FTIR-7600 FT-IR Spectrometer Accessories Price List 2011 Lambda Scientific Systems, Inc. Part # Description of Item Price (USD) 50 Magnetic Film/Pellet Holder (for 13 mm film/pellet samples) The Magnetic Film/Pellet Holder is used to mount KBr pellets and thin polymer films. Its components include a steel plate and flexible magnetic strip. The holder is designed to support 13 mm KBr pellets and films less than 0.5 mm thick. 65 161-2500 1100 Bolt Press for 13 mm pellets (Includes evacuable barrel, 2 anvil bolts, 2 15/16 wrenches and bolt press holder) The Bolt Press is a low-cost tool for making KBr pellets for transmission FTIR analysis. The press consists of a stainless steel barrel with two hardened and polished 13 mm bolts. The barrel is equipped with a fitting which allows evacuation of air while the pellet is formed. The pressure is applied to the sample by tightening the bolts against each other with standard 15/16" wrenches included. Once a clear pellet is formed, the bolts are removed and the sample is analyzed while still in the barrel (barrel is placed directly in the beam using the Press Holder with a standard 2" x 3" slide mount). It forms a 13 mm pellet and is equipped with a holder for your FTIR sample compartment. Demountable Liquid Cell (for window size 32 mm) (includes cell holder, gasket, and 1 set of spacers, must select minimum of 1 Plain and 1 Drilled windows below in order to operate). Options: select syringe below for filling the demountable liquid cell, and Teflon spacers. The Demountable Liquid Cell is ideal for qualitative and quantitative analysis of liquid samples where it is desirable to optimize the pathlength for varying samples. Furthermore the Demountable Liquid Cell is well suited for samples where it is useful to disassemble the cell for cleaning. A wide variety of window types and spacer pathlengths are available. Window types are available to cover mid-ir, NIR, and far-ir spectral regions and sample composition from organic to aqueous. 0 225
The Demountable Liquid Cell is designed with a standard 2" x 3" plate for use with all FTIR spectrometers. The needle plate includes Luer-Lok fittings for easy syringe filling of the sample. The window size is 32 x 3 mm and the clear aperture of the cell is 13 mm. Please select Glass Syringe: Glass Syringe, 1 ml Glass Syringe, 2 ml Glass Syringe, 5 ml Please select windows: Plain/Drilled BaF 2 183/ 208 CaF 2 106/ 124 Ge 198/ 216 KBr 40/ KRS-5 525/ 5 NaCL 41/ 44 Polyethylene 44/ 49 Si 265/ 282 ZnSe 317/ 337 Optional Teflon Spacers: diameter 32 mm, available thickness: 0.015, 0.025, 0.050, 0.100, 0.200, 0.500, and 1.000 mm, 12 pieces each set. 40 3600 Replacement: Teflon O-Rings, diameter 32 mm (12ea) Teflon Gaskets, diameter 32 mm (12ea) Teflon Stoppers for Needle Plate (12 ea) Dem Liq Cell-32 mm Needle Plate Press-On Demountable Liquid Cell Holder for 25 mm window) (includes cell holder, gasket, and O-ring, select minimum of 2 windows below in order to operate.) The Press-On Demountable Liquid Cell is recommended for fast and convenient qualitative analysis of viscous liquids and mull samples. Simply spot the sample onto the middle of the transparent IR window and slip the second window over the top. The windows are conveniently held in place by the friction fit of the Demountable Cell Holder. The Press-On Demountable Cell has optional Teflon spacers to assist with sampling pathlength. A wide variety of window types (25 x 4 mm) and spacer pathlengths are available to cover mid-ir, NIR, and far-ir spectral regions and sample composition from organic to aqueous. The Press-On Demountable Liquid Cell is designed with a standard 2" x 3" plate for use with all FTIR spectrometers. 60 100 Please select windows: BaF 2 142 CaF 2 89
.Ge 170 KBr 31 KRS-5 393 NaCL Polyethylene 41 Si 175 ZnSe 262 Optional Teflon Spacers: diameter 25 mm, available thickness: 0.015, 0.025, 0.050, 0.100, 0.200, 0.500, and 1.000 mm, 12 pieces each set. 2100 & 2150 Replacement Viton O-Rings, diameter 25mm (12ea) Short-Path EC Gas Cell, 100 mm path length (2100) Short-Path EC Gas Cell, 50 mm path length (2150) (includes glass body, o-rings and cell holder, must select 25 x 4 mm windows below, minimum of 2) The Short-Path EC Gas Cells are recommended for use with occasional gas sampling and offer an economical choice with standard septum-styled sealing of the vapor phase sample. They are available in 50 mm and 100 mm versions. The complete gas cell requires your selection of the appropriate IR transparent windows. The EC Gas Cells are slide mount accessories, compatible with all FTIR spectrometers. 295 Please Select Windows: Replacement: Viton O-Rings 25mm (2ea) Cell Window Cap (25 mm) Slide Holder - 25mm Gas Cell Glass Body for 100 mm Cell Glass Body for 50 mm Cell BaF 2 142 CaF 2 89 Ge 170 KBr 31 SiO 2 Call Si 175 ZnSe 262 20 65 105 105 5400 1 set of Sample Cards Polystyrene film card, (20 mm aperture), 10 pcs/set The Sampling Cards are inexpensive sample holders for analysis of films, polymers, 13 mm KBr pellets and other materials. Self-adhesive treated sides make sample preparation easy. The cards also offer compact and convenient means of sample storage. 20
111-3650 111-3660 Square Cuvette Cell Holder (10 x 10 mm) 70 Adjustable Cuvette Holder 10-100 mm 90 161-2540 2550 1201 1202 1205 011- Holder for 10-20 mm cylindrical cells (2540) Holder for 50-100 mm cylindrical cells (2550) Spacer for 1 mm Pathlength Cuvette (1201) Spacer for 2 mm Pathlength Cuvette (1202) Spacer for 5 mm Pathlength Cuvette (1205) Specular Reflectance Accessory ( degree) Slide-Mounted (Includes sample mask (3/8, ¼ and 3/16 ), alignment mirror and slide mount) The Spec is ideal for the measurement of relatively thick films by specular reflectance. Samples are simply laid across the top of the accessory and the spectrum of the film is measured within a short time period. The Spec includes sample masks of 3/8", 1/4" and 3/16" to define specific sampling areas. The Spec provides high quality FTIR spectra for identification of coatings and can also be used to measure coating thickness. IR throughput is high using the Spec due to the relatively simple optical design of the product. 75 75 750 Optical geometry for the Spec 2000 Comprehensive Transmission Sampling Kit for Gas, Liquid and Solid Sampling (Includes sample preparation tools, mull liquids, cells, windows and cell holders required for preparation and analysis of gas, solid and liquid samples) The CTS Kit includes a 100 mm long, 38 mm diameter gas cell, in addition to all the sample preparation and mounting tools described in the STS Kit. The cell body is made of Pyrex glass and features straight-tube inlet and outlet ports with stopcocks. The gas cell comes with all necessary gaskets, two KBr windows and slidemounted cell holder, and is designed for gas measurements at ambient temperature and normal atmospheric pressure. 2250
025- Lambda Scientific Systems, Inc. Universal ATR Base Optics /Platform Assembly (includes purge tubes, purge kit and base mount). Pressure Clamps (must select 1 or more for solids or polymer analysis) High-Pressure Clamp Digital Force Adapter for High-Pressure Clamp Micrometric, Low-Pressure Clamp Confined Space Clamp Notes: The High-Pressure Clamp is recommended for general applications. Pressure clamps include a flat tip, a swivel tip and a concave tip. The Digital Force Adapter requires High-Pressure Clamp. 1 Crystal Plates (must select 1 or more) Diamond/ZnSe Performance Crystal Plate Diamond/ZnSe/HS Performance Crystal Plate 3 Reflection Diamond/ZnSe Performance Crystal Plate ZnSe Performance Crystal Plate 3 Reflection ZnSe Performance Crystal Plate Ge Performance Crystal Plate Si Performance Crystal Plate Specular Reflection Performance Plate Notes: Crystal Plates are pre-aligned and pinned-inplace. Changing crystal plates is easy and fast to optimize sampling results. Crystal plates are manufactured using polished stainless steel for chemical resistance. The diamond/znse crystal plate is available with optional Hastelloy (HS) metal for exceptionally caustic or acidic samples. 4000 4000 5000 1800 10 1 750 ATR Accessory Specs: ATR Crystal Choices: Diamond/ZnSe, Ge, ZnSe, Si Crystal Plate Mounting: User changeable plates Crystal Plate Mount: Stainless steel Angle of Incidence: degrees, nominal Crystal Dimensions: Surface 1.8 mm Pressure Device: Rotating, continuously variable pressure. *If a proper accessory can not be found in the table, please contact us. PLEASE NOTE: 1. All prices above are Ex works Miami, FL (USA) and subject to change without notice. 2. Warranty period: 12 months from the date of delivery.