Log Command Reference

Similar documents
Configuration Commands. Generic Commands. description. shutdown SR OS System Management Guide Page 399. Event and Accounting Logs

Configuration Commands. Generic Commands. description. shutdown XRS System Management Guide Page 449. Event and Accounting Logs

External Alerting for Intrusion Events

Troubleshooting Tools. Tools for Gathering Information

SNMP Commands CHAPTER

Logging. About Logging. This chapter describes how to log system messages and use them for troubleshooting.

External Alerting with Alert Responses

Configuring Embedded Event Manager

Platform Settings for Firepower Threat Defense

Serviceability. Access Cisco VVB Serviceability. Alarms

Chapter 6 Global CONFIG Commands

Configuring Security with CLI

EEM Action Tcl Command Extension

Syntax instance instance [interface interface-name [vrid virtual-router-id] instance interface interface-name vrid virtual-router-id ipv6

Implementing and Monitoring Alarms and Alarm Log Correlation

Application Assurance HTTP In Browser Notification

Configuring System Message Logging

The Security feature available on the ME 1200 Web GUI allows you to set the security configurations for

Operation Manual SNMP-RMON H3C S3610&S5510 Series Ethernet Switches. Table of Contents

2V] Chapter 2 Catalyst 3560 Switch Cisco IOS Commands shutdown. This command has no arguments or keywords.

For complete syntax and usage information for the commands used in this chapter, see the Cisco IOS Configuration Fundamentals Command Reference

IP Services Commands. Network Protocols Command Reference, Part 1 P1R-95

Utilities. Introduction. Working with SCE Platform Files. Working with Directories CHAPTER

Configuring Embedded Event Manager

Information about Network Security with ACLs

RSA NetWitness Logs. Trend Micro OfficeScan and Control Manager. Event Source Log Configuration Guide. Last Modified: Thursday, November 30, 2017

Configuring SNMP. Understanding SNMP CHAPTER

Implementing and Monitoring Alarms and Alarm Log Correlation

IS-IS Configuration Commands. Generic Commands. shutdown IS-IS XRS Routing Protocols Guide Page 533. Syntax [no] shutdown

Network security session 9-2 Router Security. Network II

Ethernet Switch ZyNOS 4.0

0] Chapter 2 Cisco ME 3400E Ethernet Access Switch Cisco IOS Commands shutdown. This command has no arguments or keywords.

Cisco IOS Embedded Event Manager

Equivalencia. - Cisco vs Huawei -

SNMP CEF-MIB Support

Set Threshold Rules. Threshold Rules. This section explains how to customize alarms and events to suit your business needs.

Performance Monitor Administrative Options

Access List Commands

RSA NetWitness Logs. IBM Domino. Event Source Log Configuration Guide. Last Modified: Thursday, October 19, 2017

SNMP Notifications. SNMP Notifications. Description of the SNMP notifications sent by the UBIqube SOC 1 / 7

Configuring System Message Logging

MVPN: Inter-AS Option B

Configuring SNMP. About SNMP. SNMP Functional Overview

Cisco.Actualtests v New Questions.by.Nev.32q.vce

Configuring System Message Logging

This section explains how to customize alarms and events to suit your business needs.

WiFi Command Reference

TSM Studio Server Alerting User Guide

Configuring IP SLAs LSP Health Monitor Operations

Object Groups for ACLs

IP Services Commands. Cisco IOS IP Command Reference, Volume 1 of 3: Addressing and Services IP1R-157

Cisco Prime Collaboration Deployment Configuration and Administration

Restrictions for SNMP use on Cisco IOS XR Software

Configure Site Network Settings

Configure SNMP. Understand SNMP. This chapter explains Simple Network Management Protocol (SNMP) as implemented by Cisco NCS 4000 series.

Configuring System Message Logs

Three interface Router without NAT Cisco IOS Firewall Configuration

FiberstoreOS. Network Management Configuration Guide

Table of Contents. 2 MIB Style Configuration 2-1 Overview 2-1 Setting the MIB Style 2-1 Displaying and Maintaining MIB 2-1

IBM Security QRadar Version Architecture and Deployment Guide IBM

FiberstoreOS. Network Management Command Line Reference

Table of Contents. 2 MIB Style Configuration 2-1 Setting the MIB Style 2-1 Displaying and Maintaining MIB 2-1

Chapter 6 Global CONFIG Commands

show aaa servers sg show aaa servers sg sg-name Syntax Description

FiberstoreOS. Network Management Command Line Reference

Configuring VoIP Call Setup Monitoring

access-list permit deny no access-list access-list permit deny 213

Configuring System Message Logs

Alcatel-Lucent 7705 SERVICE AGGREGATION ROUTER OS RELEASE 5.0 SYSTEM MANAGEMENT GUIDE SYSTEM MANAGEMENT GUIDE

Embedded Event Manager System Events and Configuration Examples

Quick Start Guide. Version R92. English

Access List Commands

Application Notes for CA NetQoS Unified Communications Monitor with Avaya Aura TM Communication Manager - Issue 1.0

User s Guide. SNMPWEBCARD Firmware Version Revision 3

BGP Route Reflector Commands

Working With Configuration Files

Configuring System Message Logging

B-SX600 SERIES MPS1 Printserver Manual. Ver

Configuring NTP. Information About NTP NTP. This chapter describes how to configure the Network Time Protocol (NTP) on Cisco MDS 9000 Series switches.

Configuring System Message Logs

Configuring the Embedded Event Manager

Understanding Zone and DoS Protection Event Logs and Global Counters

NETCONF Protocol. Restrictions for the NETCONF Protocol. Information About the NETCONF Protocol

Object Groups for ACLs

Avi Networks Technical Reference (16.3)

Chapter H through R. loss (PfR), page 28. load-balance, page 23 local (PfR), page 24 logging (PfR), page 26

Defining IPsec Networks and Customers

BGP Commands. Network Protocols Command Reference, Part 1 P1R-355

Configuring Embedded Resource Manager-MIB

45 10.C. 1 The switch should have The switch should have G SFP+ Ports from Day1, populated with all

Configuring Logging. Information About Logging CHAPTER

FiberstoreOS. Network Management Configuration Guide

A Commands CHAPTER. Commands that are identical to those documented in the Cisco IOS software documentation have been removed from this chapter.

Cisco Small Business SF200E Series Advanced Smart Switches

Embedded Event Manager System Events and Configuration Examples

ADMINISTRATION GUIDE Cisco Small Business 200 Series Smart Switch Administration Guide Release 1.1

Configuring Cisco Performance Monitor

Accessing SGM Data from a Web Browser

User s Manual. Version 5

Viewing System Status, page 404. Backing Up and Restoring a Configuration, page 416. Managing Certificates for Authentication, page 418

Transcription:

Event and Accounting Logs Log Command Reference Command Hierarchies Log Command Reference on page 439 Accounting Policy Commands on page 440 Custom Record Commands on page 441 File ID Commands on page 444 Event Filter Commands on page 444 Event Handling System (EHS) Commands on page 445 Event Trigger Commands on page 445 Log ID Commands on page 446 SNMP Trap Group Commands on page 446 Syslog Commands on page 447 Show Commands on page 448 Clear Command on page 448 Log Configuration Commands app-route-notifications cold-start-wait seconds no cold-start-wait route-recovery-wait seconds no route-recovery-wait event-control application-id [event-name event-number] [generate [severity-level] [throttle] [specific-throttle-rate events-limit interval seconds disable-specific-throttle] event-control application-id [event-name event-number] suppress no event-control application [event-name event-number] [no] event-damping route-preference primary {inband outband} secondary {inband outband none} no route-preference throttle-rate events [interval seconds] no throttle-rate 7950 XRS System Management Guide Page 439

Command Hierarchies Accounting Policy Commands collection-interval minutes no collection-interval accounting-policy acct-policy-id no accounting-policy acct-policy-id [no] auto-bandwidth [no] default [no] include-router-info [no] include-system-info record record-name no record [no] shutdown to file log-file-id Page 440 7950 XRS System Management Guide

Event and Accounting Logs Custom Record Commands accounting-policy acct-policy-id [interval minutes] no accounting-policy acct-policy-id collection-interval minutes no collection-interval [no] custom-record [no] aa-specific aa-sub-counters [all] no aa-sub-counters [no] long-duration-flow-count [no] medium-duration-flow-count [no] short-duration-flow-count [no] total-flow-duration [no] total-flows-completed-count from-aa-sub-counters [all] no from-aa-sub-counters all [no] flows-active-count [all] [no] flows-admitted-count [no] flows-denied-count [no] forwarding-class [no] max-throughput-octet-count [no] max-throughput-packet-count [no] max-throughput-packet-count [no] octets-admitted-count [no] octets-denied-count [no] packets-admitted-count [no] packets-denied-count to-aa-sub-counters [all] to-aa-sub-counters all [no] flows-active-count [all] [no] flows-admitted-count [no] flows-denied-count [no] forwarding-class [no] max-throughput-octet-count [no] max-throughput-packet-count [no] max-throughput-packet-count [no] octets-admitted-count [no] octets-denied-count [no] packets-admitted-count [no] packets-denied-count [no] override-counter override-counter-id e-counters [all] no e-counters [no] in-profile-octets-discarded-count [no] in-profile-packets-discarded-count [no] out-profile-octets-discarded-count 7950 XRS System Management Guide Page 441

Command Hierarchies [no] out-profile-packets-discarded-count i-counters [all] no i-counters [no] in-profile-octets-discarded-count [no] in-profile-packets-discarded-count [no] out-profile-octets-discarded-count [no] out-profile-packets-discarded-count [no] queue queue-id e-counters [all] no e-counters [no] in-profile-octets-discarded-count [no] in-profile-packets-discarded-count [no] out-profile-octets-discarded-count [no] out-profile-packets-discarded-count i-counters [all] no i-counters [no] all-octets-offered-count [no] all-packets-offered-count [no] high-octets-discarded-count [no] high-octets-offered-count [no] high-packets-discarded-count [no] high-packets-offered-count [no] low-octets-discarded-count [no] low-packets-discarded-count [no] low-octets-offered-count [no] low-packets-offered-count [no] uncoloured-octets-offered-count [no] uncoloured-packets-offered-count ref-aa-specific-counter any no ref-aa-specific-counter ref-override-counter ref-override-counter-id ref-override-counter all no ref-override-counter e-counters [all] no e-counters [no] in-profile-octets-discarded-count [no] in-profile-packets-discarded-count [no] out-profile-octets-discarded-count [no] out-profile-packets-discarded-count Page 442 7950 XRS System Management Guide

Event and Accounting Logs i-counters [all] no i-counters [no] all-octets-offered-count [no] all-packets-offered-count [no] high-octets-discarded-count [no] high-octets-offered-count [no] high-packets-discarded-count [no] high-packets-offered-count [no] low-octets-discarded-count [no] low-packets-discarded-count [no] low-octets-offered-count [no] low-packets-offered-count [no] uncoloured-octets-offered-count [no] uncoloured-packets-offered-count ref-queue queue-id ref-queue all no ref-queue e-counters [all] no e-counters [no] in-profile-octets-discarded-count [no] in-profile-packets-discarded-count [no] out-profile-octets-discarded-count [no] out-profile-packets-discarded-count i-counters [all] no i-counters [no] all-octets-offered-count [no] all-packets-offered-count [no] high-octets-discarded-count [no] high-octets-offered-count [no] high-packets-discarded-count [no] high-packets-offered-count [no] low-octets-discarded-count [no] low-packets-discarded-count [no] low-octets-offered-count [no] low-packets-offered-count significant-change delta no significant-change 7950 XRS System Management Guide Page 443

Command Hierarchies File ID Commands [no] file-id log-file-id location cflash-id [backup-cflash-id] rollover minutes [retention hours] no rollover Event Filter Commands Refer to the 7x50 SR OS Services Guide for information about uring log filters in a VPRN service. [no] filter filter-id default-action {drop forward} no default-action [no] entry entry-id action {drop forward} no action [no] match application {eq neq} application-id no application message {eq neq} pattern pattern [regexp] no message number {eq neq lt lte gt gte} event-id no number router {eq neq} router-instance [regexp] no router severity {eq neq lt lte gt gte} severity-level no severity subject {eq neq} subject [regexp] no subject Page 444 7950 XRS System Management Guide

Event and Accounting Logs Event Handling System (EHS) Commands event-handling [no] handler event-handler-name action-list [no] entry entry-id min-delay <[1..604800]> no min-delay [no] script-policy script-policy-name [owner owner-name] no script-policy [no] shutdown Event Trigger Commands event-trigger [no] event application-id event-name-id [no] shutdown [no] trigger-entry entry-id event-handler event-handler-name [no] event-handler -filter filter-id [no] log-filter 7950 XRS System Management Guide Page 445

Command Hierarchies Log ID Commands Refer to the 7x50 SR OS Services Guide for information about uring logs in a VPRN service. [no] log-id log-id filter (log destination) filter-id no filter (log destination) from {[main] [security] [change] [debug-trace]} no from [no] shutdown time-format {local utc} to console to file log-file-id to memory [size] to session to snmp [size] to syslog syslog-id SNMP Trap Group Commands Refer to the 7x50 SR OS Services Guide for information about uring SNMP trap groups in a VPRN service. [no] snmp-trap-group log-id trap-target name [address ip-address] [port port] [snmpv1 snmpv2c snmpv3] notify-community communityname snmpv3securityname [security-level {noauth-no-privacy auth-no-privacy privacy}] [replay] no trap-target name Page 446 7950 XRS System Management Guide

Event and Accounting Logs Syslog Commands Refer to the 7x50 SR OS Services Guide for information about uring syslogs in a VPRN service. [no] syslog syslog-id address ip-address no address facility syslog-facility no facility level {emergency alert critical error warning notice info debug} no level -prefix log-prefix-string no log-prefix port port no port 7950 XRS System Management Guide Page 447

Command Hierarchies Show Commands Clear Command Refer to the 7x50 SR OS Services Guide for information about log show routines for VPRN services. show clear log-id accounting-policy [acct-policy-id] [access network] accounting-records applications event-control [application [event-name event-number]] event-handling handler [handler-name] handler detail file-id [log-file-id] filter-id [filter-id] -collector -id [log-id] [severity severity-level] [application application] [sequence from-seq [toseq]] [count count] [router router-instance [expression] [subject subject [regexp]] [ascending descending] [message format [msg-regexp]] snmp-trap-group [log-id] syslog [syslog-id] Page 448 7950 XRS System Management Guide