USER MANUAL 10R Spot\Beam Light Please Read Over This Manual Before Operating The Light Fixture
1 PRODUCT SPECIFICATIONS 1.1 PRODUCT SPECIFICATIONS The 10R Spot\Beam light is an improved version of Beam 280W. The upgraded software enables the faster and more quietly rotation. The smoother rotation can bring various awesome effects in a short time.voltage110w~240v/50-60hz Ballast:Electronic Ballast Lamp:OSRAM 10R(280W) Average Lifespan: 2200Hrs Power consumption: 500W Lens : high precision optical lens Color wheel: 13 dichroic filters + white Rotating Gobo Wheel, with 9 bidirectional and indexable gobos (outside diameter: 15,4 mm, image diameter: 13 mm) Static Gobo wheel with 14 fixed gobos, at variable rotation Prism 1: 8-facet circular prism rotating in both directions at different speeds Prism 2: 6-facet linear prism rotating in both directions at different speeds Zoom: parallel beam angel 2.5-20 change Wash effect : adjustable Wash effects angle Focus: linear adjustment Dimmer : 0-100% linear adjustment Strobe : Double lens strobe (0.5-9 times/ second) Pan/Tilt : X axis 540 Y axis 270 automatically accurate positioning Fixation option: Pan/Tilt-lock mechanism Control mode : Standard DMX512, Automatic and Master/ slave mode Channel : 16 CHs / 24 CHs Controller can open the lamp and reset, including delaying function Weight : 19kG Dimension: 380 (L) X 260 (W) X 610 (H) mm 495 610 260 380.1.
1.2 PRODUCT FEATURES Enter UP DOWN ESC 5 pindmx 3 pindmx SWITCH FUSE POWER IN DMX-input XLR mounting-sockets (rear view): XLR mounting-plugs (rear view): 1 - Shield 2 - Signal (-) 3 - Signal (+) 4 - Not connected 5 - Not connected 1 - Shield 2 - Signal (-) 3 - Signal (+) 4 - Not connected 5 - Not connected If you are using the standard DMX controllers, you can connect the DMX output of the controller directly with the DMX input of the first fixture in the DMX-chain. If you wish to connect DMX-controllers with other - XLR-out puts, you need to use adapter-cables..2.
2 INSTALLATION 2.1 MOUNTING The fixture can be mounted in any position. Always ensure that mounting surface can withstand 10 times the weight of the fixture. Always use a safety cable when mounting the fixture in any elevated position. CLAMP UPRIGHT HANGING IMPORTANT SAFETY NOTE!! Always use a safety cable when installing this unit!! Be sure that the safety cable is connected to a solid load-bearing structure..3.
2.2 FUSE REPLACEMENT Remove the safety cap by a screwdriver. Fetch the old fuse from safety cap. SAFTY CAP Install a new fuse. Install the safety cap. Fuse:6A,250V FUSE. 2.3 SAFETY WARNING IMPORTANT ALWAYS READ THE USER MANUAL BEFORE OPERATION. PLEASE CONFIRM THAT THE POWER SUPPLY STATED ON THE PRODUCT IS THE SAME AS THE MAINS POWER SUPPLY IN YOUR AREA. This product must be installed by a qualified professional. Always operate the equipment as described in the user manual. A minimum distance of 0.5m must be maintained between the equipment and combustible surface. The product must always be placed in a well ventilated area. Always make sure that the equipment is installed securely. DO NOT stand close to the equipment and stare directly into the LED light source. Always disconnect the power supply before attempting and maintenance. Always make sure that the supporting structure is solid and can support the combined weight of the products. The earth wire must always be connected to the ground. Do not touch the power cables if your hands are wet. ATTENTION This product left the place of manufacture in perfect condition. In order to maintain this condition and for safe operation, the user must always follow the instructions and safety warnings described in this user manual. Avoid shaking or strong impacts to any part of the equipment. Make sure that all parts of the equipment are kept clean and free of dust. Always make sure that the power connections are connected correct and secure. If there is any malfunction of the equipment, contact your us immediately. When transferring the product, it is advisable to use the original packaging in which the product left the factory. Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent that their effectiveness is impaired. The lamp (LED) shall be changed if it has become damaged or thermally deformed..4.
3 DISPLAY PANEL OPERATION 3.1 BASIC ENTER Enter the currently selected menu or confirm the current function value DOWN Scroll 'DOWN' through the menu list or decrease the value of the current function UP Scroll 'UP' through the menu list or increase the value of the Current function ESC Exit menu ENTER UP DOWN ESC ENTER UP DOWN ESC Icons used in the touch screen menu: - [DMX Address] 0~512 (menu). - Fixture Information. - Fixture setting. - [slider control] used to recall slider system for setting desired value. - Auto run mode. - [keyboard control] used to recall keyboard system for setting desired value. - [lamp menu] used to switch on/off the lamp and to set lamp functions. - [back arrow] used to move back to the previous screen (menu). - [up arrow] used to move up on the previous page. - [down arrow] used to move down on the next page. - [confirm] used to save adjusted values, to leave menu or to perform desired action. - [cancel] used to leave menu item without saving changes. - [display turn] used to turn the display by 180. - Language. The menu page displays icons for each function that you can perform from the touch screen. After switching the fixture on, the touch screen shows the screen with the ROBE logo:.5.
4 CHANNEL CHANNEL 16Channels 24Channels Value Function 1 1 0~255 Pan 0~540 * 2 0~255 Pan Fine 2 3 0~255 Tilt * 4 0~255 Tilt Fine 3 5 0~255 Pan/Tilt Speed Control 0~129 No Functions 130~139 Lamp On 140~149 Pan/Tilt Reset 150~159 Colour System Reset 160~169 Gobo Wheels Reset 4 6 Dimmer/Shutter 170~179 Reset 180~189 Zoom/Focus/Prism Reset 200~209 Total Reset 230~239 Lamp Off Color 0~129 13color+white 130~134 Deep Red 135~138 Deep Blue 139~143 Yellow 144~147 Green 148~152 Magenta 153~157 Azure 158~161 Red 5 7 162~166 Dark green 167~171 Amber 172~176 Blue 177~180 Orange 181~185 CTO 186~189 UV filter 190 220 221~224 225~255 Clockwise rotate from slow to fast Stop Anti-clockwise rotate from slow to fast * 8 0~255 Colour wheel fine 6 9 NC NC.6.
16Channels 24Channels Value Function Gobo 1 0~3 Open/hole 4~9 Gobo 1 10~15 Gobo 2 16~21 Gobo 3 22~27 Gobo 4 28~33 Gobo 5 34~39 Gobo 6 40~45 Gobo 7 46~51 Gobo 8 52~57 Gobo 9 58~63 Gobo 10 64~69 Beam reducer 1 70~75 Beam reducer 2 76~81 Beam reducer 3 82~87 Beam reducer 4 88~95 Gobo 1 Shaking 7 10 96~105 Gobo 2 Shaking 104~111 Gobo 3 Shaking 112~119 Gobo 4 Shaking 120~127 Gobo 5 Shaking 128~135 Gobo 6 Shaking 136~143 Gobo 7 Shaking 144~151 Gobo 8 Shaking 152~159 Gobo 9 Shaking 160~167 Gobo 10 Shaking 168~175 Beam 1 Shaking 176~183 Beam 2 Shaking 184~191 Beam 3 Shaking 192~199 Beam 4 Shaking 200~201 Open/hole 202~227 228~229 230~255 Clockwise rotate from slow to fast Stop Anti-clockwise rotate from slow to fast.7.
16Channels 24Channels Value Function Gobo 2 0 Open/Hole(default) 1~4 Hole(flat field) 5~7 Gobo 1 8~10 Gobo 2 11~13 Gobo 3 14~16 Gobo 4 17~19 Gobo 5 20~22 Gobo 6 23~25 Gobo 7 26~28 Gobo 8 29~31 Gobo 9 32~34 Gobo 1 35~37 Gobo 2 38~40 Gobo 3 41~43 Gobo 4 44~46 Gobo 5 47~49 Gobo 6 50~52 Gobo 7 53~55 Gobo 8 56~59 Gobo 9 60~67 Gobo 1 68~75 Gobo 2 8 11 76~83 Gobo 3 84~91 Gobo 4 92~99 Gobo 5 100~107 Gobo 6 108~115 Gobo 7 116~123 Gobo 8 124~129 Gobo 9 130~137 Gobo 1 138~145 Gobo 2 146~153 Gobo 3 154~161 Gobo 4 162~169 Gobo 5 170~177 Gobo 6 178~185 Gobo 7 186~193 Gobo 8 194~199 Gobo 9 200~201 Open/hole 202~227 Forwards gobo wheel rotation from fast to slow 228~229 No rotation 230~255 Backwards gobo wheeel rotation from slow to fast.8.
16Channels 24Channels Value Function Gobo Rotation 0 No rotation Forwards gobo 1~127 rotation from fast to 9 12 slow 128~129 No rotation Backwards gobo 130~255 rotation from slow to fast * 13 NC NC Prism 0~19 Open position(hole) 210~49 6-facet linear rotating prism-indexing 50~75 6-facet linear rotating prism-rotation 10 14 8-facet circular 76~105 roating prismlndexing 8-facet circular 106~127 rotating prismrotation Prism/gobo macros Prism rotation 0 No rotation Forwards prism 1~127 rotation from fast to 11 15 slow 128~129 No rotation Backwards prism 130~255 rotation from slow to fast Frost 12 16 0~127 Open 128~255 Frost 100% 13 17 0~255 Zoom * 18 0~255 Fine zooming 14 19 0~255 Focus * 20 0~255 Fine focusing * 21 NC NC.9.
16Channels 24Channels Value Function Shutter 0~31 Shutter closed 32~63 Shutter open,full lamp power 64~95 Strobe-effect from slow to fast 96~127 Shutter open Opening pulse in 128~143 sequences from slow 15 22 to fast Closing pulse in 144~159 sequences from fast to slow 160~191 Shutter open Random strobeeffect 192~223 from slow to fast 224~255 Shutter open,full lamp power 16 23 24 0~255 0~255 Dimmer Fine dimming.10.
5 CONTROLLER The fixture is equipped with both 3-pin and 5-pin XLR sockets for DMX input and output.the sockets are wired in parallel. Only use a shielded twisted-pair cable designed for RS-485 and 3-pin or 5-pin XLR-plugs and connectors in order to connect the controller with the fixture or one fixture with another. DMX - output XLR mounting-sockets (rear view): DMX-input XLR mounting-plugs (rear view): 1 - Shield 2 - Signal (-) 3 - Signal (+) 4 - Not connected 5 - Not connected 1 - Shield 2 - Signal (-) 3 - Signal (+) 4 - Not connected 5 - Not connected If you are using the standard DMX controllers, you can connect the DMX output of the controller directly with the DMX input of the first fixture in the DMX-chain. If you wish to connect DMX-controllers with other - XLR-out puts, you need to use adapter-cables. Building a serial DMX-chain: Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the next fixture. Always connect one output with the input of the next fixture until all fixtures are connected. Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120 Ω resistor between Signal ( ) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture..11