20V CORDLESS LED LAMP MODEL NO: CFL20Li PART NO: 6487035 OPERATION & MAINTENANCE INSTRUCTIONS LS0113
INTRODUCTION Thank you for purchasing this CLARKE 20V Cordless LED Lamp. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. SPECIFICATIONS Voltage Battery Type (Sold Separately) 20 VDC Li-Ion Output Duration Half Power 9 hours Full Power 6 hours Weight (without battery pack) Dimensions (without battery pack) (L x W x H) 0.27 kg 225 x 82 x 93 mm 2
SAFETY PRECAUTIONS WARNING: READ ALL INSTRUCTIONS. FAILURE TO FOLLOW ALL INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE AND/ OR SERIOUS INJURY. THE TERM POWER TOOL IN ALL WARNINGS LISTED BELOW REFERS TO YOUR 20V CORDLESS LED LAMP. WARNING: DO NOT STARE DIRECTLY INTO THE CORDLESS LED LAMP. WARNING: DO NOT POINT THE CORDLESS LED LAMP INTO OTHER PEOPLES EYES BATTERY TOOL USE AND CARE a. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. b. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. c. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. d. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. SERVICE a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 3
SAFETY RULES FOR WORKLIGHTS WARNING: FIRE HAZARD. DO NOT OPERATE CORDLESS LED LAMP NEAR FLAMMABLE LIQUIDS OR IN GASEOUS OR EXPLOSIVE ATMOSPHERES. INTERNAL SPARKS MAY IGNITE FUMES CAUSING PERSONAL INJURY. Do not expose Cordless LED Lamp to wet or damp areas. Do not expose Cordless LED Lamp to rain or snow. Do not wash Cordless LED Lamp with water or allow water to get inside. Do not submerge Cordless LED Lamp in water at any time. Do not operate without lens cover assembly attached. ENVIRONMENTAL PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. SAFETY SYMBOLS Weee Symbol CE Mark Read instruction manual before use 4
FITTING THE BATTERY PACK (NOT SUPPLIED) This lamp requires a Clarke 20V Lithium-ion battery pack (6487040) and 1 Hour Charger (6487050) to operate. Both are available separately from your local Clarke dealer. TO FIT THE BATTERY 1. Slide the battery pack onto the base of the lamp. TO REMOVE THE BATTERY 1. Press and hold the release buttons on the side of the battery pack. 2. Slide the battery pack away from the base of the handle. OPERATING THE LAMP 1. Press the on/off button to switch the lamp on at half power. 2. Press the on/off button again to select full power. 3. Press the on/off button a third time to switch the lamp off. CHANGE THE ANGLE OF THE LAMP 1. The lamp head can be rotated into the desired position by twisting. NOTE: Stop twisting when you encounter resistance, do not force the lamp head. 5
DECLARATION OF CONFORMITY 6
CLARKE ZX-R RANGE The Clarke ZX-R 20V cordless power tools are designed as a high power and quality solution for the tradesman that requires a number of different tool types. Hammer Drill. CDD20Li 6487010 Jig Saw CJS20Li 6487025 Circular Saw CCS20Li 6487015 Multifunction Tool. CMFT20Li 6487030 Led Lamp CFL20Li 6487035 Reciprocating Saw CRS20Li 6487020 Impact Driver CID20Li 6487000 20V Battery Model BL1500Li Part Number 6487050 Also Available 20V Battery Charger Part Number 6487050 7