melite Patent pending Moving Pictial Scene Project Made in USA Repeats a 0 scene show in 0 minutes melite is an indo/outdo moving pictial scene project used f decating advertising. Currently available themes: New Year s Eve Valentine s Day St. Patrick s Day Easter Fourth of July Halloween Halloween Sty Thanksgiving Features: Christmas with Santa Nativity Christmas Sty Creatures of the Reef Birthday Spring Summer Fall Winter Projects 0 scenes that blend from one picture to another Projects bright, crisp col images Adjustable focus and image size Built-in, sealed, long life transfmer Quality lamp and dual lens Lamp life,000 hours Decative rock cover melite dimensions: (6 L)(6 W)( H) Image Film Disk (0. dia.) Disk Mot rev/0 min. Transfmer Housing Optional nd Sty Window Optional Alarm melite requires the the Dome to protect and cover it f outdo use. 0-0 foot throw (adjustable image size) (small rocks, wood chips, mulch) 6 Cd & Plug Ground Stake & Mounting Hardware 8-/8 x Stakes Protective cover Spanner Tamper-Resistant Nuts Pan Adjust Knob Dome Ground cover dimensions: 0 x0 x high Stake RAZTECH R Options Alarm Tamper resistant kit (stake/mounting hardware) nd sty window Mot speed options model
melite LED Instructions Warning: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. SEE SAFETY PAGE FOR DETAILS. Caution: Befe installation, check the ground f any electrical, gas, plumbing, phone line hazards. Disk Screw Film Lens assembly Retaining screw LED inside (0,000 hours lamp life) Focus Control Slide the lens assembly within the tube in out to focus. Guide Guide Screw Rotate Plug Lock Knob Ground Stake Rotate stem about light tube. Place stem in stand stake and tighten lock knob. Place film in guide slot and tighten with front screw. Insert plug into receptacle. Focus image by moving lens assembly in out in tube. Changing Image Size Lens Assembly # Lens # Lens Increase image size: move lens # closer to lens # Move lens # by loosening and moving lens assembly nuts.
melite melite with Instructions Model Patent Pending Image Film Disk Optional nd Sty Window Disk Mot rev/0min. Transfmer Housing Optional Alarm 0-0 foot throw (Adjustable image size) Cd and Plug Electrical Box Extension Cd Ground Cover: small rocks wood chips mulch Pan Adjust Knob Spanner Tamper-Resistant Nuts : 0 x0 x high Hizontal Strap Plastic vap barrier Line bottom of rock Stake and Mounting Hardware 8-/8 x Stakes Ground Stake Outer Stake Inner Stake 0vac Power Feed 6 7 Position melite at the projected target. Place a vap barrier on rock flo such as a plastic garbage bag. Cover melite with the. Check that light path is clear with. Connect hizontal straps to the. Drive all outer stakes into ground (if you have tamper kit). Remove and drive inner stakes into ground. Position over melite and lock into place with nuts.
Limited Warranty Tech Lighting takes pride in its products and believes they are manufactured to the highest possible standards. refe, Tech warrants its products against defects in materials wkmanship f a period of one () year from the date of the iginal purchase. This warranty is void in any of the following circumstances: (a) project has been misused, neglected, damaged abused. (b) project has been improperly installed, operated, repaired, maintained. (c) project has been modified. (d) project has been connected to other equipment with which it is not compatible. (e) project has been used sted in conditions outside its electrical environmental specifications. (f) project has been used f purposes other than f which it was designed. (g) project has been used outside its stated specifications and operating parameters. Crect installation of the project is the owner s responsibility. Under no circumstances will Tech Lighting be liable f direct, indirect, incidental, special consequential costs damages, including dismantling and re-installation costs, loss of operations profits. Tech Lighting accepts no liability f personal injury property damage resulting from failure to heed relevant operating and safety procedures specified by Tech imposed by law. Tech Lighting will, at its option, repair replace any of it s products covered by warranty without cost to the consumer f either parts lab provided the warranty card is sent back to Tech within days from the date of purchase, subject to a valid warranty claim. Light bulbs are excluded from this warranty. If warranty period has expired, other terms of the warranty are not met, a service charge will be made accding to the repairs needed, and the unit returned to you C.O.D. Tech Lighting disclaims any other express implied warranties, including warranties of merchantability fitness f purpose, to the maximum extent permitted by law. Tech Lighting has a policy of ongoing product improvement and specifications are subject to change without notice. WARRANTY CARD DETACH and MAIL WITHIN DAYS NAME OF PURCHASER ADDRESS CITY STATE ZIP PRODUCT NAME DATE PURCHASED STORE NAME COMMENTS ABOUT PRODUCT SERIAL NO.
READ ALL INSTRUCTIONS SAFETY SHEET WARNING: WHEN USING OUTDOOR PORTABLE LAMPS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY: USE ONLY A THREE-WIRE OUTDOOR EXTENSION CORD AND GROUNDED RECEPTACLE. USE A GROUND FAULT CIRCUIT INTERRUPTER (GFCI) PROTECTED CIRCUIT. DO NOT USE WITH THE EXTENSION CORD NEAR WATER OR WHERE WATER MAY ACCUMULATE. KEEP THE LIGHT AT LEAST 6 FEET FROM POOLS AND SPAS. KEEP THE PLUG AND RECEPTACLE DRY. Lighted Lamp Is Hot! Turn off/unplug and allow to cool befe replacing lamp. Lamp gets HOT quickly! Contact only switch/plug when turning on. Do not touch hot lamp, lens, guard, enclosure. Do not remain in light path if skin feels warm. Do not look directly at lighted lamp. Keep lamp away from materials that may burn. Use only with wattage of lamp marked on fixture. Do not touch the lamp bulb inner reflect at any time. Use a soft cloth, oil from skin may damage lamp. Do not operate the luminaries fitting with a missing damaged shield. Keep lens assembly out of sun path, damage of film may result. Always lock lens and lamp assembly with front and back retaining screws. Do not look into the sun lamp with lens lens assembly. SAVE THESE INSTRUCTIONS Safety Glasses Required Safety Glasses Required If yo u h av e a n y questions pl e ase c al l: