Electrical Interconnection - PDF Free Download

Electrical Interconnection Edition 208/ Rail-Mount Terminal Block Systems Full Line Catalog, Volume Edition 207/208 PCB Terminal Blocks and Connectors Full Line Catalog, Volume 2 Edition 207/208 2 Automation Technology Full Line Catalog, Volume 3 Edition 207/208 3 Interface Electronic WINSTA The Pluggable Connection System Marking Full Line Catalog, Volume Edition 207/208 Full Line Catalog, Volume 5 Edition 207/208 5 Full Line Catalog, Volume 6 Edition 207/208 6

The new items in this catalog supplement products found in the following main catalogs N /2/5/6 6 Marking Full Line Catalog, Volume 6 Edition 207/208 Volume 5 WINSTA WINSTA The Pluggable Connection System Full Line Catalog, Volume 5 Edition 207/208 5 Volume 2 PCB Terminal Blocks and Connectors Full Line Catalog, Volume 2 Edition 207/208 2 Volume Rail-Mount Terminal Block Systems Full Line Catalog, Volume Edition 207/208

Contents Page Rail-Mount Terminal Block Systems Volume PCB Terminal Blocks and Pluggable Connectors Volume 2 WINSTA The Pluggable Connection System Volume 5 60 Marking Accessories Volume 6 6 Item Number Index 68

Volume, Rail-Mount Terminal Block Systems

www.wago.com Volume, Rail-Mount Terminal Block Systems Contents Accessories, Jumpers Page 282, 2009 Series 202 Series 5 2002 Series 7 X-COM -SYSTEM 2-Conductor/-Pin Double-Deck Carrier Terminal Blocks 2.5 ( f- 870 Series 8 Matrix Patchboards with Push-Buttons, 32-Pole Slimline Version, for 9 Racks 726 Series 9 L-BOXX Splicing Connector Sets 887 Series 0 22 Series 3 Products highlighted in RED are new items for Spring 208 Rail-Mount Terminal Block Systems 3

Volume, Section Rail-Mount Terminal Blocks, TOPJOB S www.wago.com TOPJOB S Jumper and Push-in Type Wire Jumper 2002 Series and 2009 Series Jumper Push-in type wire jumper I N 8 A Conductor cross-section:.5 mm² -3--5 Item No. Jumper; insulated; I N 30 A; orange Pack. Unit 282-35/300-000 50 (5x0) Item No. Pack. Unit Push-in type wire jumper; insulated; conductor cross-section:.5 mm²; L = 0 mm; for 200; 2002; 2003 and 2022 Series Rail-Mount Terminal Blocks red 2009-/000-005 00 (0x0) blue 2009-/000-006 00 (0x0) Rail-Mount Terminal Block Systems

www.wago.com Volume, Section Rail-Mount Terminal Blocks, TOPJOB S TOPJOB S Component Plug on Carrier Terminal Block 2.5 () mm² 202 Series Length of 2002-66: 66.5 mm / 2.62 inch 2-conductor carrier terminal block 2 Length of 2002-76: 76.8 mm / 3.02 inch 3-conductor carrier terminal block 3 Length of 2002-86: 87.5 mm / 3.5 inch -conductor carrier terminal block Length of 2002-96: 72.9 mm / 2.87 inch 2-conductor carrier terminal block with additional jumper slot 5 See application notes in our Full Line Catalog, Volume. Colored push-in type jumper bar Staggered jumper Push-in type wire jumper Pack. Item No. Unit Component plug; -pole; transparent housing; with fiber optics; 0.3 mm wide 202-32 5 Component plug; 8-pole; transparent housing; with fiber optics; 20.7 mm wide 202-3 5 Pack. Item No. Unit Component plug; 6-pole; transparent housing; with fiber optics; 5.5 mm wide 202-33 5 Component plug; 0-pole; transparent housing; with fiber optics; 25.9 mm wide 202-35 5 Accessories for carrier terminal blocks Appropriate marking systems: WMB/Mini-WSB/Marker Strips (see Full Line Catalog, Volume, Section 3) 2-conductor carrier terminal block; 0.25 2.5 () mm² / 22 2 AWG 5.2 mm / 0.205 inch wide gray 2002-66 50 End and intermediate plate; mm thick orange 2002-692 00 (x25) gray 2002-69 00 (x25) 3-conductor carrier terminal block; 2 0.25 2.5 () mm² / 22 2 AWG 5.2 mm / 0.205 inch wide gray 2002-76 50 End and intermediate plate; mm thick orange 2002-792 00 (x25) gray 2002-79 00 (x25) -conductor carrier terminal block; 3 0.25 2.5 () mm² / 22 2 AWG 5.2 mm / 0.205 inch wide gray 2002-86 50 End and intermediate plate; mm thick orange 2002-892 00 (x25) gray 2002-89 00 (x25) 2-conductor carrier terminal block; 0.25 2.5 () mm² / 22 2 AWG 5.2 mm / 0.205 inch wide gray 2002-96 50 End and intermediate plate; mm thick orange 2002-992 00 (x25) gray 2002-99 00 (x25) Protective warning marker; with black high-voltage symbol; for 5 terminal blocks Push-in type wire jumper; insulated; I N 8 A;.5 mm² Staggered jumper; insulated; I N 25 A; light gray 5 conductor cross-section 5 L = 60 mm L = 0 mm L = 250 mm Push-in type jumper bar; insulated; I N 25 A; light gray 5 2-way 2002-02 25 3-way 2002-03 25 -way 2002-0 25 5-way 2002-05 25 6-way 2002-06 25 7-way 2002-07 25 8-way 2002-08 25 9-way 2002-09 25 0-way 2002-0 25 Push-in type jumper bar; insulated; I N 25 A; light gray to 3 to to 5 to 6 to 7 to 8 to 9 to 0 2009-2 2009-2009-6 2002-33 2002-3 2002-35 2002-36 2002-37 2002-38 2002-39 2002-0 00 (0x0) 00 (0x0) 00 (0x0) 25 25 25 25 25 25 25 25 2-way 3-way -way 5-way 6-way 7-way 8-way 9-way 0-way -way 2-way WMB Multi marking system; white; 0 strips with 0 markers/card; stretchable from 5 5.2 mm plain 793-550 WMB Multi marking system; plain; 0 strips with 0 markers/card; stretchable from 5 5.2 mm yellow red blue gray orange light green green violet 2002-72 2002-73 2002-7 2002-75 2002-76 2002-77 2002-78 2002-79 2002-80 2002-8 2002-82 00 00 00 25 25 25 25 25 25 25 25 793-550/000-002 793-550/000-005 793-550/000-006 793-550/000-007 793-550/000-02 793-550/000-07 793-550/000-023 793-550/000-02 5 5 yellow 2002-5 00 (x25) Rail-Mount Terminal Block Systems 5

Volume, Section 3 Installation Rail-Mount Terminal Blocks, TOPJOB S www.wago.com TOPJOB S Multilevel Installation Terminal Block 2.5 () mm²; 2003 Series 0.25 2.5 () mm² 22 2 AWG 250 V/ kv/3; 0 A 23 00 V/6 kv/3; 0 A 2 Terminal block width: 5.2 mm / 0.205 inch L 0 2 mm / 0.39 0.7 inch 3 56,7 mm/2.32 in 0 mm/.33 in,3 mm/.7 in Conductor range: 0.25 mm² s + f-st ; Push-in termination: 0.75 mm² s and 0.75 2.5 mm² insulated ferrules, 2 mm 2 250 V/ 00 V = rated voltage kv/ 6 kv = rated surge voltage 3 = pollution degree (see Full Line Catalog, Volume, Section ) 3 250 V/ kv potential ground 00 V/6 kv potential potential Pack. Item No. Unit Multilevel installation terminal block; carrier terminal block without knife disconnect; blue middle-deck, green-yellow lower-deck printing; gray Maximum current depends on accessories used. L/N/PE 2003-666 50 Item-Specific Accessories N/L-test plug adapter; for vertical test slot; gray 2-pole 2003-99 00 (x25) N-test plug adapter; for vertical test slot; gray -pole 2003-500 00 (x25) End and intermediate plate; for use without fuse plug; 0.8 mm thick orange 2003-6692 00 (x25) Fuse plug with pull-tab; for (5 x 20) mm miniature metric fuses Electrical ratings are given by the fuse. gray 200-9 50 End and intermediate plate; only for use with fuse plugs; mm thick orange 2003-6693 00 (x25) Double-fuse plug; for (5 x 20) mm miniature metric fuses Electrical ratings are given by the fuse. gray 2003-9 25 Double-fuse plug; for (5 x 20) mm miniature metric fuse; with LED; gray Electrical ratings are given by the fuse and blown fuse indication. Leakage current in case of a blown fuse: LED 0.25 ma gray 2003-9/000-923 25 End and intermediate plate; mm thick; only for use with double-fuse plugs orange 2003-669 00 (x25) 6 Rail-Mount Terminal Block Systems

www.wago.com Rail-Mount Terminal Block Systems 7

Volume, Section 6 Rail-Mount Terminal Blocks with a Pluggable Connector, X-COM -SYSTEM, Classic www.wago.com X-COM -SYSTEM 2-Conducto/-Pin Double-Deck Carrier Terminal Block 2.5 ( f-st ) mm²; 870 Series 0.08 2.5 ( f-st ) mm² 28 2 AWG 500 V/6 kv/3 2 I N 6 A Terminal block width: 5 mm / 0.97 inch L 6 7 mm / 0.2 0.28 inch 0.08 2.5 ( f-st ) mm² 28 2 AWG Terminal block width: 5 mm / 0.97 inch L 6 7 mm / 0.2 0.28 inch 52,3 mm/2.06 in 9 mm/3.58 in 39,8 mm/.57 in 52,3 mm/2.06 in 9 mm/3.58 in 39,8 mm/.57 in Max. insulation diameter:. mm 2 500 V = Rated voltage 6 kv = Rated surge voltage 3 = Pollution degree (see Full Line Catalog, Volume, Section ) 3 See application notes in our Full Line Catalog, Volume. Insulation stop Note: 2-conductor female plugs cannot be used. 6 Pack. Item No. Unit 2-conductor/-pin double-deck carrier terminal block; through/through terminal block; gray housing L/L 870-3 50 -conductor/2-pin double-deck carrier terminal block; -conductor/2-pin through terminal block; internally commoned; violet conductor entry; gray housing Pack. Item No. Unit -conductor/2-pin double-deck carrier block; -conductor/2-pin ground conductor block; internally commoned; green-yellow housing PE 870-37 50 Accessories Appropriate marking systems: Mini-WSB/WMB Push-in type jumper bar; insulated; I N 8 A; light gray -3-5 -3-5-7-3-5-7-9 870-05/0-000 870-07/0-000 200 (8x25) 870-09/0-000 00 (x25) L 870-38 50 Delta jumper; insulated; I N 8 A; light gray Accessories End and intermediate plate; mm thick orange 870-9 gray 870-8 Insulation stop; 5 pcs/strip; 0.08 0.2 mm² s 3 (0. mm² f-st ) white 280-70 Insulation stop; 5 pcs/strip; 0.25 0.5 mm² 3 light gray 280-7 Insulation stop; 5 pcs/strip; 0.75 mm² 3 dark gray 280-72 Coding pin; for coding female plugs orange Pin cover; with Mini-WSB marker slot 769-35 gray 769-38 orange 769-39 -conductor female plug; angled Appropriate marking systems: Mini-WSB/WMB 00 (x25) 00 (x25) 200 (8x25) 200 (8x25) 200 (8x25) 00 (x25) 00 (x25) 00 (x25) Push-in type jumper bar; insulated; I N 8 A; light gray 2-way 3-way -way 5-way 6-way 7-way 8-way 9-way 0-way Push-in type jumper bar; insulated; I N 8 A; light gray to 3 to to 5 to 6 to 7 to 8 to 9 to 0 870-02 870-03 870-0 870-05 870-06 870-07 870-08 870-09 870-0 200 (8x25) 200 (8x25) 00 (x25) 00 (x25) 00 (x25) 00 (x25) 00 (x25) 00 (x25) 50 (2x25) 870-33 200 (8x25) 870-3 200 (8x25) 870-35 00 (x25) 870-36 00 (x25) 870-37 00 (x25) 870-38 00 (x25) 870-39 00 (x25) 870-0 50 (2x25) -2 3-5-6 870-06/020-000 00 (x25) gray 769-0/022-000 -connector female plug; straight gray 769-0 200 200 8 Rail-Mount Terminal Block Systems

www.wago.com Volume, Section Matrix Patchboards Matrix Patchboard with Push-Buttons; 32-Pole Slimline Version; for 9 Racks 726 Series Side : 32 x 0.08.5 mm² 28 6 AWG Side : 32 x 0.08.5 mm² 28 6 AWG Side 2: 32 x 0.08.5 mm² 28 6 AWG Side 2: 32 x 0.08.5 mm² 28 6 AWG 800 V/8 kv/3 800 V/8 kv/3 I N 0 A I N 0 A L 0 mm / 0.39 inch L 0 mm / 0.39 inch 500 V = Rated voltage 8 kv = Rated surge voltage 3 = Pollution degree (see Full Line Catalog, Volume, Section ) 2 See application notes in our Full Line Catalog, Volume. Decade marker carrier Item No. Pack. Pack. Item No. Unit Unit Matrix patchboard; dark gray frame; blue modules; for Matrix patchboard; dark gray frame; blue modules; for 9 racks 9 racks without marking 726-800 30 Marking 32 726-80 30 Matrix patchboard; dark gray frame; white/gray modules; vertical module marking on sides and 2; for 9 racks without marking 726-780 30 Matrix Patchboard Accessories Wire commoning chain; insulated; 32 connections; I N 6 A; max. 50 V; 0.5 mm² gray 709-07 WMB Inline; plain; stretchable from 5 5.2 mm;,500 WMB markers (5 mm) per reel white 2009-5 Marking strip; plain; mm wide; 50 m reel Patching side 33, Field side 2,9 5 Patching side 33, Field side 2,9 5 white 2009-0 WMB Multi marking system; white; 0 strips with 0 markers/card; stretchable from 5 5.2 mm plain 793-550 WMB Multi marking system; plain; 0 strips with 0 markers/card; stretchable from 5 5.2 mm yellow 793-550/000-002 red 793-550/000-005 blue 793-550/000-006 gray 793-550/000-007 orange 793-550/000-02 light green 793-550/000-07 green 793-550/000-023 violet 793-550/000-02 Decade marker carrier; for matrix patchboards 2 dark gray 726-905 5 5 0 9,5 9,5 2 3 9 0 7 8 9 25 26 27 25 26 27 7 8 9 9 0 2 3 Operating tool with a partially insulated shaft; type ; (2.5 x 0.) mm blade 20-79 3,9 0 2 5 2 3 20 2 28 29 3,9 0 2 28 29 20 2 2 3 5 Test probe; 2 mm Ø; min. 2 mm lon; uninsulated tip; not offered by WAGO (e.g., MultiContact XPP-80/2-6) 6 22 30 30 22 6 7 5 23 3 3 23 5 7 8 6 2 32 32 2 6 8 9,5,5 5 9,7 9,5,5 5 9,7 29,9 3,6 29,9 3,6 Dimensions (in mm): Dimensions (in mm): Rail-Mount Terminal Block Systems 9

Volume, Section 2 Splicing Connectors www.wago.com Splicing Connector Set 887 Series Splicing Connector Set Splicing Connector Set Splicing Connector Set Pack. Item No. Unit Splicing connector set; L-BOXX 02; 22, 2273 Series Item No. Splicing connector set; L-BOXX 02; 22 Series Pack. Unit Item No. Splicing connector set; L-BOXX Mini; 22 Series Pack. Unit 887-97 887-98 887-952 Contains: COMPACT PUSH WIRE Connectors for Junction Boxes white 2 x 0.5 2.5 mm² 2273-202 00 orange 3 x 0.5 2.5 mm² 2273-203 00 red x 0.5 2.5 mm² 2273-20 00 yellow 5 x 0.5 2.5 mm² 2273-205 00 light gray 8 x 0.5 2.5 mm² 2273-208 50 COMPACT Splicing Connectors transparent 2 x 0. mm² 22-2 00 transparent 3 x 0. mm² 22-3 00 transparent 5 x 0. mm² 22-5 5 Mounting carrier orange 2273-500 2 Contains: COMPACT Splicing Connectors 2 x 0. mm² 22-2 00 3 x 0. mm² 22-3 250 5 x 0. mm² 22-5 250 Mounting carrier orange 22-500 0 Contains: COMPACT Splicing Connectors 2 x 0. mm² 22-2 00 3 x 0. mm² 22-3 00 5 x 0. mm² 22-5 25 Mounting carrier orange 22-500 Mounting carrier orange 22-500 2 2 0 Rail-Mount Terminal Block Systems

www.wago.com Volume, Section 2 Splicing Connectors Splicing Connector Set 887 Series Splicing Connector Set Splicing Connector Set Splicing Connector Set Item No. Pack. Pack. Pack. Item No. Item No. Unit Unit Unit Splicing connector set; L-BOXX Mini; 2273 Series Splicing connector set; L-BOXX Mini; 22, 2273, 773, 22, 23 Series Splicing connector set; L-BOXX Mini; 22, 2273 Series 887-953 887-950 887-955 Contains: COMPACT PUSH WIRE Connectors for Junction Boxes white 2 x 0.5 2.5 mm² 2273-202 00 orange 3 x 0.5 2.5 mm² 2273-203 00 red x 0.5 2.5 mm² 2273-20 00 yellow 5 x 0.5 2.5 mm² 2273-205 75 light gray 8 x 0.5 2.5 mm² 2273-208 25 Mounting carrier orange 2273-500 Contains: COMPACT PUSH WIRE Connectors for Junction Boxes orange 3 x 0.5 2.5 mm² 2273-203 20 yellow 5 x 0.5 2.5 mm² 2273-205 20 light gray 8 x 0.5 2.5 mm² 2273-208 5 COMPACT Splicing Connectors transparent 2 x 0. mm² 22-2 6 transparent 3 x 0. mm² 22-3 2 transparent 5 x 0. mm² 22-5 8 Lighting Connectors white 2 x 2.5 mm² s 22-2 0 PUSH WIRE Connectors for Junction Boxes red 2.5 6 mm² s+str 773-73 5 MICRO PUSH WIRE Connectors for Junction Boxes dark gray x 0.6 0.8 mm Ø 23-20 30 dark gray 8 x 0.6 0.8 mm Ø 23-208 30 Contains: COMPACT PUSH WIRE Connectors for Junction Boxes orange 3 x 0.5 2.5 mm² 2273-203 00 yellow 5 x 0.5 2.5 mm² 2273-205 75 light gray 8 x 0.5 2.5 mm² 2273-208 25 COMPACT Splicing Connectors transparent 2 x 0. mm² 22-2 75 transparent 3 x 0. mm² 22-3 50 transparent 5 x 0. mm² 22-5 25 Mounting carrier orange 2273-500 Mounting carrier orange 22-500 2 Rail-Mount Terminal Block Systems

Volume, Section 2 Splicing Connectors www.wago.com COMPACT Splicing Connectors for All Conductor Types 22 Series Description and Installation Strip conductor to mm (0.3 inch). Termination: Lift the lever to open the clamping unit and insert a stripped conductor. Then, lower the lever to close the clamp. Wiring fine-stranded conductors in a junction box. Custom low-voltage lighting systems 2 Wiring fine-stranded conductors in a junction box. Lighting distribution in ceiling canopy Pendant light connection in suspended ceilings CAGE CLAMP terminates the following copper conductors: solid stranded fine-stranded, also with tinned single strands fine-stranded, tip-bonded 2 Rail-Mount Terminal Block Systems

www.wago.com Volume, Section 2 Splicing Connectors COMPACT Splicing Connectors for All Conductor Types 6 mm²; 22 Series 0.5 6 mm² 20 0 AWG 0.5 6 mm² 20 0 AWG 50 V/ kv/2 50 V/ kv/2 I N A I N A L 2 mm / 0.7 0.55 inch L 2 mm / 0.7 0.55 inch In grounded power lines 50 V = Rated voltage kv = Rated surge voltage 2 = Pollution degree (see Full Line Catalog, Volume, Section ) Pack. Item No. Unit COMPACT PUSH WIRE connector for junction boxes; 2-wire connector; with levers; continuous operating temperature (max.): 05 C; ambient temperature (max.): 85 C (T85) 22-62 500 (0x50) Pack. Item No. Unit COMPACT PUSH WIRE connector for junction boxes; 3-wire connector; with levers; continuous operating temperature (max.): 05 C; ambient temperature (max.): 85 C (T85) 22-63 300 (0x30) 6 2 0, 0, 0, Dimensions in mm 2, Dimensions in mm 2, 22,9 Compact, lever-operated splicing connectors: They connect up to five stripped conductors from 0.5 to 6 mm² (20 0 AWG) without tools! How these work: Pull up one of the orange operating levers to open the clamping unit. Then insert the conductor and push the lever back down, flush with the connector housing. 28,3 mm/. in Safety: The specially designed rest position of the lever reliably prevents accidental unclamping of a connected conductor. Application safety, for any type of conductor (solid, stranded, fine-stranded), is confirmed by approvals like ENEC or UL. 8,2 mm/3.7 in Item No. Pack. Pack. Item No. Unit Unit Mounting carrier; for 2-, 3- and 5-conductor splicing connectors; 9.3 mm wide; 28.3 mm high; 9.2 mm deep COMPACT PUSH WIRE connector for junction boxes; 5-wire connector; with levers; continuous operating temperature (max.): 05 C; ambient temperature (max.): 85 C (T85) orange 22-50 50 (5x0) 22-65 50 (0x5) ENEC is the European mark for electrical products that demonstrates compliance with European safety standards. The ENEC mark is subjected to the same EN standards as the VDE mark. While the VDE mark is only permitted in Germany, the ENEC mark is accepted in more than 20 European countries. Accessories; item-specific Self-adhesive marking strips; 5 mm high; 8 self-adhesive strips per card; plain white 20-33 00 2, 36,7 Dimensions in mm Rail-Mount Terminal Block Systems 3

Volume 2, PCB Terminal Blocks and Connectors

www.wago.com Volume 2, PCB Terminal Blocks and Connectors Contents Nominal Cross-Section Series Page PCB Terminal Blocks with Levers; Push-in CAGE CLAMP PCB Terminal Blocks with Screwdriver Actuation; Push-in CAGE CLAMP Through-Board SMD PCB Terminal Blocks; Push-in CAGE CLAMP SMD PCB Terminal Blocks; Push-in CAGE CLAMP ; PUSH WIRE Board-to-Board Links for SMD PCB Terminal Blocks 2059 8 206 50 MCS MULTI CONNECTION SYSTEM MAXI 6 Female Connectors; Push-in CAGE CLAMP MCS MULTI CONNECTION SYSTEM MAXI 6 THT Male Headers 832 5 MCS MULTI CONNECTION SYSTEM MAXI 6 Male Connectors; Push-in CAGE CLAMP MCS MULTI CONNECTION SYSTEM MAXI 6 Snap-In Frames 83 58 Lockout Pins for Snap-In Frames 83 59 PCB Terminal Blocks and Connectors 5

Volume 2, Section PCB Terminal Blocks www.wago.com PCB Terminal Block with Levers; mm² Pin Spacing: 5 mm; 7.5 mm;.5 mm 260 Series PCB terminal block with lever-actuated Push-in CAGE CLAMP connection Push-in termination of solid and ferruled conductors Intuitive and tool-free operation Several clamping units can be held open simultaneously convenient for terminating multi-core cables Testing can be performed both parallel and perpendicular to conductor entry Current-Carrying Capacity Curve Pin spacing: 5 mm / Conductor cross-section: mm² "f-st" Based on: EN 6052-5-2 / Reduction factor: Current in A 0 30 Electrical Data for Pin Spacing 5 mm 0.97 inch 7.5 mm 0.295 inch.5 mm 0.53 inch Ratings per* IEC/EN 6066- IEC/EN 6066- IEC/EN 6066- Nominal voltage (III / 3) 320 V 630 V 000 V Rated impulse voltage (III / 3) kv 6 kv 8 kv Rated voltage (III / 2) 00 V 630 V 000 V Rated surge voltage (III / 2) kv 6 kv 8 kv Rated voltage (II / 2) 630 V 000 V 000 V Rated surge voltage (II / 2) kv 6 kv 8 kv Rated current 32 A 32 A 32 A 20 0 0 0 20 30 0 50 60 70 80 90 00 05 Ambient operating temperature in C 2-, -, 6-, 2- pole Conductor rated current Approvals per UL 059 UL 059 UL 059 Rated voltage UL (Use Group B) 300 V 300 V 600 V Rated current UL (Use Group B) 20 A 20 A 20 A Rated voltage UL (Use Group C) 300 V 600 V Rated current UL (Use Group C) 20 A 20 A Rated voltage UL (Use Group D) 300 V 600 V Rated current UL (Use Group D) 0 A 5 A Connection Data Connection technology Push-in CAGE CLAMP Strip length 9 mm / 0.35 0.3 inch Conductor entry angle to the PCB 0 Conductor cross-sections Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Solder Pin Data Solder pin length Solder pin dimensions Drilled hole diameter mm 0.8 x mm.3 +0. mm Pollution degree 2 Material Data Material group I Insulation material Polyamide 66 (PA 66) Flammability class per UL9 V0 Limit temperature range +05 C Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Tin-plated Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 6 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section PCB Terminal Blocks PCB Terminal Block with Levers; mm² Pin Spacing: 5 mm; 7.5 mm;.5 mm 260 Series Dimensions (in mm): Dimensions (in mm): Dimensions (in mm): 0,9 0,9 0,9,5 7,5 3,8 L 2,7 Ø,3 8,2 2,9 25,7 6,7 25,7 6,7 8,2 6,3 9,2 0,8 5,2,5,5 3,8 L 2,7 8,2 6,3 9,2 0,8 5,2 Ø,3 8,2 2,9 25,7 6,7,5 5 3,8 L 2,7 8,2 6,3 9,2 0,8 5,2 Ø,3 8,2 2,9 5 5,5 PCB terminal block with levers; conductor entry parallel to PCB; 2 solder pins/pole; gray; 5 mm (0.97 inch) pin spacing PCB terminal block with levers; conductor entry parallel to PCB; 2 solder pins/pole; gray; 7.5 mm (0.295 inch) pin spacing PCB terminal block with levers; conductor entry parallel to PCB; 2 solder pins/pole; gray;.5 mm (0.53 inch) pin spacing Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 260-0 300 260-302 50 260-502 20 260-02 200 260-303 00 260-503 70 260-03 30 260-30 70 260-50 50 260-0 00 260-305 60 260-505 0 260-05 80 260-306 5 260-506 30 260-06 60 260-307 0 260-507 25 260-07 60 260-308 35 260-508 25 260-08 50 260-309 30 260-509 25 260-09 0 0 260-30 25 0 260-50 20 0 260-0 0 260-3 25 260-5 20 260-30 2 260-32 25 2 260-52 5 2 260-2 30 Available upon request (depending on quantity required): Other pole numbers Other colors Direct marking PCB Terminal Blocks and Connectors 7

Volume 2, Section PCB Terminal Blocks www.wago.com PCB Terminal Block with Levers; mm² Pin Spacing: 5 mm; 7.5 mm;.5 mm 260 Series PCB terminal block with lever-actuated Push-in CAGE CLAMP connection Push-in termination of solid and ferruled conductors Intuitive and tool-free operation Several clamping units can be held open simultaneously convenient for terminating multi-core cables Testing can be performed both parallel and perpendicular to conductor entry Current-Carrying Capacity Curve Pin spacing: 5 mm / Conductor cross-section: mm² "f-st" Based on: EN 6052-5-2 / Reduction factor: Current in A 0 30 Electrical Data for Pin Spacing 5 mm 0.97 inch 7.5 mm 0.295 inch.5 mm 0.53 inch Ratings per* IEC/EN 6066- IEC/EN 6066- IEC/EN 6066- Nominal voltage (III / 3) 320 V 630 V 000 V Rated impulse voltage (III / 3) kv 6 kv 8 kv Rated voltage (III / 2) 00 V 630 V 000 V Rated surge voltage (III / 2) kv 6 kv 8 kv Rated voltage (II / 2) 630 V 000 V 000 V Rated surge voltage (II / 2) kv 6 kv 8 kv Rated current 32 A 32 A 32 A 20 0 0 0 20 30 0 50 60 70 80 90 00 05 Ambient operating temperature in C 2-, -, 6-, 2- pole Conductor rated current Approvals per UL 059 UL 059 UL 059 Rated voltage UL (Use Group B) 300 V 300 V 600 V Rated current UL (Use Group B) 20 A 20 A 20 A Rated voltage UL (Use Group C) 300 V 600 V Rated current UL (Use Group C) 20 A 20 A Rated voltage UL (Use Group D) 300 V 600 V Rated current UL (Use Group D) 0 A 5 A Connection Data Connection technology Push-in CAGE CLAMP Strip length 9 mm / 0.35 0.3 inch Conductor entry angle to the PCB 90 Conductor cross-sections Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Solder Pin Data Solder pin length Solder pin dimensions Drilled hole diameter mm 0.8 x mm.3 +0. mm Pollution degree 2 Material Data Material group I Insulation material Polyamide 66 (PA 66) Flammability class per UL9 V0 Limit temperature range +05 C Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Tin-plated Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 8 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section PCB Terminal Blocks PCB Terminal Block with Levers; mm² Pin Spacing: 5 mm; 7.5 mm;.5 mm 260 Series Dimensions (in mm): Dimensions (in mm): Dimensions (in mm): 0,9 0,9 0,9 5 L 2,7,5 3,8 0,8 8,2 6,7 25,8 8, 2,3 3,6,5 7,5 3,8 L 2,7 0,8 8,2 6,7 25,8 8, 2,3 3,6,5,5 3,8 L 2,7 0,8 8,2 6,7 25,8 8, 2,3 3,6 8,2,9 Ø,3 8,2,9 5 7,5,5 Ø,3 8,2,9 Ø,3 PCB terminal block with levers; conductor entry perpendicular to PCB; 2 solder pins/pole; gray; 5 mm (0.97 inch) pin spacing PCB terminal block with levers; conductor entry perpendicular to PCB; 2 solder pins/pole; gray; 7.5 mm (0.295 inch) pin spacing PCB terminal block with levers; conductor entry perpendicular to PCB; 2 solder pins/pole; gray;.5 mm (0.53 inch) pin spacing Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 260-30 250 260-3302 50 260-3502 20 260-302 80 260-3303 00 260-3503 70 260-303 20 260-330 70 260-350 50 260-30 90 260-3305 50 260-3505 0 260-305 70 260-3306 5 260-3506 30 260-306 50 260-3307 0 260-3507 25 260-307 50 260-3308 30 260-3508 25 260-308 0 260-3309 30 260-3509 25 260-309 0 0 260-330 25 0 260-350 20 0 260-30 30 260-33 25 260-35 20 260-3 30 2 260-332 25 2 260-352 5 2 260-32 30 Available upon request (depending on quantity required): Other pole numbers Other colors Direct marking PCB Terminal Blocks and Connectors 9

Volume 2, Section PCB Terminal Blocks www.wago.com PCB Terminal Block with Levers; 6 mm² Pin Spacing: 7.5 mm 2606 Series PCB terminal block with lever-actuated Push-in CAGE CLAMP connection Push-in termination of solid and ferruled conductors Intuitive and tool-free operation Several clamping units can be held open simultaneously convenient for terminating multi-core cables Testing can be performed both parallel and perpendicular to conductor entry 80 60 0 20 Current-Carrying Capacity Curve Pin spacing: 7,5 mm / Conductor cross-section: 6 mm 2 "f-st" Based on: EN 6052-5-2 / Reduction factor: Current in A 0 0 20 30 0 50 60 70 80 90 0005 2-, -, 6-, 2- pole Ambient operating temperature in C Conductor rated current Electrical Data Ratings per* IEC/EN 6066- Nominal voltage (III / 3) 800 V Rated impulse voltage (III / 3) 8 kv Rated voltage (III / 2) 000 V Rated surge voltage (III / 2) 8 kv Rated voltage (II / 2) 000 V Rated surge voltage (II / 2) 8 kv Rated current A Approvals per UL 059 Rated voltage UL (Use Group B) 600 V Rated current UL (Use Group B) 3 A Rated voltage UL (Use Group C) 600 V Rated current UL (Use Group C) 3 A Connection Data Connection technology Push-in CAGE CLAMP Strip length 3 mm / 0.3 0.5 inch Conductor entry angle to the PCB 0 Conductor cross-sections Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Solder Pin Data Solder pin length Solder pin dimensions Drilled hole diameter mm.5 x.2 mm 2 +0. mm Material Data Material group I Insulation material Polyamide 66 (PA 66) Flammability class per UL9 V0 Limit temperature range +05 C Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Tin-plated Pollution degree 2 UL/CSA approval pending Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 20 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section PCB Terminal Blocks PCB Terminal Block with Levers; 6 mm² Pin Spacing: 7.5 mm 2606 Series Dimensions (in mm): Dimensions (in mm):,,5,,5,5 7,5 L 5,5 7,5 2 Ø 2 (3,5) 2,5 2 2 36,7 36,7,5 L Ø 2 (3,5),2 2,5 2 2,3,2 2,5 2 2,3 2,5 PCB terminal block with lever; conductor entry parallel to PCB; 2 solder pins/pole; gray; 7.5 mm (0.295 inch) pin spacing PCB terminal block with levers; conductor entry parallel to PCB; staggered solder pin/pole; gray; 7.5 mm (0.295 inch) pin spacing Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 2606-0 200 2606-02/020-000 20 2606-03/020-000 80 2606-0/020-000 60 2606-05/020-000 50 2606-06/020-000 0 2606-07/020-000 35 2606-08/020-000 30 2606-09/020-000 25 0 2606-0/020-000 25 2606-/020-000 25 2 2606-2/020-000 25 Available upon request (depending on quantity required): Other pole numbers Other colors Other pin spacing Direct marking PCB Terminal Blocks and Connectors 2

Volume 2, Section PCB Terminal Blocks www.wago.com PCB Terminal Block with Levers; 6 mm² Pin Spacing: 7.5 mm 2606 Series PCB terminal block with lever-actuated Push-in CAGE CLAMP connection Push-in termination of solid and ferruled conductors Intuitive and tool-free operation Several clamping units can be held open simultaneously convenient for terminating multi-core cables Testing can be performed both parallel and perpendicular to conductor entry 80 60 0 20 Current-Carrying Capacity Curve Pin spacing: 7,5 mm / Conductor cross-section: 6 mm 2 "f-st" Based on: EN 6052-5-2 / Reduction factor: Current in A 0 0 20 30 0 50 60 70 80 90 00 05 Electrical Data Ratings per* IEC/EN 6066- Nominal voltage (III / 3) 800 V Rated impulse voltage (III / 3) 8 kv Rated voltage (III / 2) 000 V Rated surge voltage (III / 2) 8 kv Rated voltage (II / 2) 000 V Rated surge voltage (II / 2) 8 kv Rated current A Approvals per UL 059 Rated voltage UL (Use Group B) 600 V Rated current UL (Use Group B) 3 A Rated voltage UL (Use Group C) 600 V Rated current UL (Use Group C) 3 A 2-, -, 6-, 2- pole Ambient operating temperature in C Conductor rated current Connection Data Connection technology Push-in CAGE CLAMP Strip length 3 mm / 0.3 0.5 inch Conductor entry angle to the PCB 90 Conductor cross-sections Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Solder Pin Data Solder pin length Solder pin dimensions Drilled hole diameter mm.5 x.2 mm 2 +0. mm Material Data Material group I Insulation material Polyamide 66 (PA 66) Flammability class per UL9 V0 Limit temperature range +05 C Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Tin-plated Pollution degree 2 UL/CSA approval pending Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 22 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section PCB Terminal Blocks PCB Terminal Block with Levers; 6 mm² Pin Spacing: 7.5 mm 2606 Series Dimensions (in mm):,,5 Dimensions (in mm):,,5 27 23,7 27 23,7,5 L,2 3,8 (3,5) 2,5 2 Ø 2 36,7,5 (3,5) 7,5 L 5,5 7,5 Ø 2,2 2,5 2 36,7 3,8 2,5 7,7 2,5 Insert solid conductors via push-in termination. all conductors via operating lever. PCB terminal block with lever; conductor entry perpendicular to PCB; 2 solder pins/pole; gray; 7.5 mm (0.295 inch) pin spacing PCB terminal block with levers; conductor entry perpendicular to PCB; staggered solder pin/pole; gray; 7.5 mm (0.295 inch) pin spacing Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 2606-30 200 2606-302/020-000 20 2606-303/020-000 80 2606-30/020-000 60 2606-305/020-000 50 2606-306/020-000 0 2606-307/020-000 35 2606-308/000-000 30 2606-309/020-000 25 0 2606-30/020-000 25 2606-3/020-000 25 2 2606-32/020-000 25 Available upon request (depending on quantity required): Other pole numbers Other colors Other pin spacing Direct marking PCB Terminal Blocks and Connectors 23

Volume 2, Section PCB Terminal Blocks www.wago.com PCB Terminal Block with Levers; 6 mm² Pin Spacing: 0 mm 266 Series PCB terminal block with lever-actuated Push-in CAGE CLAMP connection Push-in termination of solid and ferruled conductors Intuitive and tool-free operation Several clamping units can be held open simultaneously convenient for terminating multi-core cables Testing can be performed both parallel and perpendicular to conductor entry 0 00 80 0 Current-Carrying Capacity Curve Pin spacing: 0 mm / Conductor cross-section: 6 mm 2 "f-st" Based on: EN 6052-5-2 / Reduction factor: Current in A 0 0 20 30 0 50 60 70 80 90 00 05 2-, -, 6-, 2- pole Ambient operating temperature in C Conductor rated current Electrical Data Ratings per* IEC/EN 6066- Nominal voltage (III / 3) 000 V Rated impulse voltage (III / 3) 8 kv Rated voltage (III / 2) 000 V Rated surge voltage (III / 2) 8 kv Rated voltage (II / 2) 000 V Rated surge voltage (II / 2) 8 kv Rated current 76 A Approvals per UL 059 Rated voltage UL (Use Group B) 600 V Rated current UL (Use Group B) 66 A Rated voltage UL (Use Group C) 600 V Rated current UL (Use Group C) 66 A Connection Data Connection technology Push-in CAGE CLAMP Strip length 8 20 mm / 0.7 0.79 inch Conductor entry angle to the PCB 0 Conductor cross-sections Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Solder Pin Data Solder pin length Solder pin dimensions Drilled hole diameter mm.2 x.2 mm.7 +0. mm Material Data Material group I Insulation material Polyamide 66 (PA 66) Flammability class per UL9 V0 Limit temperature range +05 C Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Tin-plated Pollution degree 2 UL/CSA approval pending Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 2 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section PCB Terminal Blocks PCB Terminal Block with Levers; 6 mm² Pin Spacing: 0 mm 266 Series Dimensions (in mm):,3,5 Dimensions (in mm):,3,5,2 2,5 5 L 2, Ø,7,2 5 0,2 27,8 32 5 33,2 9,8,2 2,5 0 5 L, 2, Ø,7,2 5 0,2 27,8 32 5 2,6 33,2 9,8 PCB terminal block with lever; conductor entry parallel to PCB; 6 solder pins/pole; gray; 0 mm (0.39 inch) pin spacing 0 5 2,5 PCB terminal block with levers; conductor entry parallel to PCB; 3 staggered solder pins/pole; gray; 0 mm (0.39 inch) pin spacing Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 266-0 00 266-02/020-000 50 266-03/020-000 0 266-0/020-000 25 266-05/020-000 25 266-06/020-000 20 266-07/020-000 20 266-08/020-000 5 266-09/020-000 5 0 266-0/020-000 5 266-/020-000 0 2 266-2/020-000 0 Available upon request (depending on quantity required): Other pole numbers Other colors Other pin spacing Direct marking PCB Terminal Blocks and Connectors 25

Volume 2, Section PCB Terminal Blocks www.wago.com PCB Terminal Block with Levers; 6 mm² Pin Spacing: 0 mm 266 Series PCB terminal block with lever-actuated Push-in CAGE CLAMP connection Push-in termination of solid and ferruled conductors Intuitive and tool-free operation Several clamping units can be held open simultaneously convenient for terminating multi-core cables Testing can be performed both parallel and perpendicular to conductor entry 0 00 Current-Carrying Capacity Curve Pin spacing: 0 mm / Conductor cross-section: 6 mm 2 "f-st" Based on: EN 6052-5-2 / Reduction factor: Current in A 80 0 0 0 20 30 0 50 60 70 80 90 0005 2-, -, 6-, 2- pole Ambient operating temperature in C Conductor rated current Electrical Data Ratings per* IEC/EN 6066- Nominal voltage (III / 3) 000 V Rated impulse voltage (III / 3) 8 kv Rated voltage (III / 2) 000 V Rated surge voltage (III / 2) 8 kv Rated voltage (II / 2) 000 V Rated surge voltage (II / 2) 8 kv Rated current 76 A Approvals per UL 059 Rated voltage UL (Use Group B) 600 V Rated current UL (Use Group B) 66 A Rated voltage UL (Use Group C) 600 V Rated current UL (Use Group C) 66 A Connection Data Connection technology Push-in CAGE CLAMP Strip length 8 20 mm / 0.7 0.79 inch Conductor entry angle to the PCB 90 Conductor cross-sections Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Solder Pin Data Solder pin length Solder pin dimensions Drilled hole diameter mm.2 x.2 mm.7 +0. mm Material Data Material group I Insulation material Polyamide 66 (PA 66) Flammability class per UL9 V0 Limit temperature range +05 C Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Tin-plated Pollution degree 2 UL/CSA approval pending Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 26 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section PCB Terminal Blocks PCB Terminal Block with Levers; 6 mm² Pin Spacing: 0 mm 266 Series Dimensions (in mm): Dimensions (in mm):,3,5,3,5 30 3,2 30 3,2,2 L 5 2,5 2, Ø,7,2 5 29, 6,2 2,5,2 0 5 2, 5 L 29, 6 5 5 2,5 Ø,7 0 5 Insert solid conductors via push-in termination. all conductors via operating lever. PCB terminal block with lever; conductor entry perpendicular to PCB; 6 solder pins/pole; gray; 0 mm (0.39 inch) pin spacing PCB terminal block with levers; conductor entry perpendicular to PCB; 3 staggered solder pins/pole; gray; 0 mm (0.39 inch) pin spacing Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 266-30 00 266-302/020-000 50 266-303/020-000 0 266-30/020-000 25 266-305/020-000 25 266-306/020-000 20 266-307/020-000 20 266-308/020-000 5 266-309/020-000 5 0 266-30/020-000 5 266-3/020-000 0 2 266-32/020-000 0 Available upon request (depending on quantity required): Other pole numbers Other colors Other pin spacing Direct marking PCB Terminal Blocks and Connectors 27

Volume 2, Section PCB Terminal Blocks www.wago.com PCB Terminal Block; mm² Pin Spacing: 5 mm; 7.5 mm;.5 mm 262 Series PCB terminal block with Push-in CAGE CLAMP connection Push-in termination of solid and ferruled conductors Ideal for panel feedthrough applications via operation parallel to conductor entry Testing can be performed both parallel and perpendicular to conductor entry Current-Carrying Capacity Curve Pin spacing: 5 mm / Conductor cross-section: mm² "f-st" Based on: EN 6052-5-2 / Reduction factor: Current in A 0 30 Electrical Data for Pin Spacing 5 mm 0.97 inch 7.5 mm 0.295 inch.5 mm 0.53 inch Ratings per* IEC/EN 6066- IEC/EN 6066- IEC/EN 6066- Nominal voltage (III / 3) 320 V 630 V 000 V Rated impulse voltage (III / 3) kv 6 kv 8 kv Rated voltage (III / 2) 00 V 630 V 000 V Rated surge voltage (III / 2) kv 6 kv 8 kv Rated voltage (II / 2) 630 V 000 V 000 V Rated surge voltage (II / 2) kv 6 kv 8 kv Rated current 32 A 32 A 32 A 20 0 0 0 20 30 0 50 60 70 80 90 00 05 Ambient operating temperature in C 2-, -, 6-, 2- pole Conductor rated current Approvals per UL 059 UL 059 UL 059 Rated voltage UL (Use Group B) 300 V 300 V 600 V Rated current UL (Use Group B) 26 A 26 A 26 A Rated voltage UL (Use Group C) 50 V 600 V Rated current UL (Use Group C) 26 A 26 A Rated voltage UL (Use Group D) 300 V 300 V Rated current UL (Use Group D) 0 A 0 A Connection Data Connection technology Push-in CAGE CLAMP Strip length 0 2 mm / 0.39 0.7 inch Conductor entry angle to the PCB 0 Conductor cross-sections Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Solder Pin Data Solder pin length Solder pin dimensions Drilled hole diameter mm 0.8 x mm.3 +0. mm Pollution degree 2 Material Data Material group I Insulation material Polyamide 66 (PA 66) Flammability class per UL9 V0 Limit temperature range +05 C Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Tin-plated Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 28 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section PCB Terminal Blocks PCB Terminal Block; mm² Pin Spacing: 5 mm; 7.5 mm;.5 mm 262 Series Dimensions (in mm): Dimensions (in mm): Dimensions (in mm): 5, 5, 5, 5 L 2,3,5,2 0,8 8,2 5,6 6,3 7,5 L 2,3,5,2 0,8 8,2 5,6 6,3,5 L 2,3,5,2 0,8 8,2 5,6 6,3 8,2 2,55 5 Ø,3 8,2 2,55 Ø,3 7,5 8,2 2,55 Ø,3,5 PCB terminal block; conductor entry parallel to PCB; 2 solder pins/pole; gray; 5 mm (0.97 inch) pin spacing PCB terminal block; conductor entry parallel to PCB; 2 solder pins/pole; gray; 7.5 mm (0.295 inch) pin spacing PCB terminal block; conductor entry parallel to PCB; 2 solder pins/pole; gray;.5 mm (0.53 inch) pin spacing Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 262-0 300 262-302 200 262-502 00 262-02 200 262-303 20 262-503 80 262-03 50 262-30 80 262-50 50 262-0 00 262-305 70 262-505 0 262-05 00 262-306 50 262-506 0 262-06 80 262-307 50 262-507 30 262-07 50 262-308 0 262-508 25 262-08 50 262-309 35 262-509 25 262-09 50 0 262-30 35 0 262-50 20 0 262-0 0 262-3 25 262-5 20 262-35 2 262-32 25 2 262-52 20 2 262-2 35 Available upon request (depending on quantity required): Other pole numbers Other colors Direct marking PCB Terminal Blocks and Connectors 29

Volume 2, Section PCB Terminal Blocks www.wago.com PCB Terminal Block; mm² Pin Spacing: 5 mm; 7.5 mm;.5 mm 262 Series PCB terminal block with Push-in CAGE CLAMP connection Push-in termination of solid and ferruled conductors Ideal for panel feedthrough applications via operation parallel to conductor entry Testing can be performed both parallel and perpendicular to conductor entry Current-Carrying Capacity Curve Pin spacing: 5 mm / Conductor cross-section: mm² "f-st" Based on: EN 6052-5-2 / Reduction factor: Current in A 0 30 Electrical Data for Pin Spacing 5 mm 0.97 inch 7.5 mm 0.295 inch.5 mm 0.53 inch Ratings per* IEC/EN 6066- IEC/EN 6066- IEC/EN 6066- Nominal voltage (III / 3) 320 V 630 V 000 V Rated impulse voltage (III / 3) kv 6 kv 8 kv Rated voltage (III / 2) 00 V 630 V 000 V Rated surge voltage (III / 2) kv 6 kv 8 kv Rated voltage (II / 2) 630 V 000 V 000 V Rated surge voltage (II / 2) kv 6 kv 8 kv Rated current 32 A 32 A 32 A 20 0 0 0 20 30 0 50 60 70 80 90 00 05 Ambient operating temperature in C 2-, -, 6-, 2- pole Conductor rated current Approvals per UL 059 UL 059 UL 059 Rated voltage UL (Use Group B) 300 V 300 V 600 V Rated current UL (Use Group B) 26 A 26 A 26 A Rated voltage UL (Use Group C) 50 V 600 V Rated current UL (Use Group C) 26 A 26 A Rated voltage UL (Use Group D) 300 V 300 V Rated current UL (Use Group D) 0 A 0 A Connection Data Connection technology Push-in CAGE CLAMP Strip length 0 2 mm / 0.39 0.7 inch Conductor entry angle to the PCB 90 Conductor cross-sections Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Solder Pin Data Solder pin length Solder pin dimensions Drilled hole diameter mm 0.8 x mm.3 +0. mm Pollution degree 2 Material Data Material group I Insulation material Polyamide 66 (PA 66) Flammability class per UL9 V0 Limit temperature range +05 C Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Tin-plated Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 30 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section PCB Terminal Blocks PCB Terminal Block; mm² Pin Spacing: 5 mm; 7.5 mm;.5 mm 262 Series Dimensions (in mm): Dimensions (in mm): Dimensions (in mm): 6,3 6,3 6,3 7,5 L 2,3,5,2 0,8 8,2 5, 2,75 7,5 L 2,3,5,2 0,8 8,2 5, 2,75,5 L 2,3,5,2 0,8 8,2 5, 2,75 8,2 2,7 5 Ø,3 8,2 2,7 7,5 PCB terminal block; conductor entry perpendicular to PCB; 2 solder pins/pole; gray; 5 mm (0.97 inch) pin spacing Ø,3 PCB terminal block; conductor entry perpendicular to PCB; 2 solder pins/pole; gray; 7.5 mm (0.295 inch) pin spacing 8,2 2,7,5 Ø,3 PCB terminal block; conductor entry perpendicular to PCB; 2 solder pins/pole; gray;.5 mm (0.53 inch) pin spacing Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 262-30 300 262-3302 200 262-3502 00 262-302 200 262-3303 20 262-3503 80 262-303 50 262-330 80 262-350 50 262-30 00 262-3305 70 262-3505 0 262-305 00 262-3306 50 262-3506 0 262-306 80 262-3307 50 262-3507 30 262-307 50 262-3308 0 262-3508 25 262-308 50 262-3309 35 262-3509 25 262-309 50 0 262-330 35 0 262-350 20 0 262-30 0 262-33 25 262-35 20 262-3 35 2 262-332 25 2 262-352 20 2 262-32 35 Available upon request (depending on quantity required): Other pole numbers Other colors Direct marking PCB Terminal Blocks and Connectors 3

Volume 2, Section PCB Terminal Blocks www.wago.com PCB Terminal Block; 6 mm² Pin Spacing: 7.5 mm 2626 Series PCB terminal block with Push-in CAGE CLAMP connection Push-in termination of solid and ferruled conductors Ideal for panel feedthrough applications via operation parallel to conductor entry Testing can be performed both parallel and perpendicular to conductor entry Spacers can be used to increase the pin spacing. 80 60 0 20 Current-Carrying Capacity Curve Pin spacing: 7,5 mm / Conductor cross-section: 6 mm 2 "f-st" Based on: EN 6052-5-2 / Reduction factor: Current in A 0 0 20 30 0 50 60 70 80 90 0005 Electrical Data Ratings per* IEC/EN 6066- Nominal voltage (III / 3) 800 V Rated impulse voltage (III / 3) 8 kv Rated voltage (III / 2) 000 V Rated surge voltage (III / 2) 8 kv Rated voltage (II / 2) 000 V Rated surge voltage (II / 2) 8 kv Rated current A Approvals per UL 059 Rated voltage UL (Use Group B) 600 V Rated current UL (Use Group B) 35 A Rated voltage UL (Use Group C) 600 V Rated current UL (Use Group C) 35 A 2-, -, 6-, 2- pole Ambient operating temperature in C Conductor rated current Connection Data Connection technology Push-in CAGE CLAMP Strip length 3 5 mm / 0.5 0.59 inch Conductor entry angle to the PCB 0 Conductor cross-sections Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Solder Pin Data Solder pin length Solder pin dimensions Drilled hole diameter mm 2 +0. mm Material Data Material group I Insulation material Polyamide 66 (PA 66) Flammability class per UL9 V0 Limit temperature range +05 C Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Tin-plated Pollution degree 2 UL/CSA approval pending Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 32 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section PCB Terminal Blocks PCB Terminal Block; 6 mm² Pin Spacing: 7.5 mm 2626 Series Dimensions (in mm): Dimensions (in mm):,8,8,5 L Ø 2 (2,7) 3,2 2,2 6,9,5 6,6 7,5 L 3,2 Ø 2 (2,7) 3,2 2,2 3,2,9 9,6 PCB terminal block; conductor entry parallel to PCB; 2 solder pins/pole; gray; 7.5 mm (0.295 inch) pin spacing 7,5 PCB terminal block; conductor entry parallel to PCB; staggered solder pin/pole; gray; 7.5 mm (0.295 inch) pin spacing Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 2626-0 200 2626-02/020-000 0 2626-03/020-000 90 2626-0/020-000 70 2626-05/020-000 60 2626-06/020-000 50 2626-07/020-000 0 2626-08/020-000 0 2626-09/020-000 35 0 2626-0/020-000 30 2626-/020-000 25 2 2626-2/020-000 25 Available upon request (depending on quantity required): Other pole numbers Other colors Other pin spacing Direct marking PCB Terminal Blocks and Connectors 33

Volume 2, Section PCB Terminal Blocks www.wago.com PCB Terminal Block; 6 mm² Pin Spacing: 7.5 mm 2626 Series PCB terminal block with Push-in CAGE CLAMP connection Push-in termination of solid and ferruled conductors Ideal for panel feedthrough applications via operation parallel to conductor entry Testing can be performed both parallel and perpendicular to conductor entry Spacers can be used to increase the pin spacing. 80 60 0 20 Current-Carrying Capacity Curve Pin spacing: 7,5 mm / Conductor cross-section: 6 mm 2 "f-st" Based on: EN 6052-5-2 / Reduction factor: Current in A 0 0 20 30 0 50 60 70 80 90 00 05 Electrical Data Ratings per* IEC/EN 6066- Nominal voltage (III / 3) 800 V Rated impulse voltage (III / 3) 8 kv Rated voltage (III / 2) 000 V Rated surge voltage (III / 2) 8 kv Rated voltage (II / 2) 000 V Rated surge voltage (II / 2) 8 kv Rated current A Approvals per UL 059 Rated voltage UL (Use Group B) 600 V Rated current UL (Use Group B) 35 A Rated voltage UL (Use Group C) 600 V Rated current UL (Use Group C) 35 A 2-, -, 6-, 2- pole Ambient operating temperature in C Conductor rated current Connection Data Connection technology Push-in CAGE CLAMP Strip length 3 5 mm / 0.5 0.59 inch Conductor entry angle to the PCB 90 Conductor cross-sections Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Solder Pin Data Solder pin length Solder pin dimensions Drilled hole diameter mm 2 +0. mm Material Data Material group I Insulation material Polyamide 66 (PA 66) Flammability class per UL9 V0 Limit temperature range +05 C Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Tin-plated Pollution degree 2 UL/CSA approval pending Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 3 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section PCB Terminal Blocks PCB Terminal Block; 6 mm² Pin Spacing: 7.5 mm 2626 Series Dimensions (in mm):,8 Dimensions (in mm):,8 2,2 2,2,5 L (2,7) 2,6 8,5,5 7,5 L (2,7) 2,6 8,5 Ø 2 2,6 6,6 Ø 2 7,5 Insert solid conductors via push-in termination. all conductors via operating tool. PCB terminal block; conductor entry perpendicular to PCB; 2 solder pins/pole; gray; 7.5 mm (0.295 inch) pin spacing PCB terminal block; conductor entry perpendicular to PCB; staggered solder pin/pole; gray; 7.5 mm (0.295 inch) pin spacing Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 2626-30 200 2626-302/020-000 0 2626-303/020-000 90 2626-30/020-000 70 2626-305/020-000 60 2626-306/020-000 50 2626-307/020-000 0 2626-308/020-000 0 2626-309/020-000 35 0 2626-30/020-000 30 2626-3/020-000 25 2 2626-32/020-000 25 Available upon request (depending on quantity required): Other pole numbers Other colors Other pin spacing Direct marking PCB Terminal Blocks and Connectors 35

Volume 2, Section PCB Terminal Blocks www.wago.com PCB Terminal Block; 6 mm² Pin Spacing: 0 mm 2636 Series PCB terminal block with Push-in CAGE CLAMP connection Push-in termination of solid and ferruled conductors Ideal for panel feedthrough applications via operation parallel to conductor entry Testing can be performed both parallel and perpendicular to conductor entry Spacers can be used to increase the pin spacing. 0 00 Current-Carrying Capacity Curve Pin spacing: 0 mm / Conductor cross-section: 6 mm 2 "f-st" Based on: EN 6052-5-2 / Reduction factor: Current in A 80 0 0 0 20 30 0 50 60 70 80 90 0005 2-, -, 6-, 2- pole Ambient operating temperature in C Conductor rated current Electrical Data Ratings per* IEC/EN 6066- Nominal voltage (III / 3) 000 V Rated impulse voltage (III / 3) 8 kv Rated voltage (III / 2) 000 V Rated surge voltage (III / 2) 8 kv Rated voltage (II / 2) 000 V Rated surge voltage (II / 2) 8 kv Rated current 76 A Approvals per UL 059 Rated voltage UL (Use Group B) 600 V Rated current UL (Use Group B) 66 A Rated voltage UL (Use Group C) 600 V Rated current UL (Use Group C) 66 A Connection Data Connection technology Push-in CAGE CLAMP Strip length 8 20 mm / 0.7 0.79 inch Conductor entry angle to the PCB 0 Conductor cross-sections Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Solder Pin Data Solder pin length Solder pin dimensions Drilled hole diameter mm.7 +0. mm Material Data Material group I Insulation material Polyamide 66 (PA 66) Flammability class per UL9 V0 Limit temperature range +05 C Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Tin-plated Pollution degree 2 UL/CSA approval pending Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 36 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section PCB Terminal Blocks PCB Terminal Block; 6 mm² Pin Spacing: 0 mm 2636 Series Dimensions (in mm): Dimensions (in mm): 28,6,2 2,5,2,6 2,5 5 2,33 5,5 2,33 0 5 29, L L,3 Ø,7 Ø,7 5,5 29, 5 2,6 5 28,6 PCB terminal block; conductor entry parallel to PCB; 6 solder pins/pole; gray; 0 mm (0.39 inch) pin spacing 2,5 0 5 PCB terminal block; conductor entry parallel to PCB; 3 solder pins/pole; gray; 0 mm (0.39 inch) pin spacing Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 2636-0 00 2636-02/020-000 50 2636-03/020-000 50 2636-0/020-000 25 2636-05/020-000 25 2636-06/020-000 25 2636-07/020-000 20 2636-08/020-000 20 2636-09/020-000 20 0 2636-0/020-000 5 2636-/020-000 5 2 2636-2/020-000 5 Available upon request (depending on quantity required): Other pole numbers Other colors Other pin spacing Direct marking PCB Terminal Blocks and Connectors 37

Volume 2, Section PCB Terminal Blocks www.wago.com PCB Terminal Block; 6 mm² Pin Spacing: 0 mm 2636 Series PCB terminal block with Push-in CAGE CLAMP connection Push-in termination of solid and ferruled conductors Ideal for panel feedthrough applications via operation parallel to conductor entry Testing can be performed both parallel and perpendicular to conductor entry 0 00 Current-Carrying Capacity Curve Pin spacing: 0 mm / Conductor cross-section: 6 mm 2 "f-st" Based on: EN 6052-5-2 / Reduction factor: Current in A 80 0 0 0 20 30 0 50 60 70 80 90 0005 Electrical Data Ratings per* IEC/EN 6066- Nominal voltage (III / 3) 000 V Rated impulse voltage (III / 3) 8 kv Rated voltage (III / 2) 000 V Rated surge voltage (III / 2) 8 kv Rated voltage (II / 2) 000 V Rated surge voltage (II / 2) 8 kv Rated current 76 A Approvals per UL 059 Rated voltage UL (Use Group B) 600 V Rated current UL (Use Group B) 66 A Rated voltage UL (Use Group C) 600 V Rated current UL (Use Group C) 66 A 2-, -, 6-, 2- pole Ambient operating temperature in C Conductor rated current Connection Data Connection technology Push-in CAGE CLAMP Strip length 8 20 mm / 0.7 0.79 inch Conductor entry angle to the PCB 90 Conductor cross-sections Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Solder Pin Data Solder pin length Solder pin dimensions Drilled hole diameter mm.7 +0. mm Material Data Material group I Insulation material Polyamide 66 (PA 66) Flammability class per UL9 V0 Limit temperature range +05 C Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Tin-plated Pollution degree 2 UL/CSA approval pending Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 38 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section PCB Terminal Blocks PCB Terminal Block; 6 mm² Pin Spacing: 0 mm 2636 Series Dimensions (in mm): Dimensions (in mm): 3,3 3,3,2 2,5 5 L 2,33 Ø,7 5 2,8 3,95,2 0 5 L 2,5 2,33 5 2,8 3,95 5 5 2,5 0 5 Ø,7 Insert solid conductors via push-in termination. all conductors via operating tool. PCB terminal block; conductor entry perpendicular to PCB; 6 solder pins/pole; gray; 0 mm (0.39 inch) pin spacing PCB terminal block; conductor entry perpendicular to PCB; 3 staggered solder pins/pole; gray; 0 mm (0.39 inch) pin spacing Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 2636-30 00 2636-302/020-000 50 2636-303/020-000 50 2636-30/020-000 25 2636-305/020-000 25 2636-306/020-000 25 2636-307/020-000 20 2636-308/020-000 20 2636-309/020-000 20 0 2636-30/020-000 5 2636-3/020-000 5 2 2636-32/020-000 5 Available upon request (depending on quantity required): Other pole numbers Other colors Other pin spacing Direct marking PCB Terminal Blocks and Connectors 39

Volume 2, Section 2 SMD PCB Terminal Blocks www.wago.com Through-Board SMD PCB Terminal Block; 0.75 mm² Pin Spacing: 6.5 mm 2070 Series SMD PCB terminal block with Push-in CAGE CLAMP connection for back-side wiring of LED modules Low profile of just. mm on the module s front side Connect solid conductors via push-in termination Insert fine-stranded conductors and remove all conductors via operating tool 2 Electrical Data for FR PCB Type Ratings per* IEC/EN 6066- Nominal voltage (III / 3) 320 V Rated surge voltage (III / 3) kv Rated voltage (III / 2) 320 V Rated surge voltage (III / 2) kv Nominal voltage (II / 2) 630 V Rated surge voltage (II / 2) kv Rated current 9 A Electrical Data for Metal-Core PCBs Ratings per* IEC/EN 6066- Nominal voltage (III / 3) 200 V Rated surge voltage (III / 3) kv Rated voltage (III / 2) 320 V Rated surge voltage (III / 2) kv Nominal voltage (II / 2) 500 V Rated surge voltage (II / 2) kv Rated current 9 A Approvals per UL 977 Rated voltage UL 600 V Rated current UL 9 A Connection Data Connection technology Push-in CAGE CLAMP Strip length 8.5 0 mm / 0.35 0.395 inch Conductor entry angle to the PCB 0 Conductor range Solid conductor Fine-stranded conductor Clearance and creepage distances >=3.0 mm: 500 V in applications per EN 60598- Pollution degree 2 Material Data Material group I Insulation material Polyphthalamide (PPA GF) Flammability class per UL9 V0 Limit temperature range +05 C Contact material Copper alloy Contact plating Tin-plated Operating tool see page 57 Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 0 PCB Terminal Blocks and Pluggable Connectors

www.wago.com Volume 2, Section 2 SMD PCB Terminal Blocks Through-Board SMD PCB Terminal Block without Cover; 0.75 mm² Pin Spacing: 6.5 mm 2070 Series 2 Dimensions (in mm): Dimensions (in mm): Dimensions (in mm): 2,6 2,6 2,6 8, 22,2 5,3 0,95 6,5 5,3 7, 8, 22,2 5,3 0,95 6,5 6,5 0,5,8 7,5 8, 22,2 5,3 0,95 6,5 6,5 6,5 7 8,3 7,5 3, 3,3 3 3,3 3, 3,3 3 3,3 3,5 3, 3,3 3 3,3 3,5 3,5 2 9,6, max. R 6,5 2 9,6 max. R 0,9 6,5 7, 2 9,6 max. R 0, R 23,5 8,9 23,5 0, R 23,5 8,9 23,5 0, R 23,5 23,5 8,9 8 6 2 R = Feed direction R = Feed direction R = Feed direction Through-board SMD PCB terminal block without cover; in tape-and-reel packaging; 330 mm reel diameter Through-board SMD PCB terminal block without cover; in tape-and-reel packaging; 330 mm reel diameter Through-board SMD PCB terminal block without cover; in tape-and-reel packaging; 330 mm reel diameter Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 2070-5/998-06 770 (95) 2 2070-52/998-06 2385 (77) 3 2070-53/998-06 590 (38) ductors via operating tool. Solid conductors can also be terminated by simply pushing them in. Use an operating tool or simply "twist and pull" to remove solid conductors. Shift wiring to the back of the LED module via 2070 Series SMD PCB Terminal Blocks. PCB Terminal Blocks and Pluggable Connectors

Volume 2, Section 2 SMD PCB Terminal Blocks www.wago.com Through-Board SMD PCB Terminal Block with Cover; 0.75 mm² Pin Spacing: 6.5 mm 2070 Series 2 Dimensions (in mm): Dimensions (in mm): Dimensions (in mm): 2,6 2,6 2,6 7, 5,3 3,3 3 3,3 3,5, 5,3 6,5 5,3 6,5 8, 22,2 0,95 8, 22,2 0,95 3, 3, 3,3 3 3,3 3,5 7,5 5,3 6,5 6,5 0,5,8 8, 22,2 0,95 6,5 6,5 7 8,3 3, 3,3 3,3 3,5 7,5 3 2 9,6 max. R 6,5 2 9,6 max. R 0,9 6,5 7, 2 9,6 max. R 0, R 2,95 8,9 23,5 0, R 2,95 8,9 23,5 0, R = Feed direction 2,95 R 23,5 8,9 8 6 2 R = Feed direction R = Feed direction R = Feed direction Through-board SMD PCB terminal block with cover; in tape-and-reel packaging; 330 mm reel diameter Through-board SMD PCB terminal block with cover; in tape-and-reel packaging; 330 mm reel diameter Through-board SMD PCB terminal block with cover; in tape-and-reel packaging; 330 mm reel diameter Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 2070-6/998-06 770 (95) 2 2070-62/998-06 2385 (77) 3 2070-63/998-06 590 (38) ductors via operating tool. Solid conductors can also be terminated by simply pushing them in. Use an operating tool or simply "twist and pull" to remove solid conductors. The variants with cover feature a center contact surface for easy pick-and-place assembly and minimum shadowing. 2 PCB Terminal Blocks and Pluggable Connectors

www.wago.com Volume 2, Section 2 SMD PCB Terminal Blocks Through-Board SMD PCB Terminal Block with Cover and Marking; 0.75 mm² Pin Spacing: 6.5 mm 2070 Series 2 Dimensions (in mm): Dimensions (in mm): Dimensions (in mm): 2,6 2,6 2,6 7, 5,3 3,3 3 3,3 3,5, 5,3 6,5 5,3 6,5 8, 22,2 0,95 8, 22,2 3,5 7,5 0,95 5,3 6,5 6,5 0,5,8 8, 22,2 0,95 6,5 6,5 7 8,3 3, 3, 3,3 3 3,3 3, 3,3 3,3 3,5 7,5 3 2 9,6 max. R 6,5 2 9,6 max. R 0,9 6,5 7, 2 9,6 max. R 0, R 2,95 8,9 23,5 0, R 2,95 8,9 23,5 0, 2,95 R 23,5 8,9 8 6 2 R = Feed direction R = Feed direction R = Feed direction Through-board SMD PCB terminal block with cover and marking (+); in tape-and-reel packaging; 330 mm reel diameter Through-board SMD PCB terminal block with cover and marking (+ -); in tape-and-reel packaging; 330 mm reel diameter Through-board SMD PCB terminal block with cover and marking (+ - plain); in tape-and-reel packaging; 330 mm reel diameter Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 2070-52/998-06 770 (95) 2 2070-522/998-06 2385 (77) 3 2070-523/998-06 590 (38) ductors via operating tool. Solid conductors can also be terminated by simply pushing them in. Use an operating tool or simply "twist and pull" to remove solid conductors. the back of the module. PCB Terminal Blocks and Pluggable Connectors 3

Volume 2, Section 2 SMD PCB Terminal Blocks www.wago.com Through-Board SMD PCB Terminal Block with Cover and Marking; 0.75 mm² Pin Spacing: 6.5 mm 2070 Series 2 Dimensions (in mm): Dimensions (in mm): Dimensions (in mm): 2,6 2,6 2,6 7, 5,3 3,3 3 3,3 3,5, 5,3 6,5 5,3 6,5 8, 22,2 0,95 8, 22,2 3,5 7,5 0,95 5,3 6,5 6,5 0,5,8 8, 22,2 0,95 6,5 6,5 7 8,3 3, 3, 3,3 3 3,3 3, 3,3 3,3 3,5 7,5 3 2 9,6 max. R 6,5 2 9,6 max. R 0,9 6,5 7, 2 9,6 max. R 0, R 2,95 8,9 23,5 0, R 2,95 8,9 23,5 0, 2,95 R 23,5 8,9 8 6 2 R = Feed direction R = Feed direction R = Feed direction Through-board SMD PCB terminal block with cover and marking (-); in tape-and-reel packaging; 330 mm reel diameter Through-board SMD PCB terminal block with cover and marking (-+); in tape-and-reel packaging; 330 mm reel diameter Through-board SMD PCB terminal block with cover and marking (plain - +); in tape-and-reel packaging; 330 mm reel diameter Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 2070-5/998-06 770 (95) 2 2070-52/998-06 2385 (77) 3 2070-53/998-06 590 (38) ductors via operating tool. Solid conductors can also be terminated by simply pushing them in. Use an operating tool or simply "twist and pull" to remove solid conductors. the back of the module. PCB Terminal Blocks and Pluggable Connectors

www.wago.com Volume 2, Section 2 SMD PCB Terminal Blocks Operating Tool 2 Operating tool for 2070 Series Item No. Pack. Unit 2070-00 ductors via operating tool. Solid conductors can also be terminated by simply pushing them in. PCB Terminal Blocks and Pluggable Connectors 5

Volume 2, Section 2 SMD PCB Terminal Blocks www.wago.com 2 SMD PCB Terminal Block; 0.75 mm² 2065 Series SMD PCB terminal block with Push-in CAGE CLAMP and Push-Button Connect solid conductors via push-in termination Convenient termination/removal of fine-stranded conductors via push-button and operating tool Just 2.7 mm tall Available in tape-and-reel packaging for automated assembly (only for solid conductors) Electrical Data for Pin spacing 6.5 mm / 0.256 inch 6 mm / 0.236 inch Connection technology Push-in CAGE CLAMP Ratings per* IEC/EN 6066- IEC/EN 6066- Rated voltage (III / 3) 320 V 250 V Rated surge voltage (III / 3) kv kv Rated voltage (III/2) 320 V 320 V Rated surge voltage (III / 2) kv kv Rated voltage (II / 2) 630 V 630 V Rated surge voltage (II / 2) kv kv Rated current 9 A 9 A Approvals per UL 977 UL 977 Rated voltage UL 600 V 600 V Rated current UL 9 A 9 A Connection Data Connection technology Push-in CAGE CLAMP Strip length 7.5 9.5 mm / 0.3 0,37 inch Conductor entry angle to the PCB 0 Conductor cross-sections Solid conductor Fine-stranded conductor Connection technology Strip length 7.5 9.5 mm / 0.3 0,37 inch Conductor entry angle to the PCB 0 Conductor cross-sections Solid conductor NOTE: Terminal block without insulation housing! Protection against accidental contact must be provided at voltages higher than low voltages (e.g., SELV/PELV) for the relevant application. Material Data Limit temperature range +20 C Clamping spring material Chrome-nickel spring steel (CrNi) Contact material Copper alloy Contact plating Tin-plated The layout must meet the requirements of the insulation coordination standard EN/IEC 6066- and applicable end product standards. Pollution degree 2 Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 6 PCB Terminal Blocks and Pluggable Connectors

www.wago.com Volume 2, Section 2 SMD PCB Terminal Blocks SMD PCB Terminal Block; 0.75 mm² 2065 Series 2 Dimensions (in mm): Dimensions (in mm): Dimensions (in mm): 8 8 0,3 3,3 2,7 2,7 R 8 7,8 7,95 6, 9, 6 8 7,8 7,95 6, 9,6 9,9 6 9, 5, 2,3 2,9 0,5 0,2 7,8 2 2,3 0,5 0,2 7,8 2 8 R = Feed direction <_,2 _> 2,9 <_ < 3,6 > 2,3 ( < 3,7 > 2,3 < <_, _> 2, <_ < 6,5 > < 3,9 > 2, <_ < 6 > SMD PCB terminal block with push-button; in tape-and-reel packaging; 330 mm reel diameter; Push-in CAGE CLAMP ; 6.5 mm (0.256 inch) pin spacing SMD PCB terminal block without push-button; in tape-and-reel packaging; 330 mm reel diameter; PUSH WIRE ; 6 mm (0.236 inch) pin spacing Operating tool for 2065 Series Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Item No. Pack. Unit 2065-00/998-03 3800 (2650) 2065-0/998-03 3800 (2650) 2065-89 600 (50) < > 5 < 2,6 < < 9,5 <,5 < < > < Required area for operating tool Push-in CAGE CLAMP version: conductors via operating tool. Solid conductors can be terminated by simply pushing them in. Even more space savings when using exclusively solid conductors. The operating tool s funneled conductor entry accurately guides the conductor into the terminal block. PCB Terminal Blocks and Pluggable Connectors 7

Volume 2, Section 2 SMD PCB Terminal Blocks www.wago.com Board-to-Board Link for SMD PCB Terminal Blocks; 0.5 mm²; Pin Spacing: 3 mm 2059 Series Board-to-board links simplify LED module assembly Easy push-in connection and disconnection 2 Electrical Data for Pin Spacing 3 mm / 0.8 inch Ratings per* IEC/EN 6066- Nominal voltage (III / 3) 63 V Rated surge voltage (III / 3) 2.5 kv Rated voltage (III / 2) 60 V Rated surge voltage (III / 2) 2.5 kv Nominal voltage (II / 2) 320 V Rated surge voltage (II / 2) 2.5 kv Rated Current 3 A Material Data Material group I Insulation material Polyamide 66 (PA 66) Flammability class per UL9 V0 Limit temperature range +05 C Contact material Copper alloy Contact Plating Silver-plated Pollution degree 2 Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 8 PCB Terminal Blocks and Pluggable Connectors

< < < < < 5,3 > 3 > < < 3,05 < 9,2 2,5 max. 0,63 > < > < < 7,5 > 3 > < 2,5 max. 0,63 > < 2,75 <_ < < www.wago.com Volume 2, Section 2 SMD PCB Terminal Blocks Board-to-Board Link for SMD PCB Terminal Blocks; 0.5 mm²; Pin Spacing: 3 mm 2059 Series 2 ): ): ): 3 > < <,5 < 9,2 > < < 20,5 > <_ 5,65 < 9,2 <_ 2,5 > < max. 0,63 > < Board-to-board link for SMD PCB terminal blocks; 5.3 mm pin length; white; 3 mm (0.8 inch) pin spacing Board-to-board link for SMD PCB terminal blocks; 7.5 mm pin length; white; 3 mm (0.8 inch) pin spacing Board-to-board link for SMD PCB terminal blocks; 20.5 mm pin length; white; 3 mm (0.8 inch) pin spacing Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 2059-90 500 2059-90/08-000 500 2059-90/02-000 500 2 2059-902 500 2 2059-902/08-000 500 2 2059-902/02-000 500 3 2059-903 375 3 2059-903/08-000 375 3 2059-903/02-000 375 2059-90 250 2059-90/08-000 250 2059-90/02-000 250 Inserting a board-to-board link into the terminal block. terminal blocks on adjoining PCBs via board-toboard link. Disassembly: Pull PCBs apart (max. 0 mating cycles). The PCBs must be secured. <_ 0,6 <_ <_ < 20 20 2, 3,3 (5,3),6 5, (7,5) 7,6 8,2 (20,5) < < PCB Terminal Blocks and Pluggable Connectors 9

Volume 2, Section 2 SMD PCB Terminal Blocks www.wago.com Board-to-Board Link for SMD PCB Terminal Blocks with Push-Buttons;.5 mm²; Pin Spacing: 6 mm 206 Series Board-to-board links simplify LED module assembly Easy push-in connection and disconnection without push-button actuation 2 Electrical Data for Pin Spacing 6 mm / 0.236 inch Ratings per* IEC/EN 6066- Nominal voltage (III / 3) 250 V Rated surge voltage (III / 3) kv Rated voltage (III / 2) 320 V Rated surge voltage (III / 2) kv Nominal voltage (II / 2) 630 V Rated surge voltage (II / 2) kv Rated current 9 A Material Data Material group I Insulation material Polyamide 66 (PA 66) Flammability class per UL9 V0 Limit temperature range +05 C Contact material Copper alloy Contact Plating Silver-plated Pollution degree 2 Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 50 PCB Terminal Blocks and Pluggable Connectors

< < < < < 6 > < < 6 > < max.,0 > < < 3 > < 9,35 < 5,3 < max. > < > < 5,6 < www.wago.com Volume 2, Section 2 SMD PCB Terminal Blocks Board-to-Board Link for SMD PCB Terminal Blocks with Push-Buttons;.5 mm²; Pin Spacing: 6 mm 206 Series 2 Dimensions (in mm): Dimensions (in mm): < 30 > 7,35 < 5,3 > < Board-to-board link for SMD PCB terminal blocks with push-buttons; white; 30 mm pin length; 6 mm (0.236 inch) pin spacing Board-to-board link for SMD PCB terminal blocks with push-buttons; white; 3 mm pin length; 6 mm (0.236 inch) pin spacing Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 206-90 700 206-90/03-000 700 2 206-902 300 2 206-902/03-000 300 3 206-903 200 3 206-903/03-000 200 206-90 00 206-90/03-000 00 Inserting a board-to-board link into the terminal block. terminal blocks on adjoining PCBs via board-toboard link. Disassembly: Pull PCBs apart (max. 0 mating cycles). The PCBs must be secured. 0,6 < 20 < 20 2,9 6,0 (30) 8, 9,5 (3) < < < PCB Terminal Blocks and Pluggable Connectors 5

Volume 2, Section 7 MCS MULTI CONNECTION SYSTEM MAXI www.wago.com -Conductor Female Connector with Levers Pin Spacing: 0.6 mm MCS MAXI 6 Intuitive and tool-free lever actuation Universal connection for all conductor types Push-in termination of solid or ferruled conductors Test slot 0 and 90 to conductor entry 00% protected against mismating Coding via coding fingers Electrical Data Ratings per* IEC/EN 6066- Nominal voltage (III / 3) 000 V Rated surge voltage (III / 3) 8 kv Rated voltage (III / 2) 000 V Rated surge voltage (III / 2) 8 kv Nominal voltage (II / 2) 000 V Rated surge voltage (II / 2) 8 kv Rated current 76 A 7 Connection Data Connection technology Strip length Conductor range Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Push-in CAGE CLAMP 8 20 mm / 0.7 0.79 inch Material Data Material group I Insulating material Polybutylene terephthalate (PBT) Flammability class per UL9 V0 Limit temperature range +20 C Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Silver-plated Additional springs for socket contact Chrome nickel spring steel (CrNi) The MULTI CONNECTION SYSTEM (MCS) is designed without breaking capacity for compliance connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated. Pollution degree 2 Coding pins, see page 70 Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 52 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section 7 MCS MULTI CONNECTION SYSTEM MAXI -Conductor Female Connector with Levers Pin Spacing: 0.6 mm MCS MAXI 6 Dimensions (in mm): Dimensions (in mm): 9,8 27,7 9,8 27,7 29, 5,2,5 29, 5,2 T 30,7 5,7 25,7 T 30,7 5,7 L L = pole no. x pin spacing +.3 mm 6 L 6 L = pole no. x pin spacing +.3 mm -conductor female connector with levers; light gray; 0.6 mm (0. inch) pin spacing -conductor female connector with levers and locking lever; light gray; 0.6 mm (0. inch) pin spacing Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit 832-02 50 832-02/037-000 25 832-03 50 832-03/037-000 25 832-0 20 832-0/037-000 20 832-05 20 832-05/037-000 0 832-06 0 832-06/037-000 0 7 Available upon request (depending on quantity required): Other pole numbers PCB Terminal Blocks and Connectors 53

Volume 2, Section 7 MCS MULTI CONNECTION SYSTEM MAXI www.wago.com THT Male Header Pin Spacing: 0.6 mm MCS MAXI 6 Male header may be mounted horizontally or vertically via straight or angled solder pins Three solder pins per pole provide high electrical and mechanical stability Mating face (IP2XB) with higher protection against accidental contact 00% protected against mismating Coding via coding fingers Electrical Data Ratings per* IEC/EN 6066- Nominal voltage (III / 3) 800 V Rated surge voltage (III / 3) 8 kv Rated voltage (III / 2) 000 V Rated surge voltage (III / 2) 8 kv Nominal voltage (II / 2) 000 V Rated surge voltage (II / 2) 8 kv Rated current 76 A Solder Pin Data Solder pin length Solder pin dimensions Drilled hole diameter mm.2 x.2 mm.7 +0. mm 7 Material Data Material group I Insulating material Polybutylene terephthalate (PBT) Flammability class per UL9 V0 Limit temperature range Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Silver-plated The MULTI CONNECTION SYSTEM (MCS) is designed without breaking capacity for compliance connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated. Pollution degree 2 Coding pins, see page 70 Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 5 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section 7 MCS MULTI CONNECTION SYSTEM MAXI THT Male Header Pin Spacing: 0.6 mm MCS MAXI 6 Dimensions (in mm): Dimensions (in mm): Dimensions (in mm): 6,5 5,7 0,6 Ø,2 2 3 5,08 3,7 6,5 5,7 2 3 Ø,2 T 6,5 2,2 5,08 3,8 0,6 5,7 6,5 Ø,2 T 2 3 5,08 2,2 0,6 32 32 32 L L L T0,6 L = pole no. x pin spacing +.3 mm L = pole no. x pin spacing +.3 mm L = pole no. x pin spacing +.3 mm 5,08 3,7 2 n 5,08 3,7 2 n Ø,7 +0, 5,08 3,7 2 n Ø,7 +0, 7 5,7 T Ø,7 +0, 0,6 0,6 5,7 T 5,7 T THT male header; with straight solder pins; 3 solder pins/pole; light gray; 0.6 mm (0. inch) pin spacing THT male header; with upward-angled solder pins; 3 solder pins/pole; light gray; 0.6 mm (0. inch) pin spacing Pole No. Item No. Pole No. Item No. Pole No. Item No. 832-3602 832-3622 832-362 832-3603 832-3623 832-363 832-360 832-362 832-36 832-3605 832-3625 832-365 832-3606 832-3626 832-366 THT male header; with downward-angled solder pins; 3 solder pins/pole; light gray; 0.6 mm (0. inch) pin spacing Available upon request (depending on quantity required): Other pole numbers Protection against PCB mounting errors PCB Terminal Blocks and Connectors 55

Volume 2, Section 7 MCS MULTI CONNECTION SYSTEM MAXI www.wago.com -Conductor Male Connector with Levers Pin Spacing: 0.6 mm MCS MAXI 6 Universal connection for all conductor types Push-in termination of solid or ferruled conductors Test slot 0 and 90 to conductor entry Intuitive and tool-free operation 00% protected against mismating Coding via coding fingers Electrical Data Ratings per* IEC/EN 6066- Nominal voltage (III / 3) 000 V Rated surge voltage (III / 3) 8 kv Rated voltage (III / 2) 000 V Rated surge voltage (III / 2) 8 kv Nominal voltage (II / 2) 000 V Rated surge voltage (II / 2) 8 kv Rated current 76 A 7 Connection Data Connection technology Strip length Conductor range Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Push-in CAGE CLAMP 8 20 mm / 0.7 0.79 inch Material Data Material group I Insulating material Polybutylene terephthalate (PBT) Flammability class per UL9 V0 Limit temperature range +20 C Clamping spring material Chrome nickel spring steel (CrNi) Contact material Electrolytic copper (E Cu ) Contact plating Silver-plated The MULTI CONNECTION SYSTEM (MCS) is designed without breaking capacity for compliance connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated. Pollution degree 2 Coding pins, see page 70 Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit www.wago.com 56 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section 7 MCS MULTI CONNECTION SYSTEM MAXI -Conductor Male Connector with Levers Pin Spacing: 0.6 mm MCS MAXI 6 Dimensions (in mm): 50,6 27,7 5,2 29, 6,5 6,5 5,7 T L L = pole no. x pin spacing +.3 mm -conductor male connector with levers; light gray; 0.6 mm (0. inch) pin spacing Pole No. Item No. 832-202 832-203 832-20 832-205 832-206 7 Available upon request (depending on quantity required): Other pole numbers PCB Terminal Blocks and Connectors 57

Volume 2, Section 7 MCS MULTI CONNECTION SYSTEM MAXI www.wago.com Coding Pins MCS MAXI 6 for male headers and female connectors; orange Item No. Pack. Unit 832-500 00 (25) 7 Coding a THT male header by inserting a coding pin. 58 PCB Terminal Blocks and Connectors

www.wago.com Volume 2, Section 7 MCS MULTI CONNECTION SYSTEM MAXI Snap-In Frames and Lockout Pins MCS MAXI 6 Dimensions (in mm): Dimensions (in mm): Dimensions (in mm): 3,5 < 8,7 < 2 2,7 < <_ 23,3 Ø 5,8 8 7 < < 8,6 Ø 3, 28, 7,5,8 8,3 < L < 8,3 <_ < L = (pole no. x 7.62 mm) + 30.6 mm L Snap-in frame for MCS MAXI male connectors; Lockout pins for snap-in frames; light gray light gray Pole No. Item No. Pack. Unit Item No. Pack. Unit 2 5.8 mm 83-302 8 83-32 00 3 83-303 8 83-30 2 5 83-305 2 Snap-in frames for through-panel MCS MAXI 6 connectors Fast and easy installation without tools Compatible with MCS MAXI 6 male and female connectors For panel thickness ranging from 0.5 to 2.5 mm Optional screw mounting L = (pole no. x 7.62 mm) + 26.8 mm Panel cutout for snap-in frame 7 Insert the snap-in frame into the cutout. Insert the male connector into the snap-in frame. Inserting a female connector equipped with lateral locking levers. Inserting a female connector without lateral locking levers lockout pins are inserted on both sides of the snap-in frame. PCB Terminal Blocks and Connectors 59

Volume 5, WINSTA The Pluggable Connection System WINSTA The Pluggable Connection System

www.wago.com Volume 5; WINSTA The Pluggable Connection System Content Page WINSTA MINI Shield connecting plate; for socket and plug; 5-pole 62 WINSTA MIDI Distribution connector; 5-way 63 Products highlighted in RED are new items for Spring 208 WINSTA The Pluggable Connection System 6

Volume 5, Section WINSTA MINI www.wago.com WINSTA MINI Shield Connecting Plate; 5-Pole 890 Series Shield connecting plate; for socket; 5-pole Item No. Pack. Unit 890-526 50 Shield connecting plate; for plug; 5-pole Item No. Pack. Unit 890-527 50 890 Series and 770 Series Accessories, see Full Line Catalog, Volume 5 Approvals, see www.wago.com Coding Overview, see Full Line Catalog, Volume 5 62 WINSTA The Pluggable Connection System

www.wago.com Volume 5, Section 3 WINSTA MIDI WINSTA MIDI Distribution Connector; 5-Pole 770 Series Rated voltage Rated current 00 V 25 A Dimensions in mm 6 3 50 58,2 Distribution connector; 5-way; x plug/5 x socket Color Item No. Pack. Unit blue 770-97 50 Coding Marking Color I N 3 L DA- DA+ blue WINSTA The Pluggable Connection System 63

Volume 6, Section Terminal Block Marking www.wago.com Micro-WSB Inline Markers for: Color Item No. Pack. Unit Modular Empty Housing, 2857 Series white 2009- Series Modular Empty Housings. 6 Marking

www.wago.com Volume 6, Section 3 Device Marking Circuit ID Labels and Marking Strips Color Item No. Pack. Unit white 20-83 Color Item No. Pack. Unit white 20-8 3 Marking strip; self-adhesive; plain; 20 m/reel; 30 mm wide Color Item No. Pack. Unit yellow 20-87/000-002 Marking strip; self-adhesive; plain; 20 m/reel; 2.7 mm wide; for Siemes ET200 Color Item No. Pack. Unit white 20-880 yellow 20-880/000-002 Marking strip; self-adhesive; plain; 20 m/reel; 22.6 mm wide; for Siemes S7 Color Item No. Pack. Unit white 20-882 yellow 20-882/000-002 Marking 65

Volume 6, Chapter Printer and Software www.wago.com Cutter for smartprinter Hardware requirements: Printer model: smartprinter From manufacturing month/year: 08 August 20 Printer driver: Version 7..2 Software requirements: smartscript: Version 3.88.9.0 or higher Cutter for smartprinter; only for marking strips; Item No. Pack. Unit 258-5030 Approved print material to be cut: Marking Strips: 2009-0, 709-77, 709-78, 757-90/000-005 Self-Adhesive Marking Strips: 20-702, 20-870 -877 Cable Tie Markers: 2-835 -836, 2-836/000-002 Self-Laminating Labels: 2-855 -857 Conductor Markers for Thread-On Mounting: 2-86 -863 Type Labels: 20-80 -80, 20-82 Continuous Labels: 20-83 -83 Dimensions of printing materials: Thickness (max.): 250 μm Technical Data Height Depth 60 mm 07 mm 3 mm 050 g 66 Marking

www.wago.com Band 6 Kapitel Printer and Software Ink Ribbon for smartprinter Thermal transfer ink ribbon for smart 50 mm wide x 7 m Color Item No. Pack. Unit red 258-5005/000-005 Marking 67