Level 2 Designing and creating multimedia presentations (7266/ )

Similar documents
Level 3 ICT systems and network management ( )

Level 3 Install, configure and integrate networked hardware and software ( )

Level 3 Web fundamentals ( )

Level 2 Select and use IT 2 ( )

Level 3 Designing and creating advanced websites ( )

Level 1 Dismantle, assemble, install and maintain a desktop computing system (7266/7267/ )

Level 2 Install and configure ICT equipment and operating systems ( )

Level 2 Creating an event driven computer program using Java ( )

Level 2 Install, configure and test ICT networks (7266/ / )

Level 1 Multimedia Software (MM )

Level 2 Creating a procedural program using COBOL ( )

Level 3 Website software ( )

Level 2 Install and Configure Equipment and Operating Systems ( )

Level 1 Dismantle, assemble, install and maintain a desktop computing system (7266/7267/ )

Level 2 Create software components using Java (7266/ )

Level 3 Develop software using Java (7266/ )

Level 2 Security for IT Users ( )

Level 2 Creating an event driven computer program using Java ( )

Level 2 Networking Principles ( )

Level 3 Creating an object oriented computer program using Java ( / )

Level 2 Networking Principles ( )

Level 2 Designing and creating multi-page websites (7266/ )

Level 3 Network management and security ( )

Level 3 Software design fundamentals ( / )

Level 3 Network management and security ( )

Level 2 Security for IT users (ITS ) ITQ (QCF) Assignment guide for Candidates Assignment A. March 2010 Version 1.

Level 1 Creating simple web pages (7266/ )

Level 2 Networking, telephony and VoIP for the digital home technology integrator ( )

Level 2 FS IT user fundamentals (IUFFS )

Level 1Using mobile IT devices (UMD )

Level 2 Website software (WS )

Level 3 Design and maintain ICT networks software components ( )

Level 3 Multimedia software (MM )

January 2010 Version 9.0

Level 3 Develop software using Visual Basic.NET (7266/ )

Level 3 Voice and data communications ( )

Level 3 Implementing an ICT systems security policy ( / )

Level 1 Desktop publishing software (DTP )

Level 1 Design software (DIS )

Level 2 Set up an IT system (SIS )

Level 3 Develop software using C# (7266/ )

Level 2 Audio/video installation for the digital home technology integrator ( )

Level 1 Design software (DIS )

Level 1 Working with desktop publishing applications (7266/ )

Level 2 Install, configure and test ICT networks ( )

Level 3 Install, configure and integrate networked hardware and software ( )

Level 3 Creating an event driven computer program using Visual Basic.NET ( / )

Level 2 Digital Home Technology Integrator ( )

Level 1 IT user fundamentals (IUF:FS )

Level 1 IT user fundamentals (IUF:FS )

Level 1 Using the Internet for finding and sending information (7266/ )

Level 3 Multimedia Software (MM )

Level 3 Desktop publishing software (DTP )

Level 2 Control and security systems for the digital home technology integrator ( )

Level 2 IT software fundamentals (ISF:FS )

Level 3 Creating an event driven computer program using Visual Basic ( / )

Level 3 Principles of ICT Systems and Data Security ( / )

Level 3 Design software ( )

Level 1 Producing simple databases (7266/ )

Level 3 Install, configure and upgrade ICT software ( / )

Level 1 Using the Internet for finding and sending information (7266/ )

Level 3 Word processing software ( )

Level 1 Internet Safety for IT Users ( )

Level 2 Create software components using Visual Basic.NET ( )

Level 3 Design Software ( )

Level 2 Designing and creating databases (7266/ )

Level 3 Voice and data communications ( )

Level 2 Creating an event driven computer program using Visual Basic.NET ( )

Level 2 Creating an event driven computer program using VisualBasic.Net ( )

Level 2 Designing and creating documents using desktop publishing software (7266/ ) e-quals Assignment guide for Candidates Assignment C

Level 3 Using the Internet (INT )

Level 1 Creating presentations using word processing, spreadsheet and presentation software (7266/ )

Level 2 Combining word processing, spreadsheet and database applications to present information (7266/ )

Level 3 Design and maintain ICT network software components ( )

Level 3 Word processing software (WP )

Level 1 Producing simple word processed documents (7266/ )

Level 2 Data management software (DMS )

Level 2 Creating an event driven computer program using Visual Basic ( )

Level 1 Internet Safety for IT Users ( )

Systems and Principles Unit Syllabus

Level 1 Creating simple presentations (7266/ )

Level 3 Using collaborative technologies (UCT )

Level 2 Creating an event driven computer program using C# ( )

Level 3 Integrating applications to create advanced presentations (7266/ )

Level 3 Database software ( )

Level 2 Desktop publishing software (DTP )

Level 2 Create Software Components Using C# (7266/ )

Level 2 Creating an event driven computer program using C# ( )

Level 3 Using (EML )

Level 3 Data management software (DMS )

Level 3 Database Software ( )

Level 2 Using word processing software to adapt and merge documents (7266/ )

Level 2 Using word processing software to adapt and merge documents (7266/ )

Level 3 Designing and creating relational databases (7266/ ) e-quals

e-quals Unit Syllabus

Level 2 Designing and creating databases (7266/ )

e-quals Unit Syllabus

Systems and Principles Unit Syllabus

Start IT (itq) Database software ( )

Level 3 Software design fundamentals ( / )

Transcription:

Level 2 Designing and creating multimedia presentations (7266/7267-030) e-quals Assignment guide for Candidates Assignment A www.cityandguilds.com/e-quals07 August 2008 Version 2.0

About City & Guilds City & Guilds is the UK s leading provider of vocational qualifications, offering over 500 awards across a wide range of industries, and progressing from entry level to the highest levels of professional achievement. With over 8500 centres in 100 countries, City & Guilds is recognised by employers worldwide for providing qualifications that offer proof of the skills they need to get the job done. City & Guilds Group The City & Guilds Group includes City & Guilds, ILM (the Institute of Leadership & Management) which provides management qualifications, learning materials and membership services, NPTC which offers land-based qualifications and membership services, and HAB (the Hospitality Awarding Body). City & Guilds also manages the Engineering Council Examinations on behalf of the Engineering Council. Equal opportunities City & Guilds fully supports the principle of equal opportunities and we are committed to satisfying this principle in all our activities and published material. A copy of our equal opportunities policy statement is available on the City & Guilds website. Copyright The content of this document is, unless otherwise indicated, The City and Guilds of London Institute 2008 and may not be copied, reproduced or distributed without prior written consent. However, approved City & Guilds centres and learners studying for City & Guilds qualifications may photocopy this document free of charge and/or include a locked PDF version of it on centre intranets on the following conditions: centre staff may copy the material only for the purpose of teaching learners working towards a City & Guilds qualification, or for internal administration purposes learners may copy the material only for their own use when working towards a City & Guilds qualification The Standard Copying Conditions on the City & Guilds website also apply. Please note: National Occupational Standards are not The City and Guilds of London Institute. Please check the conditions upon which they may be copied with the relevant Sector Skills Council. Publications City & Guilds publications are available on the City & Guilds website or from our Publications Sales department at the address below or by telephoning +44 (0)20 7294 2850 or faxing +44 (0)20 7294 3387. Every effort has been made to ensure that the information contained in this publication is true and correct at the time of going to press. However, City & Guilds products and services are subject to continuous development and improvement and the right is reserved to change products and services from time to time. City & Guilds cannot accept liability for loss or damage arising from the use of information in this publication. City & Guilds 1 Giltspur Street London EC1A 9DD T +44 (0)20 7294 2800 F +44 (0)20 7294 2400 www.cityandguilds.com learnersupport@cityandguilds.com

Contents Unit 030 Designing and creating multimedia presentations Level 2 Assignment A Introduction Information for Candidates 2 Candidate instructions 3 Level 2 Assignment A V2.0 Designing and creating multimedia presentations (7266/7267-030) 1

Level 2 Designing and creating multimedia presentations (7266/7267-030) Assignment A Introduction Information for Candidates About this document This assignment comprises all of the assessment for Level 2 Designing and creating multimedia presentations (7266/7267-030). Health and safety You are asked to consider the importance of safe working practices at all times. You are responsible for maintaining the safety of others as well as your own. Anyone behaving in an unsafe fashion will be stopped and a suitable warning given. You will not be allowed to continue with an assignment if you compromise any of the Health and Safety requirements. This may seem rather strict but, apart from the potentially unpleasant consequences, you must acquire the habits required for the workplace. Time allowance The recommended time allowance for this assignment is 2 hours. 2 Level 2 Assignment A V2.0 Designing and creating multimedia presentations (7266/7267-030)

Level 2 Designing and creating multimedia presentations (7266/7267-030) Candidate instructions Time allowance: 2 hours Assignment set up: This assignment is made up of three tasks Scenario You have been asked to design an appropriate multimedia presentation advertising a local pop group who want to promote themselves on a social networking site, it is also their intention that this could be published on their own web site or circulated to local supporters via an e-mail. Information may be gathered from a variety of sources including video recordings, Internet web sites, magazine/newspaper, interviews etc. Task A - Design a Multimedia presentation You are asked to: identify your target audience, explain the purpose of the presentation and identify constraints; storyboard the presentation - maximum 10 screens (see example blank storyboard template); create a style sheet for the various elements used within the presentation; specify suitable hardware and software to enable the creation of the presentation; create a letter or e-mail requesting permission to use various resources to comply with Copyright law. The storyboards can be either hand sketched or produced electronically, and annotated by hand or electronically showing any amendments that may occur. The hardware and software specifications, and the letter or e-mail should be prepared using word processing software and a suitable e-mail application. Task B - Gather resources You should prepare sound and video files in advance. Using the software resources provided, prepare the following for inclusion in a multimedia presentation: suitable text an animation sequence of at least 6 frames; suitable images suitable video file suitable sound files, music and speech. Task C - Create a multimedia presentation Using the multimedia authoring software and resources, create a multimedia presentation in accordance with the storyboards, structure diagram and style sheet. Read all of the instructions carefully and complete the tasks in the order given. Level 2 Assignment A V2.0 Designing and creating multimedia presentations (7266/7267-030) 1

Task A - Design a Multimedia presentation 1 Produce a draft Terms of Reference including the following (you may choose to use the blank sample attached Appendix A). As a minimum include in your terms of reference: Your target audience The purpose of the project Any resources that you require Constraints of production Hardware requirements Software requirements This can be either on paper or electronic form. 2 Create storyboards (you may choose to use the blank sample attached Appendix B) for each screen that you intend to use. On each screen include the location and a brief description of at least the following: The purpose of each screen The area of screen that will include text The area of the screen that will use images and a description of the image Any navigation information, how features will be navigated to eg: (a) destinations/url s (b) Alt tag details or similar Detail two sound files, name them and where they will be used Detail how both are to be activated/played Specify the Video file, name it and where it will be used Detail how the video file is to be activated/played Specify background colours or background images that you intend to use Specify where animated features are to be used Detail how the animations are to activated/played. 3 Create a style sheet giving at least the following information: Specify Font type, style, size and colours to be used Specify alignment of paragraphs and line spacing Specify background colours for text boxes/buttons and any effects that may be used (raised, sunken etc). 4 Create a structure diagram indicating the navigation of the pages and how any links will work. 5 Create a draft letter/e-mail that could be used to request permission to use images etc taking into account copyright issues. Continued over 2 Level 2 Assignment A V2.0 Designing and creating multimedia presentations (7266/7267-030)

Task B - Gather resources 1 Create a folder in your work area called Multimedia. Create a text file that will be used as part of your multimedia presentation, proof read this and correct any spelling mistakes. Save this in your Multimedia folder. 2 In your folder Multimedia folder create a subfolder called Images. Select a number of suitable images that you have located and store them in your Images subfolder. Resize all images so that they are suitable for inclusion in your Multimedia presentation. Save these files in a suitable format for web/e-mail use in your Images folder. 3 In your Multimedia folder create a subfolder called Sound. Create/obtain two suitable sound files, one Speech and one Music. Save these files in a suitable format for web/e-mail use in your Sound folder. 4 Create a subfolder within your Multimedia folder and name this Video. Locate and transfer your video clip from its original source to your subfolder Video. Ensure that your video clip is saved in a format suitable for web/e-mail use in your Video subfolder. 5 Create a subfolder within your Multimedia folder and name this Animation. Create an animation sequence with a minimum of 6 frames and save this in your Animation subfolder. Continued over Level 2 Assignment A V2.0 Designing and creating multimedia presentations (7266/7267-030) 3

Task C - Create a multimedia presentation 1 Create your Multimedia presentation using the resources that you have gathered ensuring that you cover all of the following items: Create a series of screens that match the number of your storyboards Import your text as specified in your design Import and or insert the images that you specified on your storyboards Include at least one speech file Include at least one music file Include one video file Include animation file Insert all navigation buttons etc. All of these items should be inserted as specified on your storyboards, identify changes on your storyboard that you make as a result of creating your multimedia presentation. Test your Multimedia presentation and ensure that all navigation links, speech files, music files, video files and animation files work as expected. Save you Multimedia as MMPresenationXX where XX is your initials. 2 Open a blank word processing document and produce a brief report giving a self evaluation of your Multimedia presentation. When you have completed your report save this as Evaluation in your Multimedia folder. Within your report give consideration to at least the following points: Did you Multimedia Presentation meet the Terms of Reference that you specified in Task A Identify the best features of you presentation Features that could be improved identified A brief summary of suitability for its intended purpose Provide a statement of any ongoing maintenance and updates that may be required. 3 Close down any open applications and shut down your PC, write your name on any printouts/storyboards etc and hand them and any removable media to your assessor. When you have finished working: Sign each document above your name and label all removable storage media with your name. Hand all paperwork and removable storage media to your assessor. If the assignment is taken over more than one period, all paperwork and removable media must be returned to the test supervisor at the end of each sitting. End of assignment 4 Level 2 Assignment A V2.0 Designing and creating multimedia presentations (7266/7267-030)

Appendix A TERMS OF REFERENCE Client name: Date received: Date required: Our reference: Designer assigned: Target audience: Purpose of project: Any special requirements: Resources required: Hardware requirements: Software requirements: Constraints of production: Level 2 Assignment A V2.0 Designing and creating multimedia presentations (7266/7267-030) 5

Appendix B Screen Number Screen Purpose STORYBOARD Date: Legend: Navigation (to web sites etc which is not included on the master slide) Production Notes how the sound files are used (on mouse click/automatic etc) how the video file is used (on mouse click/automatic etc) animation features used (on mouse click/automatic etc) any other special feature on this screen 6 Level 2 Assignment A V2.0 Designing and creating multimedia presentations (7266/7267-030)

Published by City & Guilds 1 Giltspur Street London EC1A 9DD T +44 (0)20 7294 2468 F +44 (0)20 7294 2400 www.cityandguilds.com City & Guilds is a registered charity established to promote education and training Level 2 Assignment A V2.0 Designing and creating multimedia presentations (7266/7267-030) 1