XMP-2200/2300/2400 Hardware User Manual Notes about model variants The XMP-2300 and XMP-2400 models are based on XMP-2200 with the following differences: XMP-2200 Ethernet only 1 AV-out XMP-2300 Ethernet + Wi-Fi 1 AV-out XMP-2400 Ethernet + Wi-Fi 1 AV-out + 1 AV-in + 1 Component-in Wireless operations apply to XMP-2300 and XMP-2400. AV inputs apply to XMP-2400 only. All other features are identical between each model.
Contents XMP-2200/2300/2400 Hardware User Manual 0 1. Introduction 1 1.1. Features 1 1.2. Package contents 1 1.3. Mounting options 1 1.4. Physical view 2 1.5. How to set up AV input (XMP-2400 only) 3 2. Technical Data 5 2.1. Specifications 5 i
1. Introduction This document describes the hardware specification of the XMP-2200/2300/2400. 1.1. Features The XMP-2200/2300/2400 is an HD 720p high definition digital signage player featuring industrial grade mechanical design and versatile open-standard HTML5 and SMIL programmability. Support for HTML5 widgets for dynamic content (W3C Widgets standard) HD 720p hardware decoding of MPEG1/2/4, H.264, and VC-1 media formats 4GB on-board flash local storage with SD card slot Integrated audio and video output via HDMI Supports full POPAI Screen Media Formats Standards profiles S1 to S12, and E1 to E8 Multiple 3 rd party software solution compatibility Industry leading W3C SMIL support for developers (XMP-2300/2400) Built-in wireless b/g/n network (XMP-2400) Composite AV input and Component input 1.2. Package contents Media Player Unit AC Adapter (with select power plug) Ethernet cable Standard 3.5mm to RCA AV adapter Standard 3.5mm to component adapter (XMP-2400 only) RS-232 adapter (XMP-2400 only) Wi-Fi Antenna (XMP-2300/2400) SD card cover (pre-installed on unit) Quick Start Guide Software set up guide (select SKUs) Documentation CD (select SKUs) NOT INCLUDED: A USB mouse is required for system setup 1.3. Mounting options The player can be attached to mounting posts on the backs of screens or inside cabinetry with the built in VESA MIS-D100 (100mmx100mm) compatible mounting flange. 1
(For XMP-2300 and XMP-2400) ATTACH the wireless antenna as shown below, and then screw antenna clockwise onto the post. 1.4. Physical view XMP-2200/2300/2400 XMP-2400 only Physical features (left to right in above illustration) HDMI 1.3a connector for digital video and audio combined output ADB, Android debug console port 12V DC for power adapter Power and Status LED indicator 3.5mm composite AV output Ethernet port for network content update SD card slot with SD card cover USB ports for USB content update and configuration S/W Reset button to perform factory reset Wireless antenna post (XMP-2300/2400) RS-232 port (not used as telephone connector, XMP-2400 only) Composite AV input (XMP-2400 only) Component input (XMP-2400 only) VGA port for analog video output (XMP-2400 only) 2
1.5. How to set up AV input (XMP-2400 only) Steps: 1. Follow the instruction below to set up the AV input (composite or component) 2. Power on AV source (DVD player, HDTV tuner etc.) and start playing content 3. Reboot or power on XMP-2400 NOTE : It is highly recommended to connect all cables and turn on the AV source before powering on XMP-2400. Set up AV input for Composite AV input 1 Connect composite AV cable to the CVBS port on XMP-2400 Composite AV cable CVBS port (Blue) Completed 2 Connect composite AV cable to the AV source Video out (yellow) Audio out (white and red) Completed Set up AV input for Component input NOTE : Component input only carries video signal, so an audio input is required for audio signal. In this case, the CVBS port serves as audio input port and needs to be connected with an audio cable. 1 Connect component cable to the YPbPr port on XMP-2400 Component AV cable YPbPr port (Pink) Completed 3
2 Connect component cable to the AV source Component Video out (Green, Blue and Red) Completed 3 Connect audio cable to the CVBS port on XMP-2400 Audio cable CVBS port (Blue) Completed 4 Connect audio cable to the AV source Audio out (White and Red) Completed 4
2. Technical Data 2.1. Specifications Video format support Image format support Audio codec support Dynamic content Interactivity AV-in Physical I/O connectors Local storage Accessories Power requirement Power consumption* Environmental Dimensions Weight Safety Certifications Warranty XMP-2200 XMP-2300 XMP-2400 POPAI Screen Media Standards S6 (MPEG-1 SIF, 3Mbps CBR) S7 (MPEG-1 480p, 10Mbps CBR) S8 (MPEG-1 720p, 15Mbps CBR) S9 (MPEG-2 480p, 6Mbps CBR) S10 (MPEG-2 720p, 12Mbps CBR) S11 (MPEG-4 AVC, 480p, 6Mbps CBR) S12 (MPEG-4 AVC, 720p, 10Mbps CBR) E4 (VC-1/WMV9, MP@ML, 720p) E7 (MPEG-4 ASP, 480p, 10Mbps CBR) E8 (MPEG-4 AVC, 1080p, 10Mbps CBR) POPAI Screen Media Standards S1 (JPEG 480p baseline) S2 (JPEG 720p baseline) S3 (JPEG 1080p baseline) E1 (PNG 24bpp+alpha, 480p) E2 (PNG 24bpp+alpha, 720p) E3 (PNG 24bpp+alpha, 1080p) POPAI Screen Media Standards S4 (MPEG L2 audio) S5 (MP3 audio, 320Kbps) W3C HTML5 (HTML, CSS, JavaScript) W3C SMIL 3.0 instructions (sub-set) GPIO via PIO-101 module (optional) Composite(CVBS) Component(YPbPr) : Accepts wide range input up to 1080p HDMI 1.3a As XMP-2200 plus: As XMP-2200 plus: 3.5mm AV out Wi-Fi antenna port Wi-Fi antenna port RJ45 Ethernet RS-232 port USB 2.0 3.5mm composite in 3.5mm component in 4GB on-board flash memory (up to 1.8 hrs of 5 Mbps high def. video) SD card expansion slot 3.5mm-Composite AV cable Ethernet cable 12V 1.5A DC 9.6 watts max As XMP-2200 plus: Wi-Fi antenna Operating temperature: 0 40 C / 32 104 F Humidity: 5 85% @ 40 C / 32 104 F non-condensing 183 x 115 x 29mm (7.3 X 4.5 X 1.1 inches) 0.70kg 1.54lbs UL-approved AC adapters CE/FCC One-year limited parts & labor As XMP-2200 plus: Wi-Fi antenna RS-232 adapter 3.5mm-Component AV cable 5