BG-S6 BATTERY GRIP Designed for the Sony a9 and a7 III Series Mirrorless Cameras
Thank you for choosing Vello. The Vello BG-S6 is designed for the Sony a9 and a7 III Series mirrorless cameras. It accepts two NP-FZ100 batteries, essentially doubling your camera s runtime. The grip provides a shutter release, front and rear dials, C1 and C2 function buttons, On/Off power switch, AF-ON, AEL, as well a joystick Multi-Selector, making it comfortable to shoot in portrait orientation. Please read through this entire manual before using the BG-S6 battery grip. 2
Precautions 1. The BG-S6 should be used only with compatible devices specified in this manual. 2. Use only with the batteries and battery holders recommended in this manual. 3. If you notice smoke, an unusual smell, or noise from the battery pack, discontinue use immediately. Remove the batteries, and contact Vello Customer Service. 4. The battery level may not display properly if batteries are installed before mounting the grip. 5. Remove the batteries from the grip when not in use. 6. Do not attempt to disassemble. 7. Avoid exposing this product to water or extreme humidity, and keep it in a dry, cool place. 8. Keep out of reach of children. 9. All images are for illustrative purposes only. OVERVIEW INTRODUCTION 3 ASSEMBLY
Overview 1 17 18 2 3 4 5 7 6 8 10 11 12 13 14 15 16 20 19 9 21 22 4
1 Power contacts 2 C1 and C2 Buttons* Custom function buttons. 3 Strap mount 4 On/Off Power Switch Power switch for the battery grip and your camera. Important! When switching the grip s On/Off power switch to the Off position, it will turn off the power to the camera. 5 Shutter release button* 6 Front dial* 7 Nonslip grip 8 1/4-20 tripod socket 9 Battery tray compartment 10 Battery tray lock 11 Battery tray 12 Locking wheel 13 Multi-selector joystick* 14 AF-ON / Image zoom* 15 AEL / Image index* 16 Rear dial* 17 Camera battery door holder 18 1/4-20 camera mounting screw 19 Battery slot 1 20 Slot 1 contacts 21 Battery slot 2 22 Slot 2 contacts * These controls perform the same function as their on-camera equivalents and are affected by changes to the Custom Settings menu. See your camera manual for details. 5 ASSEMBLY OVERVIEW INTRODUCTION
Attaching the Grip 1. Ensure that the camera power is turned off, and the Control Lock on the BG-S6 is in the Off position. 2. Open the camera s battery chamber, and remove the battery. Then disconnect the battery door from the camera, using the latch. 3. Insert the camera s battery door into the grip s battery door holder, using the door latch. Then lock the door in place. 6
4. Insert the grip s power contacts into the camera s battery chamber, and align the camera mounting screw with the camera s tripod socket. 7 5. Rotate the locking wheel counterclockwise until it s firmly tightened. ASSEMBLY OVERVIEW INTRODUCTION
Inserting the Batteries 1. Lift and rotate the battery tray s lock counterclockwise, and remove the battery tray from the grip. 2. Align the contacts of the first battery and slot 1. Insert the battery toward the contacts, and push down to lock the battery in place. 3. Align the contacts of the second battery and slot 2. Slide the battery in, and press down until it clicks. 8
4. Insert and lock the battery tray inside the battery grip. 5. Switch on your camera and turn the grip s On/Off power switch to the On position to power up your camera and the grip. 9 Note: When removing the grip, turn off the camera s power and the grip s On/Off power switch, then remove the batteries. ASSEMBLY OVERVIEW INTRODUCTION
Removing the Batteries 1. Turn the camera and battery grip power off. Lift and rotate the battery tray lock counterclockwise, and remove the battery tray from the grip. 2. Remove the batteries 1 and 2 by lifting the batteries out of the tray. 10
Battery Status When two batteries are installed in the BG-S6, your camera will automatically select the battery with lower power remaining. The battery level will appear on your camera s LCD with the battery level percentage for only the battery in use. When the battery is depleted, your camera will switch to the other battery in the grip. Important: When storing your Sony camera with the grip attached, turn your camera off and turn the grip s On/ Off power switch to the Off position. Specifications Power source Operating temperature Dimensions (H W D) Weight Up to two NP-FZ100 rechargeable Li-ion batteries 32 F to 104 F (0 C to 40 C) 4.25 4.9 2.5 in. (10.8 12.6 6.5 cm) 9.2 oz. (261 g) excluding batteries 11 ASSEMBLY OVERVIEW INTRODUCTION
ONE-YEAR LIMITED WARRANTY This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function. This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state. To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise authorization ( RMA ) number, and return the defective product to Vello along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser s own risk and expense. For more information or to arrange service, visit www.vellogear.com or call Customer Service at 212-594-2353. Product warranty provided by the Gradus Group. www.gradusgroup.com VELLO is a registered trademark of the Gradus Group. 2018 Gradus Group LLC. All Rights Reserved. www.vellogear.com All other trademarks are the property of their respective owners. GG3