Tektronix offers a wide range of cables, adapters and accessories for protocol analyzers. Find comprehensive information on the following pages and contact your local sales partner for further support.
Ordering Information... 2 Cables and Accessories for K5...2 Cables and Accessories for K8...3 Cables and Accessories for K297-G35...5 Cables and Accessories for K297-G20...6 Cables and Accessories for DASY...8 Cables and Accessories... 0 Cables and Accessories for Protocol Testers (in alphabetical order)...0 Cables and Accessories for the Digital Multiplexer K5302 (DASY)...9 Other Accessories...2 Working with Optical Couplers and Splitters... 22 Recommendations...23
Ordering Information Cables and Accessories for K5 Order Code Description Max. Qty. K5MB00 STM-/OC-3 LIF, 2 x STM-/OC-3 ATM Rx/Rx ports MPTFBR-0003 Cable, SC-SC, singlemode fiber 4 MPTFBR-0004 Cable, SC-SC, multimode fiber 4 K5MB020 E/T/J LIF, 4 x E/T/J ATM Rx/Rx ports MPTCBL-00 Monitoring Cable open ends balanced; 20 Ohm 2 MPTCBL-002 Monitoring Adapter Cable balanced; 20 Ohm; x Sub-D5m to 2x Sub-D9f 2 MPTCBL-003 Monitoring Cable coax.6/5.6; 75 Ohm 2 MPTCBL-004 Monitoring Cable Bantam connector; balanced; 20 Ohm 2 MPTCBL-006 Monitoring Cable RJ45 connector; balanced; 20 Ohm 2 K5MB030 PowerWAN, 8 x E/T/J PCM Rx/Rx ports MPTCBL-00 Monitoring Cable open ends balanced; 20 Ohm 4 MPTCBL-002 Monitoring Adapter Cable balanced; 20 Ohm; x Sub-D5m to 2xSub-D9f 4 MPTCBL-003 Monitoring Cable coax.6/5.6; 75 Ohm 4 MPTCBL-004 Monitoring Cable Bantam connector; balanced; 20 Ohm 4 MPTCBL-006 Monitoring Cable RJ45 connector; balanced; 20 Ohm 4 K5MB080 PowerWAN light, 4 x E/T/J PCM Rx/Rx; option: Ethernet plug-in 2 x 0/00 Mb/s ports MPTCBL-00 Monitoring Cable open ends balanced; 20 Ohm 2 MPTCBL-002 Monitoring Adapter Cable balanced; 20 Ohm; x Sub-D5m to 2x Sub-D9f 2 MPTCBL-003 Monitoring Cable coax.6/5.6; 75 Ohm 2 MPTCBL-004 Monitoring Cable Bantam connector; balanced; 20 Ohm 2 MPTCBL-006 Monitoring Cable RJ45 connector; balanced; 20 Ohm 2 K5MB08 Ethernet plug-in 2 x 0/00 Mb/s ports MPTCBL-007 RJ45 patch cable 2 MPTCBL-008 RJ45 patch cable crossover 2 Additional Accessories 2
Order Code Description Max. Qty. MPTAC-000 MPTAC-0002 MPTAC-0003 USB DVD Drive Transport case K5 or G35 Unit (5-slot) GPS Antenna Optical Accessories MPTFBR-0005 MPTFBR-0006 MPTFBR-0007 MPTFBR-0002 MPTFBR-002 Adapter, SC-SC, for multimode and singlemode fibers Adapter, SC-FC/PC, for multimode and singlemode fibers Adapter, SC-ST, for multimode and singlemode fibers Optical terminator; SC/PC; multimode; -32dB return loss Optical Terminator; SC/PC; single mode MPTFBR-0008 Optical Coupler (splitter) for singlemode fiber (50/50) MPTFBR-0009 Optical Coupler (splitter) for singlemode fiber (90/0) MPTFBR-000 Optical Coupler (splitter) for multimode fiber (50/50) MPTFBR-00 Optical Coupler (splitter) for multimode fiber (90/0) MPTFBR-005 LC-SC, singlemode fiber with 0dB attenuator Electrical Accessories MPTCBL-0002 Patch cable; RJ45-RJ45, CAT6 S-FTP; length: 3m MPTCBL-0003 Patch cable; RJ45-RJ45, CAT6 S-FTP; length: 0.5m MPTCBL-0020 Adapter coax. BNC to DIN.6/5.6; 75 Ohm Cables and Accessories for K8 Order Code Description Max. Qty. K8HW-2STM STM-/OC-3 probe, 2x STM-/OC-3 ATM Rx/Rx ports MPTFBR-0003 Fiber optical cable; SC-SC; singlemode; length: 2m 4 MPTFBR-0004 Fiber optical cable; SC-SC; multimode; length: 2m 4 K8HW-GBE-RJ GBE probe, electrical interface 4x Rx 00/000 Mb/s MPTCBL-0002 Patch cable; RJ45-RJ45, CAT6 S-FTP; length: 3m 4 MPTCBL-0003 Patch cable; RJ45-RJ45, CAT6 S-FTP; length: 0.5m 4 K8HW-GBE-SFP GBE probe, connectors for 4 Rx 000 Mb/s SFP modules 3
Order Code Description Max. Qty. K8HW-SFPLX SFP module optical interface x Rx; 300nm; LC connector (singlemode) 4 K8HW-SFPSX SFP module optical interface x Rx; 850nm; LC connector (multimode) 4 K8HW-SFPT SFP module 000BaseT; x Rx 4 K8HW-SFPLX SFP module optical interface x Rx; 300nm; LC connector (single mode) MPTFBR-004 LC-SC, singlemode fiber; interface: PCE STM-; length: 2m K8HW-SFPSX SFP module optical interface x Rx; 850nm; LC connector (multi mode) MPTFBR-006 LC-SC, multimode fiber; interface: PCE STM-; length: 2m K8HW-SFPT SFP module 000BaseT; x Rx MPTCBL-0002 Patch cable; RJ45-RJ45, CAT6 S-FTP; length: 3m MPTCBL-0003 Patch cable; RJ45-RJ45, CAT6 S-FTP; length: 0.5m Additional Accessories K8AC-BAG K8HW-RCK Transport Bag for K8 hardware (For two K8 units or one K8 unit and one laptop) Rack mount kit (for two K8 probes) Optical Accessories MPTFBR-0005 Adapter, SC-SC, for multimode and singlemode fibers MPTFBR-0006 Adapter, SC-FC/PC, for multimode and singlemode fibers MPTFBR-0007 MPTFBR-0002 MPTFBR-002 Adapter, SC-ST, for multimode and singlemode fibers Optical terminator; SC/PC; multimode; -32dB return loss Optical Terminator; SC/PC; single mode MPTFBR-0008 Optical Coupler (splitter) for singlemode fiber (50/50) MPTFBR-0009 Optical Coupler (splitter) for singlemode fiber (90/0) MPTFBR-000 Optical Coupler (splitter) for multimode fiber (50/50) MPTFBR-00 Optical Coupler (splitter) for multimode fiber (90/0) MPTFBR-005 LC-SC, singlemode fiber with 0dB attenuator Electrical Accessories MPTCBL-0002 Patch cable; RJ45-RJ45, CAT6 S-FTP; length: 3m 4
Order Code Description Max. Qty. MPTCBL-0003 Patch cable; RJ45-RJ45, CAT6 S-FTP; length: 0.5m MPTCBL-000 Timesync Connecting cable; SMB-SMB (female both); coax 50 Ohm; length: 3m MPTCBL-0005 Timesync Connecting cable; SMB-SMB (female both); coax 50 Ohm; length: 0.4m MPTCBL-0006 Timesync Connecting cable; SMB-SMB (female both); coax 50 Ohm; length: 0m Cables and Accessories for K297-G35 Order Code Description Max. Qty. G35SB00 STM-/OC-3 LIF, 2 x STM-/OC-3 ATM Rx/Tx ports MPTFBR-004 LC-SC, singlemode fiber; interface: STM-; length: 2m 4 MPTFBR-006 LC-SC, multimode fiber; interface: STM-; length: 2m 4 G35SB020 E/T/J LIF, 4 x E/T/J ATM Rx/Tx ports MPTCBL-0022 adapter cable; x Sub-D25m to 4x Sub-D9f MPTCBL-0023 Cable Bantam; x Sub-D25m to 4x Bantam MPTCBL-0024 Cable open ends; x Sub-D25m to 4x open ends MPTCBL-0025 Cable coax; x Sub-D25m to 4x coax.6/5.6 G35SB040 Gigabit Ethernet 2x Rx/Tx MPTCBL-0002 Patch cable; RJ45-RJ45, CAT6 S-FTP; length: 3m 2 MPTCBL-0003 Patch cable; RJ45-RJ45, CAT6 S-FTP; length: 0.5m 2 G35SB080 PowerWAN light, 4 x E/T/J PCM Rx/Tx MPTCBL-0026 Simulation Cable coax.6/5.6; 75 Ohm 2 MPTCBL-0027 Simulation Adapter Cable balanced; 20 Ohm; x Sub-D5m to 2x Sub-D9f 2 MPTCBL-0028 MPTCBL-0029 MPTCBL-003 Simulation Cable open ends balanced; 20 Ohm; interface: E/DS; length: 3m Simulation Cable Bantam connector; balanced; 20 Ohm; interface: E/DS; length: 3m Simulation Cable RJ45 connector; balanced; 20 Ohm; interface: E/DS; length: 3m 2 2 2 Additional Accessories MPTAC-000 MPTAC-0002 USB DVD Drive Transport case K5 or G35 Unit (5-slot) 5
Order Code Description Max. Qty. Optical Accessories MPTFBR-0005 MPTFBR-0006 MPTFBR-0007 MPTFBR-0002 MPTFBR-002 Adapter, SC-SC, for multimode and singlemode fibers Adapter, SC-FC/PC, for multimode and singlemode fibers Adapter, SC-ST, for multimode and singlemode fibers Optical terminator; SC/PC; multimode; -32dB return loss Optical Terminator; SC/PC; singlemode MPTFBR-0008 Optical Coupler (splitter) for singlemode fiber (50/50) MPTFBR-0009 Optical Coupler (splitter) for singlemode fiber (90/0) MPTFBR-000 Optical Coupler (splitter) for multimode fiber (50/50) MPTFBR-00 Optical Coupler (splitter) for multimode fiber (90/0) MPTFBR-005 LC-SC, singlemode fiber with 0dB attenuator Electrical Accessories MPTCBL-0020 Adapter coax. BNC to DIN.6/5.6; 75 Ohm Cables and Accessories for K297-G20 Order Code Description Max. Qty. 7KK200-3CB STM-/OC-3 LIF, 2 x STM-/OC-3 ATM Rx/Tx ports MPTFBR-004 LC-SC, singlemode fiber; interface: PCE STM-; length: 2m 4 MPTFBR-006 LC-SC, multimode fiber; interface: PCE STM-; length: 2m 4 7KK200-3CC E/T/J LIF, 4 x E/T/J ATM Rx/Tx ports MPTCBL-0022 adapter cable; SUB-D25 male to 4x SUB-D9 female MPTCBL-0023 Cable Bantam; SUB-D25 male to 4x Bantam MPTCBL-0024 Cable open ends; SUB-D25 male to 4x open ends MPTCBL-0025 Cable coax; SUB-D25 male to 4x coax..6/5.6 7KK200-3CD E/T/J LIF, 4 x E/T/J ATM Rx/Rx ports MPTCBL-00 Monitoring Cable open ends balanced; 20 Ohm 2 MPTCBL-002 Monitoring Adapter Cable balanced; 20 Ohm; xsub-d5m to 2xSub-D9f 2 MPTCBL-003 Monitoring Cable coax.6/5.6; 75 Ohm 2 6
Order Code Description Max. Qty. MPTCBL-004 Monitoring Cable Bantam connector; balanced; 20 Ohm 2 MPTCBL-006 Monitoring Cable RJ45 connector; balanced; 20 Ohm 2 7KK200-3CE STM-/OC-3 LIF, 2 x STM-/OC-3 ATM Rx/Rx ports MPTFBR-0003 Cable, SC-SC, singlemode fiber 4 MPTFBR-0004 Cable, SC-SC, multimode fiber 4 7KK200-2Px PCM board PRIME, 4x Simulation or 2x Monitoring 7KK200-5CB cable Bantam (20 Ohm) for K205 and K297; length: 3.0 m 2 7KK200-5CC cable coax (75 Ohm) for K205 and K297; length:.5 m 2 7KK200-5CD cable three poles (20 Ohm) for K205 and K297; length: 3.0 m 2 7KK200-5CE cable open ends (20 Ohm) for K205 and K297; length: 3.0 m 2 7KK200-5CF loop back cable for K297; length: 0.3 m 2 7KK200-2MM PCM board PRIMO for E / DS interface (2.048 Mbit/s /.544 Mbit/s), 4x Monitoring 7KK200-5CB cable Bantam (20 Ohm) for K205 and K297; length: 3.0 m 4 7KK200-5CC cable coax (75 Ohm) for K205 and K297; length:.5 m 4 7KK200-5CD cable three poles (20 Ohm) for K205 and K297; length: 3.0 m 4 7KK200-5CE cable open ends (20 Ohm) for K205 and K297; length: 3.0 m 4 7KK200-2EE Ethernet board; 4x Rx 0/00 Mb/s MPTCBL-007 RJ45 patch cable 4 MPTCBL-008 RJ45 patch cable crossover 4 Additional Accessories MPTAC-000 7KK200-5HB 7KK200-5BG 7KK200-5BH 7KK200-5BR 7KK200-5BS USB DVD Drive (for Windows XP units only) external SCSI CD-R/W drive carrying bag for 4-slot Unit carrying bag for 7-slot Unit Transport case for 4-slot Unit Transport case for 7-slot Unit Optical Accessories MPTFBR-0005 Adapter, SC-SC, for multimode and singlemode fibers 7
Order Code Description Max. Qty. MPTFBR-0006 MPTFBR-0007 MPTFBR-0002 MPTFBR-002 Adapter, SC-FC/PC, for multimode and singlemode fibers Adapter, SC-ST, for multimode and singlemode fibers Optical terminator; SC/PC; multimode; -32dB return loss Optical Terminator; SC/PC; single mode MPTFBR-0008 Optical Coupler (splitter) for singlemode fiber (50/50) MPTFBR-0009 Optical Coupler (splitter) for singlemode fiber (90/0) MPTFBR-000 Optical Coupler (splitter) for multimode fiber (50/50) MPTFBR-00 Optical Coupler (splitter) for multimode fiber (90/0) MPTFBR-005 LC-SC, singlemode fiber with 0dB attenuator Electrical Accessories MPTCBL-0020 7KK200-5CZ Adapter coax. BNC to DIN.6/5.6; 75 Ohm Adapter RJ45 to DSUB9; shielded Cables and Accessories for DASY Order Code Description Max. Qty. 7KK5302-2MA Input module DDM-2 for 8x E/T 7KK5302-5AA0 Cable set for input module DDM; balanced, 20 Ohm, open ends; length: 5 meter 7KK5302-5AA02 Cable set for input module DDM; unbalanced, 75 Ohm, open ends; length: 5 meter 7KK5302-5AB0 Cable set for input module DDM; balanced, 20 Ohm, open ends; length: 6 meter 7KK5302-5AB02 7KK5302-5AC0 7KK5302-5AC02 Cable set for input module DDM; unbalanced, 75 Ohm, open ends; length: 6 meter Cable set for input module DDM; balanced, 20 Ohm, open ends; length: 0 meter Cable set for input module DDM; unbalanced, 75 Ohm, open ends; length: 0 meter 7KK5302-5AX0 Upgrade of a set of DDM cables open ends (7KK5302-5Ax02) to Coax,6 / 5.6 (for 7KK5302-5Ax02) 7KK5302-2SB Output module DDA-2 for 4x E/T + 4x E/T input 8
Order Code Description Max. Qty. 7KK5302-5BA0 Cable set for output module DDA; for connection to K297-G20; lenght: 5 meter 7KK5302-5BA02 Cable set for output module DDA; unbalanced, 75 Ohm, open ends; length: 5 meter 7KK5302-5BB0 Cable set for output module DDA; for connection to K297-G20; lenght: 6 meter 7KK5302-5BB02 Cable set for output module DDA; unbalanced, 75 Ohm, open ends; length: 6 meter 7KK5302-5BB03 Cable set for output module DDA; for connection to K5; lenght: 3 meter 7KK5302-5BC0 Cable set for output module DDA; for connection to K297-G20; lenght: 0 meter 7KK5302-5BC02 Cable set for output module DDA; unbalanced, 75 Ohm, open ends; length: 0 meter 7KK5302-5BC03 Cable set for output module DDA; for connection to K5; lenght: 0 meter 7KK5302-5BX0 Upgrade of a set of DDA cables open ends (7KK5302-5Bx02) to Coax,6 / 5.6 (for 7KK5302-5Bx02) 7KK5302-5CA0 Cable DDA to DDM for cascading of DASY's; length:.5 meter 7KK5302-5CB0 Cable DDA to DDM for cascading of DASY's; length: 5 meter 7KK5302-5CC0 Cable DDA to DDM for cascading of DASY's; length: 0 meter Additional Accessories 7KK5302-5DA0 7KK5302-5EA0 K5302 HW mounting kit for 9'' rack V.24 remote control cable for DASY 9
Cables and Accessories Cables and Accessories for Protocol Testers (in alphabetical order) Note: Drawings not to scale. "DUT": Device Under Test 7KK200-5CB: cable BANTAM (20 Ohm) for K205 and K297; length: 3.0 m, shielded; interface: PRI 7KK200-5CC: cable COAX (75 Ohm) for K205 and K297; length:.5 m, floating; interface: PRI 7KK200-5CD: cable three poles (20 Ohm) for K205 and K297; length: 3.0 m, shielded; interface: PRI 7KK200-5CE: cable open ends (20 Ohm) for K205 and K297; length: 3.0 m, shielded; interface: PRI 0
7KK200-5CF: loop back cable for K297; length: 0.3 m, shielded; interface: PRI 7KK200-5CZ: Adapter RJ45 to DSUB9; shielded; for K03, K205, K297; interface: PRI.; length: 2m (C73249-A97-B48) MPTCBL-00: Monitoring Cable open ends; balanced; 20 Ohm; x Sub-D5m (tester) to 4x open ends; interface: E/DS; length: 3m (02-627-xx) MPTCBL-002: Monitoring Adapter Cable; balanced; 20 Ohm; x Sub-D5m (tester) to 2x Sub-D9f (IUT); interface: E/DS; length: 0.2m (02-62-xx) MPTCBL-003: Monitoring Cable coax.6/5.6; 75 Ohm; x Sub-D5m (tester) to 4x coax.6/5.6; interface: E/DS; length: 3m (02-634-xx)
MPTCBL-004: Monitoring Cable Bantam; balanced; 20 Ohm; x Sub-D5m (tester) to 4x Bantam connector; interface: E/DS; length: 3m (02-629-xx) MPTCBL-006: Monitoring Cable RJ45; balanced; 20 Ohm; x Sub-D5m (tester) to 2x RJ45 connector; interface: E/DS; length: 3m (02-635-xx) MPTCBL-007: Ethernet STP patch cable; RJ45 plug; CAT5 00 MHz; shielded; length: 2m (74-442-xx) MPTCBL-008: Ethernet STP crossover patch cable; RJ45 plug; CAT5 00 MHz; shielded; length: 2m (74-443-xx) MPTCBL-0020: Adapter coax BNC to DIN.6/5.6; 75 Ohm; for cable COAX (W73072- U360-U) 2
MPTCBL-0022: Simulation Adapter Cable; balanced; 20 Ohm; interface: sim ATM E/T; x Sub-D25m (tester) to 4x Sub-D9f; length 0.3m; shielded; (02-647-xx) MPTCBL-0023: Simulation Cable Bantam; balanced; 20 Ohm; interface: sim ATM E/T; x Sub-D25m (tester) to 8x Bantam; length 3m; shielded (02-652-xx) MPTCBL-0024: Simulation Cable open ends; balanced; 20 Ohm; interface: sim ATM E/T; x Sub-D25m (tester) to 8x open ends; length: 3m; shielded (02-653-xx) 3
MPTCBL-0025: Simulation Cable coax; 75 Ohm; interface: sim ATM E/T; x Sub-D25m (tester) to 8x coax.6/5.6; length: 3m (02-654-xx) MPTCBL-0026: Simulation Cable coax; 75 Ohm; x Sub-D5m (tester) to 4x coax.6/5.6; interface: PCM E/DS; length: 3m (02-633-xx) MPTCBL-0027: Simulation Adapter Cable; balanced; 20 Ohm; interface: sim PCM E/DS; x Sub-D5m (tester) to 2xSUB-D9f (IUT); length: 0.2m (02-63-xx) MPTCBL-0028: Simulation Cable open ends; balanced; 20 Ohm; x Sub-D5m (tester) to 4x open ends; interface: PCM E/DS; length: 3m (02-628-xx) 4
MPTCBL-0029: Simulation Cable Bantam connector; balanced; 20 Ohm; x Sub-D5m (tester) to 4x Bantam connector; interface: PCM E/DS; length: 3m (02-629-xx) MPTCBL-003: Simulation Cable RJ45 connector; balanced; 20 Ohm; x Sub-D5m (tester) to 2x RJ45; interface: PCM E/DS; length: 3m (02-636-xx) MPTCBL-0032: Monitoring Cable Bantam connector; balanced; 20 Ohm; x Sub-D5m (tester) to 4x Bantam connector; interface: PCM E/DS; length: 8m (02-698-xx) MPTFBR-0002: Optical terminator; SC/PC; multimode; -32dB return loss (0-080-xx) MPTFBR-0003: Fiber optical cable; SC-SC; singlemode; length: 2m (74-5200-xx) 5
MPTFBR-0004: Fiber optical cable; SC-SC; multimode; length: 2m (74-5202-xx) MPTFBR-0005: Adapter, SC-SC, for multimode and singlemode fibers (376-0254-xx) MPTFBR-0006: Adapter, SC-FC/PC, for multimode and singlemode fibers (3-6785-xx) MPTFBR-0007: Adapter, SC-ST, for multimode and singlemode fibers (376-0253-xx) 6
MPTFBR-0008: Optical Coupler (splitter) for singlemode fiber (50/50, loss 4. db/4. db, SC/SC/SC); wavelength: 30+-50nm/550+50nm-00nm; includes: fiber, SC/SC connector, optical terminator MPTFBR-0009: Optical Coupler (splitter) for singlemode fiber (90/0, loss. db/2.9 db, SC/SC/SC); wavelength: 30+-50nm/550+50nm-00nm; includes: fiber, SC/SC connector, optical terminator MPTFBR-000: Optical Coupler (splitter) for multimode fiber (50/50, loss 4. db/4. db, SC/SC/SC); wavelength: 300+-40nm; includes: fiber, SC/SC connector, optical terminator 7
MPTFBR-00: Optical Coupler (splitter) for multimode fiber (90/0, loss. db/2.9 db, SC/SC/SC); wavelength: 300+-40nm; includes: fiber, SC/SC connector, optical terminator MPTFBR-002: Optical terminator; SC/PC; singlemode; -50dB return loss (0-079-xx) MPTFBR-004: Fiber optical cable, LC-SC, singlemode fiber; interface: STM-; length: 2m (74-4668-xx) MPTFBR-005: Fiber optical cable, LC-SC, singlemode fiber with 0dB attenuator; interface: STM-; length: 2m (74-4670-xx) 8
MPTFBR-006: Fiber optical cable, LC-SC, multimode fiber; interface: STM-; length: 2m (74-4669-xx) Cables and Accessories for the Digital Multiplexer K5302 (DASY) 7KK5302-5AA0 (5 m), -5AB0 (6 m), -5AC0 (0 m): DDM Cable (DB 5 male connector). Balanced (20 Ω) with open ends for custom DUT connectors 7KK5302-5AA02 (5 m), -5AB02 (6 m), -5AC02 (0 m): DDM Cable (DB 5 male connector).unbalanced (75 Ω) with open ends for custom DUT connectors 7KK5302-5AX0: Conversion of an Unbalanced DDM Cable with Open Ends (7KK5302-5Ax02) to Coax.6/5.6 9
7KK5302-5BA0 (5 m), -5BB0 (6 m), -5BC0 (0 m): DDA Cable (DB 5 male connector). Balanced (20 Ω) with DB 9 male connector suitable for K205, K297 7KK5302-5BB03 (3 m), -5BC03 (0 m): DDA Cable (2x Sub-D5 male connector to x Sub- D5 male connector; balanced, 20 OHM); suitable for connection to K5 NO FIGURE 7KK5302-5BA02 (5 m), -5BB02 (6 m), -5BC02 (0 m): DDA Cable. Unbalanced (75 Ω) 7KK5302-5BX0: Upgrade of a set of DDA Cables Open Ends (7KK5302-5Bx02) to Coax,6/5.6 20
7KK5302-5CA0 (.5 m), -5CB0 (5 m), -5CC0 (0 m): Cable DDA (2 DB 5 male connectors) to DDM (DB 5 male connector) for DASY cascading NO FIGURE 7KK5302-5EA0: V.24 remote control cable for DASY NO FIGURE 7KK5302-5DA0: K5302 HW mounting kit for 9'' rack Other Accessories Order Code Description For Product 7KK200-5BG Transport Bag K297-G20, 4 Slot 7KK200-5BH Transport Bag K297-G20, 7 Slot 7KK200-5BR Transport Case K297-G20, 4 Slot 7KK200-5BS Transport Case K297-G20, 7 Slot 7KK200-5HB External SCSI CD-R/W Drive K297-G20 7KK200-5HP PCMCIA/PC-Card Modem 56 k K297-G20 7KK200-5HR External ISDN-Modem K297-G20 7KK200-5HS Telephone Handset Interface: BAI, PRI K297-G20 MPTAC-000 USB DVD R/W drive K5, K297-G35 MPTAC-0002 Transport case K5, K297-G35 MPTAC-0003 GPS antenna, cable and accessories K5 2
Working with Optical Couplers and Splitters Tektronix protocol testers offer two types of monitoring: passive monitoring using each type of measuring boards (Rx/Rx and Rx/Tx) active monitoring using measuring boards with receivers and transmitters only (Rx/Tx only) Configuration for Active Monitoring Configuration for Passive Monitoring If your Device under Test (IUT) does not have monitoring points, you must connect the protocol tester via couplers to the transmission line. Optical couplers are required for passive monitoring. are not required for active monitoring. have one input and two outputs. split an optical input signal into two optical output signals. divide the power of the input signal either into equal shares (symmetrical couplers) or into unequal shares (asymmetrical couplers). Tektronix offers four types of optical couplers: Single mode, symmetrical coupler 50/50: 7KK200-5KS / K5CA020 Single mode, asymmetrical coupler 90/0: 7KK200-5KT / K5CA02 Multimode, symmetrical coupler 50/50: 7KK200-5KV / K5CA022 Multimode, asymmetrical coupler 90/0: 7KK200-5KU/ K5CA023 22
Select the required coupler dependent on your measurement scenario: Chose single mode couplers for single mode DUTs. Chose multimode couplers for multimode DUTs. To select the coupler with the correct split ratio you need to consider the following technical data of your measurement environment: o Optical input power at the DUTs and at the protocol tester o Minimal optical sensitivity of the DUTs and of the protocol tester o Line attenuation between DUTs and protocol tester Make sure that the power at DUTs and protocol tester is always within the specified operating range of these measurement components. The correct split ratio must ensure that the optical input power at the network components is greater than the minimal optical sensitivity of those components. Recommendations Note: Find below some general advice. Please keep in mind that it may not deliver the best results in any configuration. Use symmetrical couplers for measurement scenarios with small distances between DUTs and protocol tester. Use asymmetrical couplers for measurement scenarios with medium and large distances between DUTs and protocol tester. 23
24
Tektronix Communications Business Division Enabling Next-Generation Network Innovation Tektronix Communications Business enables the world s largest network operators and equipment manufacturers to design, build, test, deploy and manage current and advanced communication networks. With the convergence of voice, data and video into the latest generation IP multiservice mobile and fixed networks, the requirements for monitoring and testing networks and their elements are becoming more complex every day. Leveraging a 60- year heritage of enabling innovation, Tektronix empowers network operators and equipment manufacturers to lead the way toward fixed mobile convergence, broadband wireless access and triple play services by supporting current and advanced protocols, applications and architectures, such as IP multimedia subsystems (IMS), 3G wireless, WiMAX and IPTV. As a result of our dedication to innovation, as well as our customers, Tektronix systems manage more than 30 percent of the world s calls, and our network diagnostic and performance monitoring solutions are installed in 0 carrier networks in 43 countries. For Further Information Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tektronix.com Contact Tektronix: Please visit www.tektronix.com/ communcations Phone: +-800-833-9200 option +-469-330-4000 Locate your nearest Tektronix representative www.tektronix.com/contactus Copyright 2007, Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks or registered trademarks of their respective companies. 03/07 2FW-2640-8