AUDIO MANAGEMENT SYSTEM Network-enabled for extended system installations in various locations and for efficient centralized control, the SX-2000 Series sets a new standard for high-performance, no-compromise systems.
For creating ultra-reliable Introducing a new scalable system that makes it easy to configure versatile and highly effective PA systems. Central control allows SX-2000 Series system components to be distributed over different locations, making a system ideal for large-scale installations as well as highly efficient local systems. As any SX-2000 Series-configured system is fully networkable and highly reliable, a user is able to create a system perfectly matched to particular requirements at a more attractive price. SX-2000SM System Manager SX-2000SM can be used in combination with an optional audio input unit, audio output unit, and remote microphone of the SX-2000 Series to make up a complete matrix system and can perform audio signal routing and priority control for the entire system. The SX-2000SM itself is equipped with 8 control inputs, 8 control outputs, failure status outputs, failure data inputs/switches, access indicators mode indicators and failure indicators enabling a wide rage of controls and status monitoring. Each control can be performed by way of a CF card inserted into the SX-2000SM unit. Operations of the entire system can be recorded and their contents stored on a CF card as an operation log. The SX-2000SM also features two power inputs making possible the creation of a dual-redundant power system. Audio Input Unit The is an audio input of the matrix system. Multiple units can be decentralized in a whole system. It features modular construction that allows it to handle from two to eight inputs per unit. Audio signals are transmitted digitally to the audio output unit, but an analog audio output function (1 channel) enables simultaneous all-zone calls for use in emergency situations. Audio input levels (post-fader levels) are indicated on the level meters provided for each input channel. Volumes can be adjusted for each channel using the volume controls on the front panel or the SX-2000 software. The volume controls can be locked using the SX-2000 software. Any input channel can be monitored using the internal speaker. It is equipped with two power inputs, allowing for a redundant power system. The has two power inputs and can support a dual-redundant power supply system. Audio Output Unit The is an audio output of the matrix system Multiple units can be decentralized in a whole system. It is equipped with eight audio outputs and two inputs which can be mixed and output. It is also equipped with eight control inputs, and eight control outputs. The receives audio signals from the audio input unit via digital transmission, but an analog audio input function (1 channel) enables simultaneous all-zone calls for use in emergency situations. Audio output levels (post-fader levels) are indicated on the level meters provided for each output channel. Volumes can be adjusted for each channel using the volume controls on the front panel or the SX-2000 software. The volume controls can be locked using the SX-2000 software. Any output channel can be monitored using the internal speaker. It is equipped with an emergency audio input and a 24V emergency cutoff input. The has two power inputs and can support a dual-redundant power supply system.
large scale PA systems. RM-200S Remote Microphone The RM-200S is a remote microphone designed for TOA's Matrix System. It is equipped with: 13 function switches (which can be used to select individual zones or zone groups), a covered switch, and corresponding indicators. RM-210 Remote Microphone Extension The RM-210 is an extension unit for increasing the number of function keys of RM-200S, Remote Microphones. (Rear) Remote Microphone Interface Module The is a dedicated remote microphone module for the SX-2000 Series audio input unit and can be used to connect two remote microphones. Input sensitivity can be adjusted. D-921E Mic/Line Input Module (24 bits Monaural Type) The D-921E is a dedicated 2-channel microphone/line input module designed for use with the and equipped with removable terminal block type connectors. D-921F Mic/Line Input Module (24 bits Monaural Type) The D-921F is a dedicated 2-channel microphone/line input module designed for use with the and equipped with XLR connectors. D-922E Mic/Line Input Module (20 bits Monaural Type) The D-922E is a dedicated 2-channel microphone/line input module designed for use with the and equipped with removable terminal block type connectors. D-922F Mic/Line Input Module (20 bits Monaural Type) The D-922F is a dedicated 2-channel microphone/line input module designed for use with the and equipped with XLR connectors. D-936R Stereo Select Input Module The D-936R is a dedicated 4 stereo input module designed for use with the and equipped with standard RCA pin jacks.
Versatile installation suits a wide range of applications Optimal system to cover multi-locations and various buildings for installations in airports, railway stations, factories and many others. Compatible with centralized/local systems as found in shopping malls having multiple tenants. Convenient system component distribution to different locations through a network Uses commercially available switching hub (certain specifications are required).* Uses commercially available cables.* CAT-5 (100 Base-TX). Optical fiber (100 Base-FX). *Please contact our dealers. Full digital signal processing for improved performance Digital signal processing allows public announcements with high fidelity 48 khz sampling frequency and 24-bit PCM AD/DA conversion. Available audio inputs/outputs. Inputs: 64 Outputs: 128 Maximum 16 ch simultaneous broadcasting channels. Available control 136 inputs and 136 outputs. Compatible with various program sources including: CD players, cassette tape players, digital public addressing devices, microphones, emergency broadcast microphones and intercoms. Multipurpose remote control Makes it easy to configure broadcast zones independently or by groups and allows programming as desired. Automatic Mic-Off function prevents inappropriate microphone use when inadvertently left on. Settings for pre- and end-chimes are possible as well as selecting preferred TALK key operation method. Fully operable on DC power The complete system including power amplifier is able to operate solely on DC power. Failsafe power with redundancy allows uninterrupted system operation if a power source fails. Power failure measures No costly UPS needed. Battery use provides inexpensive power failure solution. Two or more batteries can be connected. No system operation interruption while performing battery maintenance. Redundant dual power supply Each device equipped with dual power inputs. System continues to operate in the case of one power source failure. Power sources may be split at the circuit breaker on the power switchboard, allowing uninterrupted system operation, should the commercial power supply fail. Fully redundant dual network Fully redundant audio system. Broadcast ability integrity maintained even with cable failure, short circuit or switching hub malfunction. Additional analog backup The audio system also incorporates analog backup features. Includes analog backup line signal from microphone to power amplifier. Simultaneous broadcasting possible even in case all digital systems including the CPU and network go down.
Outstanding user friendliness System operation. At-a-glance system status confirmation with the level meter display. Volume adjustment controls simplify operations. Reduced power consumption Power consumption reduced an increase in power supply efficiency. Software setting Parameter settings via browser-type menus do not require dedicated software, allowing parameters to be easily configured. Parameter settings including fade-in/fade-outs for various input sources, priority level assignment of multiple input sources, and operation logs (up to 10,000) can be conveniently stored in a CF card. Security-conscious Operation lock on the main unit. Key-lock on the operating unit prevents unauthorized access or tampering. Quick maintenance. Parameter settings storable on CF cards. Current parameter settings are instantly restored if the unit has to be replaced. Network connectivity simplifies wiring requirements (fewer cables required) and speeds up connections. Future expandability Easy expansion simply by adding more units. Easy connectivity with minimal wiring requirements. Compact and space saving Multi-channel amplifier zone installation for dedicated amplifier/ channel usage. System configuration suited for use in multiple zones. Smaller dimensions.
Centralized Control System Example (Factory) CR-413 PF-013B VP-2421 VP-2421 PF-013B EV-20R EV-20R Office Building Truck Terminal SX-2000MS PF-013B Production Line A VP-2241 PF-013B PF-013B PF-023B Production Line B R&D Building Production Line C Storehouse Office Building Office Building R&D Building Production Line A Production Line B VP-2241 Production Line A Truck Terminal SX - 2000AO VP-2241 Production Line B RM-200S VP-2241 Production Line C Auto Announcement Machine D-922E Storehouse VX-200PS Truck Terminal Power supply (DC 24V) SX LINK (EtherNet, 100Base/T or 100Base/FX) Audio SX-2000SM
Distributed Control System Example (University) Campus A Optical fiber network Campus C Campus B Campus A Campus C SX-2000SM VX-200PS Auto Announcement Machines D-921F D-921F SX - 2000AO Auto Announcement Machines D-921F VX-200PS Optical fiber network Campus B DA-250FH Power supply (DC 24V) SX LINK (EtherNet, 100BASE-T or 100BASE-FX) Audio DA-250FH D-921F VX-200PS
SPECIFICATIONS Model No. Power Source Current Consumption SX Link Network I/F 2 100BASE-TX circuits Matrix System Specification Bus: 16 Audio input: Max. 64 ch Audio output: Max. 128 zones Contact input: Max. 136 Contact output: Max. 136 Priority control: 256 steps Event log: Max. 10,000 events SX-2000SM System Manager 24V DC Two power inputs construction enables dual- redundant power supply. Under 0.8A (when operated on 24V DC) Matrix System Configuration Connectable No: Max. 8 units Connectable No.: Max. 16 units Connectable RM-200S No.: Max. 32 units (up to 4 RM-200S per ) Connection Cable/Device Shielded Category 5 twisted pair cable for LAN (CAT5-STP) LAN Network I/F 1 10 BASE-T/100 BASE-TX circuit Network Protocol TCP/IP Connection Cable Shielded Category 5 twisted pair cable for LAN (CAT5-STP) Analog Link Input/Output Connector Output: 2 Connection Cable Shielded Category 5 twisted pair cable for LAN (CAT5-STP) Failure Data Input 3 inputs (ACK/RESET/LAMP TEST) Failure Data Output 4 outputs (CPU FAULT/GENERAL FAULT/CPU OFF/BUZZER) Control Input 8 inputs Control Output 8 outputs Memory Card Insertion slot: 1 (supplied CF card (128MB)) Model No. Power Source Current Consumption Audio Input Audio Input Characteristic Audio Input Unit 24V DC Two power inputs construction enables dual- redundant power supply. Under 1.35A (when operated on 24V DC) 8 inputs, module construction (max. 4 modules) Sampling frequency: 48kHz SX Link Network I/F 2 100BASE-TX circuits Connection Cable/Device Shielded Category 5 twisted pair cable for LAN (CAT5-STP). Analog Link Input/Output Connector Input: 1 input Output: 1 output Connection Cable Shielded Category 5 twisted pair cable for LAN (CAT5-STP) Model No. D-921E Mic/Line Input Module (24 bits Monaural Type) Input 2 channels, Mic/Line changeable Mic: 50/ 36dB*, 4.7kΩ, electronically-balanced Line: 10/+4dB*, 10kΩ, electronically-balanced Phantom power supply Connector Removable Terminal Block connector A/D Converter 24 bits Sampling Frequency 48kHz Frequency Response 20 20,000Hz, ±1 db Dynamic Range Over 100 db Total Harmonic Distortion Under 0.05% Model No. D-921F Mic/Line Input Module (24 bits Monaural Type) Input 2 channels, Mic/Line changeable Mic: 50/ 36dB*, 4.7kΩ, electronically-balanced Line: 10/+4dB*, 10kΩ, electronically-balanced Phantom power supply Connector XLR connector A/D Converter 24 bits Sampling Frequency 48kHz Frequency Response 20 20,000Hz, ±1 db Dynamic Range Over 100 db Total Harmonic Distortion Under 0.05% Model No. D-922E Mic/Line Input Module (20 bits Monaural Type) Input 2 channels, 50/ 36/ 10/+4dB* (Selectable with, the DIP switch), 4.7kΩ, electronically-balanced Phantom power supply Ground lift switch Connector Removable Terminal Block connector A/D Converter 20 bits Sampling Frequency 48kHz Frequency Response 20 20,000Hz, ±1 db Dynamic Range Over 85 db Total Harmonic Distortion Under 0.2% Model No. D-922F Mic/Line Input Module (20 bits Monaural Type) Input 2 channels, 50/ 36/ 10/+4dB* (Selectable with the DIP switch), 4.7kΩ, electronically-balanced Phantom power supply Ground lift switch Connector XLR connector A/D Converter 20 bits Sampling Frequency 48kHz Frequency Response 20 20,000Hz, ±1 db Dynamic Range Over 85 db Total Harmonic Distortion Under 0.2% Model No. D-936R Stereo Select Input Module Input 4 stereo inputs, 10dB*, 10kΩ A/D Converter 24 bits Sampling Frequency 48kHz Frequency Response 20 20,000Hz, ±1 db Dynamic Range Over 100 db Total Harmonic Distortion Under 0.05% Model No. Remote Microphone Interface Module Audio Input 2 inputs, 0dB* 1 Audio Input Characteristic Sampling frequency: 48kHz A/D converter: 24bits Level Control Audio input (0 to +12dB) *0dB = 0.775V * 1 0dB = 1V
Model No. Audio Output Unit Power Source 24V DC Two power inputs construction enables dual- redundant power supply. Current Consumption Under 0.79A (when operated on 24V DC) Audio Output 8 outputs, 0dB* 1, suitable load: 600Ω or above Audio Output Characteristic Frequency response: 20 20,000Hz Sampling frequency: 48kHz D/A converter: 24 bit Emergency Line Input Emergency signals switched and sent to Input 1 (H, C, E) by relay Emergency-Cutoff 24V Input 1 input, input current: under 5mA SX Link Network I/F 2 100 BASE-TX circuits Connection Cable/Device Shielded Category 5 twisted pair cable for LAN (CAT5-STP) Analog Link Input/Output Connector Input: 1 input Output: 1 output Connection Cable Shielded Category 5 twisted pair cable for LAN (CAT5-STP) Control Input 8 inputs Control Output 8 outputs * 1 0dB = 1V Model No. RM-200S Remote Microphone Power Source 24V DC Current Consumption Under 290mA Audio Output 0dB*, 600Ω External Microphone Input 40dB*, 2.2kΩ Distortion Under 1% Frequency Response 100 20,000Hz S/N Ratio Over 60dB Microphone Unidirectional electret condenser microphone with AGC Chime Built inside Level Control Microphone sensitivity control, monitor speaker volume control, chime Connection Cable Main line: Shielded CPEV cable Branch line: Shielded Category 5 twisted pair cable for LAN (CAT5-STP) No. of Connectable Max. 4 units Expansion Monitor Speaker Built inside Dimensions 190 (W) 76.5 (H) 215 (D)mm Model No. RM-210 Remote Microphone Extension Current Consumption 20mA max. (in terms of RM-200M's DC power input) Connection Connection by way of dedicated cable Number of Function Keys 10 Dimensions 110 (W) 76.5 (H) 215 (D)mm SYSTEM EQUIPMENT (60 W-by-4 channels) (120 W-by-2 channels) VP-2241 (240 W-by-1 channel) VP-2421 (420 W-by-1 channel) Power Amplifier Power Amplifier uses the VP-200VX Power Amplifier Input Module per channel. Power Source: 28V DC Current Consumption (EN60065): /: 4.8A in total, VP-2241: 4.8A, VP-2421: 7.6A Rated Output Power: : 60W 4, : 120W 2, VP-2241: 240W, VP-2421: 420W Output Voltage/Impedance: : 100/167Ω, 70V/83Ω, 50V/41Ω : 100/83Ω, 70V/41Ω, 50V/21Ω VP-2241: 100/41Ω, 70V/21Ω, 50V/10Ω VP-2421: 100/24Ω, 70V/12Ω, 50V/6Ω Number of Module Slot: : 4, : 2, VP-2241/VP-2421: 1 Output: Power amplifier output (speaker line) Frequency Response: 40 16,000Hz Distortion: Under 1% S/N Ratio: 80dB Emergency Power Supply The Emergency Power Supply Unit supplies the DC power to each equipment in the SX-2000 system by connecting the VX-200PS Power Supply Unit. Power Source AC mains, 50/60Hz Power Consumption 240W max. Charging Method Trickle charging Charging Current 5A max. Charging Output Voltage 27.3V ±0.3V Power Supply Input 6 DC Power Output 6 VX-200PS Power Supply Unit The VX-200PS Power Supply Unit is mounted in the VX-2000PF Power Supply Frame when in use. Power Source: AC mains, 50/60Hz Power Consumption: 580W PS OUT: Rated output: 210W (29V, 7.25A) 2 Peak output: 400W 2 VX-2000PF Power Supply Frame The VX-2000PF permits the VX-200PS Power Supply Unit to be mounted in an equipment rack. Up to 3 VX-200PS units can be installed in the unit. DA-250FH Multichannel Power Amplifier The DA-250FH is a 4-Channel Digital Amplifier designed for 100V line high-impedance distribution and features lightweight, compact, high power output, and high efficiency. Power Source: Amplification System: Power Consumption: Input: Rated Output: Frequency Response: Total Harmonic Distortion: S/N Ratio: Crosstalk: Cooling: *0dB = 0.775V AC mains, 50/60HZ Digital Class D 200W 4 circuits, +4dB*, 10kΩ 4 channels: 250W 4 (40Ω) 50 20,000Hz 0.1% (1kHz) 100dB 70dB Forced air cooling
Human society with Sound & Communication TOA Corporation www.toa.co.jp Specifications are subject to change without notice. Printed in Japan (0610) 833-61-713-60 u