ertadrive LED driver Datasheet ertadrive Affordable and reliable LED Drivers Affordable LED Driver range offering Philips reliability. The ertadrive range is compatible with O and mid-power LEDs from any LED manufacturer. enefits Features Application Driver design based on Philips High reliability Public buildings (airports, experience and knowledge of conventional fluorescent and HID technologies Various power wattage Drivers that are related to the lumen packages/applications Fixed output Drivers Independent-version housing design for stand-alone installations Luminaire design flexibility to keep stable/constant cinemas, theaters, exhibition halls) Lumen output and light quality levels Retail (supermarkets, shops) Fast Time to Market Office One supplier for professional general lighting LED Drivers Affordable LED Drivers
Electrical input data minal input voltage 220...240 Vac performance range minal input frequency 50...60 Hz minal input current 0.22 A Input voltage 230 Vac minal input power 47 W Power factor 0.9 Total harmonic distortion 20 @ full load. See graph. Efficiency 85 @230V @ full load Input voltage A 202...254 Vac Operational range Input frequency A 47.5...63 Hz Maximum permissible range Regulation method onstant urrent Output voltage 32...42 Vdc Output voltage max. 75 V Peak voltage at open load Output current 0.945...1.155 A Full output current setting Output current tolerance ± 10 Output current ripple LF 30 Ripple = peak / average Output power 33...40 W Full output ontrol method Fixed @230V @ full load @230V @ full load @ full load. See graph. Electrical output data Electrical data controls input Logistical data Product name Order code Logistic code 12N 9290 009 31906 EAN3 Pieces per box 2/7 32
Wiring & onnections Input wire cross-section 0.2...1.5 2 WAGO250 (3.5 ), solid wire 16...24 AWG WAGO250 (3.5 ), solid wire Input wire strip length 8.5...9.5 Output wire cross-section 0.2...1.5 2 WAGO250 (3.5 ), solid wire 16...24 AWG WAGO250 (3.5 ), solid wire Output wire strip length 8.5...9.5 Maximum cable length 600 Total length of wiring including LED module, one way Dimensions and weight Length (A1) 105 Width (1) 68 Height (1) 32 Fixing hole diameter (D1) 3.6 Fixing hole distance (A2) 87 Weight 129 gram 3/7
Operational temperatures and humidity Ambient temperature +0...+45 º Tcase-max 75 º Maximum temperature measured at Tc-point Tcase-life 65 º Measured at Tc-point Maximum housing temperature 130 º In case of a failure Relative humidity 10...90 n-condensing Storage temperature and humidity Ambient temperature -25...+85 º Relative humidity 5...95 n-condensing Driver lifetime 30,000 hours Measured temperature at Tc-point is Tcase-life. Lifetime Maximum failures = 10 Prograable features Remark Set output current (AO) See Design-in guide. Default output current: 1050 ma LED module temperature derating (MTP) onstant Lumen Over Lifetime (LO) D emergency diing (DemDIM) orridor mode Energy metering Diagnostics Remark Features Open load protection Yes Automatic recovering Short circuit protection Yes Automatic recovering Over power protection Hot wiring Suitable for fixtures with II per IE60598 protection class ertificates and standards Approval marks Ingress Protection classification 20 4/7
Inrush current Inrush current Ipeak 16 A Input voltage 230V Inrush current Twidth 240 µs Input voltage 230V, measured at 50 Ipeak Drivers / M 16A type 35 pcs M Rating Relative number of LED drivers 10A 63 13A 81 16A 100 (stated in datasheet) 20A 125 25A 156 10A 104 13A 135 16A 170 20A 208 25A 260 Driver touch current Typical touch current 0.7 ma peak Acc. IE61347-1. LED module contribution not included Surge iunity Mains surge iunity (diff. mode) 1 kv Acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. 2 kv Acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us mode) 5/7
Graphs Operating window Power factor versus output power Efficiency versus output power 6/7
2015 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Data subject to change. Date of release: July 8, 2015 www.philips.com/technology