -5502632- Ceramic/APC Green 828028-2 Flangeless SC Simplex Adapter - Plastic Black 5504632- Metal Blue 5504632-3 Black 5504632-2 Aqua 5504632-6 Ceramic Blue 5504632-4 Green 5504632-5 Connectors/Adapters/ Tooling & Accessories SC Simplex Adapter - Metal Metal Electroless Nickel 6278348- Ceramic Electroless Nickel 6278348-3 SC Simplex Adapter - Metal Flangeless SC Simplex Adapter - Metal Metal Electroless Nickel 6278348-5 Ceramic Electroless Nickel 6278348-7 Note: All part numbers are RoHS compliant. Flangeless SC Simplex Adapter - Metal SC Duplex Adapter - Plastic SC Duplex Adapter - Plastic Sleeve Material/Application Beige 5504640- Metal/MM only Black 5504640-4 Aqua 5504640-6 Beige 5502776-9 Metal Black 5502776-7 Aqua 2-5502776-5 Blue 5502776-8 Beige -5502776-2 Ceramic Black -5502776-0 Aqua 2-5502776-6 Blue -5502776- Ceramic/APC Green 2-5502776-3 57
SC Connectors (Continued) SC Adapters (Continued) SC Duplex Adapter - Metal Metal Electroless Nickel 6278049- Ceramic Electroless Nickel 6278049-3 SC Duplex Adapter Shielded SC Duplex Adapter - Metal Metal Electroless Nickel 6374223- Ceramic Electroless Nickel 6374223-3 SC Duplex Metal Adapter w/ EMI Shielding Designed to help prevent EMI leak Ideal for high-speed applications SC to ST Hybrid Adapters SC to ST Simplex Adapter - Plastic SC to ST Simplex Adapter - Plastic Beige 5502780-3 Metal Black 5502780- Aqua 2-5502780-0 Blue 5502780-2 Beige 5502780-6 Ceramic Black 5502780-4 Aqua 2-5502780- Blue 5502780-5 SC to ST Simplex Adapter - Metal Metal Electroless Nickel 6278350- Ceramic Electroless Nickel 6278350-3 SC to ST Simplex Adapter - Metal 58
SC Connectors (Continued) SC to ST Hybrid Adapters (Continued) Flangeless SC to ST Simplex Adapter - Metal SC to ST Duplex Adapter - Plastic Flangeless SC to ST Simplex Adapter - Metal Metal Electroless Nickel 6278350-5 Ceramic Electroless Nickel 6278350-7 SC to ST Duplex Adapter - Plastic Beige 5504663-4 Metal (MM Only) Black 5504663-6 Aqua 5504663-5 Beige 550337-3 Metal Black 550337- Aqua 2-550337- Blue 550337-2 Beige 550337-6 Ceramic Black 550337-4 Aqua -550337-9 Blue 550337-5 Connectors/Adapters/ Tooling & Accessories SC to ST Duplex Adapter - Metal Metal Electroless Nickel 627805- Ceramic Electroless Nickel 627805-3 SC to ST Duplex Adapter - Metal Slide-on Retractable Cover for SC Simplex or Duplex Applications The Tyco Electronics slideon retractable cover is used for simplex or duplex SC applications. These retractable doors slip onto the end of existing Tyco Electronics adapters and can be mounted after the adapter has already been installed. 693539- Blue Simplex SC 693539-2 Beige Simplex SC 693539-3 Green Simplex SC 693540- Blue Duplex SC 693540-3 Green Duplex SC 59
ST Connectors Epoxy Type Epoxy type connector Pre-radiused ceramic ferrule Available in bulk packages Crimp tool 58433-4 Ceramic Singlemode Ceramic Insertion Loss 0.3 db typical Back Reflection <-40 db typical Durability 200 cycles Materials Ferrule Material Ceramic Body Material Nickel Plated Brass Coupling Nut Material Plated Die Cast Singlemode ST Connector Kits Ceramic Ferrule Body Coupling Nut Boot Used With Individual Pack Bulk Pack IS Sheet Zinc Yellow (900 µm) 900 µm and 250 µm Fibers 550363-2 550363-3 408-9645 Yellow 900 µm and Nickel-plated Zinc (Bend-Limiting) 250 µm Fibers, Brass 3.0 mm Cable 5502579-2 408-9645 Zinc Yellow 900 µm and (Short) 250 µm Fibers, 3.0 mm Cable 5502580-2 5502580-4 408-9645 Ceramic Multimode Ceramic Insertion Loss 0.3 db typical Durability 500 cycles Multimode ST Connector Kits Ceramic Ferrule Body Coupling Nut Boot Used With Individual Pack Bulk Pack IS Sheet Black (Short) 3.0 mm Cable 503569-2 408-997 Black (Short) 900 µm Fiber, 3.0 mm Cable 50357-408-997 Polymer Polymer 900 µm and Black (Buffer)/ 250 µm Fibers, Black (Short) 2.4 mm & 550357-3 408-997 3.0 mm Cable Zinc Black (Short) 3.0 mm Cable 503677-2 503677-408-997 Black (Short) 3.0 mm Cable 5492458-2 408-9645 Black (Buffer)/ Black (Short) 900 µm and 3.0 mm Cable 5492458-408-9645 Black (Buffer)/ 900 µm and Black 250 µm Fibers, Nickel-plated (Bend Limiting) 2.4 mm & Brass Zinc 3.0 mm Cable 550380-408-9645 Black (Short) 2.4 mm & 3.0 mm Cable -550380-6 2-550380-0 408-9645 900 µm and Black (Right Angle) 250 µm Fibers, 2.4 mm & 5502674-408-9645 3.0 mm Cable 60
Multimode Polymer Composite Insertion Loss 0.3 db Typical Durability 500 Cycles Crimp Tool 58433-4 Instruction Sheet 408-997 http://www.tycoelectronics.com/documents Materials Ferrule Composite Polymer Body Polymer Coupling Nut Polymer ST Connectors Epoxy Type (Continued) Polymer Composite Multimode ST Connector Kits Polymer Ferrule Body Coupling Nut Boot Used With Individual Pack Bulk Pack Black (Buffer)/ 900 µm and Black (Short) 250 µm Fibers, 550345- Polymer Polymer 3.0 mm Cable Black (Short) 3.0 mm Cable 503424-3 Connectors/Adapters/ Tooling & Accessories Multimode Stainless Steel Insertion Loss 0.3 db Typical Operating Temp. Range -30 C to +70 C Durability 500 cycles Crimp Tool 5855- Instruction Sheet 408-45 http://www.tycoelectronics.com/documents Stainless Steel Materials Ferrule Stainless Steel Body Nickel plated brass Coupling Nut Zinc Multimode ST Connector Kits Stainless Steel Ferrule Body Stainless Steel Ferrule Designation Boot Used With 25 Black (Bend Limiting) 3.0 mm Cable 5504008-3 Black (Long) 4.3 mm Cable 5504008-4 40 Black (Bend Limiting) 3.0 mm Cable 5504008-7 23 Black (Bend Limiting) 3.0 mm Cable -5504008-4 240 Black (Bend Limiting) 3.0 mm Cable -5504008-3 280 Black (Short) 3.0 mm Cable 4-5504008-6 6
ST Connectors Epoxy Type (Continued) Long Boot PVC Tubing 58.00 [2.283] Crimp Eyelet Bare Buffer Boot TYGON Tubing 78.00 [3.07] Connector Assembly Short Boot 47.00 [.850] HYTREL Tubing 56.00 [2.205] Protective Cover Right Angle Boot 62 TYGON is a trademark of Saint-Gobain Performance Plastics Corporation. HYTREL is a trademark of E.I. du Pont de Nemours and Company. ST Connector Component Selection Chart (Bulk Packaged) Fiber Type Connector Sub-Assembly Cable Size Crimp Eyelet Tubing Strain Relief *.6-2.0 mm 5097-3 550275-2 50329-X 2.4 mm 5097-3 550275-50228-X Singlemode - 2.4 mm 5097-3 550275-50457-X Ceramic Ferrule 5502578-2 Metal Body, Metal Nut 3.0 mm 5097-3 50228-X 3.0 mm 5097-3 50457-X 900 µm 5097-3 50279-7 5503628-X.6-2.0 mm 5097-3 550275-2 50329-X 2.4 mm 5097-3 550275-50228-X Multimode - 2.4 mm 5097-3 550275-50457-X Ceramic Ferrule 5492458-5 Metal Body, Metal Nut 3.0 mm 5097-3 50228-X 3.0 mm 5097-3 50457-X 900 µm 5097-3 50279-7 5503628-X.6-2.0 mm 5097-3 550275-2 50329-X 2.4 mm 5097-3 550275-50228-X Multimode - 2.4 mm 5097-3 550275-50457-X Ceramic Ferrule 550458-8 Metal Body, Polymer Nut 3.0 mm 5097-3 50228-X 3.0 mm 5097-3 50457-X 900 µm 5097-3 50279-7 5503628-X.6-2.0 mm 5097-3 550275-2 50329-X 2.4 mm 5097-3 550275-50228-X Multimode - 2.4 mm 5097-3 550275-50457-X Ceramic Ferrule 503676-5 Polymer Body, Metal Nut 3.0 mm 5097-3 50228-X 3.0 mm 5097-3 50457-X 900 µm 5097-3 50279-7 5503628-X.6-2.0 mm 5097-3 550275-2 50329-X 2.4 mm 5097-3 550275-50228-X Multimode - 2.4 mm 5097-3 550275-50457-X Ceramic Ferrule 503676-4 Polymer Body, Polymer Nut 3.0 mm 5097-3 50228-X 3.0 mm 5097-3 50457-X 900 µm 5097-3 50279-7 5503628-X * Strain relief dash number indicates color - see chart on page 63 for details.
ST Connectors Epoxy Type (Continued) Bend Limiting Short Right Angle Buffer Bend Limiting Strain Relief Bulk packages (00 pcs./package) Bend Limiting Short (3.0 mm) Right Angle Buffer Short (2.0 mm) Bend Limiting (2.0 mm) Black 50228-50457- 5502667-5503628- 50329-233454-4 Blue 50228-7 50457-5 5502667-2 233454-2 Beige 50457-4 -5503628-9 50329-4 233454-6 Connectors/Adapters/ Tooling & Accessories Free-hanging or panel mount design ST Coupling Receptacles Packaging Polymer Composite Single 5038- Multimode Bulk (000) 5038-2 Metal Single 50402- Multimode Bulk (50) 50402-2 Zirconia Ceramic Single 502750- Singlemode Bulk (50) 502750-2 ST Polymer Duplex Receptacle Metal/MM Only Beige 504662-2 Metal/MM Only Lt. Almond 504662- ST Active Device Mounts Multimode Designed to accept multimode TO-8, TO-46 and TO-52 active devices Nickel plated, die cast zinc Mount to PCB or through panel Includes positioning ring Packaging Height Standard height Single.40 550474- Low profile Single.280 5502585-2 Low profile Single (00).34 5504022-2 Low profile Bulk (50).34 5504022-3 63
FC Connectors One-piece connector body: Fastest assembly Compliant with: JIS C-5970 Pre-radiused ferrule Instruction Sheet 408-8674 http://www.tycoelectronics.com/documents Singlemode FC Connector Kits - Polymer Crimp Body Insertion Loss <0.2 db Typical Return Loss <-59 db Typical Durability 200 Cycles Singlemode FC Connector Kits Polymer Crimp Body Boot Blue Used With Individual Pack Bulk Pack Crimp Tool 3.0 mm Jacketed 5504649-5504649-8 5039-2.4 mm Jacketed 550494-2 492026-2.0 mm Jacketed 550495-2 492026-900 µm Buffer 5492052-5 N/A GR-326 Style FC Connector Kits - Metal Crimp Body Singlemode Insertion Loss <0.2 db Typical Return Loss <-59 db Typical Tested to GR-326 Tuning 6 position GR-326 Style Singlemode FC Connector Kits Metal Crimp Body Boot Used With Individual Pack Bulk Pack 3.0 mm Jacketed 4-98962-2 Crimp Tool () 4923- () 58532- Blue 2.4 mm Jacketed 6754264-5 6754264-6 58876-2.0 mm Jacketed 6754264-4 6754264-7 58876-900 µm Buffer 6754264-2 58876-3.0 mm - GR-326 Style FC Strain Reliefs Jacketed Cable GR-326 Style Black Red Beige Blue 3.0 mm No -550397-0 -550397-550397- 550397-2 2.4 mm No -550397-2 -550397-3 550397-3 550397-4 2.0 mm No 2-550397-3 2-550397-7 550397-5 550397-6 3.0 mm Yes 58849-2.6 mm - 2.4 mm Yes 58853-3 58853-5 58853-2 3.0 mm Angled 900 µm Short FC Strain Reliefs Angled Black Beige Blue 3.0 mm Simplex 278705-3 278705-2 278705-2.0 mm Simplex 374737-3 374737-2 374737-2.0 mm 45 Simplex 6457543-4 6457543-6457543-2 900 µm FC Strain Reliefs 900 micron Black Beige Blue Long (33 mm) 900 µm 6457493-3 6457493-9 6457493- Short (0 mm) 900 µm 6278309-6278309-2 GR-326 Style 900 µm 82884-2 82884-4 82884-64 GR-326 Style 900 µm
FC Connectors (Continued) FC Connector Component Selection Chart (bulk packaged) Simplex Connector Crimp Eyelet w/ Crimp Strain Relief Fiber Type Sub-Assembly Cable Size Heat Shrink Eyelet *.6-2.0 mm 637450-58853-X 6754264-8 Singlemode - GR-326 Style 2.4 mm 658889-58853-X 645726-5 3.0 mm 504973-3 58849-X 2.4 mm 503970-6 550397-X Singlemode 3.0 mm 503970-3 550397-X Polymer Crimp Body 5504649-9 900 µm 6457493-X (long) 6278309-X (short) 6374778-2.6-2.0 mm 637450-58853-X 2.4 mm 658889-58853-X Multimode - Ceramic Ferrule 3.0 mm 503970-3 550397-2 5504922-3 900 µm 6457493-9 (long) 6278309- (short) * Strain relief dash number indicates color - see page 64 for details. Connectors/Adapters/ Tooling & Accessories FC Adapters FC Simplex Square Flange Adapter - Metal Panel Keyway Cut-out Slot (Nom.) Metal Square Flange Std. 2.33 mm Ceramic Square Flange Std. 2.33 mm 550506-2 550506- FC Square Flange Adapter FC 8 mm/9 mm Dia. Round FC Simplex 8 mm/9 mm Dia. Round (D-Hole) Adapter - Metal Panel Cut-out Keyway Slot (Nom.) Metal (Copper) D-Hole Std. 2.33 mm 5504407- Ceramic D-Hole Std. 2.33 mm 5504407-3 Ceramic/APC D-Hole 2.05 mm Type R 5504407-8 Ceramic/APC D-Hole Prec. 2.02 mm 5504407-7 FC Simplex 8 mm Dia. Round (Double D-Hole) Adapter - Metal Panel Cut-out Keyway Slot (Nom.) Metal Double D-Hole Std. 2.33 mm 550403- FC 8 mm Dia. Round (Double D) 65
FC Connectors (Continued) Hybrid Adapters - SC/FC/ST Hybrid FC to ST Simplex Adapter - Metal Metal Electroless Nickel 5503640- Ceramic Electroless Nickel 5503640-2 FC to ST Simplex Adapter - Metal SC to FC Simplex Adapter - Plastic Metal Black 550287- Ceramic Blue 550287-4 SC to FC Simplex Adapter - Plastic SC to FC Simplex Adapter - Metal Metal Electroless Nickel 6278349- Ceramic Electroless Nickel 6278349-3 SC to FC Simplex Adapter - Metal Flangeless Simplex Adapter - Metal Metal Electroless Nickel 6278349-5 Ceramic Electroless Nickel 6278349-7 Flangeless SC to FC Simplex Adapter - Metal SC to FC Duplex Adapter - Metal Metal Electroless Nickel 6278050- Ceramic Electroless Nickel 6278050-3 SC to FC Duplex Adapter - Metal 66
FSD Connector Components Multimode Meets specifications of FDDI PMD - ANSI X3.66 Ceramic ferrules available Designed in polarization and user defined keying Insertion Loss 0.5 db typical Durability Ceramic Ferrules 500 cycles Nut Strain Relief Inner Crimp Ring Outer Crimp Ring Plug Dust Cover Type M Key Type B Key Type A Key Connectors/Adapters/ Tooling & Accessories Ceramic Instruction Sheet 408-9373 http://www.tycoelectronics.com/documents Light Duty Dual Inner Eyelets Plug Ferrule Assembly FSD Diameter Cable Type (µm) Replacement DUALAN Cable Light Duty DUALAN Cable Ferrules Single Packed Bulk Packed Single Packed Bulk Packed Ceramic Ferrules 25 550780-550780-3* 550205-550205-3* 550779- Termination Kit: 503746-6 * Bulk packed, 200 per package. Assembly Fixtures: with Polishing Tool: 50795-; without Polishing Tool: 502023- Field Keyable FSD Receptacles and Adapters Multimode Receptacles Metal Ceramic FSD to FSD 502806-2 502806-4 FSD to ST 502808-2 502808-4 67
ESCON Connector Components ESCON Connector Plug Multimode IBM Approved Simple field assembly Assembly Loss 0.2 db Typical Durability 200 cycles 25 µm Black DUALAN Cable 54928- DUALAN Cable 54928-2* * Bulk packed, 50 per package Termination Kit: 503746-6. Instruction Sheet 408-9808 http://www.tycoelectronics.com/documents ESCON Receptacles Multimode Black ESCON to ESCON 502825-2 ESCON to ST 502826-2 ESCON Assembly Fixture Kit Used to hold ferrules during assembly, epoxy curing, and polishing. Allows simultaneous polishing of both ferrules. Black Without Polishing Bushing 492236-2 Polishing Bushing 492269-68 ESCON is a trademark of IBM Corporation.
Industry compatible with 905 (FSMA-I) and 906 (FSMA-II) style connectors Terminates fiber sizes from 25 through 000 microns in diameter Design parameters conform to NATO and IEC interface standards Insertion Loss.3 db Typical Temperature Range -55 C to +05 C Durability 200 cycles Documentation Product Specification 08-4506 Instruction Sheet 408-9863 FSMA 905 & 906 Test Report 50-359 http://www.tycoelectronics.com/documents FSMA Products Multimode FSMA Connectors Ferrule Material Connector Body Material Fiber Nominal Jacket O.D. Diameter 3. mm 4.3 mm (µm) 905 906 905 25 5504566-550404- 5504567-40 5504566-2 -550404-0 5504567-2 23 5504566-7 Stainless Nickel-Plated 336-5504566-4 Steel Brass 720 3-5504567-9 000 3-5504566-0 050 3-5504566- 2-5504567-9 2050 3-5504567-3 Connectors/Adapters/ Tooling & Accessories Adapter Precision mating adapter for all FSMA connectors In-line splice or panel mount design FSMA Adapters Hex Flange, Stainless Steel 50049- Hex Flange, Stainless Steel, Counterbore, Sealed 50050- Fixed Flange, Nickel-Plated Brass 5504026- In-Line, Stainless Steel 504028- In-Line, Nickel-Plated Brass, Counterbore 5504030- In-Line, Stainless Steel, Counterbore, Short 50403- Active Device Mount Designed to house TO-8, TO-46, and TO-52 devices Constructed of nickel plated die cast zinc alloy or stainless steel Mounts to PC board or through panel FSMA Active Device Mounts PC Mount Receptacle, Die Cast 550236- PC Mount Receptacle, Die Cast, Bulk Packaged 550236-2 PC Mount Receptacle, Stainless Steel 50055-69