CB71C Rugged COM Express Module with AMD V1000

Similar documents
CM10 Rugged COM Express with TI Sitara ARM Cortex-A15

G52A. QorIQ Enhanced Network CPU Board. Data Sheet. CompactPCI Serial

CB70C Rugged COM Express (VITA 59 RCE) with Intel Core i7

G229 Serial I/O Expansion Board

NM10 Smart Managed 8-Port Railway Ethernet Switch

BC51M Rugged Industrial Box PC with Intel Apollo Lake-I

M77N Mezzanine Card with 4 UARTs

NM11 Smart Managed 8-Port Rugged PoE Switch

BL51E Rugged Box PC for Transportation with Intel Apollo Lake-I

ME1 DIN Rail Wireless Communication Component

DC15 Rugged 10.4" Panel PC with Front Keys or Touch Screen

A23C TI Sitara ARM Cortex-A15 CPU

DC17 Rugged 12.1" Panel PC

BC50F Rugged Box PC for Industrial Automation with AMD G-Series

F305 Quad Fast Ethernet / Real-Time Ethernet Interface

BC50I Rugged Box PC for Industrial Automation with AMD G-Series

GM2 Octal Gigabit Ethernet Rear I/O Card

G211F 3U CompactPCI Serial Quad Fiber Optics Interface

XC15 Rugged COM Express Evaluation Carrier Board

F223 3U CompactPCI PCIe Mini Card Carrier for Wireless Functions

BE10A Entry-Level Box PC for Industrial Applications

MH70I Rugged 19" Modular Industrial PC

PX4 Mobile Phone Voice Interface PCI Express Mini Card

F701 3U CompactPCI MVB Interface Card

G51 3U CompactPCI Serial QorIQ Communications CPU Board

BC50M Rugged Box PC for Transportation with AMD G-Series

M57 Profibus DP Master Interface

M81 16 Binary Outputs

DC13 Rugged 8.4" Panel PC with Front Keys

A17 Embedded Single Board Computer with PowerPC MPC8548

DC13 Rugged 8.4" Panel PC with Front Keys

M82 16 Binary Inputs. Embedded Solutions for Transportation and Industrial Markets

PU5 3U 12 HP Power Supply Unit PSU, 110 VDC, 100 W

PU4 3U 8 HP Power Supply Unit PSU, 72 to 110 VDC, 35 W

RS4 IP67 Industrial Ethernet Switch

DC2 Rugged 10.4" Touch Panel PC

SF4 3U 19" Industrial Ethernet Switch

M35N 8/16 Analog Inputs, 14 Bits

NM50 IOT & Gateway Computer or WLAN Access Point

A21C Embedded Single Board Computer, QorIQ P1xxx, PMC/XMC

BL70W Rugged Box PC for Transportation with Intel Core i3 / i5 / i7

SC27 Intel Atom SBC for Intelligent Displays

PX1 GLONASS & GPS PCI Express Mini Card

NM50 Mobile Gateway & WLAN Access Point

SC27 Intel Atom SBC for Intelligent Displays

D601 - Conduction-Cooled 6U CPCI Pentium M SBC

EM02 - ESM with Pentium III

EM07 - ESM with Pentium III / Celeron

G22 3U CompactPCI Serial Intel Core i7 CPU Board

F18-3U CompactPCI /Express Core 2 Duo SBC

NM31 Fully Managed 8-Port Industrial Ethernet Switch with PoE

P517 - Graphics Accelerator PMC

PX7. User Manual. PCIe Mini Card to M.2 Adapter. PCI Express Mini Card

G211F 3U CompactPCI Serial Quad Fiber Optics Interface

EK01 - ESM Starter Kit with Pentium III

F302-3U CompactPCI Managed 8+1-Port Eth. Switch

B12-3U VMEbus PowerPC SBC

F9-3U CompactPCI PentiumM SBC

RS1 IP67 Industrial Ethernet Switch

F18-3U CompactPCI /Express Core 2 Duo SBC

D4-6U CompactPCI Pentium 4 SBC

20F E F217 3U CompactPCI Memory Card Carrier. Embedded Solutions. Configuration example. User Manual

D4-6U CompactPCI /PXI Pentium 4 SBC

Safe and Rugged Computer-On-Modules. Powerful Small Form Factors for Harsh Environments

BC50M Box PC for In-Vehicle Applications

F9-3U CompactPCI Pentium M SBC

B6-3U VMEbus 68k Communication Controller

F9-3U CompactPCI PentiumM SBC

F17-3U CompactPCI /Express Core 2 Duo SBC

D302-6U CompactPCI Card with 128 Binary I/Os

F4-3U CompactPCI PowerPC Peripheral SBC

NM30 Managed 8-Port Rugged Industrial Ethernet Switch

F9-3U CompactPCI/PXI Pentium M SBC

Rugged COM Express. Safe and Reliable for Harsh Environments

D3B - 6U CompactPCI MPC8245 SBC / M-Module

A12C - 6U VMEbus MPC8245 SBC / PMC

BL50S Rugged Box PC for Storage Applications (AMD)

3U CompactPCI Intel SBCs F14, F15, F17, F18, F19P

EM04 - ESM with PowerPC MPC 8245

VRM-Express-HL. Overview:

F7-3U/6U CompactPCI/PXI Pentium III SBC

A15C - 6U VME64 MPC8245 SBC / PMC

Procelerant CEQM57XT

New. Audio Chipset Intel HD Audio integrated in chipset. Ethernet

C802 Core i7 3U CompactPCI SBC

20AD67-00 E AD67 6U I/O Extension for A12, A15, D3, SC13. Embedded Solutions. Configuration example. User Manual

NM10. Unmanaged 8-Port Rugged Ethernet Switch. User Manual

MIL-STD-1553 (T4240/T4160/T4080) 12/8/4 2 PMC/XMC 2.0 WWDT, ETR, RTC, 4 GB DDR3

. Micro SD Card Socket. SMARC 2.0 Compliant

C th Gen. Intel Core i7 6U VME SBC. Aitech. Rugged 6U VME Single-Slot SBC 5 th Generation Intel Core i7 CPU

MSC8144AMC-S Getting Started Guide

EM8 - ESM with PowerPC MPC8540 (PowerQUICC III)

A15a - 6U VME64 PowerPC SBC with PC-MIPs

Embedded Industrial Computing

SOM IB8000 Quad Core SOM (System-On-Module) Rev 1.3

F21P 3U CompactPCI PlusIO Intel Core i7 CPU Board

CPC506. Best solutions to fit your demands! cpci 3U 8HP CPU Module.

fitlet-rm specifications

. SMARC 2.0 Compliant

F22P 3U CompactPCI PlusIO Intel Core i7 CPU Board

Transcription:

CB71C Rugged COM Express Module with AMD V1000 ANSI-VITA 59 RCE Module www.men.de/products/cb71c/» AMD V1000 APU» Up to 32 GB DDR4 RAM with ECC» Up to 4 Digital Display Interfaces (DP, edp, HDMI, DVI)» Hardware memory encryption» Safety-relevant supervision functions» Virtualization-ready» Excellent price-performance ratio» -40 C to +85 C Tcase, depending on processor» Conduction cooling» VITA 59 in process, compliant with COM Express Basic, type 6» PICMG COM.0 COM Express version also available Ultra-rugged VITA 59 COM Express The CB71C is an ultra-rugged COM Express module for rail, public transportation and industry applications, e.g. data acquisition, infotainment, transcoding, live 3D. It is 100% compatible to COM Express Type 6 Pin-Out and conforms to the VITA 59 standard which specifies the mechanics to ensure reliable operation even under the harshest environmental conditions. Perfect for Harsh Environments The modules are embedded in a closed aluminum frame, which ensures optimum EMC protection and efficient conduction cooling. Direct air cooling is possible by placing a heat sink on the cover. The CB71C is designed for operation from -40 C to +85 C (housing). To withstand serious shock and vibration, only soldered components are used. The design is optimized for conformal coating. Powerful Processing and Graphics on a Single Chip The CB71C is based on AMD's V1000 APU family. It is equipped with a Radeon Vega next-generation 3D graphics engine and supports up to 4 displays with a resolution of up to 4k without the need for additional graphics hardware. With up to four high-performance processor cores and AMD-V extension, the CB71C is also suitable for virtualization. Excellent Price/Performance Ratio, Flexible Design The CB71C can be equipped with a wide range of longterm available processors with scalable performance, all supporting ECC. Passive cooling is possible with lowpower versions. Safety and Security The board features an advanced board management controller with monitoring functions for safety-relevant applications. In addition, the CB71C has a Trusted Platform Module and supports hardware memory encryption, providing protection against both physical and inter-vm storage attacks. This is essential for security-critical applications such as payment and ticketing terminals, fleet management or monitoring. Memory and I/O The CB71C can be equipped with up to 32 GB of directly soldered DDR4 main memory and a 16 GB emmc. Available high-speed interfaces include PCI Express 3.0 links, DDI (DP, edp, HDMI), SATA 3.0, Gigabit Ethernet and USB 3.0. Data Sheet CB71C Data Sheet 2018-02-26 Page 1

B Onboard Options ECC DDR4 SDRAM emmc Gb Ethernet Ethernet Ctrl PCIe 3.0 x1 PCIe Switch SATA (6 Gb) USB 2.0 USB 3.1 PCIe 3.0 x1 AMD V1000 APU UART PCIe 3.0 x4 HD Audio DisplayPort 1.4 4 GPO 4 GPI I/O Expander Reset RTC SMBus BMC SPI Boot Flash TPM COM Express Connectors B Diagram CB71C Data Sheet 2018-02-26 Page 2

CPU Memory The following CPU types are supported: AMD V1404I, 4 cores, 4 threads, tbd GHz, 15W, 2 MB cache AMD V1807B, 4 cores, 8 threads, 3.35 GHz, 35-54W, 2 MB cache System RAM Soldered DDR4, ECC 32 GB max. Security TPM (Trusted Platform Module 2.0) Mass Storage Graphics Interfaces Supervision and Control Product Standard Computer-On-Module Standard The following mass storage devices are assembled: emmc (soldered); 16 GB max. Processor graphics Maximum resolution: 4096x2160 pixels @ 60 Hz, 24 bpp (DisplayPort 1.4) SATA 2x SATA Revision 3.x, board to board Video 4x DisplayPort, board to board HD Audio 1x, board to board USB 3x USB 3.1, board to board 3x USB 2.0, board to board PCI Express 7x PCIe 3.0, x1, board to board 1x PCIe 3.0, x4, board to board Ethernet 1x 1000BASE-T, board to board Serial 2x UART, board to board Physical interfaces, e.g., RS232 or RS422/RS485, depending on implementation on carrier board GPIO 4x GPI, board to board 4x GP0, board to board Reset 1x, board to board Board management controller Watchdog timer Temperature measurement Real-time clock VITA 59 RCE: Basic, Pin-out Type 6, VITA 59 RCE Rugged COM Express in process COM Express: Basic, Pin-out Type 6, PICMG COM.0 COM Express Module Base Specification CB71C: VITA 59 RCE: Rugged COM Express in process With conduction cooling cover and frame Rugged COM Express Basic, Module Pin-out Type 6 CB71: PICMG COM.0 COM Express Module Base Specification COM Express Basic, Module Pin-out Type 6 Technical Data CB71C Data Sheet 2018-02-26 Page 3

Electrical Specifications Mechanical Specifications Environmental Specifications Safety EMC (Railway) EMC (Automotive) BIOS Software Support Supply voltage +12 V (9.5 to 15.5 V) Dimensions 135 mm x 105 mm x 18 mm (models conforming to VITA 59 RCE Basic format, PCB mounted between a cover and a frame) 125 mm x 95 mm (models conforming to PICMG COM.0 COM Express Basic format) Temperature range (operation) -40 C to +85 C Tcase (VITA 59 cover/frame), compliant with EN 50155:2007, class TX (model 15CB71C00) Temperature range (storage): -40 C to +85 C, compliant with EN 50155:2007 Cooling Concept Conduction-cooled versions according to VITA 59 RCE: Rugged COM Express in process Air-cooled versions according to PICMG COM.0 COM Express standard Humidity: EN 50155:2007 (+25/+55 C, 90-100 %) Altitude: -300 m to +3000 m Shock: EN 61373:2010 Location: Vehicle body (Cat. 1; Class B) Vibration: EN 61373: 2010 Location: Vehicle body (Cat. 1; Class B) Electrical Safety EN 50155:2007 EN 50153:2014 EN 50124-1:2001 + A1:2003 + A2:2005 Fire Protection EN 45545-2, hazard level HL3 EMC behavior depends on the system and housing surrounding the COM Express module. Radiated Emission: EN 50121-3-2:2015 Conducted Emission: EN 50121-3-2:2015 Immunity: EN 50121-3-2:2015 ECE R10 Rev.5 (E-mark) AMI UEFI Firmware Linux Windows (on request) For more information on supported operating system versions and drivers see Software. Technical Data CB71C Data Sheet 2018-02-26 Page 4

Germany MEN Mikro Elektronik GmbH Neuwieder Straße 3-7 90411 Nuremberg Phone +49-911-99 33 5-0 sales@men.de www.men.de France MEN Mikro Elektronik SAS 18, rue René Cassin ZA de la Châtelaine 74240 Gaillard Phone +33-450-955-312 sales@men-france.fr www.men-france.fr USA MEN Micro Inc. 860 Penllyn Blue Bell Pike Blue Bell, PA 19422 Phone 215-542-9575 sales@menmicro.com www.menmicro.com China MEN Mikro Elektronik (Shanghai) Co., Ltd. Room 808-809, Jiaxing Mansion, No. 877 Dongfang Road 200122 Shanghai Phone +86-21-5058-0961 sales@men-china.cn www.men-china.cn Up-to-date information, documentation and ordering information: www.men.de/products/cb71c/ MEN is not responsible for the results of any actions taken on the basis of information in the publication, nor for any error in or omission from the publication. MEN expressly disclaims all and any liability and responsibility to any person, whether a reader of the publication or not, in respect of anything, and of the consequences of anything, done or omitted to be done by any such person in reliance, whether wholly or partially, on the whole or any part of the contents of the publication. The correct function of MEN products in mission-critical and life-critical applications is limited to the environmental specification given for each product in the technical user manual.the correct function of MEN products under extended environmental conditions is limited to the individual requirement specification and subsequent validation documents for each product for the applicable use case and has to be agreed upon in writing by MEN and the customer.should the customer purchase or use MEN products for any unintended or unauthorized application, the customer shall indemnify and hold MEN and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim or personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that MEN was negligent regarding the design or manufacture of the part. In no case is MEN liable for the correct function of the technical installation where MEN products are a part of. 2018 MEN Holding Contact Information CB71C Data Sheet 2018-02-26 Page 5