V ISIONS A SPECIAL NOR-SHIPPING EDITION OF HATTELAND DISPLAY'S E-NEWS SERIES X WELCOME... to a special edition of Visions during Nor- Shipping 2011 Introducing Series X Our next generation of displays and panel computers. Hatteland Display would like to welcome you to Oslo and to Nor-shipping 2011! This Visions is a special Nor-shipping edition highlighting many NEW PRODUCTS that will for the first time be introduced at this year s exhibition. Furthermore, these products will also be available for closer viewing at our showroom off site in down-town Oslo. As with previous years we don t have our own stand at the Nor-Shipping exhibition, instead the showroom will give you the opportunity to see our new and existing products in much more detail. It will also give us the opportunity to speak with you about your requirements, and to provide you with some good Norwegian hospitality afterwards! Our showroom is in room Titania at the Felix Conference Centre in Oslo's Aker Brygge district on 25th - 26th May. We hope that you enjoy Nor-Shipping and that you are able to visit our showroom in down-town Oslo on one of the dates above. It will make for a good break from the hustle and bustle of the show floor, and we re sure you won't be disappointed with what we have to show you! Lars Skjelbred-Eriksen Vice President Sales & Marketing Hatteland Display As a leading manufacturer of display and computer hardware for the maritime segment, Hatteland Display continuously gauges and responds to market needs. Our commitment to develop specialized products for a multitude of onboard ship systems continues, and with that the introduction now of a brand new product range called, Series X. With cast aluminum, compact (IP22) and sleek by design chassis, the units from this new range can be desk mount or console integrated. The design is modular, allowing for common modules to be used in various models and combinations. This modular approach is also valid for the panel computer versions that have been developed alongside the display versions. The considerable advance made by Hatteland Display over recent years in PC platform development is now enhancing further the panel PC offering. All Series X display sizes are available with state of the art PC technology integrated, designed and built for type approved maritime systems. All together these features and functions bring about a range perfectly in synch to market cost expectations along with that, the performance and type approval always expected in all Hatteland Display products. The modules used in Series X, are all qualified having undergone and passed our extensive test program, which includes HALT testing. This means that the products are tested well outside the requirements in EN60945 and E10. The result is a more reliable product. General features: IP22 / IP66 MULTITOUCH TYPE APPROVED ECDIS COMPLIANT SUPERIOR BONDING TECHNOLOGY MODULE BASED, TAILOR-MADE SYSTEMS MADE EASY! FORM, FIT AND FUNCTION - LONG-TERM COMMITMENT GLASS DISPLAY CONTROL, SOLID STATE MENU SYSTEM SUNLIGHT READABLE / HIGH BRIGHT VERSIONS AVAILABLE...continues on page 2 www.hatteland-display.com
Introducing Series X - Our next generation of displays and panel computers Two of the smallest Series X models are the 8 inch and 13.3 inch. These models are ideal for applications such as engine control systems, automation systems, propulsion control and more. Both sizes have touchscreen options with multitouch support. 8 inch and 13.3 inch SERIES X As for the other Series X models, these are also available as displays or as panel computers; 8 inch - Intel Atom N450 based panel computer and DVI-I (RGB or DVI) 13.3 inch - Intel GM45/P8400 Core 2 Duo or Intel Atom N450 based panel computer and DVI-I (RGB or DVI). Please visit our website or contact us for complete specifications. Key performance: Safety Redundant power supply 2 x CAN w/separate CO processor, running its own software (good for critical applications) Dual LAN Watchdog solution, that can include external watchdog feature Watchdog relay output Isolated IO Industrial connectors Extended alarm function after power loss Functionality IO designed for control in industrial systems 2 x CAN option available 4 x COM (RS422/RS485) NMEA compliant, option available Technical Low power consumption No moving parts Heat-pipe system (no fan) SSD disk (no rotating HDD) Touch screen and touch buttons, projected capacitive technology Multitouch Applications Engine control systems Log systems Automation systems Propulsion control Safety systems Information systems
24 inch Series X, the perfect widescreen for ECDIS applications! Our 24 inch high resolution (1920 x 1080, Full High Definition) is the perfect product for future ECDIS systems. It offers an active image of 531 x 299mm, and 3000:1 in contrast. Type approved maps have never been better viewed! SERIES X There are two main models; Display Panel computer The display version can be combined with any of our standalone computers to form a HW system that complies with ECDIS requirements. It is possible to choose from small fanless systems or larger and more flexible solutions. Using a panel computer version has the advantage of saving both cost and space. The PC platform comprises high-end and up-to-date computer performance; Intel QM57 chipset 2 x removable 2.5 inch bays (for Solid State Drives or conventional hard disks) Dual GIGABIT LAN MULTIPOWER Please visit our website or contact us for complete specifications. All in all, we can offer a solution for most requirements, please contact us to learn more about our new Series X product range.
26 inch ready for mass production! Hatteland Display s new Series 1, 26 inch display responds not only to the maritime market's demand for this size of monitor, but positively and emphatically raises the standard. Hatteland Display's new Series 1, 26 inch display responds not only to the maritime market's demand for this size of monitor, but positively and emphatically raises the standard. The choice of solely embedded components (including embedded LCD panel), and the inclusion of Hatteland Display optical bonding technology as standard, makes this display a robust choice for your system. The Series 1 range of maritime displays has become synonymous in the professional market segment for its reliability and longevity of supply. With this new 26 inch display, the company introduces yet another product with the common features used by many customers already through the extensive Series 1 product portfolio. The key new attribute of the 26 inch display will be to integrate a 16:10 wide screen format industrial LCD panel from an embedded list, into a type approved and economically attractive package for a maritime system. The product will be an ideal platform for any OEM adaptation or customization requirements that system integrators may wish to consider, and Hatteland Display as always is willing to discuss such inquiries. For any custom requirements on this model, please contact your Sales Representative in Hatteland Display.
The optimal ECDIS package Display calibration is a very important aspect of ECDIS. ECDIS represents one of the most rigorous applications of display technology. The cost of making an error in recognition on the display is potentially very high if not fatal. Therefore it is important that ECDIS integrity is maintained and that specifically, monitors match the colour characteristics specified in relevant standards. Hatteland Display supplies both computers and displays to provide an overall ECDIS approved installation. The hardware also meets the requirements set in IEC 62288, IEC 62388, IEC 61174 and IEC 60945. Finally, to ensure the required performance of the system, the RGB colour coordinates are corrected by software algorithms as part of the process. Sophisticated calibration procedure is necessary to account for the different display properties. Inverse colour model transformation allows you to predict what RGB values should be used to produce desired colours on the screen. This process is complicated because the three nonlinear colours have to be corrected simultaneously. Hatteland Display ECDIS calibration overcomes this problem and ensures correct matching between the requirements and actual product. With our extensive technical knowledge and experience, we can deliver the best quality typeapproved ECDIS displays fulfilling IMO requirements. A very large amount and variety of display information has to be presented, distinguished and prioritized on the ECDIS screen. With the night applications all the information must be accurately displayed at very low luminance levels. These points illustrate the need to obtain the maximum performance from the display, in terms of effective colour specification and calibration. The process uses highly specialised calibration equipment e.g. Konica-Minolta CA-210 colour analyzer. Supplied with, detailed implementation instructions and extensive support. The standard communication interface with the monitors includes RS232 / RS422 and RS485. DAY DUSK NIGHT Colour management ensures consistent colour communication while maintaining an open system. Adding and removing devices is based on calibration profiles. Hatteland Display supplies the most flexible method that can be used with several types of graphical adapters at a time. The entire process is approved for all the display types and configurations.
Hatteland Display's Compact Fanless series expanding HT B17, the smallest unit in our compact fanless series, is equipped in its basic configuration with the same high performance electronics as its larger sibling, HT B18. As with all Hatteland products, the HT B17 is made of standard modules, used across our product ranges. The benefit of having modular designs is used when we created the latest version of the HT B17, the "GE" version. We simply installed a proven Intel QM57 based mini-itx motherboard in our standard HT B17 chassis. This gave us upgraded performance in very short time, with less effort and with confidence. HT B17GE is designed with focus to the most common functional requirements found in marine applications. This gives a slim and cost effective solution without jeopardizing the extraordinary environmental performance that comes with the standard HT B17 versions. Please visit our website or contact us for complete specifications.
Hatteland Display's Compact Fanless series expanding HT B21 is the latest member of our compact fanless series. As default, it includes system digital IO's and communication interfaces designed for industrial and marine applications. Dual and redundant systems are implemented in the product to make it a perfect candidate for type approved systems in the marine industry. HT B21 is available in 2 basic versions: Intel Core 2 Duo / High Performance Intel Atom / Low Power Overview Hatteland Display - Compact Fanless Series: Model Platform Removeable HDD/SDD PCI / PCIE Dual Graphic Dual LAN COM Isolated I/O Isolated COM (option) CAN (option) HT B18 STD GM45+P8400 (2) 2 PCI AC+DC HT B17 STD GM45+P8400 1 AC+DC HT B17GE QM57+P4505 2 HD COM AC+DC HT B21EA GM45+P8400 (4) 1 HD COM 2 x DC HT B21FD Atom N450 1 HD COM 2 x DC PSU
General information Enhanced sunlight readability through in-house optical bonding Optical bonding greatly enhance the viewing performance, reliability and lifespan of marine displays. It is a process whereby the air gap between the front glass panel and LCD module is filled with a special proprietary compound to negate all of the problems related with marine use such as condensation, sunlight reflection, dust and overheating. Hatteland Display is dedicated to the art of LCD optical bonding. It is the only such inhouse facility of its kind at a marine display manufacturer, and it allows us to provide proprietary added value whilst ensuring the quality and integrity of our display products and technology. Hatteland Display ECDIS calibration Color calibration of the display is a very important aspect of ECDIS. ECDIS represents one of the most rigorous applications in display technology for our industry. The consequence of making an error in recognition on the display is potentially very costly, therefore it is important that ECDIS monitors match the colour characteristics specified in the relevant standards. Hatteland Display provides both computers and displays to facilitate an overall ECDIS approved installation. Production 2 high capacity production plants: Total 4800 m2 Approval ISO-9001:2008 Approved Hatteland Display is the leading technology provider of specialized display and computer products, delivering high quality, unique and customized solutions to the international maritime and industrial markets. The company represents innovation and quality to the system integrators world wide. Effective quality assurance and investment in sophisticated in-house manufacturing methods and facilities enable us to deliver Type Approved and Mil tested products. Our customer oriented approach, technical knowledge and dedication to R&D, make us a trusted and preferred supplier of approved solutions, which are backed up by a strong service network. Main Office Norway Hatteland Display AS Åmsosen N-5578 Nedre Vats, Norway Tel: +47 4814 2200 Fax: +47 5275 5444 mail@hatteland-display.com Hatteland Display also have sales offices in Norway, Germany, France and USA. To get an up-to-date list of our locations, please visit www.hatteland-display.com/locations Visions enewsletter: If you would like to receive it, sign up at www.hatteland-display.com/subscribe www.hatteland-display.com