Level 2 Networking, telephony and VoIP for the digital home technology integrator ( )

Similar documents
Level 3 Install, configure and integrate networked hardware and software ( )

Level 2 Install, configure and test ICT networks (7266/ / )

Level 2 Digital Home Technology Integrator ( )

Level 3 ICT systems and network management ( )

Level 2 Install and configure ICT equipment and operating systems ( )

Level 2 Audio/video installation for the digital home technology integrator ( )

Level 2 Control and security systems for the digital home technology integrator ( )

Level 2 Install and Configure Equipment and Operating Systems ( )

Level 3 Web fundamentals ( )

Level 1 Dismantle, assemble, install and maintain a desktop computing system (7266/7267/ )

Level 3 Designing and creating advanced websites ( )

Level 2 Creating a procedural program using COBOL ( )

Level 2 Security for IT Users ( )

Level 3 Network management and security ( )

Level 3 Voice and data communications ( )

Level 3 Network management and security ( )

Level 2 Select and use IT 2 ( )

Level 1 Dismantle, assemble, install and maintain a desktop computing system (7266/7267/ )

Level 2 Networking Principles ( )

Level 2 Creating an event driven computer program using Java ( )

Level 2 Networking Principles ( )

Level 3 Website software ( )

Level 3 Voice and data communications ( )

Level 3 Develop software using Java (7266/ )

Level 2 Install, configure and test ICT networks ( )

Level 2 Security for IT users (ITS ) ITQ (QCF) Assignment guide for Candidates Assignment A. March 2010 Version 1.

Level 3 Creating an object oriented computer program using Java ( / )

Level 2 FS IT user fundamentals (IUFFS )

Level 2 Create software components using Java (7266/ )

Level 3 Install, configure and integrate networked hardware and software ( )

Level 2 Set up an IT system (SIS )

Level 2 Creating an event driven computer program using Java ( )

Level 3 Software design fundamentals ( / )

Level 3 Install, configure and upgrade ICT software ( / )

Level 1 Multimedia Software (MM )

Level 3 Principles of ICT Systems and Data Security ( / )

Level 3 Design and maintain ICT networks software components ( )

Level 3 Implementing an ICT systems security policy ( / )

Level 1 IT user fundamentals (IUF:FS )

Level 2 Designing and creating multimedia presentations (7266/ )

Unit Syllabus Level 2 Networking, telephony and VoIP for the digital home technology integrator

Level 1Using mobile IT devices (UMD )

Level 1 IT user fundamentals (IUF:FS )

Level 1 Using the Internet for finding and sending information (7266/ )

Level 3 Develop software using Visual Basic.NET (7266/ )

January 2010 Version 9.0

Level 3 Creating an event driven computer program using Visual Basic.NET ( / )

Level 3 Creating an event driven computer program using Visual Basic ( / )

Level 1 Using the Internet for finding and sending information (7266/ )

Level 1 Creating simple web pages (7266/ )

Level 1 Internet Safety for IT Users ( )

Level 3 Develop software using C# (7266/ )

Level 3 Design software ( )

Level 3 Design and maintain ICT network software components ( )

Level 2 Designing and creating databases (7266/ )

Level 3 Design Software ( )

Level 3 Using the Internet (INT )

Systems and Principles Unit Syllabus

Level 2 Creating an event driven computer program using Visual Basic.NET ( )

Level 1 Design software (DIS )

Level 3 Multimedia software (MM )

Level 1 Design software (DIS )

Level 1 Producing simple databases (7266/ )

Level 2 Creating an event driven computer program using VisualBasic.Net ( )

Level 2 Create software components using Visual Basic.NET ( )

Level 1 Internet Safety for IT Users ( )

Level 1 Desktop publishing software (DTP )

Level 3 Desktop publishing software (DTP )

Level 2 Data management software (DMS )

Level 1 Working with desktop publishing applications (7266/ )

Level 2 Creating an event driven computer program using Visual Basic ( )

Level 2 IT software fundamentals (ISF:FS )

Level 3 Word processing software ( )

Level 3 Database software ( )

Level 2 Creating an event driven computer program using C# ( )

Level 3 Multimedia Software (MM )

Level 3 Data management software (DMS )

Level 3 Database Software ( )

Level 3 Using collaborative technologies (UCT )

Level 3 Using (EML )

Level 2 Designing and creating multi-page websites (7266/ )

Level 3 Word processing software (WP )

Level 2 Website software (WS )

Level 2 Designing and creating documents using desktop publishing software (7266/ ) e-quals Assignment guide for Candidates Assignment C

Level 2 Creating an event driven computer program using C# ( )

Systems and Principles Unit Syllabus

Level 2 Create Software Components Using C# (7266/ )

Level 1 Creating simple presentations (7266/ )

Systems and Principles Unit Syllabus

Systems and Principles Unit Syllabus

Level 2 Combining word processing, spreadsheet and database applications to present information (7266/ )

Level 2 Desktop publishing software (DTP )

Systems and Principles Unit Syllabus

Level 1 Producing simple word processed documents (7266/ )

Level 3 Integrating applications to create advanced presentations (7266/ )

Systems and Principles Unit Syllabus

Level 1 Creating presentations using word processing, spreadsheet and presentation software (7266/ )

Level 3 Designing and creating relational databases (7266/ ) e-quals

Level 2 Using word processing software to adapt and merge documents (7266/ )

Level 2 Designing and creating databases (7266/ )

Transcription:

Level 2 Networking, telephony and VoIP for the digital home technology integrator (7575-004) Assignment guide for Candidates Assignment A www.cityandguilds.com December 2012 Version 3.0

About City & Guilds City & Guilds is the UK s leading provider of vocational qualifications, offering over 500 awards across a wide range of industries, and progressing from entry level to the highest levels of professional achievement. With over 8500 centres in 100 countries, City & Guilds is recognised by employers worldwide for providing qualifications that offer proof of the skills they need to get the job done. City & Guilds Group The City & Guilds Group includes City & Guilds, ILM (the Institute of Leadership & Management) which provides management qualifications, learning materials and membership services, NPTC which offers land-based qualifications and membership services, and HAB (the Hospitality Awarding Body). City & Guilds also manages the Engineering Council Examinations on behalf of the Engineering Council. Equal opportunities City & Guilds fully supports the principle of equal opportunities and we are committed to satisfying this principle in all our activities and published material. A copy of our equal opportunities policy statement is available on the City & Guilds website. Copyright The content of this document is, unless otherwise indicated, The City and Guilds of London Institute 2009 and may not be copied, reproduced or distributed without prior written consent. However, approved City & Guilds centres and learners studying for City & Guilds qualifications may photocopy this document free of charge and/or include a locked PDF version of it on centre intranets on the following conditions: centre staff may copy the material only for the purpose of teaching learners working towards a City & Guilds qualification, or for internal administration purposes learners may copy the material only for their own use when working towards a City & Guilds qualification The Standard Copying Conditions on the City & Guilds website also apply. Please note: National Occupational Standards are not The City and Guilds of London Institute. Please check the conditions upon which they may be copied with the relevant Sector Skills Council. Publications City & Guilds publications are available on the City & Guilds website or from our Publications Sales department at the address below or by telephoning +44 (0)20 7294 2850 or faxing +44 (0)20 7294 3387. Every effort has been made to ensure that the information contained in this publication is true and correct at the time of going to press. However, City & Guilds products and services are subject to continuous development and improvement and the right is reserved to change products and services from time to time. City & Guilds cannot accept liability for loss or damage arising from the use of information in this publication. City & Guilds 1 Giltspur Street London EC1A 9DD T +44 (0)844 543 0000 (Centres) T +44 (0)844 543 0033 (Learners) F +44 (0)20 7294 2413 www.cityandguilds.com learnersupport@cityandguilds.com

Contents Unit 004 Level 2 Networking, telephony and VoIP for the digital home technology integrator Assignment A Introduction Information for Candidates 2 Level 2 DHTI Networking and VoIP (7575-004) 3 Candidate Instructions 3 Level 2 Assignment A Version 3.0 Networking, telephony and VoIP for the digital home technology integrator (7575-004) 1

Level 2 Networking, telephony and VoIP for the digital home technology integrator (7575-004) Assignment A Introduction Information for Candidates About this document This assignment comprises all of the assessment for Level 2 Networking, telephony and VoIP for the digital home technology integrator (7575-004) Health and safety You are asked to consider the importance of safe working practices at all times. You are responsible for maintaining the safety of others as well as your own. Anyone behaving in an unsafe fashion will be stopped and a suitable warning given. You will not be allowed to continue with an assignment if you compromise any of the Health and Safety requirements. This may seem rather strict but, apart from the potentially unpleasant consequences, you must acquire the habits required for the workplace. Time allowance The recommended time allowance for this assignment is four hours. 2 Level 2 Assignment A Version 3.0 Networking, telephony and VoIP for the digital home technology integrator (7575-004)

Level 2 Networking, telephony and VoIP for the digital home technology integrator (7575-004) Candidate Instructions Time allowance: 4 hours Assignment set up: This assignment is made up of four tasks Scenario Qinvoip is a company that specialises in integrating digital devices into homes. As part of the process it offers customers a free site visit to discuss their requirements. Following a site visit, your role is to prepare a plan detailing the layout of the connecting transmission media and the specifications of the digital devices that are to be installed. When the customer has agreed the design and specifications that have been recommended, you will install and troubleshoot the digital devices and associated transmission media. Read all of the instructions carefully and complete the tasks in the order given. The customer has two PCs and a laptop. One PC is connected to the internet via an ADSL Broadband connection. (See the attached figures for the locations of the PCs and ADSL modem). Note: The laptop has not been illustrated on the floor plans as it is a mobile device and could be anywhere in the home. During the discussion with the customer the following requirements were identified: The customer would like the two PCs and the laptop to be able to access the internet. The laptop must be able to access the network from anywhere in the house while the PCs are to remain in their current locations and must be physically connected. The customer wants all devices to have manually configured network settings and the wireless network should be hidden. Anti-virus and firewall software is to be installed onto the laptop. The customer would like a shared folder located on the laptop to be accessible from the PCs. The customer must be able use voice over internet protocol (VoIP) to make phone calls over the internet from all three computers. Level 2 Assignment A Version 3.0 Networking, telephony and VoIP for the digital home technology integrator (7575-004) 3

Task A 1 Using the Answer sheet and any technical specifications provided by the assessor, identify the following: Suitable devices that meet the customer requirements. Proposed locations of the devices that you have selected. List the sources used to find product specifications. Cable types and approximate lengths. Any software and device drivers required. IP addresses and subnet masks to be used by each device You are permitted to use any printed documentation provided by the assessor, e g manufacturers manuals for the devices. 2 Using the room diagram provided by the assessor, detail the following: the location of each device the proposed type and layout of transmission media used Assume an adequate power source is available wherever you choose to site the customer's equipment. 3 Please use the Answer Sheet provided to complete Task A3 List three common causes of interference on a wireless network that uses the 802.11g standard. 4 Please use the Answer Sheet provided to complete Task A4 Briefly explain the function of a subnet mask. 5 Please use the Answer Sheet provided to complete Task A5 Give three reasons why it is important to plan and document customer installations. Task B Your assessor will provide you with a save directory or removable storage media. 1 Using the details provided by the Assessor, install and configure a wireless network to the customer s requirements ensuring that broadcasting of the SSID is disabled. 2 Connect all of the customers devices to the network as required by the customer. You should create new network cables of the required length for your solution. 4 Level 2 Assignment A Version 3.0 Networking, telephony and VoIP for the digital home technology integrator (7575-004)

3 Produce screen shots showing the following: Your SSID setting. That broadcasting of the SSID is disabled. A manually configured IP address on each device. That you have configured security onto the wireless network. Save the screen shots as screenshots1. 4 Please use the Answer Sheet provided to complete Task B4 Briefly explain the function of NAT in a home network 5 Install anti-virus software on the laptop. Update the anti-virus software with the latest virus definitions. Produce a screenshot which shows the anti-virus software is installed and up-todate. Save it as screenshot2. 6 Please use the Answer Sheet provided to complete Task B6 Identify the current version of the VoIP software and go to the manufacturer s website to check if this is the most up-to-date version. 7 Install a software firewall on the laptop. Update the firewall software to the latest version. Produce a screenshot which shows the firewall software is installed and up-to-date. Save it as screenshot3. 8 Configure the default web browser on the laptop to: block website pop-ups disable all browser add-ons delete temporary internet files on shutdown. Produce a screenshot which shows the default web browser is configured to block website pop-ups, disable all browser add-ons and temporary internet files are deleted on shutdown. Save it as screenshot 4. 9 Please use the Answer Sheet provided to complete Task B9 Briefly explain the dangers of using a laptop when the following are present: malware spyware Trojan 10 Configure a shared folder on the laptop. 11 Test that the folder can be accessed across the network from the PCs. At this point demonstrate to the assessor that the PCs can access the laptop shared folder remotely Level 2 Assignment A Version 3.0 Networking, telephony and VoIP for the digital home technology integrator (7575-004) 5

Task C 1 Install the required hardware to allow the customer to communicate using VoIP on to each device. 2 Install and configure appropriate VoIP software on to each device. The assessor will provide you with VoIP account information. Once the software has been installed and configured, test that it is functioning correctly. At this point ask the assessor to verify that the VoIP communication is operational Task D A few months after the install the customer complains that there have been problems connecting one of the PCs to the internet. 1 Use appropriate command line or terminal troubleshooting utilities to identify the following information. Produce screen shots of the following results: Connectivity of the local network interface card using the loopback address. The IP address and subnet mask allocated to the computer. The IP address of the external DNS server. Save the screenshots as Screenshots5. 2 Test two patch leads using appropriate test equipment to identify any problems. Inform the assessor of any faults identified. When you have finished working: Sign each document above your name and label all removable storage media with your name. Hand all paperwork and removable storage media to your assessor. If the assignment is taken over more than one period, all paperwork and removable media must be returned to the test supervisor at the end of each sitting. End of assignment 6 Level 2 Assignment A Version 3.0 Networking, telephony and VoIP for the digital home technology integrator (7575-004)

Published by City & Guilds 1 Giltspur Street London EC1A 9DD T +44 (0)844 543 0000 (Centres) T +44 (0)844 543 0033 (Learners) F +44 (0)20 7294 2413 www.cityandguilds.com City & Guilds is a registered charity established to promote education and training Level 2 Assignment A Version 3.0 Networking, telephony and VoIP for the digital home technology integrator (7575-004) 7