APPLICATIONS Air Conditioning Heating and ventilation Refrigeration Fire protection Plumbing Water Circulation Transfer and Irrigation Pressure Boosting Process Industries Water Treatment and Supply DESIGN FEATURES The use of standard motors allows for easy replacements. And this also means that the particular motors can be used to meet the application requirements. BPO design (Back-Pull-Out): allowing the removal of the complete rotating elements without disturbing the pipe work. This feature enables quick and simple maintenance to take place. Interchangeability. The modular design maximizes the interchangeability of the components, resulting in the reduction of spare parts and stock cost. Double shrouded hydraulically balanced impeller with balance holes. Wear rings are provided on both casings and back plates for all models. OPERATING TEMPERATURE With standard mechanical seal: o C With hard face seal: 60 o C OPERATING PRESSURE Maximum operating pressure 600Kpa Maximum testing pressure 00Kpa Maximum pressure will vary depending on particular pump model. SPECIFICATIONS Maximum flow: up to 00 L/S Maximum head: up to m Maximum working pressure: 6 bar on most models Direction of rotation: clockwise viewing from the drive end Technical Data for ISO Stream pumps Page
rpm SELECTION CHART H(m) Q(Imp.gpm) 00 0 000 0 0 00 H(ft) 00 60 0 5x-00 5x00-0 5x00-00 x5-0 00x-0 x5-00 00x-00 00 00 0 0 0 6 x0-5 x0- x0-00 x-00 x-60 x-60 x-5 x- x-00 x-60 00x-5 00x- 00x-00 00x-60 5x00-5 5x -5 5x00-5x - 5x -00 5x00-00 x5-5 x5-00x -5 x00-5 00 0 0 0 5 (L/s) 5 6 0 0 0 0 00 00 Q (Cum.m /h) 0 0 0 0 000 00 5 H(m) 00 Q(Imp.gpm) 900RPM SELECTION CHART 00 0 000 0 H(ft) 600 x0-5 x-5 00x-5 5x -5 0 00 00 x0- x- 00x- 5x00-00 60 x-00 x0-00 x-00 00x-00 5x- 5x00-00 00 0 x-60 5x-00 0 --60 x-60 00x-60 00 0 5 (L/s) 5 6 0 0 0 0 00 Q (Cum.m /h) 0 0 0 00 0 Technical Data for ISO Stream pumps Page
FLANGES DRILLED TO AS9-9 TABLE E DISCHARGE a f x h l h h SUCTION d b n Øs n n END ELEVATION m m w Øs PUMP SIZE x-60 x-00 SHAFT MODULE SUCTION DISCHARGE PUMP DIMENSIONS 5 5 60 60 00 00 FOOT DIMENSIONS 0 0 90 90 0 0 5 5 BOLT HOLES 00 00 SHAFT END a f h h b m m n n n h w s s x d l COUPLING KEY?? NET WEIGHT kg 9 x-60 x0-00 x0- x0-5 0 0 0 00 00 5 5 5 0 0 60 00 60 5 00 00 5 5 0 0 5 90 0 0 0 0 5 5 00 00 00 00?? 0X 0X 5 7 9 x-60 x-00 x- x-5 00 00 5 5 5 5 0 0 60 60 5 00 5 00 00 5 5 0 5 0 0 0 0 5 5 00 00 00 00?? 0X 0X 5 77 00x-60 00x-00 00x- 00x-5 00 00 00 00 00 00 5 5 0 0 0 50 60 00 5 00 5 5 5 60 60 0 0 0 60 00 5 0 0 0 0 6 00 0 0 0 0 0X 0X 0X X 69 7 6 5x-00 5x- 5x-5 5x-00 00 00 00 00 5 5 5 5 0 0 50 50 5 5 55 5 60 60 60 0 0 0 5 00 00 5 5 5 55 0 0 0 0 6 0 0 0 0 0 0 0 0 0 0 0X 0X X X 90 5x00-00 5x00-5x00-5 5x00-00 5x00-0 x5- x5-5 x5-00 x5-0 5 00 5 0 00 60 0 60 0 5 5 5 5 00 00 00 00 0 0 0 60 50 50 50 6 5 55 5 55 00 00 60 60 00 00 0 0 00 00 0 5 5 5 00 0 0 0 0 0 5 0 0 0X 9 0 0 0 0 0 0 0 X X X x9 5 0 50 55 60 0 00 5 0 0 0 0 X 9 5 5 5 0 0 60 50 50 6 5 55 55 00 00 00 00 00 00 00 0 0 5 00 00 0 0 0 0 5 0 0 0 0 0 0 X X x9 60 9 5 0 00x-5 00x-00 00x-0 x00-5 x00-00 00 60 6 5 00 00 00 5 0 5 0 0 x9 7 00 60 6 5 00 00 5 0 5 0 0 x9 9 00 60 6 00 0 00 00 5 0 5 0 0 x9 0 00 6 5 00 00 5 0 5 0 0 x9 0 00 6 55 0 00 00 5 0 5 0 0 x9 Technical Data for ISO Stream pumps Page
ssateiso STREAM MMateTechnical Data for ISO Stream pumps Page rialsofconstructionriaparts Name Casing Impeller Wear Ring Shaft Shaft Nut Shaft Sleeve Lantern Ring Gland lmaterial CAST IRON BRONZE STAINLESS STEEL pecificfitted Cast lron All lron Cast lron sbronze Cast lron Cast lron Bronze Cast lron Cast lron Cast lron Cast lron Cast lron Stainless Steel Stainless Steel Stainless Steel Bronze Bronze Cast lron Stainless Steel Stainless Steel Stainless Steel Bronze Cast lron Cast lron Cast lron Cast lron Cast lron ationnearset EQUIVALENT STANDARD AUSTRALIAN BRITISH AMERICAN DIN AS 0/T00 AS 5/6B AS GR 0 BS5: GR 0 BS00: GR 0 BS 9: 0/S7 ASTM A CLASS 0 ATSM B5 CDA6 AISI-0 DIN 69 GG 0 DIN 5 DIN Bearings should be lubricated approximately every 000 operating hours at 600 rpm,0 operating hours at 000 rpm,000 operating hours at 0 rpm,00 operating hours at 0 rpm with following or equivalent grease. SHELL ALVANIA R MOBIL MOBILUX AMPOL R R B.P. ENERGREASE LS CALTEX MULTIFAX
Wear Rings and Bolted Arrangement Pump Models Applicable x-60 x-60 x-60 00x-60 00x-00 5x00-00 5x00- x5-00x-5 5x00-5 x5-5 00x-5 x00-5 - 90-0-0 - -0 Pumps with mechanical seal backcovers 6-9-0 90- -7 90-9- - 5- - -0 0-90-5-5 9-0 6-0 9- -7 90- - - 6-0-0 5-90- - 9-0 PART NO. 0- - 0-0 90- - 9- -7-0 90-9-0-90- - 90-6- 5-90-5-5 DESCRIPTION Pump Casing Case Wear Ring Dowel Casing O-Ring Drain Plug Vent Plug Impeller Stud Nut Support Foot Gauge Plug Bolts Casing Cover Seal Rotating Gauge Plug QTY / / PART NO. 6-5- -0 6-0 0-0 - - - 9-0 9-0 9- -7 90- Mechanical Seals: shaft module : mm shaft module : mm shaft module : 5mm shaft module : 60mm DESCRIPTION Seal Stationary Wear Ring Bearing Housing Bearing Cover Gasket Oil Seal Bearing Shaft Coupling Key Impeller Key Impeller Nut Thrower Bolts QTY. Technical Data for ISO Stream pumps Page 5
Wear Rings and Bolted Arrangement Pumps with mechanical seal backcover Pump Models Applicable x-00 x0-00 x-00 x0- x- 00x- x0-5 x-5 5x-00 5x00-00 x5-00 5x00-0 x5-0 00x-0 00x-00-90- 0-0 - 5-9-0 90-5- 6-9- -7 90- - 9-0 90-5 -5 9-0 0- - 6-0 9- PART NO. 0- - 0-0 90- - 90-9-0-0 9- -7-90- 90- - DESCRIPTION Pump Casing Casing Wear Ring Dowel -0 QTY Casing O-ring Drain Plug Studs Nuts / / Impeller Vent Plug - Support Foot Gauge Plug 90- Bolts 6- Casing Cover Dowel 5- Wear Ring 90-5 -5 Gauge Plug -7 90-9-0 6-0-0-0 90- - - PART NO. DESCRIPTION QTY. 6- Seal Rotating 5- Seal Stationary 90- Studs /6 9-0 Nuts /6-0 Bearing Housing 6-0 Bearing Cover 0-0 Gasket - Oil Seal - Bearing - Shaft 9-0 Coupling Key 9-0 Impeller Key 9- Impeller Nut -7 Thrower 90- Bolts /6 Mechanical Seals: shaft module : mm shaft module : mm shaft module : 5mm shaft module : 60mm Technical Data for ISO Stream pumps Page 6
PUMP SIZE PARTS DESCRIPTION ITEM NO QTY PER UNIT x-60 x-60 x-60 00x-60 00x-00 5x00-00 5x00- x5-00x-5 5x00-5 x5-5 00x-5 x00-5 HYDRAULIC ASSEMBLY PUMP CASING WEAR RING*** DOWEL CASING O-Ring DRAIN PLUG VENT PLUG IMPELLER STUD NUT SUPPORT FOOT GAUGE PLUG BOLTS (Mx0) GAUGE PLUG 0- - 0-0 90- - 9- -7-0 90-9-0-90- - 90-90-5-5 5 6 7 9 0 5 7 7 9 0 5 6 BSP/" BSP/" 5 6 7 9 0 Mx60 M0x55 M0x55 M0x M M0 M0 M0 /" BSP Mx0 /" BSP *** CASING COVER ASSEMBLY CASING COVER WEAR RING*** 6-5- 5 6 7 5 7 5 7 9 0 *** BEARING HOUSING BEARING COVER GASKET OIL SEAL BEARING SHAFT COUPLING KEY IMPELLER KEY IMPELLER NUT THROWER BOLTS -0 6-0 0-0 - - - 9-0 9-0 9- -7 90- BEARING HOUSING ASSEMBLY 6 Mx5 M0x5 Mx5 Note: Wear Ring ID: =Ø9; =Ø05; =Ø5; =Ø; 5=Ø60; 6=Ø; 7=Ø6; =Ø00.5; 9=Ø5.5; 0=Ø.5 O-Ring Dimensions: =5x.55; =0x.55; =x.55; =5x.55; 5=0x.55; 6=5x7; 7=7x7; =55x7 Technical Data for ISO Stream pumps Page 7
PUMP SIZE PARTS DESCRIPTION ITEM NO QTY PER UNIT x-00 x0-00 x-00 x0- x- 00x- x0-5 x-5 5x-00 5x00-00 x5-00 00x-00 5x00-0 x5-0 00x-0 PUMP CASING WEAR RING*** DOWEL CASING O-RING*** DRAIN PLUG VENT PLUG IMPELLER STUD NUT SUPPORT FOOT GAUGE PLUG BOLTS GAUGE PLUG 0- - 0-0 90- - 9- -7-0 90-9-0-90- - 90-90-5-5 HYDRAULIC ASSEMBLY /6 /6 5 6 7 9 0 5 7 9 6 9 5 9 BSP/" BSP/" 5 6 7 9 0 5 M0x5 -Mx5 6-Mx M0 -M 6-M 5 6 7 M x 0 /" BSP CASING COVER WEAR RING*** NUTS 6-5- STUDS 90-9-0 CASING COVER ASSEMBLY 5 6 7 7 7 7 9 6 9 Mx5 M0x5 Mx5 M0x M M0 M M0 BEARING HOUSING BEARING COVER GASKET OIL SEAL BEARING (refer to other information) SHAFT COUPLING KEY IMPELLER KEY IMPELLER NUT THROWER BOLTS Note: Wear Ring ID: =Ø9; =Ø05; =Ø5; =Ø; 5=Ø60; 6=Ø; 7=Ø6; =Ø00.5; 9=Ø5.5; 0=Ø.5-0 6-0 0-0 - - - 9-0 9-0 9- -7 90- BEARING HOUSING ASSEMBLY 6 Mx5 M0x5 Mx5 O-Ring Dimensions: =5x.55; =0x.55; =x.55; =5x.55; 5=0x.55; 6=5x7; 7=7x7; =55x7 Technical Data for ISO Stream pumps Page
Basic Operating Limits PRESSURE TEMPERATURE MAXIMUM OPERATING PRESSURE MAXIMUM HYDROSTATIC TEST PRESSURE MAXIMUM SUCTION PRESSURE rpm MAXIMUM SUCTION PRESSURE 900 rpm -0? to 05 癈 Packed Gland N/A Mech.Seal 00 kpa 00 kpa 0 kpa 600 kpa MAXIMUM SPEED 600 rpm REFER TO SPECIFIC MODEL FOR EXACT LIMITS Maximum Working and Test Pressures PUMP MODEL x-60 x-00 HYDROSTATIC TEST PRESSURE (MAX).0.0 00 00 MAX. WORKING PRESSURE BAR kpa BAR kpa mm 6.0 6.0 600 600 MAX. SPEED 600 600 FULL IMPELLER DIAMATER x-60 x0-00 x0- x0-5.0.0.0.0 00 00 00 00 6.0 6.0 6.0 6.0 600 600 600 600 600 600 600 9 7 x-60 x-00 x- x-5.0.0.0.0 00 00 00 00 6.0 6.0 6.0 6.0 600 600 600 600 600 600 600 9 7 00x-60 00x-00 00x- 00x-5.0.0.0.0 00 00 00 00 6.0 6.0 6.0 6.0 600 600 600 600 600 600 600 9 7 5x-00 5x- 5x-5 5x-00.0.0.0.0 00 00 00 00 6.0 6.0 6.0 6.0 600 600 600 600 9 9 9 00 7 5x00-00 5x00-5x00-5 5x00-00.0.0.0.0 00 00 00 00 6.0 6.0 6.0 6.0 600 600 600 600 9 9 0 00 600 5x00-0 7..0 00 57 x5- x5-5 x5-00 x5-0.0.0.0 7. 00 00 00 6.0 6.0 6.0.0 600 600 600 00 600 00 000 600 7 57 00x-5 00x-00.0.0 00 00 6.0 6.0 600 600 00 0 00x-0 6. 60 0.0 000 600 57 7 x00-5 x00-00.0.0 00 00 6.0 6.0 600 600 0 600 Technical Data for ISO Stream pumps Page 9
ØD Impeller Coupling End Bearing Coupling End 606 607 60 609 60 6 Y X ØB ØC ØA Shaft Module Shaft Module Shaft Module Shaft Module Shaft Module 6 6 X (mm) Y (mm) A (mm) B (mm) C (mm) D (mm) 7 7 5 5 5 5 0 56 66 5 5 9 96 7 60 5 Technical Data for ISO Stream pumps Page 0
Shaft Dimensions KEY LENGTH KEY WIDTH KEY HEIGHT SEAT DEPTH Dd SHAFT MODULE DIAMETER d NOM TOL KEY LENGTH KEY HEIGHT KEY WIDTH KEY DEPTH +0.0 0 7 0-0.0 +0.0 55 0 7 0 +0.0 7 0 +0.0 9.5 0 Key dimensions are nominal. Dimensions in mm. b d k D Flange Data BRANCH SIZE 0 00 5 00 FLANGE DRILLING * D b No. d k 0 5 00 0 5 0 0 0 6 6 7 9 7 6 7 0 5 9 BOLTING M M M6 M6 M6 M6 M6 M0 M0 05 56 M0 d Flange Dimenslons and drilling to AS9 Table E Holes-Equally spaced straddling pump centreline. ROTATION Service Connections A B* D DD S A B* D DD S s PUMP MODEL CASING DRAIN HOUSING DRAIN GAUGE VENT GAUGE PUMP MODEL CASING DRAIN HOUSING DRAIN GAUGE VENT GAUGE A END ELEVATION DISCHARGE D DD SUCTION B * SIDE ELEVATION Left side viewed from suction x-60 x-00 x-60 x0-00 x0- x0-5 x-60 x-00 x- x-5 00x-60 00x-00 00x- 00x-5 5x-00 5x00-00 5x00-5x00-5 5x00-00 5x00-0 x5- x5-5 / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP x5-00 x5-0 00x-5 00x-00 00x-0 x00-5 / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP / BSP Note: all service connections are BSP female parallel thread. Technical Data for ISO Stream pumps Page