pec-00712 Wall-Mount Cabinets ROTEK ingle-door and Double-Hinged Cabinets ROTEK ingle-door, UL and NEMA Type 4, 12 INDUTRY TANDARD UL 508A Listed; ile Number E61997 cul Listed per CA C22.2 No. 94; ile Number E61997 olid Door: Type 4 and 12 Window Door: Type 12 olid Door, tainless teel: Type 4, 4X and 12 NEMA / EEMAC: Type 4, 4X or 12 IEC 60529, I66 or I55, IK 10 ALICATION ROTEK ingle-door cabinets are an excellent, off-the-shelf choice for mounting 19-in. rack, panel-mounted devices or other electronic equipment. The cabinets are designed to provide both front and rear access to 19-in. rack-mounted equipment, while also ensuring protection against water, dirt, corrosive agents and other contaminants. ROTEK is an excellent choice for applications where space is at a premium and the only option is wall mounting. ROTEK comes in a broad range of sizes, materials and configurations to meet many demanding applications. ECIICATION Doors and body made of 14 gauge steel tainless steel enclosures made from Type 304 stainless steel Window made of.25-in. thick, scratch- and impact-resistant safety glass Rack angles made of plated 12 gauge steel M6 ground studs on the door and body are masked from paint Twenty 10-32 screws included with cabinet oam-in-place gasket made of durable polyurethane INIH retreated steel coated with RAL 7035 light-gray, low-gloss, lightly textured polyester powder paint tainless steel is provided with a smooth-grain finish LOAD RATING Height Maximum Load Rating 24 in. 0 lb./90.7 kg 36 in. 300 lb./136.1 kg 48 in. 400 lb./181.4 kg EATURE ACCEORIE olid-door cabinet provides complete physical and visual protection Locks and handles Window door, made of scratch-resistant safety glass, provides anels (steel and wood) visual monitoring of internal equipment while maintaining Grounding kits equipment protection ower Distribution Units (DUs) All seams are fully welded and ground smooth Rack angles Doors are provided with ground studs to facilitate proper bonding Bulletin: DW12 and grounding of the cabinet remium seamless, foam-in-place gasket prevents contaminants from entering the cabinet Keylocking wing knob is included on painted steel offering, providing access control to the cabinet; two keys are included with each cabinet tainless steel cabinet is provided with a quarter-turn slotted latch One set of plated, self-grounding, tapped 10-32 rack angles per EIA universal spacing standards, which can be adjusted frontto-back, is provided with each center section of the cabinet; additional tapped- or square-hole rack angles can be added to the cabinet to provide additional mounting Wall section welded panel studs which accommodate standard panels (steel and wood available), can be ordered separately Technical Operating Information AC Unit (T150116G100) Replacement ilter No. 10100091 Hz Voltage VAC hase BTU/Hr @ Max. Ambient Temp. (watts) ull Load Amp Max. Ambient Temp. (º) Max. Ambient Temp. (ºC) Cord and lug 60 (50) 115 1 800 (325 watts) 3.6 (3.8) 131 (125) 52 (52) 25-in. cord length 5-15 plug 1 Networking pec-00712 I UBJECT TO CHANGE WITHOUT NOTICE nvent.com/homan
Wall-Mount Cabinets ROTEK ingle-door and Double-Hinged Cabinets tandard roduct olid Door, NEMA Type 4, 12 Catalog Number Rack Units TR412G4 24.09 x 23.62 x 11.81 12 9.51 612 x 600 x 300 TR424G4 24.09 x 23.62 x 24.02 12 21.72 TR362412G4 36.30 x 23.62 x 11.81 19 9.51 922 x 600 x 300 TR364G4 36.30 x 23.62 x 24.02 19 21.72 TR482412G4 48.54 x 23.62 x 11.81 26 9.51 1233 x 600 x 300 TR484G4 48.54 x 23.62 x 24.02 26 21.72 1233 x 600 x 610 Optional teel anel Optional Wood anel Additional Rack Angles a 1.11 C CW TRA24T or TRA24 1.11 C CW TRA24T or TRA24 1.11 C32 C32W TRA36T or TRA36 1.11 C32 C32W TRA36T or TRA36 1.11 C44 C44W TRA48T or TRA48 1.11 C44 C44W TRA48T or TRA48 a T = tapped 10-32, = square hole (.375 in. x.375 in.) tandard roduct Window Door, NEMA Type 12 Catalog Number AxBxC Rack Units TRW412G2 24.09 x 23.62 x 11.81 12 9.51 612 x 600 x 300 TRW424G2 24.09 x 23.62 x 24.02 12 21.72 TRW362412G2 36.30 x 23.62 x 11.81 19 9.51 922 x 600 x 300 TRW364G2 36.30 x 23.62 x 24.02 19 21.72 TRW482412G2 48.54 x 23.62 x 11.81 26 9.51 1233 x 600 x 300 TRW484G2 48.54 x 23.62 x 24.02 26 21.72 1233 x 600 x 610 18.25 464 18.25 464 30.75 781 30.75 781 42.70 1085 42.70 1085 Optional teel anel Optional Wood anel Additional Rack Angles a 1.11 C CW TRA24T or TRA24 1.11 C CW TRA24T or TRA24 1.11 C32 C32W TRA36T or TRA36 1.11 C32 C32W TRA36T or TRA36 1.11 C44 C44W TRA48T or TRA48 1.11 C44 C44W TRA48T or TRA48 a T = tapped 10-32, = square hole (.375 in. x.375 in.) tandard roduct olid tainless teel Door, NEMA Type 4, 4X, 12 Catalog Number AxBxC Rack Units TR412X 24.09 x 23.62 x 11.81 12 9.51 612 x 600 x 300 TR424X 24.09 x 23.62 x 24.02 12 21.72 Optional teel anel Optional Wood anel Additional Rack Angles a C CW TRA24T or TRA24 C CW TRA24T or TRA24 nvent.com/homan H 763.422.2211 pec-00712 I Networking 2
Wall-Mount Cabinets ROTEK ingle-door and Double-Hinged Cabinets Catalog Number AxBxC Rack Units TR362412X 36.30 x 23.62 x 11.81 19 9.51 922 x 600 x 300 TR364X 36.30 x 23.62 x 24.02 19 21.72 TR482412X 48.62 x 23.62 x 11.81 26 9.51 1235 x 600 x 300 TR484X 48.62 x 23.62 x 24.02 26 21.72 1235 x 600 x 610 Optional teel anel Optional Wood anel Additional Rack Angles a C32 C32W TRA36T or TRA36 C32 C32W TRA36T or TRA36 C44 C44W TRA48T or TRA48 C44 C44W TRA48T or TRA48 a T = tapped 10-32, = square hole (.375 in. x.375 in.) tandard roduct olid Door AC, NEMA Type 4, 12 Catalog Number AxBxC Rack Units TR424G4A 24.09 x 23.62 x 24.02 12 21.72 TR364G4A 36.30 x 23.62 x 24.02 19 21.72 TR484G4A 48.62 x 23.62 x 24.02 26 21.72 1235 x 600 x 610 a T = tapped 10-32, = square hole (.375 in. x.375 in.) T150116G100 Air Conditioner included: 115V, 50/60 Hz, 800 BTU. Optional teel anel Optional Wood anel Additional Rack Angles a 1.11 C CW TRA24T or TRA24 1.11 C32 C32W TRA36T or TRA36 1.11 C44 C44W TRA48T or TRA48 tandard roduct Window Door AC, NEMA Type 12 Catalog Number AxBxC Rack Units TRW424G2A 24.09 x 23.62 x 2.40 12 21.72 18.25 612 x 600 x 61 464 TRW364G2A 36.30 x 23.62 x 24.02 19 21.72 30.75 781 TRW484G2A 48.54 x 23.62 x 24.02 26 21.72 42.70 1233 x 600 x 610 1085 a T = tapped 10-32, = square hole (.375 in. x.375 in.) T150116G100 Air Conditioner included: 115V, 50/60 Hz, 800 BTU. Optional teel anel Optional Wood anel Additional Rack Angles a 1.11 C CW TRA24T or TRA24 1.11 C32 C32W TRA36T or TRA36 1.11 C44 C44W TRA48T or TRA48 3 Networking pec-00712 I UBJECT TO CHANGE WITHOUT NOTICE nvent.com/homan
Wall-Mount Cabinets ROTEK ingle-door and Double-Hinged Cabinets tandard roduct olid Door tainless teel AC, NEMA Type 4,4X, 12 Catalog Number AxBxC Rack Units Optional teel anel Optional Wood anel Additional Rack Angles a TR424XA 24.09 x 23.62 x 24.02 12 21.32 C CW TRA24T or TRA24 541 TR364XA 36.30 x 23.62 x 24.02 19 21.32 C32 C32W TRA36T or TRA36 541 TR484XA 48.62 x 23.62 x 24.02 1235 x 600 x 610 26 21.32 541 C44 C44W TRA48T or TRA48 a T = tapped 10-32, = square hole (.375 in. x.375 in.) nvent.com/homan H 763.422.2211 pec-00712 I Networking 4
Wall-Mount Cabinets ROTEK ingle-door and Double-Hinged Cabinets Cooling erformance for Air Conditioner ackages ROTEK Air Conditioner calculated cooling performance AC erformance: 800 BTU/hour or 235 watts Voltage / Hertz: 115 VAC/60 Hz Max. Ambient Temperature: 131 Min. Ambient Temperature: -40 Max. Internal Temperature: 100 (Allowable) Cooling erformance ROTEK Air Conditioner ackages Ambient Temperature ( ) Watts (Heat) Dissipated Cabinet Height: 24 in. Watts (Heat) Dissipated Cabinet Height: 36 in. Watts (Heat) Dissipated Cabinet Height: 48 in. 130 15 N/A N/A 1 88 73 59 110 161 154 146 100 234 234 234 90 308 315 322 80 381 396 410 70 454 476 498 60 527 557 586 50 601 637 674 40 674 718 762 N/A = Not applicable and not recommended in these applications 1 BTU = 3.413 watts 5 Networking pec-00712 I UBJECT TO CHANGE WITHOUT NOTICE nvent.com/homan
Wall-Mount Cabinets ROTEK Accessories ROTEK Wall-Mount Cabinet Accessory anels Where equipment mounting space is limited, Accessory anels increase cabinet capacity by providing a mounting surface for 19-in. equipment and accessories at the back of the cabinet. The panels mount on collar studs provided in the cabinet. Available in painted mild steel. Bulletin: CW, DWDH2 tandard roduct Catalog Number anel ize D x E mm/in. Gauge C14 462 x 310 14 C 462 x 462 12 C2442 564 x 1021 12 C32 762 x 462 12 C44 1072 x 462 12 C56 1351 x 462 12 ROTEK Rack Angles quare- and tapped-hole rack angles fit into ROTEK single-and double-hinged cabinets. Bulletin: DWDH2 tandard roduct L Catalog Number TRA16T 16.12 409 TRA16 16.12 409 TRA24T 23.12 587 TRA24 23.12 587 TRA36T 35.32 897 TRA36 35.32 897 TRA48T 45.57 1157 TRA48 45.57 1157 TRA60T 59.07 1500 TRA60 59.07 1500 Hole Type its Cabinet Height Rack Units Tapped 16.00 8 quare 16.00 8 Tapped 24.00 12 quare 24.00 12 Tapped 36.00 19 quare 36.00 19 Tapped 48.00 26 quare 48.00 26 Tapped 60.00 32 quare 60.00 32 nvent.com/homan H 763.422.2211 pec-00712 I Networking 6