Specialist Level Certification JNCIS-ENT; 5 Days; Instructor-led Course Description The JNCIS-ENT Certification BootCamp course is a 5-day Blended-Learning event that covers technology aspects that meet the JUNOS Specialist Certification tier for the ENTERPRISE ENGINEER. Students attending this course will take part in 4 courses as part of the certification, including a video-based Junos introduction, then Routing and EX Switching technologies. This course prepares students for the new JNCIS-ENT Certification exam, whose topics are based on the content of these courses: IJOS JRE JEX JIR Course Objectives Perform initial configuration tasks Configure and monitor static routing Configure and monitor OSPF Write and apply a routing policy Write and apply a firewall filter Implement and verify operation of CoS Configure and monitor static, aggregate, and generated routes Configure and share routes between routing instances Implement Layer 3 load balancing Configure and monitor OSPF Configure and monitor BGP Describe IP tunneling concepts and applications Configure and monitor GRE and IP-IP tunnels Configure and monitor H-A Configure and monitor routing for IPv6 environments Configure and monitor IS-IS Define Layer 2 Switching Enabling Layer 2 Switching Operations Configuring and Monitoring VLANs Spanning Tree Protocol (STP) Rapid Spanning Tree Protocol (RSTP) Configure and monitor STP and RSTP Dynamic ARP Inspection (DAI)
DHCP Snooping Link Aggregation Groups (LAGs) Redundant Trunk Groups (RTG) Virtual Chassis Audience Network engineers, technical support personnel, reseller support engineers, and others responsible for implementing and/or maintaining the Juniper Networks products covered in this course. Prerequisites Students should have basic networking knowledge and an understanding of the OSI model and the TCP/IP protocol suite. Course Outline Day 1 IJOS Chapter 1: Course Introduction Chapter 2: Junos Operating System Fundamentals The Junos OS Traffic Processing Platforms Running the Junos OS Chapter 3: User Interface Options User Interface Options The Junos CLI: CLI Basics The Junos CLI: Operational Mode The Junos CLI: Configuration Mode Chapter 4: Initial Configuration Factory-Default Configuration Initial Configuration Interface Configuration Chapter 5: Secondary System Configuration User Configuration and Authentication System Logging and Tracing Network Time Protocol Archiving Configurations SNMP Chapter 6: Operational Monitoring and Maintenance Monitoring Platform and Interface Operation Network Utilities Maintaining the Junos OS Password Recovery Classroom Day 1 (JRE)
Chapter 2: Routing Fundamentals Routing Concepts: Overview of Routing Routing Concepts: The Routing Table Routing Concepts: Routing Instances Static Routing Dynamic Routing Chapter 3: Routing Policy Routing Policy Overview Case Study: Routing Policy Chapter 4: Firewall Filters Firewall Filters Overview Case Study: Firewall Filters Unicast Reverse-Path-Forwarding Checks Appendix A: Class of Service Day 2 (JIR) Chapter 2: Protocol-Independent Routing Static Routes Aggregated Routes Generated Routes Martian Addresses Routing Instances Chapter 3: Load Balancing and Filter-Based Forwarding Overview of Load Balancing Configuring and Monitoring Load Balancing Overview of Filter-Based Forwarding Configuring and Monitoring Filter-Based Forwarding Chapter 4: Open Shortest Path First Overview of OSPF Adjacency Formation and the Designated Router Election OSPF Scalability Configuring and Monitoring OSPF Basic OSPF Troubleshooting Day 3 JIR Chapter 5: Border Gateway Protocol Overview of BGP BGP Attributes IBGP Versus EBGP Configuring and Monitoring BGP
Chapter 6: IP Tunneling Overview of IP Tunneling GRE and IP-IP Tunnels Implementing GRE and IP-IP Tunnels Chapter 7: High Availability Overview of High Availability Networks GR Graceful RE Switchover Nonstop Active Routing BFD VRRP Day 4 JEX Chapter 2: Layer 2 Switching Ethernet Bridging Basics Terminology and Design Considerations Overview of Enterprise Switching Platforms Enabling and Monitoring Layer 2 Switching Operations Chapter 3: Virtual Networks Overview of VLANs Configuring and Monitoring VLANs Voice VLAN Native VLAN Routed VLAN Interfaces Chapter 4: Spanning Tree Spanning Tree Protocol Rapid Spanning Tree Protocol Configuring and Monitoring STP and RSTP Protection Features: BPDU Protection Protection Features: Loop Protection Protection Features: Root Protection Day 5 JEX Chapter 5: Port Security MAC Limiting DHCP Snooping Dynamic ARP Inspection (DAI) IP Source Guard Chapter 6: Device Security and Firewall Filters Storm Control Firewall Filters
Chapter 7: Virtual Chassis Overview of Virtual Chassis Configuring and Monitoring a Virtual Chassis Chapter 8: High Availability Features Overview of High Availability Networks Link Aggregation Groups Redundant Trunk Groups