Mgmnt Console M/S Rdy Pwr 1 2 3 4 NETWORK N(a) N(b) INLINE TOOL T(a) T(b) GigaLINK-Cu GigaLINK-SR GigaLINK-ER The Smart Route To Visibility Gigamon Systems Giga PORT Giga TAP-Tx Giga TAP-Sx Split Ratio :70/30 GigaTAP-BPC ByPass Tap FRONT BACK Product Description GigaVUE-420 CU: modular base unit with a fixed management module containing 4 10/100/1000 Ethernet copper ports, a 10/100/1000 Ethernet management port, and a Cisco compatible serial port. Base unit expandable up to 20GbE ports using 4 optional modules in front, and up to 4 optional 10GbE Ethernet modules in the rear. The front slots accept GigaPORT, GigaTAP-Tx, GigaTAP-BPC and/or GigaTAP-SX/LX/ ZX port expansion modules. The rear slots accept 10GbE GigaLINK-XR, 10GbE GigaLINK-CU modules as 10GbE stacking/network/tool ports. All open front and rear expansion slots require blank covers installed to maintain proper system cooling and product warranty. Power: dual redundant hot swappable load-sharing AC or DC power supplies. Cooling: dual redundant hot swappable, field replacable, & GigaLINK-SFP+ cooling fans. GigaVUE-420 FO: similar to GigaVUE-420 CU but with 4 fiber optic GbE ports instead. *See ordering information on page 2. Included Accessories Rack mount kit with front and rear rack mounting brackets; Two North American AC modular power cords for AC unit; serial console cable (Cisco compatible). Table 1 : GigaVUE-420 Physical Weight & Dimensions Feature Height Width Depth Weight Chassis 1.75 (4.45 cm.) 17.31 (43.97 cm.) 23.50 (59.69 cm.) System: 30.8 lbs. ( 13.97 kg.) Shipping: 45 lbs. (20.41 kg.) *Add 2 inches (5.1cm) to depth when 10GigaTAP module is installed. Table 2 : Electrical Characteristics Power Supply Type Power Supply Types Heat/Power Dissipation Voltage Current (nominal) Current (surge) Frequency Specification Dual 1+1 redundant hot swappable power supplies, AC or DC. Fully populated 20+4 port system with all ports at 100% traffic load: nominally 160Watts/546 BTU/hr AC power modules: 100 to 240V AC. Fuse rating: internally protected, not user accessible DC power modules: -36 to -72V DC. Inputs reverse polarity protected For DC source: optional external fuse rating: 6 Amps Slow-Blo 1.45A @ 110V AC / 3.33A @ -48V DC 5A @ 110V AC 50/60 Hz for AC
Table 3 : General Product Information Type Description Mounting Mounts in an EIA-standard 19 inch or 24 inch telco rack or equipment cabinet. Front and rear mounting brackets included Standard Ports and Expansions GigaVUE-420 CU base unit: 4 Ethernet 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE802.3ab 1000Base-T Gbps Ethernet). GigaVUE-420 FO base unit: 4Gbps Fiber Optic Ethernet ports (IEEE 802.3z). All base unit includes: (1) 10/100/1000 Base-T RJ45 Ethernet management port (1) RS-232 console port with RJ45 connector, Cisco compatible. All Ethernet ports and management port support Auto-MDIX, auto-negotiation. Front expansion slots: four, each accommodate a single GigaPORT, GigaTAP-Tx, GigaTAP-BPC, GigaTAP-SX/LX/ZX module. Rear expansion slots: four 10Gbps Ethernet GigaLINK expansion slots, accommodates up to four GigaLINK-CU, GigaLINK-SFP+, or GigaLINK-XR (IEEE 802.3ae) modules, or up to two 10GigaTAP-XR modules. Optional Modules Four-port GbE modules: GigaPORT, GigaTAP-TX, GigaTAP-SX/LX/ZX, GigaTAP-BPC Ten-port GbE modules: GigaLINK-CU, GigaLINK-XR, 10GigaTAP-XR. [NEW] GigaLINK-SFP+ Safety UL 60950-1; CSA C22.2 EN 60950-1 Emissions FCC Part 15, class A; VCCI class A; EN55022/CISPR-22 class A; Australia/New Zealand AS/NZS CISPR-22 class A; CE Mark EN 55022 class A Immunity ETSI EN 300 386 V1.3.2, EN 61000-4-2, EN 61000-4-3, EN61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-3-2 Environment RoHS compliance All GigaVUE-420 products are RoHS compliant. Operating temperature 32ºF to 104ºF (0ºC to 40ºC) Operating relative humidity 20% to 80%, non-condensing Non-operating/storage temperature -4ºF to 158ºF (-20ºC to 70ºC) Non-operating/storage relative humidity 15% to 85%, non-condensing Altitude Up to 15,000ft. (4.6km) Air Flow Front bottom (cold) to top rear (hot) Performance Port to port throughput: Wire speed per port, no degradation when filters/maps are applied. Packet Latency:(typical) 10Gbps to 10Gbps : 3.1 microseconds 1Gbps to 1Gbps : 10.5 microseconds
Front Module Information GigaPORT expansion module GigaTAP-TX dual tap module GigaTAP-SX/LX/ZX dual TAP module (MM or SM) GigaTAP-BPC bypass TAP module Front Plug-in Module Specifications INO UT NETWORK N(a) N(b) INLINE TOOL T(a) T(b) Giga PORT Giga TAP-Tx Giga TAP-Sx SplitR atio :70/30 GigaTAP-BPC ByPass Tap Ports Four, each can be set Four RJ-45 ports organized Four optical splitter ports. Four RJ-45 ports organized as RJ-45 Ethernet as two pairs; each pair taps Module taps two GbE MM network pair and in-line (10/100/1000 Base-T), or a single10/100/1000 Base-T or SM FDX fibers. Split ratio bypass pair; network pair GbE SX/LX with multi- FDX Ethernet UTP link 70/30 taps a single10/100/1000 mode or singlemode SFP Base-T FDX Ethernet UTP module(s) link. In-line bypass link connects to in-line tool Link Tap Mechanism Not recommended for link Relays open link for tapping Passive optical splitters Relays open link for tapping tapping taps Power Fail Protection No power fail link restore Relays close link for power fail link restore Total Links Tapped Per Module Maximum two FDX UTP links tapped per module Power fail does not impact link status Maximum two FDX fiber inks tapped per module Relays close link for power fail link restore Maximum one FDX UTP links tapped per module and one pair in-line tool links Physical Characteristics Dimensions 1.50(h) x 3.25(w) x 10.62(d) 1.50(h) x 3.25(w) x 10.62(d) 1.50(h) x 3.25(w) x 10.62(d) 1.50(h) x 3.25(w) x 10.62(d) inches (3.9 x 8.3 x 26.7cm) inches (3.9 x 8.3 x 26.7cm) inches (3.9 x 8.3 x 26.7cm) inches (3.9 x 8.3 x 26.7cm) Weight 1lb. 2oz. (0.55kg) 1lb. 1oz. (0.5kg) 1lb. 9oz. (0.7kg) 1lb. 1oz. (0.5kg) Optional Accessories SFP (optical transceiver): -SX 850nm (550m) -LX 1310nm (10km) -ZX 1550nm (40km) *Performance throughput, environment, safety, emissions, immunity, & standards/protocols for modules are the same as the specifications on page 2
Rear Module Information GigaLINK-SFP+ (10Gigabit optical module) GigaLINK-CU (10Gigabit copper module) 10GigaTAP-SR/LR/ER (10Gigabit optical tap module) Rear 10Gbps Ethernet Plug-in Module Specifications LINK IN OUT LINK PWR Gi ga LI NK -S FP + OUT IN Connectivity/Distance SFP+ (10GbE optical transceiver) -SR 850nm (300m) -LR 1310nm (2km standard, 10km special order) -ER 1550 nm (40km standard, 80km special order) Optional: stacking cable: CX4 copper cable -5m (standard) -1 or 10 or 15m (special order) A pair of internal passive optical splitters (50/50 split ratio) tap a 10Gigabit full duplex fiber link Three types of 10GE fiber links supported: -SR 850nm multimode -LR 1310nm singlemode -ER 1550nm singlemode Ports 1 x 10GbE SFP+ fiber optic port 1 x 10GbE copper CX4 port Taps a single Full Duplex 10GbE Fiber Link. Requires two 10Gbps port slots Physical Characteristics Dimensions 1.5(h) x 1.3(w) x 5.0(d) inches (3.8 x 3.3 x 12.7cm) 1.5(h) x 1.3(w) x 4.9(d) inches (3.8 x 3.3 x 12.4cm) 1.5(h) x 2.75(w) x 7.3(d) inches (3.8 x 7.0 x 18.2cm) *Performance throughput, environment, safety, emissions, immunity, & standards/protocols for modules are the same as the specifications on page 2
Optical Transceiver Specifications (SFP) Description GIGABIT-SX SFP With one 1000Base-SX port; designed for short-distance (<550m max.) multimode 850nm fiber connectivity GIGABIT-LX SFP With one 1000Base-LX port; designed for long-distance singlemode 1310nm fiber connectivity, will support multimode fiber connectivity to limited distances GIGABIT-ZX SFP With one 1000Base-ZX port; designed for long-distance signal mode 1550nm fiber connectivity SFP+ With one 1000Base-ZX port; designed for long-distance signal mode 1550nm fiber connectivity SFP Port One 1000Base-SX port (IEEE 802.3z Type 1000Base-SX, 850nm multimode) Duplex: full Connectors: LC One 1000Base-LX port (IEEE 802.3z Type 1000Base-LX, 1310nm singlemode) Duplex: full Connectors: LC One 1000Base-ZX port (no IEEE standard exists for 1550nm optics) Duplex: full Connectors: LC Physical Characteristics Dimensions: 0.486(h) x 0.54(w) x 2.24(d) inches (1.23 x 1.37 x 5.69cm) Weight: 0.04lb. (0.02kg) Dimensions: 0.486(h) x 0.54(w) x 2.24(d) inches (1.23 x 1.37 x 5.69cm) Weight: 0.04lb. (0.02kg) Dimensions: 0.486(h) x 0.54(w) x 2.24(d) inches (1.23 x 1.37 x 5.69cm) Weight: 0.04lb. (0.02kg) Optical Power & Sensitivity Tx: -9.5 to -3 Rx: -20 to 0 Tx: -9.5 to -3 Rx: -19 to 0 Tx: 0 to +5 Rx sensitivity: -23 to 0 Cabling 62.5/125 μm or 50/125 μm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, Respectively Low metal content, singlemode fiber-optic, complying with ITU-T G.652 and ISO/ IEC 793-2 Type B1 Low metal content, singlemode fiberoptic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1 Maximum Distance 220 meters (62.5μm core, 160 MHz/km) 275 meters (62.5μm core, 200 MHz/km) 500 meters (50μm core, 400 MHz/km) 550 meters (50μm core, 500 MHz/ km) 10km (singlemode fiber) 80km (singlemode fiber)
GigaVUE-420 Ordering Information Table 4 : Ordering Information Part Number GVS-421 GVS-422 GVS-423 GVS-424 Description GigaVUE-420 chassis with four (4) GbE copper ports, dual 1+1 redundant hot swap AC power supplies GigaVUE-420 chassis with four (4) GbE fiber ports, dual 1+1 redundant hot swap AC power supplies GigaVUE-420 chassis with four (4) GbE copper ports, dual 1+1 redundant hot swap DC power supplies GigaVUE-420 chassis with four (4) GbE fiber ports, dual 1+1 redundant hot swap DC power supplies PRT-400 SFP-502 SFP-503 SFP-504 GigaPORT 4-port expansion module SFP, Multimode 850nm SFP, Single Mode 1310nm SFP, Single Mode 1550nm TAP-201 GigaTAP-Tx copper UTP link TAP expansion module TAP-241 GigaTAP-Tx copper UTP link TAP expansion module TAP-202 GigaTAP-Sx, multimode, 850nm TAP expansion module TAP-203 GigaTAP-Lx, singlemode, 1310nm TAP expansion module TAP-204 GigaTAP-Zx, singlemode, 1550nm TAP expansion module TAP-GV4-X25B10 10GigaTAP-SR, 10Gbps TAP, multimode, 850nm, LC, 50/50 TAP-GV4-X35C10 10GigaTAP-LR, 10Gbps TAP, singlemode, 1310nm, LC, 50/50 TAP-GV4-X45D10 10GigaTAP-ER, 10Gbps TAP, singlemode, 1550nm, LC, 50/50 GLK-311 GigaLINK-Cu, 10Gigabit copper port module GLK-320 GigaLINK-SFP+, empty SFP+ cage, 10 Gig port module GLK-322 GigaLINK-SR -SFP+, MM 850 10 Gig port module GLK-324 GigaLINK-SR -SFP+, MM 850 10 Gig port module GLK-325 GigaLINK-ER -SFP+, SM 1550 10 Gig port module GLK-005 Stacking Cable, CX4 copper cable, 5 meters GLK-015 Stacking Cable, CX4 copper cable, 15 meters SVC-000 2nd year Standard hardware and software maintenance SVC-001 1st year Premium maintenance upgrade (24x7) SVC-002 2nd year Premium hardware and software maintenance (24x7) Copyright 2012 Gigamon, LLC. All rights reserved. Gigamon, GigaVUE, GigaSMART, G-TAP, Flow Mapping are registered trademarks of Gigamon, LLC and/or affiliates in the United States and certain other countries. Visibility Fabric, Traffic Visibility Fabric (TVF), Citrus, and The Smart Route To Visibility are trademarks of Gigamon. All other trademarks are the property of their respective owners. Gigamon 598 Gibraltar Drive Milpitas, CA 95035 PH 408.263.2022 www.gigamon.com