EMC DiskXtender File System Manager for UNIX/Linux Release 3.5 Console Client for Microsoft Windows Installation Guide P/N 300-009-578 REV A01 EMC Corporation Corporate Headquarters: Hopkinton, MA 01748-9103 1-508-435-1000 www.emc.com
Copyright 2004-2009 EMC Corporation. All rights reserved. Published October 2009 EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice. THE INFORMATION IN THIS PUBLICATION IS PROVIDED AS IS. EMC CORPORATION MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Use, copying, and distribution of any EMC software described in this publication requires an applicable software license. For the most up-to-date listing of EMC product names, see EMC Corporation Trademarks on EMC.com. All other trademarks used herein are the property of their respective owners. 2 EMC DiskXtender File System Manager for UNIX/Linux 3.5 Console Client for Windows Installation Guide
Contents Preface...5 Chapter 1 Chapter 2 Chapter 3 Introduction Overview... 10 Management domain... 10 Installation Installing Console Client... 14 How to install... 14 Uninstalling Console Client... 16 How to uninstall... 16 Starting Console Client Starting Console Client... 18 How to start Console Client... 18 Resolving display problems... 20 EMC DiskXtender File System Manager for UNIX/Linux 3.5 Console Client for Windows Installation Guide 3
Contents 4 EMC DiskXtender File System Manager for UNIX/Linux 3.5 Console Client for Windows Installation Guide
Preface As part of an effort to improve and enhance the performance and capabilities of its product line, EMC from time to time releases revisions of its hardware and software. Therefore, some functions described in this guide may not be supported by all revisions of the software or hardware currently in use. For the most up-to-date information on product features, refer to your product release notes. If a product does not function properly or does not function as described in this guide, please contact your EMC representative. Audience This guide is part of the EMC DiskXtender File System Manager for UNIX/Linux (FSM), release 3.5 documentation set, and is intended for use by system administrators. Readers of this guide are expected to be familiar with the following topics: Their organization s data archiving strategy, in particular: Average archived file size. Anticipated total number of files and total bytes to be archived. File access norms: frequency of access during creation, edit, and archive phases. Special file requirements, such as for shorter access times, multiple fail-safe copies, and optimal file stub size. Backup strategies for data in the file systems. EMC DiskXtender File System Manager for UNIX/Linux 3.5 Console Client for Windows Installation Guide 5
Preface The network details of all computer systems and hardware devices to be used, including: IP addresses. TCP/IP routing information. Switch, router, firewall, and network-attached device configurations. The administration details of all involved storage targets. Organization Related documentation Conventions used in this guide Here is a list of where information is located in this guide: Chapter 1, Introduction, provides an overview of FSM and Console Client. Chapter 2, Installation, explains the steps that you take to install Console Client on Windows. Chapter 3, Starting Console Client, describes how to start Console Client. Related documents include: Installation guides for these supported operating systems: AIX HP-UX Linux Solaris Administrator s guide EMC uses the following conventions for notes and cautions. Note: A note presents information that is important, but not hazard-related.! IMPORTANT A caution contains information essential to avoid data loss or damage to the system or equipment. The caution may apply to hardware or software. 6 EMC DiskXtender File System Manager for UNIX/Linux 3.5 Console Client for Windows Installation Guide
Preface Typographical conventions EMC uses the following type style conventions in this document: Normal Used in running (nonprocedural) text for: Names of interface elements (such as names of windows, dialog boxes, buttons, fields, and menus) Names of resources, attributes, pools, Boolean expressions, buttons, DQL statements, keywords, clauses, environment variables, functions, utilities URLs, pathnames, filenames, directory names, computer names, filenames, links, groups, service keys, file systems, notifications Bold Italic Courier Courier bold Used in running (nonprocedural) text for: Names of commands, daemons, options, programs, processes, services, applications, utilities, kernels, notifications, system calls, man pages Used in procedures for: Names of interface elements (such as names of windows, dialog boxes, buttons, fields, and menus) What user specifically selects, clicks, presses, or types Used in all text (including procedures) for: Full titles of publications referenced in text Emphasis (for example a new term) Variables Used for: System output, such as an error message or script URLs, complete paths, filenames, prompts, and syntax when shown outside of running text Used for: Specific user input (such as commands) Courier italic Used in procedures for: Variables on command line User input variables <> Angle brackets enclose parameter or variable values supplied by the user [] Square brackets enclose optional values Vertical bar indicates alternate selections - the bar means or {} Braces indicate content that you must specify (that is, x or y or z)... Ellipses indicate nonessential information omitted from the example EMC DiskXtender File System Manager for UNIX/Linux 3.5 Console Client for Windows Installation Guide 7
Preface Where to get help EMC support, product, and licensing information can be obtained as follows. Product information For documentation, release notes, software updates, or for information about EMC products, licensing, and service, go to the EMC Powerlink website (registration required) at: http://powerlink.emc.com Technical support For technical support, go to EMC Customer Service on Powerlink. To open a service request through Powerlink, you must have a valid support agreement. Please contact your EMC sales representative for details about obtaining a valid support agreement or to answer any questions about your account. Your comments Your suggestions will help us continue to improve the accuracy, organization, and overall quality of the user publications. Please send your opinion of this document to: SSGdocumentation@emc.com 8 EMC DiskXtender File System Manager for UNIX/Linux 3.5 Console Client for Windows Installation Guide
1 Introduction This chapter addresses the following topic related to using Console Client on a Windows computer: Overview... 10 Introduction 9
Introduction Overview EMC DiskXtender File System Manager for UNIX/Linux (FSM), release 3.5 is a data management solution that uses DMAPI-enabled (UTDM) file systems to transparently archive data on the following backend storage systems: EMC Centera Content Addressed Storage System (Centera System) Locally accessible disk resources It combines the ease of use of locally mounted file systems with automatic data migration and purging. The transparent migration and purging operations performed by FSM: Reduce file system space requirements. Maintain file system-level availability of data for all operations. Utilize scalable, reliable, and secure backend systems for data storage. An FSM administrator primarily manages the file systems through the FSM Console Client (Console Client). Console Client is a Java application for working with FSM hosts and UTDM file systems. This guide describes how to install the Microsoft Windows version of Console Client. After completing the steps in this guide, the software is installed, and may be used to manage UTDM file systems. The section Related documentation on page 6, provides information about additional documents concerning the following topics: Starting Console Client Logging in to a management domain Installing and setting up UTDM file systems Configuring UTDM file systems Managing file system data Management domain A management domain is a logical grouping of computers that host UTDM file systems (FSM hosts). In a management domain, all FSM hosts are controlled by the same FSM Console Server (Console Server). 10 EMC DiskXtender File System Manager for UNIX/Linux 3.5 Console Client for Windows Installation Guide
Introduction A management domain consists of the following essential pieces: Console Server FSM Console Client (Console Client) FSM host, with the following: FSM core processes (core processes) FSM Console Agent (Console Agent) UTDM file system Backend system Note: More FSM hosts may be added. This release requires that you install a permanent license on every FSM host. You can set a management domain entirely on one computer or on multiple computers. Single computer Multiple computers To set up a management domain on a single computer, you perform the following installation tasks: Ensure the computer meets the installation requirements. Install the core processes, Console Server, and Console Agent. Install the Console Client. Prepare the UTDM file systems. Configure the UTDM file systems. Perform any necessary configuration of the backend system. A management domain can consist of many computers. All of the computers must have TCP/IP communication with the Console Server host and the Console Client host. Console Server Console Server is a Java application that provides authentication services to the management domain. It is installed on a single computer that has TCP/IP access to all computers in the management domain. Normally, Console Server is installed with the core processes and Console Agent software on one of the FSM hosts. You can install it on a separate host. The computer on which Console Server is installed may also have Console Client installed. Overview 11
Introduction Console Client Console Client is a Java application that you install on computers with TCP/IP access to the management domain. Console Client simplifies the administrative tasks for the domain, including creation, configuration, management, and monitoring of the domain s UTDM file systems. You install Console Client on every computer that is used to administer UTDM file systems. It may be active on several computers at the same time. The Console Client may run on an FSM host computer or on a separate computer. FSM host A computer acting as an FSM host must have TCP/IP communication with the Console Server host and the Console Client host. FSM hosts need not have TCP/IP communication with other FSM hosts. Each FSM host must have the following management domain components: Console Agent The Console Agent is a Java application that interacts with the processes and file systems on an FSM host computer (FSM host). Core processes At least one UTDM file system 12 EMC DiskXtender File System Manager for UNIX/Linux 3.5 Console Client for Windows Installation Guide
2 Installation This chapter provides information on the following topic: Installing Console Client... 14 Installation 13
Installation Installing Console Client The installation of Console Client on a Windows computer requires the following: Windows host with TCP/IP communication with the FSM Console Server and all file system hosts in the management domain Transfer of the Console Client installation file to the Windows host Running the Console Client installation application on the Windows computer The guides listed in Related documentation on page 6, provide additional information about the other tasks required to set up an FSM management domain. To install Console Client on a Windows computer use the application FSMClient.exe. This launches a graphical installer. How to install To install Console Client: 1. Transfer FSMClient.exe to a temporary directory on the Windows host. FSMClient.exe is provided as part of the set of FSM installation files. It is located in the directory: /install-dir/installers/windows where /install-dir is the top-level directory of the installation files. 2. Log in to the Windows host with Administrator privileges. 3. Double-click FSMClient.exe. The welcome window appears. 4. Click Next. The License Agreement window appears. Read the license agreement. You must agree to the terms of the license agreement to continue the installation. 5. Select I accept the agreement, and click Next. The Installation Directory window appears. 14 EMC DiskXtender File System Manager for UNIX/Linux 3.5 Console Client for Windows Installation Guide
Installation 6. Type the full path to the directory in which to install FSM, and click Next. The default path is: C:\Program Files\File System Manager Console Client The Ready to Install window appears. 7. Click Next. Console Client is installed. The Completing the File System Manager Console Client Setup Wizard window appears. 8. Click Finish. The installer closes. Console Client is installed and ready to use. Installing Console Client 15
Installation Uninstalling Console Client To uninstall Console Client you use the Windows Add or Remove Programs wizard. How to uninstall To uninstall Console Client: 1. Open the Windows Add or Remove Programs wizard and select: Start > Settings > Control Panel > Add or Remove Programs 2. Find the File System Manager Console Client entry, and click Change/Remove. A Question box appears. 3. Click Yes. The software is uninstalled and unregistered. An Info box appears. 4. Click OK. The uninstall is complete. 16 EMC DiskXtender File System Manager for UNIX/Linux 3.5 Console Client for Windows Installation Guide
3 Starting Console Client This chapter contains the following information: Starting Console Client... 18 Resolving display problems... 20 Starting Console Client 17
Starting Console Client Starting Console Client Once Console Client is installed, you can start it, and use it to configure and manage file systems. Console Client uses an encrypted username/password combination (account) to authenticate Console Client users and determine permissions. A default administrative account is provided with Console Client. This default account has the username system and the password system. To increase the security of the management domain, the password for this account should be changed immediately. The administrator s guide provides more information on changing the password. How to start Console Client To start Console Client: 1. Click the Windows Start menu entry for Console Client. Start > Programs > File System Manager Console Client The Login to DiskXtender File System Manager window appears. 2. In Username, type a username. The default username is system. 3. In Password, type a password. The default password is system. Note: You should change the default password for the system account as soon as possible. The administrator s guide provides more information on how to do this. 4. In FSM Server, type the hostname or IP address of the management domain s Console Server host. The FSM Server entry must meet the following criteria: The FSM server s hostname must be resolvable by the naming service used by the Console Client host. The IP address must be in either standard IPv4 or IPv6 format. 18 EMC DiskXtender File System Manager for UNIX/Linux 3.5 Console Client for Windows Installation Guide
Starting Console Client 5. Click OK. The main Console Client window appears. The administrator s guide provides more information on using Console Client to configure file systems. Starting Console Client 19
Starting Console Client Resolving display problems After starting Console Client, you may find that the display appears slightly out of alignment. This occurs when the computer on which you are running Console Client does not have the necessary fonts. To resolve this problem: 1. Open the font.properties file in a plain text editor, such as Notepad. Assuming that Console Client was installed in the default installation directory, this file is located at: C:\Program Files\File System Manager Console Client\jre\lib\font.properties 2. Check that each font listed in the Font File Names section of font.properties is listed in the Windows Fonts folder. 3. Add any missing font files to the Fonts folder. Note: Each font filename must be identical to the name listed in the font.properties file. However, filenames on Windows computers are not case sensitive. 20 EMC DiskXtender File System Manager for UNIX/Linux 3.5 Console Client for Windows Installation Guide