2011 PNEUMATIC TUBING FITTING CATALOGUE FLYTECH ENGINEERING SDN BHD
GENERAL INFORMATION Flytech had cooperated with ISAIAH GROUP from Taiwan to promote the Pneumatic Fitting & Tubing. The company takes the market competition and the crisis as consciousness, earnestly implements the ISO 9001 quality specification system. Unceasingly increases and the renewal production equipment, the improvement production craft used the most advanced reasonable check-out facility to produce a guarantee product quality, added the consummation after service, enable to obtain the profession approval by NBI s brand.. 4 TUBE OUTER DIA METRIC SIZE INCH SIZE Code 4 6 8 10 12 15 16 5/32 3/16 1/4 5/16 3/8 1/2 Dia 4 6 8 10 12 15 16 5/32 3/16 1/4 5/16 3/8 1/2 5 TAPER PIPE THREAD METRIC SIZE Code M5 M6 M8 M10 M12 M12A M14 M16 M20 Dia M5 0.8 M6 1 M8 1 M10 1 M12 1.25 M12 1.5 M14 1.5 M16 1.5 M20 1.5 TAPER PIPE THREAD Code 01 02 03 04 05 Dia R1/8 R1/4 R3/8 R1/2 R3/4 www.flytech.com.my Page 1
GENERAL INFORMATION FEATURES: - After installation, the direction of tubing can be changed freely. - It is easy for them to be mounted in the narrow places. - The tube fittings come in a wide variety of models to meet all your needs in pneumatics piping. - Even after installation, the direction of the tube can be changed freely. SPECIFICATIONS: - Working temperature: -20 ~ +80 - Working Pressure: 0~1.0 Mpa - Thread: Length of threads in accordance with ISO 7.1 standard - Thread sealant on all NPT thread MATERIAL OF CONSTRUCTION - Material Range : Nickel-plated Brass, Polypropylene, Stainless Steel - O-Ring Seal : Buna Nitrile - Button: Polypropylene - Sealing Washer : Nylon - No Silicone APPLICATION - Various fluid : compressed air, fluid, compatible with material of construction - Typical Industries: Automotive, packaging, paper mills, wood working, factories with wash down processes. - Tube Compatibility : Urethane, Nylon, Polyethylene, Teflon, www.flytech.com.my Page 2
UNION ELBOW CODE Tube OD ( mm ) IPVT04 4 mm IPVT06 IPVT08 IPVT10 IPVT12 6 mm 8 mm 10 mm 12 mm STRAIGHT UNION CODE Tube OD ( mm ) IPUT04 4 mm IPUT06 6 mm IPUT08 IPUT10 IPUT12 8 mm 10 mm 12 mm CROSS UNION CODE Tube OD ( mm ) IPZT04 4 mm IPZT06 6 mm IPZT08 8 mm IPZT10 10 mm IPZT12 12 mm TEE UNION CODE Tube OD ( mm ) IPET04 4 mm IPET06 IPET08 IPET10 IPET12 6 mm 8 mm 10 mm 12 mm UNION BULKHEAD CODE Tube OD ( mm ) IPMT04 4 mm IPMT06 6 mm IPMT08 IPMT10 IPMT12 8 mm 10 mm 12 mm www.flytech.com.my Page 3
UNION Y JOINT MALE CONNECTOR CODE Tube OD ( mm ) IPY04 4 mm IPY06 6 mm IPY08 8 mm IPY10 10 mm IPY12 12 mm IPY06-04 6 mm / 4mm IPY08-06 8 mm / 6mm IPY10-08 10 mm / 8mm IPY12-10 12 mm / 10mm CODE Tube OD CODE Tube OD IPCT04-M5 4 mm M5 IPCT08-03 8 mm 3/8 IPCT04-01 4 mm 1/8 IPCT08-04 8 mm ½ IPCT04-02 4 mm ¼ IPCT10-01 10 mm 1/8 IPCT06-M5 6 mm M5 IPCT10-02 10 mm ¼ IPCT06-01 6 mm 1/8 IPCT10-03 10 mm 3/8 IPCT06-02 6 mm ¼ IPCT10-04 10 mm ½ IPCT06-03 6 mm 3/8 IPCT12-02 12 mm ¼ IPCT06-04 6 mm ½ IPCT12-03 12 mm 3/8 IPCT08-01 8 mm 1/8 IPCT12-04 12 mm ½ IPCT08-02 8 mm ¼ www.flytech.com.my Page 4
FEMALE CONNECTOR CODE Tube OD CODE Tube OD IPCFT04-M5 4 mm M5 IPCFT08-03 8 mm 3/8 IPCFT04-01 4 mm 1/8 IPCFT08-04 8 mm ½ IPCFT04-02 4 mm ¼ IPCFT10-01 10 mm 1/8 IPCFT06-M5 6 mm M5 IPCFT10-02 10 mm ¼ IPCFT06-01 6 mm 1/8 IPCFT10-03 10 mm 3/8 IPCFT06-02 6 mm ¼ IPCFT10-04 10 mm ½ IPCFT06-03 6 mm 3/8 IPCFT12-02 12 mm ¼ IPCFT06-04 6 mm ½ IPCFT12-03 12 mm 3/8 IPCFT08-01 8 mm 1/8 IPCFT12-04 12 mm ½ IPCFT08-02 8 mm ¼ MALE ELBOW CONNECTOR CODE Tube OD CODE Tube OD IPLT04-M5 4 mm M5 IPLT08-03 8 mm 3/8 IPLT04-01 4 mm 1/8 IPLT08-04 8 mm ½ IPLT04-02 4 mm ¼ IPLT10-01 10 mm 1/8 IPLT06-M5 6 mm M5 IPLT10-02 10 mm ¼ IPLT06-01 6 mm 1/8 IPLT10-03 10 mm 3/8 IPLT06-02 6 mm ¼ IPLT10-04 10 mm ½ IPLT06-03 6 mm 3/8 IPLT12-02 12 mm ¼ IPLT06-04 6 mm ½ IPLT12-03 12 mm 3/8 IPLT08-01 8 mm 1/8 IPLT12-04 12 mm ½ IPLT08-02 8 mm ¼ www.flytech.com.my Page 5
BRANCH TEE CONNECTOR CODE Tube OD CODE Tube OD IPBT04-M5 4 mm M5 IPBT08-03 8 mm 3/8 IPBT04-01 4 mm 1/8 IPBT08-04 8 mm ½ IPBT04-02 4 mm ¼ IPBT10-01 10 mm 1/8 IPBT06-M5 6 mm M5 IPBT10-02 10 mm ¼ IPBT06-01 6 mm 1/8 IPBT10-03 10 mm 3/8 IPBT06-02 6 mm ¼ IPBT10-04 10 mm ½ IPBT06-03 6 mm 3/8 IPBT12-02 12 mm ¼ IPBT06-04 6 mm ½ IPBT12-03 12 mm 3/8 IPBT08-01 8 mm 1/8 IPBT12-04 12 mm ½ IPBT08-02 8 mm ¼ RUN TEE CONNECTOR CODE Tube OD CODE Tube OD IPD04-M5 4 mm M5 IPD08-02 8 mm ¼ IPD04-M6 4 mm M6 IPD08-03 8 mm 3/8 IPD04-01 4 mm 1/8 IPD08-04 8 mm ½ IPD04-02 4 mm ¼ IPD10-01 10 mm 1/8 IPD04-03 4 mm 3/8 IPD10-02 10 mm ¼ IPD06-M5 6 mm M5 IPD10-03 10 mm 3/8 IPD06-M6 6 mm M6 IPD10-04 10 mm ½ IPD06-01 6 mm 1/8 IPD12-01 12 mm 1/8 IPD06-02 6 mm ¼ IPD12-02 12 mm ¼ IPD06-03 6 mm 3/8 IPD12-03 12 mm 3/8 IPD06-04 6 mm ½ IPD12-04 12 mm ½ IPD08-01 8 mm 1/8 IPD16-04 16 mm ½ www.flytech.com.my Page 6
SPEED CONTROLLER Feature: - Accurate regulation of an optimal airflow rate for precise motion control. - The compact design provides the comparable rang of speed as the larger ones do. - Control-out and control-in types are available for all models. - All R and NPT threads are pre-coated sealant. - All cylindrical threads are standard with O-Ring seals. SPECIFICATIONS Fluid Air(No other gases or liquids) Operating Pressure 0~150PSI 0~9Kgf/cm 2 (0-990kPa) Negative Pressure 7.5PSI 0.5Kgf/cm 2 (50kPa) Operating Temperature 32~140 0 F 0~60 0 C Applicable Tube Polyurethane and Nylon Tube-Thread(R) Tube(Inch)-Thread(NPT) ISC04-M5(B) ISC08-03(B) ISC5/32-N01(B) ISC3/8-N02(B) ISC04-01(B) ISC08-04(B) ISC3/16-N01(B) ISC3/8-N03(B) ISC04-02(B) ISC10-01(B) ISC3/16-N02(B) ISC3/8-N04(B) ISC06-M5(B) ISC10-02(B) ISC1/4-N01(B) ISC1/2-N03(B) ISC06-01(B) ISC10-03(B) ISC1/4-N02(B) ISC1/2-N04(B) ISC06-02(B) ISC10-04(B) ISC1/4-N03(B) ISC06-03(B) ISC12-02(B) ISC5/16-N01(B) ISC06-04(B) ISC12-03(B) ISC5/16-N02(B) ISC08-01(B) ISC12-04(B) ISC5/16-N03(B) ISC08-02(B) ISC5/16-N04(B) Tube ISU04 ISU06 ISU08 ISU10 ISU12 MODEL(Ф D) Tube(Inch) ISU5/32 ISU3/16 ISU1/4 ISU5/16 ISU3/8 ISU1/2 www.flytech.com.my Page 7
CHECK VALVE Applications Check valves permit airflow in one direction. Used for maintaining the output pressure at a constant level. Features The check valves permit the airflow in one direction but stops in the reverse direction. The check valve works at the pressure of 0.1kgf/cm 2, keeps 1.42Psl in vacuum and connects at a low pressure. SPECIFICATION Fluid Air (No other gases or liquids) Operating Pressure 0-150PSI 0~9.9Kgf/cm 2 (0~990Kpa) Negative Pressure -29.5in Hg -750mmHg(10Torr) Operating Temperature 32~140 O F 0~60 O C Applicable Tube Polyurethane and Nylon IPCVC04-G01(B) IPCVC06-G01(B) IPCVC06-G02(B) IPCVC08-G01(B) IPCVC08-G02(B) Tube-Thread(R) IPCVC10-G03(B) IPCVC10-G04(B) IPCVC12-G03(B) IPCVC12-G04(B) Tube-Thread(R) IPCVF01-01(B) IPCVF02-02(B) IPCVF03-03(B) IPCVF04-04(B) www.flytech.com.my Page 8
SILENCER BSL-M5 BSL-01 BSL-02 BSL-03 BSL-04 MODEL BSL-06 BSL-10 BSL-12 BSL-14 HAND VALVES Applications Used for switching compressed air. Features This product switched air on/off air pressure devices by simply turning the handle. Maintenance or inspection is possible when the remaining pressure in the device is removed. There are 4 types available depending on the method applied to air pressure flow. SPECIFICATION Fluid Air (No other gases or liquids) Operating Pressure 0-150PSI 0~9.9Kgf/cm 2 (0~990Kpa) Negative Pressure -29.5in Hg -750mmHg(10Torr) Operating Temperature 32~140 O F 0~60 O C Applicable Tube Polyurethane and Nylon HVFF06-06(B) HVFF08-06(B) HVFF08-08(B) HVFF10-08(B) Tube-Thread(R) HVFF10-10(B) HVFF12-10(B) HVFF12-12(B) www.flytech.com.my Page 9
TUBING Polyurethane Excellent memory, flexibility and resistance to kinking. Resistant to most oils & fuels Low gas and vapour permeability High Compressive set Low extractability levels Outstanding abrasion resistance Naturally transparent Temperature range -20 C to 70 C *Working pressure decrease significantly above 25 C Colour : Black, Blue, Transparent POLYURETHENE TUBING ( PU ) PART NUMBER SIZE ( OD x ID ) WORKING PRESSURE ( PSI ) STD ROLL ( M ) PUT-0425 4mm x 2.5mm 200 100 PUT-0604 6mm x 4mm 200 100 PUT-0805 8mm x 5mm 200 100 PUT-1065 10mm x 6.5mm 200 100 PUT-1280 12mm x 8mm 200 100 PUT-1/4 ¼ 200 100 PUT-3/8 3/8 200 100 PUT-1/2 ½ 200 100 Polyethylene Design for FDA application. Flexible, lightweight, low density polyethylene ( LDPE ) Tubing Formulated to resist stress cracking Temperature range -45 C to 65 C *Working pressure decrease significantly above 25 C For use with plastic or metal insert with outer sleeve ferule or clamp Colour : Blue, Black, White POLYETHYLENE TUBING ( PE ) PART NUMBER SIZE ( OD x ID ) WORKING PRESSURE ( PSI ) STD ROLL ( M ) PET-0425 4mm x 2.0mm 200 100 PET-0604 6mm x 4mm 200 100 PET-0805 8mm x 6mm 200 100 PET-1065 10mm x 7mm 200 100 PET-1280 12mm x 9mm 200 100 PET-1/4 ¼ 200 100 PET-5/16 5/16 200 100 PET-3/8 3/8 200 100 PET-1/2 ½ 200 100 www.flytech.com.my Page 10
TUBING Nylon Recommended for applications requiring low density, lightweight toughness, flexibility and chemical resistance. Temperature range -90 C to 90 C *Working pressure decrease significantly above 75 F Naturally transparent NYLON TUBING PART NUMBER SIZE ( OD x ID ) WORKING PRESSURE ( PSI ) STD ROLL ( M ) NYT-0425 4mm x 2.0mm 200 100 NYT-0604 6mm x 4mm 200 100 NYT-0805 8mm x 6mm 200 100 NYT-1065 10mm x 7mm 200 100 NYT-1280 12mm x 9mm 200 100 NYT-1/4 ¼ 200 100 NYT-5/16 5/16 200 100 NYT-3/8 3/8 200 100 NYT-1/2 ½ 200 100 PTFE(TEFLON) Recommended for applications requiring acid environment. More rigid than other material Non Sticky surface Temperature range -60 C to 120 C Naturally white PTFE TUBING PART NUMBER SIZE ( OD x ID ) WORKING PRESSURE ( PSI ) STD ROLL ( M ) PTF-0425 4mm x 2.0mm 200 100 PTF-0604 6mm x 4mm 200 100 PTF-0805 8mm x 6mm 200 100 PTF-1065 10mm x 7mm 200 100 PTF-1280 12mm x 9mm 200 100 www.flytech.com.my Page 11