SYSTIMAX Structured Cabling Systems Family of Cords Quality Stranded and Solid Cords That Connect Data and Voice Circuits Lucent Technologies Family of Stranded Cords includes 110 patch, modular and adapter cords. The 110 Patch Cords, D8SA Modular Cords, and various Adapter Cords provide for the administration and interconnection of data and voice circuits. Designed for straightforward administration, these cords meet the increasing demand for reliability and the transmission performance requirements of evolving bandwidth hungry network applications. These cords are better 110 Patch Cords, D8SA Modular Cords, and Adapter Cords matched to the impedance of the 1061C+/ 2061B+/2061D+ cable, minimizing signal reflections, and creating more robust data transmission. Low Structural Return Loss of the cords improves cable balance which lowers the magnitude of signal reflections and contributes to better transmission. These cords are manufactured with Lucent Technologies data grade 1074 cordage. This cordage consists of 24 gauge, stranded copper conductors insulated with high density polyethylene.
The insulated conductors are tightly twisted into individual pairs and jacketed with flame retardant PVC. The 1074 cordage exceeds TIA/EIA 568A Category 5 requirements for cords used for patching and also in the work area and telecommunications closet as equipment cables. To take this one step further, the 1074 cordage exceeds Pair-to-Pair Near End Crosstalk (NEXT) to the extent that, even when using the more stringent Power Sum calculation method for backbone cable, the cordage still passes the NEXT requirements. The extra performance margin of these cords ensures that your network will be ready for today s applications and emerging technology such as 622 Mbps ATM using parallel transmission schemes. 110 Patch Cord 110 Patch Cords The Category 5 110 Patch Cords, available in 1-, 2-, 3- and 4-pair sizes, mate with the front of the 110 Connecting Block and feature a built-in exclusion to prevent accidental polarity reversals and split pairs. Each plug includes an international symbol marking 1 to indicate the side of the plug that faces up. The 110 Patch Cord plugs incorporate Lucent Technologies 110P8CAT5 Patch Cord on 110 Patch Panel Terminal Block patented cross-over concept which employs crosstalk cancellation techniques within the plug body to provide superior NEXT performance. The 110 Patch Cords are ideal for high activity patching environments. Modular Cords The D8SA Modular Cords utilize 1074 cordage and are factory connectorized with 8-pin modular plugs. These modular cords can be used for 8-position modular patching applications to interconnect various data terminal devices and to connect high-speed data terminal devices to information outlets. Adapter Cords Adapter Cords are factory connectorized with your choice of an 8-pin modular plug, an MIC connector, and/or a 110 patch cord plug. These cords also feature 1074 cordage and can be used to interconnect various electronic devices and connect consolidation point to information outlets. The number of conductors and the length of cordage, including an unterminated option, is based on the anticipated use of the cord. The wiring assignment for the modular plug (T568B) is: light blue on pin 5 blue on pin 4 white on pin 1 orange on pin 2 light green on pin 3 green on pin 6 light brown on pin 7 brown on pin 8 The wiring assignment for the 120 adapter cord from the 110 patch plug to the modular plug is pin 1 to pin 1, pin 2 to pin 2, pin 3 to pin 3 and pin 4 to pin 6. The wiring assignment for the MIC connector is light blue on the green pin, blue on the red pin, light green on the black pin, green on the orange pin. The 110 patch plug is wired with the straight color code. Adapter Cords Cord Number Connection 114 MIC to MIC 115 MIC to unterminated end 117 8 pin modular plug to unterminated end 118 MIC to 8 pin modular plug 119 4 pair 110 patch plug to 8 pin modular plug 120 2 pair 110 patch plug to 8 pin modular plug
Stranded Cord Features 110 cords, D8SA, and Adapter cords comply with the Category 5 requirements specified in TIA/EIA 568A Performance comparable with 1061/2061 due to improved transmission characteristics 110 cord has gas-tight connections Flexible 24 gauge stranded wire conductors Physical Characteristics 110 Patch Cords and D8SA Modular Cords D8SA 110 Patch Plug Operating 40 F ( 40 C) to 14 F ( 10 C) to Temperature Range 140 F (60 C) 140 F (60 C) Contact Plating 50 microinches gold 50 microinches gold over 100 microinches over 75 microinches nickel nickel Contact Stability 20 milliohms 5 milliohms maximum change maximum change Plug Retention Force 25 pounds minimum 6 pounds minimum* 25 pounds maximum* Insertion Life 750 insertions >200 insertions * Depending on pair size High termination density Administration requires no special tools or customer training Built-in exclusion feature (for 110 patch cords) prevents accidental polarity reversals and split pairs Certified SYSTIMAX Structured Cabling Systems (SCS) Components UL listed, CSA and Austel approved All cords meet SYSTIMAX SCS Power Sum specifications Stranded Cord Advantages Fully supports data rates @ 100 meters over UTP for applications with data rates up to 155 Mbps Maintains Performance over longer distances than standard cord lengths Reliable connection for high data rate transmission and high-activity environments Line moves and circuit rearrangements are quick and simple Flexibility to select the number of pairs (1-, 2-, 3-, or 4-pair) needed for specific circuits (110 Cords) Transmission Characteristics 1074 Cordage Pair to Pair Power Sum Structural Maximum Near End Near End Return Attenuation Crosstalk Loss Crosstalk Loss Loss (SRL) Frequency db/100 meters db/100 meters db/100 meters db 1.0 MHz 1.9 76 73 36 4.0 MHz 3.9 64 61 36 8.0 MHz 5.5 60 57 30 10.0 MHz 6.3 59 56 30 16.0 MHz 8.0 56 53 31 20.0 MHz 8.9 55 52 29 25.0 MHz 10.0 54 51 30 31.25 MHz 11.2 52 49 31 62.5 MHz 16.1 48 45 27 100.0 MHz 20.7 45 42 25
1074 Cordage Electrical and Transmission Characteristics DC Resistance per lead: 9.38 ohms/100 meters maximum DC Resistance Unbalance: 5% maximum Mutual Capacitance: 17 pf/foot Characteristic Impedance: 100 ohms ± 15% from 1 100 MHz Dielectric Breakdown Voltage: 1000V AC lead to lead minimum Maximum Capacitance Unbalance (pair to ground): 330 pf/100 meters Ordering Information 110 Patch Cord with 110 Patch Cord Plugs Product Code Comcode Product Code Comcode 110P2CAT5F-2B 107 733 206 110P6CAT5F-2B 107 733 420 110P2CAT5F-3B 107 733 214 110P6CAT5F-3B 107 733 438 110P2CAT5F-4B 107 733 222 110P6CAT5F-4B 107 733 446 110P2CAT5F-5B 107 733 230 110P6CAT5F-5B 107 733 453 110P2CAT5F-6B 107 733 248 110P6CAT5F-6B 107 733 461 110P2CAT5F-7B 107 733 255 110P6CAT5F-7B 107 733 479 110P2CAT5F-8B 107 733 263 110P6CAT5F-8B 107 733 487 110P2CAT5F-9B 107 733 271 110P6CAT5F-9B 107 733 495 110P2CAT5F-12B 107 733 289 110P6CAT5F-12B 107 733 503 110P2CAT5F-15B 107 733 297 110P6CAT5F-15B 107 733 511 110P2CAT5F-18B 107 733 305 110P6CAT5F-18B 107 733 529 110P4CAT5F-2B 107 733 313 110P8CAT5F-2B 107 733 537 110P4CAT5F-3B 107 733 321 110P8CAT5F-3B 107 733 545 110P4CAT5F-4B 107 733 339 110P8CAT5F-4B 107 733 552 110P4CAT5F-5B 107 733 347 110P8CAT5F-5B 107 733 560 110P4CAT5F-6B 107 733 354 110P8CAT5F-6B 107 733 578 110P4CAT5F-7B 107 733 362 110P8CAT5F-7B 107 733 586 110P4CAT5F-8B 107 733 370 110P8CAT5F-8B 107 733 594 110P4CAT5F-9B 107 733 388 110P8CAT5F-9B 107 733 602 110P4CAT5F-12B 107 733 396 110P8CAT5F-12B 107 733 610 110P4CAT5F-15B 107 733 404 110P8CAT5F-15B 107 733 628 110P4CAT5F-18B 107 733 412 110P8CAT5F-18B 107 733 636 (Colors) 110P8CAT5FBL-3B 107 784 399 110P8CAT5FLL-3B 107 784 720 110P8CAT5FBL-5B 107 784 415 110P8CAT5FLL-5B 107 784 746 110P8CAT5FBL-7B 107 784 431 110P8CAT5FLL-7B 107 784 761 110P8CAT5FBL-9B 107 784 456 110P8CAT5FLL-9B 107 784 787 110P8CAT5FBL-12B 107 784 357 110P8CAT5FLL-12B 107 784 688 110P8CAT5FOR-3B 107 784 837 110P8CAT5FRD-3B 107 784 944 110P8CAT5FOR-5B 107 784 852 110P8CAT5FRD-5B 107 784 969 110P8CAT5FOR-7B 107 784 878 110P8CAT5FRD-7B 107 784 985 110P8CAT5FOR-9B 107 784 894 110P8CAT5FRD-9B 107 785 008 110P8CAT5FOR-12B 107 784 795 110P8CAT5FRD-12B 107 784 902 110P8CAT5FGN-3B 107 784 506 110P8CAT5FSA-3B 107 785 057 110P8CAT5FGN-5B 107 784 522 110P8CAT5FSA-5B 107 785 073 110P8CAT5FGN-7B 107 784 548 110P8CAT5FSA-7B 107 785 099 110P8CAT5FGN-9B 107 784 563 110P8CAT5FSA-9B 107 785 115 110P8CAT5FGN-12B 107 784 464 110P8CAT5FSA-12B 107 785 016 110P8CAT5FIV-3B 107 784 613 110P8CAT5FYL-3B 107 785 164 110P8CAT5FIV-5B 107 784 639 110P8CAT5FYL-5B 107 785 180 110P8CAT5FIV-7B 107 784 654 110P8CAT5FYL-7B 107 785 206 110P8CAT5FIV-9B 107 784 670 110P8CAT5FYL-9B 107 785 222 110P8CAT5FIV-12B 107 784 571 110P8CAT5FYL-12B 107 785 123
Ordering Information D8SA Modular Cord with 8-pin Modular Plugs Product Code Comcode Product Code Comcode D8SA-2B 107 742 348 D8SA-8B 107 742 397 D8SA-3B 107 742 355 D8SA-9B 107 742 405 D8SA-4B 107 742 363 D8SA-10B 107 742 413 D8SA-5B 107 742 371 D8SA-14B 107 748 287 D8SA-6B 107 742 389 D8SA-25B 107 748 295 D8SA-7B 107 431 106 D8SA-50B 107 748 303 (Colors) D8SA-BL4 107 771 107 D8SA-LL4 107 771 297 D8SA-BL7 107 771 115 D8SA-LL7 107 771 305 D8SA-BL10 107 771 123 D8SA-LL10 107 771 313 D8SA-OR4 107 771 164 D8SA-RD4 107 771 198 D8SA-OR7 107 771 172 D8SA-RD7 107 771 206 D8SA-OR10 107 771 180 D8SA-RD10 107 771 214 D8SA-GN4 107 771 222 D8SA-SA4 107 771 255 D8SA-GN7 107 771 230 D8SA-SA7 107 771 271 D8SA-GN10 107 771 248 D8SA-SA10 107 771 289 D8SA-IV4 107 771 131 D8SA-YW4 107 771 321 D8SA-IV7 107 771 149 D8SA-YW7 107 771 339 D8SA-IV10 107 771 156 D8SA-YW10 107 771 347 Adapter Cords One per pack MIC to MIC Comcode 114P8CAT5F2A 107 836 678 114P8CAT5F5A 107 836 686 MIC to Unterminated Cords Comcode 115P4CAT5F15A 107 836 694 115P4CAT5F30A 107 836 702 Modular to Unterminated Cords Comcode 117P8CAT5F15B* 107 836 710 117P8CAT5F30B 107 836 728 MIC to MOD Comcode 118P4CAT5F2B 107 833 634 118P4CAT5F3B 107 833 642 118P4CAT5F5B 107 833 659 118P4CAT5F15B 107 833 667 118P8CAT5F2B 107 833 683 118P8CAT5F3B 107 833 691 118P8CAT5F5B 107 833 709 118P8CAT5F15B 107 833 717 118P8CAT5F30B 107 833 725 * Ten pack
Ordering Information 119 Patch Cord with 8-Pin Modular Plug & 4 Pair 110 Patch Plug 119 with T568A Wiring Product Code Comcode Product Code Comcode 119P8CAT5F-2C 107 796 765 119P8CAT5F-7C 107 796 815 119P8CAT5F-3C 107 796 773 119P8CAT5F-8C 107 796 823 119P8CAT5F-4C 107 796 781 119P8CAT5F-9C 107 796 831 119P8CAT5F-5C 107 796 769 119P8CAT5F-12C 107 796 740 119P8CAT5F-6C 107 796 807 119P8CAT5F-15C 107 796 757 119 with T568B Wiring 119P8CAT5F-2BT 107 774 457 119P8CAT5F-7BT 107 774 507 119P8CAT5F-3BT 107 774 465 119P8CAT5F-8BT 107 774 515 119P8CAT5F-4BT 107 774 473 119P8CAT5F-9BT 107 774 523 119P8CAT5F-5BT 107 774 481 119P8CAT5F-12BT 107 774 432 119P8CAT5F-6BT 107 774 499 119P8CAT5F-15BT 107 774 440 (Colors) 119P8CAT5FBL-3B 107 774 572 119P8CAT5FLL-3B 107 774 721 119P8CAT5FBL-5B 107 774 580 119P8CAT5FLL-5B 107 774 739 119P8CAT5FBL-7B 107 774 598 119P8CAT5FLL-7B 107 774 747 119P8CAT5FBL-9B 107 774 606 119P8CAT5FLL-9B 107 774 754 119P8CAT5FBL-12B 107 774 564 119P8CAT5FLL-12B 107 774 713 119P8CAT5FOR-3B 107 774 770 119P8CAT5FRD-3B 107 774 820 119P8CAT5FOR-5B 107 774 788 119P8CAT5FRD-5B 107 774 838 119P8CAT5FOR-7B 107 774 796 119P8CAT5FRD-7B 107 774 846 119P8CAT5FOR-9B 107 774 804 119P8CAT5FRD-9B 107 774 853 119P8CAT5FOR-12B 107 774 762 119P8CAT5FRD-12B 107 774 812 119P8CAT5FGN-3B 107 774 622 119P8CAT5FSA-3B 107 774 879 119P8CAT5FGN-5B 107 774 630 119P8CAT5FSA-5B 107 774 887 119P8CAT5FGN-7B 107 774 648 119P8CAT5FSA-7B 107 774 895 119P8CAT5FGN-9B 107 774 655 119P8CAT5FSA-9B 107 774 903 119P8CAT5FGN-12B 107 774 614 119P8CAT5FSA-12B 107 774 861 119P8CAT5FIV-3B 107 774 671 119P8CAT5FYL-3B 107 774 929 119P8CAT5FIV-5B 107 774 689 119P8CAT5FYL-5B 107 774 937 119P8CAT5FIV-7B 107 774 697 119P8CAT5FYL-7B 107 774 945 119P8CAT5FIV-9B 107 774 705 119P8CAT5FYL-9B 107 774 952 119P8CAT5FIV-12B 107 774 663 119P8CAT5FYL-12B 107 774 911 Ordering Information 120 Patch Cord with 8 Pin Modular Plug & 2 Pair 110 Patch Plug Product Code Comcode Product Code Comcode 120P4CAT5F-07B 107 774 531 120P4CAT5F-20B 107 774 556 120P4CAT5F-12B 107 774 549 1061 and 2061 Electrical and Transmission Characteristics EIA/TIA Category 5 DC Resistance Max 28.6 Ohms/100ft (9.4 Ohms) Mutual Capacitance Nom: 14pF/FT nominal and 46pF/FT maximum Characteristics impedance 1 100 MHZ (100[+15]) Color Key BL = blue OR = orange GN = green IV = ivory LL = lilac RD = red SA = sable YL = yellow
Open Office Architecture Modular Cords Modular Cords That Support Distribution Hardware and Information Outlets D8NA nonplenum and D8PA plenum cords are solid conductor connectorized cords designed for use in open office cabling applications as are the stranded D8SA and 117 cords. These Category 5 cords are designed to support both the distribution hardware and information outlets required in an open office environment. The information outlets are connected to consolidation point distribution hardware allowing for 25 pair cable to be extended from the telecommunication closet to the consolidation point distribution hardware. D8NA Patch Cord The individual four pair cords extend to the work station from the consolidation point hardware. The D8PA modular plug is clear light blue in color and has D8PA molded into the plug along with Lucent Technologies. The D8NA modular plug is clear in color and has D8NA molded into the plug along with Lucent Technologies. Solid Cord Features Complies with the Category 5 requirements specified in TIA/EIA 568A Certified SYSTIMAX Structured Cabling Systems (SCS) Components UL listed, CSA and Austel approved Meets SYSTIMAX SCS Power Sum specifications D8PA Patch Cord Solid Cord Advantages Fully supports data rates @ 100 meters over UTP for applications with data rates up to 155 Mbps Reliable connection for high data rate transmission and high-activity environments Line moves and circuit rearrangements are quick and simple
Transmission Rates D8NA and D8PA Cords 10 Mb/s fully supports StarLan 10 and Ethernet system 16 Mb/s fully supports Token Ring applications 100 Mb/s fully supports Ethernet 155 Mb/s fully supports ATM Transmission Characteristics D8NA and D8PA Cords Max. Pair/Pair Atten. Next SRL Frequency db/kft (avg) PowerSum (avg) ACR 1.0 MHz 1.9 75 72 45 73 4.0 MHz 3.8 66 63 40 62 8.0 MHz 5.4 61 59 38 55 10.0 MHz 6.1 60 58 36 54 16.0 MHz 7.7 59 55 36 51 20.0 MHz 8.7 57 54 36 48 25.0 MHz 9.8 55 52 36 45 31.25 MHz 11.0 54 51 35 43 62.5 MHz 15.0 49 46 32 33 100.0 MHz 20.4 47 43 29 26 Ordering Information D8NA and D8PA Cords * Product Code Comcode Length Color D8PA SE 1 WH33 107 487 571 33 White D8PA SEWH25 107 487 589 25 White D8PA SEWH66 107 487 597 66 White D8PA SEWH100 107 487 605 100 White D8PA DE 2 WH10 107 487 530 10 White D8PA DEWH20 107 487 548 20 White D8PA DEWH45 107 487 555 45 White D8PA DEWH75 107 487 563 75 White D8NA SESL18 107 597 684 18 Slate D8NA SESL33 107 597 692 33 Slate D8NA SESL65 107 597 700 65 Slate D8NA SESL100 107 597 718 100 Slate D8NA DESL15 107 551 707 15 Slate D8NA DESL25 107 551 715 25 Slate D8NA DESL50 107 551 723 50 Slate D8NA DESL75 107 551 731 75 Slate * All cords will be individually packaged 1 SE indicates single-ended 2 DE indicates double-ended Physical Characteristics D8NA and D8PA Cords Gauge: 24 AWG, Solid copper conductors Pair Size: 4 Lengths: D8NA: Single-Ended 15ft (4.57 m), 25ft (7.62 m), 50ft (15.2 m), 75ft (22.9 m) Double Ended 18ft (5.49 m), 33ft (10.1 m), 65ft (19.8 m), 100ft (30.5 m) D8PA: Single Ended 25ft (7.62 m), 33ft (10.1 m), 66ft (20.2 m), 100ft (30.5 m) Double Ended 10ft (3.05 m), 20ft (6.10 m), 45ft (13.72), 75ft (22.9 m) Plug retention force: 6 pounds min. 25 pounds max. Insertion life: 750 insertions SYSTIMAX SCS Certified Product For more information about this and other Lucent Technologies products and services, please contact your Lucent Technologies Sales Representative or call 1-800-344-0223, ext.6053. Outside the U.S. call 602-233-5895 Visit our Web site at http://www.lucent.com/systimax SYSTIMAX is a registered trademark of Lucent Technologies. 1 International Symbol Marking UL is a registered trademark of Underwriters Laboratories This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to Lucent Technologies products and services. Copyright 1996 Lucent Technologies All Rights Reserved Printed in USA Lucent Technologies Marketing Communications 4337FS Issue 7 ND 12/96