INSTRUCTION MANUAL HD-TVI Camera HTINT70T, HTINT701T (Bullet Camera) HTINT601T (Turret Camera) HTINT591T (Dome Camera) HT7246T (Dome Camera)
Contents Contents... 1 Precautions... 2, 3 Safety Instructions... 4 Package Contents... 5 Camera Installation... 6-12 Lens Adjustment... 13... 13-17 Camera Dimension... 18-19 Features... 20 OSD Menu Details... 21-36 Trouble Shooting... 37 1
Precautions Do not install the camera in extreme temperature conditions. Do not install the camera under unstable lighting conditions. Do not touch the front lens of the camera. Only use the camera under conditions where temperatures are between -10 C and +50 C. Be especially careful to provide ventilation when operating under high temperatures. Severe lighting change or flicker can cause the camera to work improperly. This is one of the most important parts of the camera. Be careful not to leave fingerprints on the lens cover. Never keep the camera pointed directly at strong light. Do not drop the camera or subject it to physical shocks. Do not expose the camera to radioactivity. It can cause malfunctions to occur. Housing damage can compromise weatherproof ratings. If exposed to radioactivity the CCD will fail. NOTE * If the camera is exposed to spotlight or object reflecting strong light, smear or blooming may occur. * please check that the power satisfies the normal specification before connecting the camera. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ISO14001 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. In USA and Canada, Use Class 2 Power Supply Only INFORMATION - This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense. WARNING - Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment. WARNING - To prevent electric shock and risk of fire hazards: Do NOT use power sources other than that specified. Do NOT expose this appliance to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION : To prevent electric shock and risk of fire hazards: Do NOT use power sources other than those specified. 3
Safety Instructions There are no user serviceable parts inside Do not disassemble this camera other than to make initial adjustments Use a UL approved regulated 24 volt AC or 12 volt DC power supply Please insure that your installation area can support the weight of the camera Do not use a strong or abrasive detergent when cleaning the camera Do not install near cooling or heating device 4
Package Contents Please make sure that the following items are included in the Package: 1) HTINT70T, HTINT701T 2) HTINT601T 3) HTINT591T 4) HT7246T 5
CAMERA INSTALLATION 6
CAMERA INSTALLATION Compatibility 1) HTINT70T, HTINT701T CVCJBB INTJBS INTCM 2) HTINT601T CVCJBD Adaptor plate(60plate) with rubber 7
CAMERA INSTALLATION Compatibility 3) HTINT591T CVCJBD Adaptor plate(59plate) with rubber 4) HT7246T INTWM INTPM CVCJBD DFM 8
The installation instructions in this manual than that contained in the operating instructions unless you are qualified to do so. CAMERA INSTALLATION 1. HTINT70T, HTINT701T WALL SCREW TS T1, 4X25, TH, SUS, 4EA 3AXIS BRACKET SCREW M5X10, HEXAGON SOCKET, SUS, BK, 4EA 9
CAMERA INSTALLATION 2. HTINT601T BALL DOME BASE SCREW TS T1, 4X25, TH, SUS, 3EA BALL DOME BALL DOME BODY 10
CAMERA INSTALLATION 3. HTINT591T VANDAL DOME BASE SCREW TS T1, 3.5X20, PH, SUS, 3EA VANDAL DOME BODY BODY OUTER COVER SPECO 11
CAMERA INSTALLATION 4. HT7246T PLASTIC ANCHOR 6x30, 3EA VANDAL DOME BASE ASSEMBLY TAPPING SCREW 4X40, 3EA VANDAL DOME BODY ASSEMBLY BODY OUTER COVER 12
LENS ADJUSTMENT 1. HTINT70T Open the cap Focus adjustment Lock screw Zoom adjustment 13
Intensifier T Series SPECIFICATIONS HTINT70T / HTINT701T Image Sensor Effective Pixels Total pixels Scanning System S/N Ratio Resolution Video Output Minimum Illumination LENS Shutter Speed OSD BLC HSBLC WDR(Wide Dynamic Range) ACE Day&Night Smart-IR White Balance Sense-Up Motion Digital Noise Reduction De-Fog Brightness AGC Privacy Mirror Sharpness Defect Lens Shading(LSC) RS-485 COLORBAR CVBS OUTPUT Language Power Power Consumption Operating Temperature Storage Temperature Dimension Weight 1/3" SONY 2Mega Exmor CMOS Sensor Imx222 1984(H) X 1105(V), 2.19M Pixels 2000(H) X 1121(V), 2.24M Pixels Progressive Scan More than 50dB Digital : 1920X1080(1080p@30f / 1080p@25f))" 1280X720(720p@60f / 720p@50f) 1.0Vp-p Composite. 75 Ohms 1.0Vp-p TVI(Transport Video Interface) 75 Ohms 0.001 Lux(Sens-Up X32) DC Auto Iris Varifocal Lens(2.8mm-12mm) 3.6mm Fixed Board Lens AUTO / Manual(1/30,1/25Sec ~ 1/30000Sec) / FLICKER Built-in O O ON / (Low,Middle,High) /LOW/MIDDLE/HIGH AUTO/COLOR/NIGHTEXTERN0 0~20 AUTO/AWB/AWC-SET/MANUAL x2 ~ x32 ON / (4 Area) 3DNR (/LOW/MIDDLE/HIGH) ON(AUTO/MANUAL) / 0 ~ 20, Default : 10 0~20(Level Adjustable), Default : 20 ON / (16 Area) MIRROR,V-FLIP 0~20 AUTO DETECT O O(OPTION) ON/ NTSC/PAL Selectable English DC 12V/AC 24V Dual Voltage Operation DC 12V : Heater ON-500mA, Heater -300mA AC 24V : Heater ON-195mA, Heater -130mA -4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH) -4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH) 3.94"(W)*3.94"(H)*8.27"(D) 3.09Ibs 14
Intensifier T Series SPECIFICATIONS HTINT601T Image Sensor Effective Pixels Total pixels Scanning System S/N Ratio Resolution Video Output Minimum Illumination LENS Shutter Speed OSD BLC HSBLC WDR(Wide Dynamic Range) ACE Day&Night Smart-IR White Balance Sense-Up Motion Digital Noise Reduction De-Fog Brightness AGC Privacy Mirror Sharpness Defect Lens Shading(LSC) RS-485 COLORBAR CVBS OUTPUT Language Power Power Consumption Operating Temperature Storage Temperature Dimension Weight 1/3" SONY 2Mega Exmor CMOS Sensor Imx222 1984(H) X 1105(V), 2.19M Pixels 2000(H) X 1121(V), 2.24M Pixels Progressive Scan More than 50dB Digital : 1920X1080(1080p@30f / 1080p@25f))" 1280X720(720p@60f / 720p@50f) 1.0Vp-p Composite. 75 Ohms 1.0Vp-p TVI(Transport Video Interface) 75 Ohms 0.001 Lux(Sens-Up X32) 3.6mm Fixed Board Lens AUTO / Manual(1/30,1/25Sec ~ 1/30000Sec) / FLICKER Built-in O O ON / (Low,Middle,High) /LOW/MIDDLE/HIGH AUTO/COLOR/NIGHTEXTERN0 0~20 AUTO/AWB/AWC-SET/MANUAL x2 ~ x32 ON / (4 Area) 3DNR (/LOW/MIDDLE/HIGH) ON(AUTO/MANUAL) / 0 ~ 20, Default : 10 0~20(Level Adjustable), Default : 20 ON / (16 Area) MIRROR,V-FLIP 0~20 AUTO DETECT O O(OPTION) ON/ NTSC/PAL Selectable English DC 12V/AC 24V Dual Voltage Operation DC 12V : Heater ON-500mA, Heater -300mA AC 24V : Heater ON-195mA, Heater -130mA -4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH) -4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH) 4.65"(Dia)*3.80(H) 1.99Ibs 15
Intensifier T Series SPECIFICATIONS HTINT591T Image Sensor Effective Pixels Total pixels Scanning System S/N Ratio Resolution Video Output Minimum Illumination LENS Shutter Speed OSD BLC HSBLC WDR(Wide Dynamic Range) ACE Day&Night Smart-IR White Balance Sense-Up Motion Digital Noise Reduction De-Fog Brightness AGC Privacy Mirror Sharpness Defect Lens Shading(LSC) RS-485 COLORBAR CVBS OUTPUT Language Power Power Consumption Operating Temperature Storage Temperature Dimension Weight 1/3" SONY 2Mega Exmor CMOS Sensor Imx222 1984(H) X 1105(V), 2.19M Pixels 2000(H) X 1121(V), 2.24M Pixels Progressive Scan More than 50dB Digital : 1920X1080(1080p@30f / 1080p@25f))" 1280X720(720p@60f / 720p@50f) 1.0Vp-p Composite. 75 Ohms 1.0Vp-p TVI(Transport Video Interface) 75 Ohms 0.001 Lux(Sens-Up X32) 3.6mm Fixed Board Lens AUTO / Manual(1/30,1/25Sec ~ 1/30000Sec) / FLICKER Built-in O O ON / (Low,Middle,High) /LOW/MIDDLE/HIGH AUTO/COLOR/NIGHTEXTERN0 0~20 AUTO/AWB/AWC-SET/MANUAL x2 ~ x32 ON / (4 Area) 3DNR (/LOW/MIDDLE/HIGH) ON(AUTO/MANUAL) / 0 ~ 20, Default : 10 0~20(Level Adjustable), Default : 20 ON / (16 Area) MIRROR,V-FLIP 0~20 AUTO DETECT O O(OPTION) ON/ NTSC/PAL Selectable English DC 12V/AC 24V Dual Voltage Operation DC 12V : Heater ON-500mA, Heater -300mA AC 24V : Heater ON-195mA, Heater -130mA -4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH) -4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH) 4.72"(Dia)*3.35"(H) 2.20 Ibs 16
Intensifier T Series SPECIFICATIONS HT7246T Image Sensor Effective Pixels Total pixels Scanning System S/N Ratio Resolution Video Output Minimum Illumination LENS Shutter Speed OSD BLC HSBLC WDR(Wide Dynamic Range) ACE Day&Night Smart-IR White Balance Sense-Up Motion Digital Noise Reduction De-Fog Brightness AGC Privacy Mirror Sharpness Defect Lens Shading(LSC) RS-485 COLORBAR CVBS OUTPUT Language Power Power Consumption Operating Temperature Storage Temperature Dimension Weight 1/3" SONY 2Mega Exmor CMOS Sensor Imx222 1984(H) X 1105(V), 2.19M Pixels 2000(H) X 1121(V), 2.24M Pixels Progressive Scan More than 50dB Digital : 1920X1080(1080p@30f / 1080p@25f))" 1280X720(720p@60f / 720p@50f) 1.0Vp-p Composite. 75 Ohms 1.0Vp-p TVI(Transport Video Interface) 75 Ohms 0.001 Lux(Sens-Up X32) DC Auto Iris Varifocal Lens 2.8-12mm AUTO / Manual(1/30,1/25Sec ~ 1/30000Sec) / FLICKER Built-in O O ON / (Low,Middle,High) /LOW/MIDDLE/HIGH AUTO/COLOR/NIGHTEXTERN0 0~20 AUTO/AWB/AWC-SET/MANUAL x2 ~ x32 ON / (4 Area) 3DNR (/LOW/MIDDLE/HIGH) ON(AUTO/MANUAL) / 0 ~ 20, Default : 10 0~20(Level Adjustable), Default : 20 ON / (16 Area) MIRROR,V-FLIP 0~20 AUTO DETECT O O(OPTION) ON/ NTSC/PAL Selectable English DC 12V/AC 24V Dual Voltage Operation DC 12V : Heater ON-500mA, Heater -300mA AC 24V : Heater ON-195mA, Heater -130mA -4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH) -4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH) 5.10"(Dia)*3.46"(H) 1.0 Ibs 17
CAMERA DIMENSION 1) HTINT70T, HTINT701T 3.94 dia 3.38 4.80 8.27 3.01 3.46 2.95 2) HTINT601T 3.80 2.66 3.01 4.65 dia 18
CAMERA DIMENSION 3) HTINT591T 3.23 dia 1.82 4.72 dia 3.35 4) HT7246T 5.10 dia 5.10 dia 3.46 1.16 3.93 dia 19
3D-DNR are appearing on the scene. clear images. Defog Defog or snow. 20
21
22
SPECO TECH 1. PRESET 2.MAIN SETUP 3.EXIT INDOOR 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.SYSTEM MENU DCAUTO AUTO MIDDLE AUTO 23
NOTE 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.SYSTEM MENU DCAUTO AUTO MIDDLE AUTO 24
NOTE MODE MODE INDOOR 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.SYSTEM MENU DC AUTO MIDDLE AUTO 2.EXPOSURE BRIGHTNESS SHUTTER INTENSIFY AGC IIIIIIIII IIIIIIII 10 AUTO X16 IIIIIIIIIIIIIIIIII 20 25
NOTE condition. 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.SYSTEM MENU DC AUTO MIDDEL AUTO 26
should be needed. MANUAL KELVIN R-GAIN B-GAIN MIDDLE IIIIIIIII IIIIIIIII 10 IIIIIIIII IIIIIIIII 10 NOTE change, 27
1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.SYSTEM MENU DC AUTO MIDDLE AUTO where you can make finer adjustments. HLC LEVEL MODE IIIIIII IIIIIII 10 ALL DAY 28
a submenu appears where you can make finer adjustments. BLC H-POS V-POS H-SIZE V-SIZE 6 4 5 3 WDR WEIGHT MIDDLE 29
1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.SYSTEM MENU DC AUTO MIDDLE AUTO 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.SYSTEM MENU DC AUTO MIDDLE AUTO 30
low light condition. It can adjust the delay time, starting brightness and end brightness according to the 6.DAY&NIGHT SMART IR. AGC THRES AGC MARGIN DELAY IIIIIIIIIIIIII 0 IIIIIII IIIIII 10 IIIIIII IIIIII 10 LOW 6.DAY&NIGHT SMART IR IIIIIIIIIIIIIII 0 6.DAY&NIGHT SMART IR EXTERN S/W DELAY IIIIIIIIIIIIIII 0 LOW LOW 31
1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.SYSTEM MENU DC AUTO MIDDLE AUTO Here you can optimise the image quality by adjusting different options. SHARPNESS GAMMA COLOR GAIN MIRROR FLIP D-ZOOM ACE DEFOG SHADING PRIVACY 7.IMAGE IIIIIII IIIIII 10 0.55 IIIIIII IIIIII 10 1.0X LOW 32
magnification is, the lower the resolution is. angle. This function will reduce the brightness difference between the centre and the edges. If you select out of this menu. ZONE NUM ZONE DISP H-POS V-POS H-SIZE V-SIZE Y LEVEL CR LEVEL CB LEVEL PRIVACY 0 12 2 3 3 IIIIIII IIIIII 10 IIIIIII IIIIII 10 IIIIIII IIIIII 10 mask. 33
1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.SYSTEM MENU DC AUTO MIDDLE AUTO SENSITIVITY WINDOW TONE WINDOW USE WINDOW ZONE DET H-POS DET V-POS DET H-SIZE DET V-SIZE ALARM 8.MOTION IIIIIIIIIIIIII 0 0 0 1 1 28 15 34
This can be used when you want to select the additional function control. 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SPECO DNR 6.DAY&NIGHT 7.IMAGE 8.MOTION 9.SYSTEM MENU DC AUTO MIDDLE AUTO COM. IMAGE RANGE OUTPUT MODE COLOR SPACE FRAME RATE CVBS LANGUAGE COLORBAR RESET 9.SYSTEM USER 1080P HD-Cbcr 30 FPS NTSC ENG ON 35
36
Trouble Shooting PROBLEM Northing appears on the screen. The image on the screen is dim. The image on the screen is dark. The camera is not working properly and the surface of the camera is hot. Motion Detection is not activated. The color of the picture is not correct. The image on the The INTENSIFY does not work. POSSIBLE CAUSE Check the power cable, power supply output and video connection between the camera and monitor. Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth. Adjust the monitor controls, as required. If the camera is facing a very strong light, change the camera position. Adjust the lens focus. Adjust the contrast control of the monitor. Check the camera is correctly connected to an appropriate regulated power source. Has MOTION DET been set to ON in the menu? Check the settings in WHITE BALANCE menu. Make sure that the camera isn t facing direct sunlight or Check that the AGC setting in the EXPOSURE menu is not set to. Check the EXPOSURE menu and make sure SHUTTER is set to------. 37
38
MEMO 39
MEMO 40
MEMO 41
MEMO 42
200 New Highway Amityville, NY 11701 631-957-8700 1 800 645 5516 www.specotech.com