CertifyMe Number: 642-586 Passing Score: 800 Time Limit: 120 min File Version: 8.0 http://www.gratisexam.com/ CertifyMe 642-586
Exam A QUESTION 1 A customer in the United States requires connectivity between two campus locations that are located 6 miles (9.65 km) apart. The customer also needs a minimum data rate of 54 Mbps in an area that is known to have 2.4-GHz interference. Which two devices will provide a bridge link and avoid the interference? (Choose two.) A. Cisco Aironet 1100 Series Access Point B. Cisco Aironet 1210 Series Access Point C. Cisco Aironet 1242AG Series Access Point D. Cisco Aironet 1300 Series Outdoor Access Point/Bridge E. Cisco Aironet 1400 Series Wireless Bridge Correct Answer: CE /Reference: QUESTION 2 In controller-based architecture, a control message sent between the access point and the controller is secured using which protocol? A. AES B. TKIP C. LWAPP D. CCKM Correct Answer: A /Reference: QUESTION 3 The Cisco WLAN controller examines a variety of real-time RF characteristics to efficiently handle channel assignments. These characteristics include which three of the following? (Choose three.) A. EMI B. client RSSI C. switch load D. client load E. utilization F. noise Correct Answer: DEF /Reference: QUESTION 4
Before a Cisco Unified Wireless IP Phone 7920 can place a call, it will compare the QBSS in the beacon from the access point with the QBSS threshold on the phone. What action will the Unified Wireless IP Phone 7920 take if the QBSS threshold in the beacon is exceeded? A. place the call B. prompt network busy C. prompt number busy D. disconnect from access point /Reference: QUESTION 5 Which two statements correctly describe the Cisco Catalyst WiSM? (Choose two.) A. It supports up to 100 access points per module. B. It supports up to 200 access points per module. C. It supports up to 300 access points per module. D. It has a maximum of four modules per chassis. E. It has a maximum of five modules per chassis. F. It has a maximum of six modules per chassis. Correct Answer: CE /Reference: QUESTION 6 How is a bridge group name used in a wireless mesh deployment? A. It is used to retrieve the secret shared key. B. It logically groups access points to avoid interference from neighboring mesh networks. http://www.gratisexam.com/ C. It is used as a password in communication preceding LWAPP. D. It is used to join the outdoor mesh network with the controller mobility group. /Reference:
QUESTION 7 How many signatures does the Cisco IPS 4200 Series Sensor platform support? A. up to 1400 signatures B. 1500 to 1600 signatures C. 1600 to 1700 signatures D. more than 1700 signatures Correct Answer: D /Reference: QUESTION 8 What is the maximum number of WLAN controllers that can be supported on one instance of Cisco WCS running on a high-end server? A. 50 controllers B. 100 controllers C. 250 controllers D. 1500 controllers E. 250 controllers with up to 50 access points each F. 500 controllers with up to 25 access points each Correct Answer: C /Reference: QUESTION 9 The Newton Manufacturing Company has three facilities that are located in Columbia, South Carolina. The corporate office is located in an 11-story building downtown. The R&D facility is located on the north side of the city approximately 4 miles (6.4 km) from the corporate office in a five-story building. The manufacturing facility is located approximately 6 miles (9.6 km) to the northwest of the corporate office. Line of sight exists from the downtown office to all facilities. Users at the manufacturing plant require network connectivity for file-sharing and e-mail, while the users at the R&D facility require high-speed Internet access with the ability to send large CAD drawings to the corporate office and large machine control files to the manufacturing facility. Presently, the manufacturing facility is connected to the corporate office by a 64-kbps leased line, and the R&D facility is connected to both the corporate office and the manufacturing facility by a dedicated T1 line. The company plans to add a second line of development at the R&D facility within the next 60 days. The current T1 lines are at a constant 70 percent utilization rate. The current projected lead time for installation of additional lines is 90 days if the cable plant will support it. Which deployment option would provide the most benefit to the customer? A. point-to-point link from corporate to manufacturing, and a point-to-point link from corporate to R&D B. point-to-multipoint solution with the root bridge located at the manufacturing facility C. point-to-multipoint solution with the root bridge located at the corporate office D. point-to-multipoint solution with the root bridge located at the R&D facility Correct Answer: D
/Reference: QUESTION 10 When attempting to connect to the WLAN using HTTP authentication, a client is automatically redirected to a login page. The login page is on which device that uses the controller-based products? A. Cisco Location Appliance B. Cisco WCS C. access point D. wireless LAN controller Correct Answer: D /Reference: QUESTION 11 A wireless security assessment has been performed for a network that is composed of Windows 2000 and Windows XP wireless clients. The customer wishes to use IEEE 802.1X authentication using certificate services. Which EAP-type combinations are appropriate? A. PEAP-GTC and EAP-MD5 B. PEAP-MSCHAP and EAP-TLS C. PEAP-MSCHAP and EAP-SIM D. EAP-Cisco Wireless (Cisco LEAP) and PEAP-GTC /Reference: QUESTION 12 A customer has a small remote site with 10 standalone access points. In which two of the following scenarios would it be appropriate to implement CiscoWorks WLSE Express? (Choose two.) A. EAP-Cisco Wireless (Cisco LEAP) security is required and an external AAA server is available. B. EAP-Cisco Wireless (Cisco LEAP) security is required and no external AAA server is available. C. EAP-FAST security is required and no external AAA server is available. D. EAP-FAST security is required and an AAA server is available. E. MAC authentication is required and no external AAA server is available. F. MAC authentication is required and an external AAA server is available. C /Reference:
QUESTION 13 Which of the following statements are true regarding the benefits of the guest tunnel and auto-anchor mobility features of WLAN controllers? (Choose three.) A. They allow the implementation of geographic access policies, which can restrain client traffic to a specific subnetwork, regardless of its physical location. B. Prime application is "guest WLAN," in which it is desirable to limit guest access to the corporate network by first passing through the corporate firewall, maintaining consistent security policies. C. The auto-anchor mobility feature tunnels all client traffic from a specific WLAN (SSID) to a specific WLAN controller to provide a physical IP point of presence. D. Only one controller may be specified as the mobility anchor for a given WLAN. E. All WLAN controllers can be configured for either side of the tunnel as the foreign or anchor controllers. F. Client traffic travels an asymmetric path. Correct Answer: ABC /Reference: QUESTION 14 OFDM provides which improvement over DSSS in the 2.4-GHz range? A. greater resistance to multipath interference B. more nonoverlapping channels C. more bandwidth per channel D. full-duplex communication Correct Answer: A /Reference: QUESTION 15 Which two threat categories are reported in a security summary display by the WCS? (Choose two.) A. spam B. malware C. rogue access points D. deauth flood attacks E. out-of-date antivirus definitions Correct Answer: CD /Reference: QUESTION 16
The recommended channel utilization QoS Basic Service Set load for a VoIP network should be less than which value? A. 35 B. 40 C. 45 D. 50 Correct Answer: C /Reference: QUESTION 17 How many VLANs are supported on the Cisco Aironet 1242AG Series Access Point in controller-based networking? A. 8 B. 12 C. 16 D. 20 Correct Answer: A /Reference: QUESTION 18 Which authentication mechanism was introduced in Cisco Compatible Extensions version 2? A. AES B. Cisco Key Integrity Protocol and Cisco MIC C. PEAP-GTC D. EAP-Cisco Wireless (Cisco LEAP) Correct Answer: C /Reference: QUESTION 19 How many SSIDs are supported on a standalone access point with dual radios? A. 8 B. 12 C. 16 D. 20 Correct Answer: C
/Reference: QUESTION 20 Which two individual user parameters can be restricted by administrators of controller-based wireless networking using Identity Based Networking Services? (Choose two.) A. IP restrictions B. RF utilization C. time restrictions D. password length enforcement E. WLAN assignment Correct Answer: AB /Reference: QUESTION 21 As a result of a security site survey, the following is discovered: An RF signal is available in the parking lot. Six access points are found belonging to employees. Static WEP keys are in use in the receiving department. No security is being used on the access points in human resources. Wireless VoIP clients in use do not support EAP-FAST. There is no strong password policy in place. EAP-Cisco Wireless (Cisco LEAP) is being used for wireless VoIP security. All clients can support WPA. VLANs are in use. Based on these findings, what is recommended to enhance the security of the wireless VoIP network? A. enable static WEP on access points that are supporting wireless VoIP traffic B. create a separate management VLAN C. enable EAP-FAST authentication D. enforce a strong password policy Correct Answer: D /Reference: QUESTION 22 Which EAP authentication method is used by the Cisco WLAN controller to perform web authentication? A. EAP-TLS B. EAP-MD5 C. PEAP-GTC
D. PEAP-MSCHAP E. No EAP authentication is used Correct Answer: E /Reference: QUESTION 23 What is the maximum round-trip delay that an H-REAP will tolerate from a centralized controller? A. 100 milliseconds B. 500 milliseconds C. 1000 milliseconds D. 1500 milliseconds Correct Answer: A /Reference: QUESTION 24 Which three of these items are key components of a site survey? (Choose three.) A. documentation B. facility walkthrough C. coverage verification D. access point staging E. client configuration F. pre-survey assessment Correct Answer: ABF /Reference: QUESTION 25 Which one of the following integrated services routers supports the integrated 2.4-GHz b/g access points? A. Cisco 1812 B. Cisco 1811 C. Cisco 1841 D. Cisco 1803 Correct Answer: C /Reference:
QUESTION 26 Which feature was introduced in Cisco Compatible Extensions version 2? A. EAP-Cisco Wireless (Cisco LEAP) B. radio management C. EAP-FAST D. WMM /Reference: QUESTION 27 Controller-based products use X.509 certificates for which of the following? A. LWAPP tunneling B. AES user data frame encryption C. 3DES user data frame encryption D. IPsec tunneling Correct Answer: A /Reference: QUESTION 28 What is the Cisco-recommended signal-to-noise ratio for a data rate of 54 Mbps on a 2.4-GHz data network? A. 30 db B. 25 db C. 35 db D. 40 db Correct Answer: C /Reference: QUESTION 29 Which three settings should be set on the WLAN controller for a VoIP network designed for Cisco Unified Wireless IP Phone 7920? (Choose three.) A. platinum QoS B. gold QoS C. multicast-enabled D. multicast-disabled
E. AES encryption F. TKIP encryption Correct Answer: ADF /Reference: QUESTION 30 Which four criteria does the Cisco Unified Wireless IP Phone 7921G use to associate with the access point? (Choose four.) A. highest RSSI B. lowest RSSI C. highest QBSS D. lowest QBSS E. same SSID F. same encryption Correct Answer: ADEF /Reference: QUESTION 31 A customer brings you a previously completed site survey for the initial wireless implementation from 12 months ago. The customer currently has six access points deployed in the warehouse. The survey shows that the installed coverage provides for a 15-percent overlap between cells at 5.5 Mbps, and a 5-percent overlap at 11 Mbps. This solution has proved to provide adequate coverage and roaming capabilities for the data applications.why would this site survey not be adequate for a VoIP application? A. inadequate QoS B. inadequate overlap C. inadequate data rate D. inadequate throughput /Reference: QUESTION 32 What is the Cisco-recommended limit of standalone access points to be managed by a CiscoWorks WLSE 1130-19 with RF management enabled? A. 1000 B. 1500 C. 1800 D. 2500
Correct Answer: C /Reference: QUESTION 33 What is the Cisco-recommended signal-to-noise ratio for a data rate of 54 Mbps on a 5-GHz data network? A. 25 db B. 30 db C. 35 db D. 40 db /Reference: QUESTION 34 Which three items are associated with the controller-based feature set products? (Choose three.) A. Wireless Services Module B. Cisco Aironet 1400 Series Wireless Bridge C. Cisco Wireless Control System D. access point based authentication services E. CiscoWorks Wireless LAN Solution Engine F. Cisco Aironet 1000 Series Lightweight Access Point Correct Answer: ACF /Reference: QUESTION 35 The source port of LWAPP Layer 3 data traffic is UDP port 1024 or greater. What is the destination port? A. 12222 B. 12223 C. 12224 D. 12225 Correct Answer: A /Reference:
QUESTION 36 The CiscoWorks Wireless LAN Solution Engine uses which protocol for radio management? A. CCKM B. LWAPP C. SNMP D. WLCCP Correct Answer: D /Reference: QUESTION 37 At the end of the time frame set by the Lobby Ambassador for the guest user account to be active, which of the following actions must be taken by the administrator regarding the deletion of the account, if it exists on multiple controllers? A. The administrator must delete the account from the local net user database on all controllers. B. The administrator must delete the template from the Cisco WCS. C. Take no action, the WLAN controller will generate an SNMP trap and delete the account. D. Take no action, the WLAN controller will generate an SNMP trap and the Cisco WCS will delete the account. Correct Answer: D /Reference: QUESTION 38 When IPS sensors identify a properly authenticated wireless client who is attempting to introduce a network virus into your environment, they alert the controller to perform which of the following actions? A. contain the client B. transfer the client into a quarantine VLAN C. trigger an alert D. shun the client http://www.gratisexam.com/ Correct Answer: D /Reference:
QUESTION 39 Why is a separate voice VLAN recommended when you use the Cisco Unified Wireless IP Phone 7920? A. The voice VLAN can provide Layer 3 fast secure roaming. B. The Cisco Unified Wireless IP Phone 7920 uses IEEE 802.11b. C. Appropriate ACLs can be applied to the voice VLAN. D. Quality of service can be applied to the voice VLAN. Correct Answer: C /Reference: QUESTION 40 When deploying wireless networks, a trade-off must often be made between the cost of the initial network deployment and the percentage of areas with marginal service or coverage holes. Which of the following represents a reasonable coverage hole percentage for a network launch? A. 5-15 percent B. 0-2 percent C. 0-10 percent D. 10-15 percent Correct Answer: C /Reference: QUESTION 41 Which two threats are detected by means of the Cisco Network Admission Control? (Choose two.) A. spam B. malware C. rogue access points D. denial-of-service attacks E. out-of-date antivirus definitions E /Reference: QUESTION 42 Implementing Wireless Domain Services on an autonomous access point provides which two benefits? (Choose two.) A. VLAN support
B. quality of service C. fast secure roaming D. radio management E. local authentication services Correct Answer: CD /Reference: QUESTION 43 Which three wireless intrusion-prevention signatures are part of the standard signature set provided by the Wireless LAN Controller? (Choose three.) A. ad-hoc network detection B. rogue network detection C. rogue access point detection D. deauth flood detection E. fake access point detection F. NetStumbler detection Correct Answer: DEF /Reference: QUESTION 44 Which statement describes how RSSI information is processed in a WLAN with a location appliance using controller-based products? A. Access points aggregate RSSI information. B. WLAN controllers compute RSSI information. C. The location appliance collects the RSSI information. D. The Cisco WCS collects and aggregates the RSSI information and forwards it to the location appliance. Correct Answer: C /Reference: QUESTION 45 A customer employs a Cisco 4404 Wireless LAN Controller, supporting 100 access points across four distribution ports. They are also using link aggregation on this controller. Which three of the following statements are true about Link Aggregation for this customer? (Choose three.) A. If only one functional physical link survives, only 48 access points will be supported on the link. B. If any single link goes down, traffic will migrate to the user-configured backup port. C. If only one functional physical link survives, all 100 access points will be supported on the link. D. Only one functional physical port is needed for the controller to pass client traffic.
E. Eliminates the need to configure primary and backup ports for each interface. F. Requires multiple access point-manager interfaces. Correct Answer: CDE /Reference: QUESTION 46 How many mesh access points can be placed on a map with efficient link rendering in Cisco WCS? A. 50 B. 100 C. 150 D. 200 /Reference: QUESTION 47 Cisco Secure ACS ensures enforcement of which three assigned policies by the administrator? (Choose three.) A. who can log into the network or access the network B. the placement of access points on a map C. the privileges each user has in the network D. the assignment of users to an access point E. the accounting information recorded in terms of security audits or account billing F. the creation and management of mobility groups Correct Answer: ACE /Reference: QUESTION 48 If the Cisco WLAN controller cannot reach the primary AAA server, it will proceed to the next server on the list by priority index. The Cisco WLAN controller will return to the primary AAA server, when reachable, upon which of these events? A. The primary server has just become reachable. B. The secondary server is unreachable. C. The primary server has been active for a preset dead-server time. D. The secondary server has been used for a preset dead-server time.
/Reference: QUESTION 49 The Cisco WCS logs which two security events? (Choose two.) A. security misconfigurations on the controller B. wireless protocol analyzer detection C. rogue access points D. TKIP and MIC failures E. rogue clients Correct Answer: CE /Reference: QUESTION 50 Which WEP key protection method was introduced in Cisco Compatible Extensions version 1? A. AES B. Cisco Key Integrity Protocol and Cisco MIC C. TKIP and MIC D. EAP-Cisco Wireless (Cisco LEAP) /Reference: QUESTION 51 Which two key features are unique to the controller-based feature set? (Choose two.) A. fast secure roaming B. rogue access point detection C. access point participation in RF management D. access point registration via digital certificate E. dynamic RF control without a dedicated management platform Correct Answer: DE /Reference: QUESTION 52 The Cisco WCS makes WLAN configuration, monitoring, and management as simple and effective as wired systems management. Which three functions are associated with core capabilities of the Cisco WCS?
A. RADIUS authentication B. software updates C. ACL enforcement D. network mapping E. management of Cisco Clean Access F. customized reports DF /Reference: QUESTION 53 The Newton manufacturing company has three facilities that are located in Columbia, South Carolina. The corporate office is located in an 11-story building downtown. The R&D facility is located on the north side of the city approximately 4 miles (6.4 km) from the corporate office in a five-story building. The manufacturing facility is located approximately 6 miles (9.6 km) to the northwest of the corporate office. Line of sight exists from the downtown office to all facilities. Users at the manufacturing plant require network connectivity for file sharing and e-mail, while the users at the R&D facility require high-speed Internet access with the ability to send large CAD drawings to the corporate office and large machine control files to the manufacturing facility. Presently, the manufacturing facility is connected to the corporate office by a 64-kbps leased line, and the R&D facility is connected to both the corporate office and the manufacturing facility by a dedicated T1 line. The company plans to add a second line of development at the R&D facility within the next 60 days. The current T1 lines are at a constant 70- percent utilization rate. The current projected lead time for installation of additional lines is 90 days if the current cable plant will support it. A wireless bridging solution would provide which three benefits to the customer? (Choose three.) A. rapid deployment B. immunity to weather C. increased bandwidth D. guaranteed bandwidth E. increased security F. lower total cost of ownership Correct Answer: ACF /Reference: QUESTION 54 Which three items are associated with the wireless standalone product set? (Choose three.) A. Wireless LAN Context Control Protocol B. Lightweight Access Point Protocol C. Wireless Domain Services D. Cisco Wireless Control System E. CiscoWorks Wireless LAN Solution Engine Correct Answer: ACE
/Reference: QUESTION 55 Which two devices support link role flexibility? (Choose two.) A. Cisco Aironet 1400 Series Wireless Bridge B. Cisco Aironet 1300 Series Outdoor Access Point/Bridge C. Cisco Aironet 1242AG Series Access Point D. Cisco Aironet 1230AG Series Access Point E. Cisco Aironet 1100 Series Access Point Correct Answer: CD /Reference: QUESTION 56 The Cisco Wireless LAN Controller can support a maximum of how many VLANs? A. 16 VLANs, one per SSID B. 8 VLANs, one per SSID C. 512 VLANs D. 4095 VLANs E. only supports the untagged VLAN 0 Correct Answer: C /Reference: QUESTION 57 In order to prevent many common attacks against WLANs from becoming effective, Management Frame Protection should be implemented in which mode? A. infrastructure only B. client only C. client and infrastructure D. controller only E. access point only F. controller and access point Correct Answer: C /Reference:
QUESTION 58 Which DSCP value is mapped to the IEEE 802.11e user priority for voice in a Cisco WLAN? A. 34 B. 46 C. 48 D. 56 /Reference: QUESTION 59 How many prior configuration versions can be archived on the CiscoWorks WLSE? A. two B. four C. six D. eight /Reference: QUESTION 60 Cisco Identity Based Network Services used with Cisco Secure ACS provides which two of the following benefits? (Choose two.) A. high accuracy location of identity-based users B. flexible policy assignments such as per-user quotas and virtual LAN assignments C. strong mutual authentication using public key infrastructure, tokens, and smart cards D. user accounting and auditing and the ability to track and display users on a map E. both user-based and device-based identified entities mapped to policies that are centrally created and administered by Cisco WCS C /Reference: QUESTION 61 Guest tunneling is a feature used for the guest WLAN. How many tunnels can a virtual anchor WLAN controller support? A. 30 B. 40
C. 50 D. 60 E. 70 /Reference: QUESTION 62 Which two services are provided by the Cisco Unified Communications Manager? (Choose two.) A. tight integration with existing directories such as Microsoft Active Directory B. initiating a mobility call from a remote phone, such as a cellular phone C. programming an interface to external voice-processing applications D. moving back from a cellular phone to a desktop phone E. receiving an outside call on a desktop phone or a cellular phone Correct Answer: AC /Reference: QUESTION 63 What is the minimum recommended dbm when designing a VoIP network with 54-Mbps cells, and no more than one access point per overlapping channel set? A. -35 B. -56 C. -67 D. -86 /Reference: QUESTION 64 Drop
A. B. C. D. Correct Answer: /Reference: Answer: Check certifyme eengine, Download from Member Center QUESTION 65 The Cisco 3200 Series Mobile Access Router has integrated wireless support for which two FCC-approved frequency ranges? (Choose two.) A. 900 to 928 MHz B. 2.400 to 2.4835 GHz C. 4.940 to 4.990 GHz D. 5.150 to 5.250 GHz E. 5.725 to 5.825 GHz C /Reference: QUESTION 66 What is the minimum recommended dbm when designing a VoIP network with 11-Mbps cells, and no more than one access point per overlapping channel set? A. -35 B. -56 C. -67 D. -86
Correct Answer: C /Reference: QUESTION 67 When a wireless controller loses connectivity to a remote Cisco Aironet 1030 Lightweight Access Point in REAP mode, what will be the next step for that remote access point? A. lose its configuration B. disconnect all associated clients C. continue to provide local WLAN1 connectivity for shared key authentication only D. support no more than 10 wireless clients E. provide local WLAN1 connectivity using local-site AAA authentication server Correct Answer: C /Reference: QUESTION 68 Which three devices are required to implement a Cisco 2700 Series Wireless Location Appliance? (Choose three.) A. wireless controller B. wireless domain server C. Cisco Wireless Control System D. controller-based access point E. standalone access point F. CiscoWorks Wireless LAN Solution Engine Correct Answer: ACD /Reference: QUESTION 69 What is the maximum number of wireless devices that a Cisco 2700 Series Wireless Location Appliance can track, operating with Cisco WCS version 4.0? A. 500 B. 1000 C. 1500 D. 2500 Correct Answer: D
/Reference: QUESTION 70 Which feature should you implement to detect a hacker invoking denial-of-service attacks, flooding the network with associations and probes, inserting rogue access points, and affecting network performance by attacking the quality of service? A. custom signature monitoring B. Management Frame Protection C. Cisco Message Integrity Check D. NTP synchronization /Reference: QUESTION 71 The Cisco WLAN controller examines a variety of real-time RF characteristics to efficiently handle channel assignments. These characteristics include which three of the following? (Choose three.) A. EMI B. client RSSI C. switch load D. client load E. utilization F. noise Correct Answer: DEF /Reference: QUESTION 72 A wireless security assessment has been performed for a network that is composed of Windows 2000 and Windows XP wireless clients. The customer wishes to use IEEE 802.1X authentication using certificate services. Which EAP-type combinations are appropriate? A. PEAP-GTC and EAP-MD5 B. PEAP-MSCHAP and EAP-TLS C. PEAP-MSCHAP and EAP-SIM D. EAP-Cisco Wireless (Cisco LEAP) and PEAP-GTC /Reference:
QUESTION 73 OFDM provides which improvement over DSSS in the 2.4-GHz range? A. greater resistance to multipath interference B. more nonoverlapping channels C. more bandwidth per channel D. full-duplex communication Correct Answer: A /Reference: QUESTION 74 A customer brings you a previously completed site survey for the initial wireless implementation from 12 months ago. The customer currently has six access points deployed in the warehouse. The survey shows that the installed coverage provides for a 15-percent overlap between cells at 5.5 Mbps, and a 5-percent overlap at 11 Mbps. This solution has proved to provide adequate coverage and roaming capabilities for the data applications.why would this site survey not be adequate for a VoIP application? A. inadequate QoS B. inadequate overlap C. inadequate data rate D. inadequate throughput /Reference: QUESTION 75 The CiscoWorks Wireless LAN Solution Engine uses which protocol for radio management? A. CCKM B. LWAPP C. SNMP D. WLCCP Correct Answer: D /Reference: QUESTION 76 Which three items are associated with the wireless standalone product set? (Choose three.) A. Wireless LAN Context Control Protocol B. Lightweight Access Point Protocol C. Wireless Domain Services
D. Cisco Wireless Control System E. CiscoWorks Wireless LAN Solution Engine Correct Answer: ACE /Reference: QUESTION 77 Drop A. B. C. D. Correct Answer: /Reference: Answer: Check certifyme eengine, Download from Member Center QUESTION 78 How is a bridge group name used in a wireless mesh deployment? A. It is used to retrieve the secret shared key. B. It logically groups access points to avoid interference from neighboring mesh networks. C. It is used as a password in communication preceding LWAPP. D. It is used to join the outdoor mesh network with the controller mobility group. /Reference:
QUESTION 79 When attempting to connect to the WLAN using HTTP authentication, a client is automatically redirected to a login page. The login page is on which device that uses the controller-based products? A. Cisco Location Appliance B. Cisco WCS C. access point D. wireless LAN controller Correct Answer: D /Reference: QUESTION 80 A customer has a small remote site with 10 standalone access points. In which two of the following scenarios would it be appropriate to implement CiscoWorks WLSE Express? (Choose two.) A. EAP-Cisco Wireless (Cisco LEAP) security is required and an external AAA server is available. B. EAP-Cisco Wireless (Cisco LEAP) security is required and no external AAA server is available. C. EAP-FAST security is required and no external AAA server is available. D. EAP-FAST security is required and an AAA server is available. E. MAC authentication is required and no external AAA server is available. F. MAC authentication is required and an external AAA server is available. C /Reference: QUESTION 81 Before a Cisco Unified Wireless IP Phone 7920 can place a call, it will compare the QBSS in the beacon from the access point with the QBSS threshold on the phone. What action will the Unified Wireless IP Phone 7920 take if the QBSS threshold in the beacon is exceeded? A. place the call B. prompt network busy C. prompt number busy D. disconnect from access point /Reference: QUESTION 82 When attempting to connect to the WLAN using HTTP authentication, a client is automatically redirected to a login page. The login page is on which device that uses the controller-based products?
A. Cisco Location Appliance B. Cisco WCS C. access point D. wireless LAN controller Correct Answer: D /Reference: QUESTION 83 How many prior configuration versions can be archived on the CiscoWorks WLSE? A. two B. four C. six D. eight /Reference: QUESTION 84 The Cisco 3200 Series Mobile Access Router has integrated wireless support for which two FCC-approved frequency ranges? (Choose two.) A. 900 to 928 MHz B. 2.400 to 2.4835 GHz C. 4.940 to 4.990 GHz D. 5.150 to 5.250 GHz E. 5.725 to 5.825 GHz C /Reference: QUESTION 85 Which feature should you implement to detect a hacker invoking denial-of-service attacks, flooding the network with associations and probes, inserting rogue access points, and affecting network performance by attacking the quality of service? A. custom signature monitoring B. Management Frame Protection C. Cisco Message Integrity Check D. NTP synchronization
/Reference: QUESTION 86 The CiscoWorks Wireless LAN Solution Engine uses which protocol for radio management? A. CCKM B. LWAPP C. SNMP D. WLCCP Correct Answer: D /Reference: QUESTION 87 A customer has a small remote site with 10 standalone access points. In which two of the following scenarios would it be appropriate to implement CiscoWorks WLSE Express? (Choose two.) A. EAP-Cisco Wireless (Cisco LEAP) security is required and an external AAA server is available. B. EAP-Cisco Wireless (Cisco LEAP) security is required and no external AAA server is available. C. EAP-FAST security is required and no external AAA server is available. D. EAP-FAST security is required and an AAA server is available. E. MAC authentication is required and no external AAA server is available. F. MAC authentication is required and an external AAA server is available. C /Reference: QUESTION 88 Which authentication mechanism was introduced in Cisco Compatible Extensions version 2? A. AES B. Cisco Key Integrity Protocol and Cisco MIC C. PEAP-GTC D. EAP-Cisco Wireless (Cisco LEAP) Correct Answer: C /Reference:
QUESTION 89 What is the Cisco-recommended signal-to-noise ratio for a data rate of 54 Mbps on a 2.4-GHz data network? A. 30 db B. 25 db C. 35 db D. 40 db Correct Answer: C /Reference: QUESTION 90 When IPS sensors identify a properly authenticated wireless client who is attempting to introduce a network virus into your environment, they alert the controller to perform which of the following actions? A. contain the client B. transfer the client into a quarantine VLAN C. trigger an alert D. shun the client Correct Answer: D /Reference: QUESTION 91 Which two services are provided by the Cisco Unified Communications Manager? (Choose two.) A. tight integration with existing directories such as Microsoft Active Directory B. initiating a mobility call from a remote phone, such as a cellular phone C. programming an interface to external voice-processing applications D. moving back from a cellular phone to a desktop phone E. receiving an outside call on a desktop phone or a cellular phone Correct Answer: AC /Reference: QUESTION 92 When a wireless controller loses connectivity to a remote Cisco Aironet 1030 Lightweight Access Point in REAP mode, what will be the next step for that remote access point? A. lose its configuration B. disconnect all associated clients C. continue to provide local WLAN1 connectivity for shared key authentication only D. support no more than 10 wireless clients
E. provide local WLAN1 connectivity using local-site AAA authentication server Correct Answer: C /Reference: QUESTION 93 A customer brings you a previously completed site survey for the initial wireless implementation from 12 months ago. The customer currently has six access points deployed in the warehouse. The survey shows that the installed coverage provides for a 15-percent overlap between cells at 5.5 Mbps, and a 5-percent overlap at 11 Mbps. This solution has proved to provide adequate coverage and roaming capabilities for the data applications.why would this site survey not be adequate for a VoIP application? A. inadequate QoS B. inadequate overlap C. inadequate data rate D. inadequate throughput /Reference: QUESTION 94 Before a Cisco Unified Wireless IP Phone 7920 can place a call, it will compare the QBSS in the beacon from the access point with the QBSS threshold on the phone. What action will the Unified Wireless IP Phone 7920 take if the QBSS threshold in the beacon is exceeded? A. place the call B. prompt network busy C. prompt number busy D. disconnect from access point /Reference: QUESTION 95 A customer has a small remote site with 10 standalone access points. In which two of the following scenarios would it be appropriate to implement CiscoWorks WLSE Express? (Choose two.) A. EAP-Cisco Wireless (Cisco LEAP) security is required and an external AAA server is available. B. EAP-Cisco Wireless (Cisco LEAP) security is required and no external AAA server is available. C. EAP-FAST security is required and no external AAA server is available. D. EAP-FAST security is required and an AAA server is available. E. MAC authentication is required and no external AAA server is available. F. MAC authentication is required and an external AAA server is available.
C /Reference: http://www.gratisexam.com/