have everything in sight 2011

Inspired by comfort have everything in sight 2011 -monitor systems for professionals CRT reversing video systems LCD reversing video systems s for navigation / reversing video systems Interior surveillance cameras Heavy-duty reversing video system components

2 -monitor systems -monitor systems 360 vision for professionals Professional drivers generally have no problems manœuvring their vehicles in tight spaces. Never theless there are certain situations when an extra pair of eyes would be invaluable. For example when reversing towards an unfamiliar loading ramp or when turning right and cyclists disappear into the blind spot. With WAECO PerfectView you can make vehicles safe and secure all around. s to the front and back, on both sides and even inside, CRT and LCD monitors, complete systems and single components, standard and heavy-duty... there s a professional solution for every demand. The WAECO PerfectView range was conceived as a modular system with a consistent cable and connector system. This allows a whole host of combination and upgrading options. Contents, specifications and availability are subject to change serving the technical improvement.

-monitor systems 3 CRT reversing video systems Robust, reliable, tried and tested a hundred thousand of times for over ten years now: PerfectView CRT reversing video systems give your customers big performance at a small price! LCD reversing video systems Advanced technology, safety in line with current standards. Take your pick from a wide range of products: inexpensive entry-level systems, high-end models for ultimate demands, EU-certified front camera/reversing video system. PerfectView CRT Pages 8 11 PerfectView RVS PerfectView FVS Pages 12 25 PerfectView CRT 580 PerfectView RVS 560 s for navigation / reversing video systems Accessories for reversing video systems Simple upgrading: these cameras can be used to turn a navigation device into a fully-fledged reversing video system. They can also be added to an existing camera-monitor system. Cable sets for fast installation of cameras and complete systems on trailers or semi-trailers. Also on offer: cables, adapters, video splitter, switchbox. PerfectView CAM Pages 26 30 PerfectView Pages 31 34 PerfectView CAM 80NAV PerfectView Accessory Trailer cable set Interior surveillance cameras Inconspicuous observers: WAECO PerfectView dome cameras keep a watchful eye on safety-relevant areas in public transport vehicles, buildings or machine halls. Heavy-duty reversing video system components Vibration, impact, moisture, dust these and other tough conditions call for our PerfectView heavy-duty components. s, cameras and accessories for custom vehicle design. PerfectView Pages 35 37 PerfectView Pages 38 47 PerfectView CAM 12 PerfectView M 59L vehicle-construction.dometic-waeco.com

4 -monitor systems Professional perfect view solutions Ready-to-install systems for every demand Perfect picture quality in three versions WAECO PerfectView LCD monitors WAECO PerfectView LCD monitors feature advanced LED background illumination for excellent picture quality, even when temperatures are low. Moreover, they have a long service life and consume little energy. A practical detail is the Easylink mount. The M 5L and M 7L models (identical in construction except for the screen diagonal size of 5" or 7") have two camera inputs with separate controls. The M 7LX high-end model stands out with its three independently programmable camera inputs and adjustable OSD distance marks. LED background illumination for optimal picture quality, even when temperatures are low Two or three camera inputs (with separate controls) Detachable monitor USB charger port For 12 to 30 volts operating voltage (input circuit with overvoltage protection) EMC interference resistance according to Volvo standard WAECO WAECO Easylink monitor mount Ideal when a monitor is used in various vehicles of a fleet, or for anti-theft protection: the monitor can be detached with a click and attached again just as quickly. The base is firmly anchored in the dashboard. Easylink monitor mount: Docking station for theft prevention USB port for charging MP3 players and the like System cables with threaded connectors PerfectView M 7LX with 3 camera inputs and adjustable OSD distance marks Contents, specifications and availability are subject to change serving the technical improvement.

-monitor systems 5 Perfectly equipped: WAECO PerfectView cameras WAECO PerfectView CAM 50C camera Compact colour camera with extra-low mount and concealed cable routing Wide-angle lens with large picture angle (120 diagonal) Included in the following systems: PerfectView RVS 550 (with monitor M 5L), RVS 750 (with monitor M 7L) and RVS 750X (with monitor M 7LX) WAECO PerfectView CAM 80CM shutter camera Super-compact colour camera Automatic, motor-operated shutter to prevent soiling of the camera lens Wide-angle lens with large picture angle (145 diagonal) Included in the following systems: PerfectView RVS 580 (with monitor M 5L), RVS 780 (with monitor M 7L) and RVS 780X (with monitor M 7LX) WAECO PerfectView CAM 33C1 twin camera with shutter 2 separate camera modules for optimal close- and long-range vision Automatic, motor-operated shutter to prevent soiling of the camera lens Large picture angle in close range (140 diagonal), undistorted pictures in long range (40 diagonal) Included in the following systems: PerfectView RVS 590 (with monitor M 5L) and RVS 790 (with monitor M 7L) WAECO PerfectView CAM 40 ball camera Super-compact design, high vibration resistance Excellent light sensitivity and resolution Wide-angle lens with large picture angle (130 diagonal) Included in the EU-certified front camera/reversing video system FVS 740X (with monitor M 7LX) WAECO PerfectView CAM 16BK cylinder camera in brake light console Special model with console for installation on the original brake light Wide-angle lens with large picture angle (150 diagonal) Included in the following systems: PerfectView RVS 560 (with monitor M 5L) WAECO PerfectView CAM 30CK ball camera in roof-mount housing Special model with roof-mount housing for installation on panel vans Wide-angle lens with large picture angle (120 diagonal) Included in the following systems: PerfectView RVS 530 (with monitor M 5L) vehicle-construction.dometic-waeco.com

6 Reversing video systems Decision aid WAECO PerfectView complete systems at a glance CRT reversing video systems 4.5" / 115 mm 5" / 128 mm System CRT 245 CRT 580 RV-245 9101900007 M 45R M 50R1 5" LCD reversing video systems 5" / 128 mm 5" / 128 mm 5" / 128 mm 5" / 128 mm 5" / 128 mm RVS 530 RVS 550 RVS 560 RVS 580 RVS 590 9101900034 9101900009 9101900035 9101900020 9101900021 NEW NEW M 5L M 5L M 5L M 5L M 5L 7" 4.5" 5" Operating voltage 11 to 32 volts DC 11 to 32 volts DC Power input 10 watts 12 watts 350 lines 520 lines LED background illumination CCIR EIA Number of camera inputs 1 2 Day / night dimmer Sun blind Distance scale foil Loudspeaker Vibration resistance 5 g 4 g Temperature range 20 to +60 C 20 to +60 C CAM 10 CAM 80 12 to 30 volts DC 12 to 30 volts DC 12 to 30 volts DC 12 to 30 volts DC 12 to 30 volts DC 10 watts 10 watts 10 watts 10 watts 10 watts 235,000 pixels 235,000 pixels 235,000 pixels 235,000 pixels 235,000 pixels NTSC / PAL auto NTSC / PAL auto NTSC / PAL auto NTSC / PAL auto NTSC / PAL auto 2 2 2 2 2 automatic via LDR automatic via LDR automatic via LDR automatic via LDR automatic via LDR 5 g 5 g 5 g 5 g 5 g 20 to +60 C 20 to +60 C 20 to +60 C 20 to +60 C 20 to +60 C CAM 30CK CAM 50C CAM 16BK CAM 80CM CAM 33C1 Picture sensor CCD chip 1/4" 1/3" 380 lines 270,000 pixels Picture angle 98 / 82 / 120 100 / 72 / 145 horizontal / vertical / diagonal Light sensitivity < 0,5 lux or 0 lux with LED < 0,5 lux or 0 lux with LED CCIR EIA Electronic brightness adjustment IR LED technology for optimum night-time vision Integrated microphone Heating Motor-operated camera shutter Vibration resistance 8 g 6 g Type of protection IP 68 IP 68 real-view picture Temperature range 10 to +60 C 20 to +65 C 1/4" 1/4" 1/4" 1/3" 1/3" 270,000 pixels 270,000 pixels 270,000 pixels 270,000 pixels 290,000 pixels 90 / 70 / 120 90 / 70 / 120 102 / 73 / 150 100 / 72 / 145 100 / 72 / 140 32 / 28 / 40 < 1 lux or 0 lux with LED < 1 lux or 0 lux with LED < 1 lux < 1 lux or 0 lux with LED < 1 lux or 0 lux with LED PAL PAL PAL PAL PAL 8 g 6 g 6 g 6 g 6 g IP 68 IP 69K IP 68 IP 68 IP 68 factory-preset mirrored picture 20 to +65 C 20 to +65 C 20 to +65 C 20 to +65 C 20 to +65 C Applications Contents, specifications and availability are subject to change serving the technical improvement.

Reversing video systems 7 Black and white or colour? CRT tube monitor or LCD flat screen? Video only or video and audio? Check the table below to find your ideal system. There are also some extras for heavy-duty use, e.g. cameras with heater, motoroperated shutter or infrared LED for enhanced night-time vision. 7" LCD reversing video systems FVS 740X: EU-certified front camera/ reversing video system 7" / 178 mm 7" / 178 mm 7" / 178 mm 7" / 178 mm 7" / 178 mm 7" / 178 mm System RVS 750 RVS 780 RVS 790 RVS 750X RVS 780X RVS 740X 9101900022 9101900024 9101900016 9101900010 9101900008 9101900023 M 7L M 7L M 7L M 7LX M 7LX M 7LX Operating voltage 12 to 30 volts DC 12 to 30 volts DC 12 to 30 volts DC 12 to 30 volts DC 12 to 30 volts DC 12 to 30 volts DC Power input 12 watts 12 watts 12 watts 12 watts 12 watts 12 watts 337,000 pixels 337,000 pixels 337,000 pixels 337,000 pixels 337,000 pixels 337,000 pixels LED background illumination NTSC / PAL auto NTSC / PAL auto NTSC / PAL auto NTSC / PAL auto NTSC / PAL auto NTSC / PAL auto Number of camera inputs 2 2 2 3 3 3 Day / night dimmer automatic via LDR automatic via LDR automatic via LDR automatic via LDR automatic via LDR automatic via LDR Sun blind Distance scale OSD OSD OSD Loudspeaker Vibration resistance 5 g 5 g 5 g 5 g 5 g 5 g Temperature range 20 to +60 C 20 to +60 C 20 to +60 C 20 to +60 C 20 to +60 C 20 to +60 C CAM 50C CAM 80CM CAM 33C1 CAM 50C CAM 80CM CAM 40 Picture sensor CCD chip 1/4" 1/3" 1/3" 1/4" 1/3" 1/3" 270,000 pixels 270,000 pixels 290,000 pixels 270,000 pixels 270,000 pixels 290,000 pixels Picture angle 90 / 70 / 120 100 / 72 / 145 100 / 72 / 140 90 / 70 / 120 100 / 72 / 145 90 / 70 / 130 horizontal / vertical / diagonal 32 / 28 / 40 Light sensitivity < 1 lux or 0 lux with LED < 1 lux or 0 lux with LED < 1 lux or 0 lux with LED < 1 lux or 0 lux with LED < 1 lux or 0 lux with LED < 0,1 lux or 0 lux with LED PAL PAL PAL PAL PAL PAL Electronic brightness adjustment IR LED technology for optimum night-time vision Integrated microphone Heating Motor-operated camera shutter Vibration resistance 6 g 6 g 6 g 6 g 6 g 10 g Type of protection IP 69K IP 68 IP 68 IP 69K IP 68 IP 68 factory-preset mirrored picture Temperature range 20 to +65 C 20 to +65 C 20 to +65 C 20 to +65 C 20 to +65 C 20 to +65 C Applications vehicle-construction.dometic-waeco.com

8 CRT reversing video systems Safe manœuvring at an entry-level price Proven basic system with compact ball camera The WAECO PerfectView CRT 245 reversing video system gives you an edge with pragmatic customers. It offers all the essential basic functions as well as an outstanding cost/benefit ratio. The tried and tested basic system combines the sturdy b/w CRT monitor M 45R with the super-compact ball camera PerfectView CAM 10. Featuring LED technology this camera delivers crystal-clear pictures, even in complete darkness. Its cabinet complies with IP 68 standards which means it is dust- and waterproof and thus fit for use in tough environments. Ready for connection to 12 / 24 volts. CRT 245 is suitable for: Contents, specifications and availability are subject to change serving the technical improvement.

CRT reversing video systems 9 WAECO PerfectView CRT 245 3.19 Reversing video system with 4.5" CRT monitor and b/w ball camera Basic system with all standard functions Compact ball camera with LED 4.5" b/w CRT monitor M 45R Switches on automatically Automatic day / night adjustment 1 camera input Anti-dazzle sunshield Distance marks on adhesive film Technical data M 45R Dimensions (W x H x D) 160 x 140 x 156 mm (incl. mount) Diagonal screen dimension 4.5" / 115 mm (visible picture) Operating voltage 11 to 32 volts DC Power consumption 10 watts 350 lines CCIR Operating temperature 20 C to +60 C Vibration resistance 5 g 1000 g b/w ball camera CAM 10 4.5" b/w IP 68 Anodised, die-cast, water-proof aluminium cabinet LDR controlled IR LEDs Wide-angle lens with large picture angle (120 diagonal) Technical data CAM 10 Dimensions (W x H x D) 69.5 x 66 x 55 mm (incl. mount) Power consumption approx. 1.0 watts Picture sensor 1/4" CCD sensor 380 lines Picture angle 120 diagonal h: approx. 98 v: approx. 82 Light sensitivity < 0.5 lux or 0 lux with LED CCIR Operating temperature 10 C to +60 C Vibration resistance 8 g 300 g Type of protection IP 68 160 156 140 69.5 55 66 Scope of delivery: 4.5" b/w CRT monitor, b/w ball camera, 20 m monitor-to-camera connection cable, set of cables for monitor, installation fittings for all components, anti-dazzle sunshield PerfectView CRT 245 RV-245 vehicle-construction.dometic-waeco.com

10 CRT reversing video systems Designed for heavy-duty needs classic with motor-operated shutter with 145 picture angle The PerfectView CRT 580 reversing video system has safety features that soon pay off in heavy-duty service. The motor-operated camera shutter protects the lens from dirt and damage during the drive and gives a clear view of the rear at any time. The compact b/w camera excels with an extralarge picture angle of 145 and a 1/3" Sony CCD image sensor. For enhanced night-time vision, the infrared LEDs are fitted in a separate window, which avoids reflection. The temperature controlled heater prevents condensation build-up inside the camera and ensures fast image display on the screen when temperatures are low. WAECO PerfectView CRT 580 is ready for connection to 12 / 24 volts. PerfectView Accessory cable kits Ordering is easy: WAECO offers pre-configured cable kits for the two most common towing systems, truck/trailer or tractor/trailer. Details on pages 31/32. CRT 580 is suitable for: Contents, specifications and availability are subject to change serving the technical improvement.

CRT reversing video systems 11 WAECO PerfectView CRT 580 3.19 Reversing video system with 5" CRT monitor and b/w shutter camera Successor of the tried and tested CRT 100 system with motor-operated shutter and heated electronics Supersmall camera 5" b/w CRT monitor M 50R1 For 12-volt and 24-volt operating voltage Two camera sockets (EIA) Day / night adjustment of picture brightness, automatically or manually Switches on automatically or by manual operation Contrast / brightness adjustment Technical data M 50R1 Dimensions (W x H x D) 187 x 163 x 201 mm (incl. mount) Diagonal screen dimension 5" / 128 mm (visible picture) Operating voltage 11 to 32 volts DC Power consumption 12 watts 520 lines EIA Operating temperature 20 C to +60 C Vibration resistance 4 g 1300 g Picture brightness 200 cd/m² b/w shutter camera CAM 80 5" IP 68 b/w SHUTTER Real-view picture function Automatic, motor-operated shutter to prevent soiling of the camera lens Anodised and powder-coated aluminium housing with protective cap and mount in stainless steel Temperature controlled heater Electronic brightness adjustment LDR controlled IR LEDs Wide-angle lens with large picture angle (145 diagonal) Technical data CAM 80 Dimensions (W x H x D) 106 x 68 x 54 mm (incl. mount) Operating voltage 11 to 16 volts DC Power consumption 1.8 watts (with heater) Picture sensor 1/3" SONY CCD 270,000 pixels Picture angle 145 diagonal h: approx. 100 v: approx. 72 Light sensitivity < 0.5 lux or 0 lux with LED EIA Operating temperature 20 C to +65 C Vibration resistance 6 g 350 g Brightness adjustment electronic real-view picture Type of protection IP 68 Scope of delivery: 5" b/w CRT monitor, b/w shutter camera, 20 m monitor-to-camera connection cable, set of cables for monitor, installation fittings for all components, anti-dazzle sunshield 163 68 PerfectView CRT 580 9101900007 187 201 106 54 Optional extra: Heavy-duty spiral cable set SPK 160 for trailers incl. sockets (compatible with spiral cable RV-100SPK up to 2009) 9102200077 with motor-operated shutter Matching accessories for reversing video systems e.g. for connection of an additional camera can be found on pages 26 34. vehicle-construction.dometic-waeco.com

12 LCD reversing video systems Custom solutions for panel vans With special camera for brake light or roof mounting Many panel vans just don t have a suitable mounting surface for a camera on the rear. The obvious alternative is to fasten the camera on the roof, or to the original brake light. For either case the WAECO PerfectView range offers a convincing, aesthetically pleasing solution combined with with the 5" LCD monitor PerfectView M 5L. Our custom solution for VW Crafter and Mercedes Sprinter is based on the compact ball camera CAM 30CK, which is enclosed in a roof-mount housing that protrudes slightly over the vehicle rear. An angular adapter for universal installation on other vehicle models is included in the set. For Fiat Ducato X250 and its sister models Citroën Jumper and Peugeot Boxer we conceived the custom camera CAM 16BK. The small cylinder camera is enclosed in a console which is simply attached to the vehicle s original brake light. Its light-sensitive 150 wide-angle lens, combined with the 5" LCD monitor PerfectView M 5L, provides manœuvring safety at its best. Note: Both special cameras are also available as single components e.g. for connection to existing navigation systems. Order information on p. 29. Once exactly adjusted the camera s 120 wide-angle lens will optimally capture the area to the rear. The optical parameters of the CAM 30CK (LDR-controlled infrared LEDs, electronic brightness adjustment, 1/4"- CCD image sensor) make for excellent image quality. Especially so as it is combined with the 5" LCD monitor PerfectView M 5L features, which displays brilliant pictures thanks to its LED background illumination. RVS 530 / RVS 560 are suitable for: Contents, specifications and availability are subject to change serving the technical improvement.

LCD reversing video systems 13 WAECO PerfectView RVS 530 3.19 Reversing video system with 5" LCD monitor and colour ball camera in roof-mount housing WAECO PerfectView RVS 560 Reversing video system with 5" LCD monitor and colour cylinder camera in brake light console 5" LCD colour monitor M 5L M 5L With infrared LED! For 12-volt and 24-volt operating voltage Switches on automatically or by manual operation Automatic day / night adjustment 235,000 pixels 2 camera inputs with separate controls Image settings can be saved for either camera Loudspeaker USB port for recharging of MP3 players, etc. LED background illumination Technical data M 5L Dimensions (W x H x D) 144 x 128 x 120 mm (incl. mount) Diagonal screen dimension 5" / 128 mm (visible picture) Operating voltage 12 to 30 volts DC Power input 10 watts 235,000 pixels PAL / NTSC auto Operating temperature 20 C to +60 C Vibration resistance 5 g 300 g Picture brightness 400 cd/m² Dimmer automatic via LDR inputs 2 with signal recognition PerfectView RVS 530 (M 5L monitor and CAM 30CK colour ball camera in roof-mount housing) 5" AUDIO IP 68 CAM 30CK CAM 30CK colour ball camera in roof-mount housing CCD camera (PAL) with LED For roof mounting on panel vans that do not have a suitable surface to mount a camera on the rear Fits VW Crafter, Mercedes Sprinter (other vehicle models with universal adapter) Sturdy, water-proof aluminium housing Microphone Electronic brightness adjustment LDR controlled IR-LEDs Wide-angle lens with large picture angle (120 diagonal) Technical data Dimensions (W x H x D) Operating voltage Power input Picture sensor Picture angle Light sensitivity Operating temperature Vibration resistance CAM 30CK 130 x 84 x 250 mm (incl. housing) 11 to 16 volts DC approx. 1.8 watts 1/4" CCD sensor 270,000 pixels 120 diagonal h: approx. 90 v: approx. 70 < 1 lux or 0 lux with LED PAL 20 C to +65 C silver/anthracite 8 g 200 g Brightness adjustment electronic Type of protection IP 68 M 5L PerfectView RVS 560 (M 5L monitor and CAM 16BK colour cylinder camera in brake light console) 5" CAM 16BK CAM 16BK colour cylinder camera in brake light console cylinder camera (PAL) To be fitted on the original brake light of Fiat Ducato X250, Citroën Jumper, Peugeot Boxer Excellent light sensitivity Electronic brightness adjustment Wide-angle lens with large picture angle (150 diagonal) Technical data Dimensions (W x H x D) Operating voltage Power input Picture sensor Picture angle Light sensitivity CAM 16BK 330 x 100 x 70 mm (incl. housing) 11 to 16 volts DC approx. 1.0 watts 1/4" CCD sensor 270,000 pixels 150 diagonal h: approx. 102 v: approx. 73 < 1 lux PAL Operating temperature 20 C to +65 C Vibration resistance Brightness adjustment silver/white 6 g 200 g electronic Type of protection equivalent to IP 68 144 128 120 Scope of delivery RVS 530: 5" LCD colour monitor incl. Easylink monitor mount, colour ball camera roof-mount housing and angular adapter for universal installation, 20 m monitor-tocamera connection cable, set of cables for monitor, installation fittings for all components, anti-dazzle sunshield 250 130 84 330 70 100 Scope of delivery RVS 560: 5" LCD colour monitor incl. Easylink monitor mount, colour cylinder camera incl. brake light console, 20 m monitor-to-camera connection cable, set of cables for monitor, installation fittings for all components, anti-dazzle sunshield PerfectView RVS 530 9101900034 PerfectView RVS 560 9101900035 vehicle-construction.dometic-waeco.com

14 LCD reversing video systems Good quality, nice price: the LCD compact class 5" colour monitor + two camera versions High-quality components, state-of-the-art technol ogy: the WAECO PerfectView 5" compact class offers outstanding value for money. The 5" LCD colour monitor PerfectView M 5L stands out with its elegant design and brilliant picture quality. On top of that, it comes with some useful extras: automatic recognition of a trailer camera, two video inputs with separate controls, practical Easylink monitor mount (see page 4). The compact PerfectView CAM 50C colour camera yields a comfortable picture angle of 120 and is fitted with infrared LEDs, temperature controlled heating and a microphone. As an alternative to the silver cabinet we offer a same-build model in white (CAM 50CW). PerfectView Accessory cable kits Ordering is easy: WAECO offers pre-configured cable kits for the two most common towing systems, truck/trailer or tractor/trailer. Details on pages 31/32. RVS 550 / RVS 550W are suitable for: Contents, specifications and availability are subject to change serving the technical improvement.

LCD reversing video systems 15 WAECO PerfectView RVS 550 / RVS 550W 3.19 Reversing video systems with 5" LCD monitor and colour camera (silver or white) 5" LCD colour monitor M 5L M 5L With infrared LED! For 12-volt and 24-volt operating voltage Switches on automatically or by manual operation Automatic day / night adjustment 235,000 pixels 2 camera inputs with separate controls Image settings can be saved for either camera Loudspeaker USB port for recharging of MP3 players, etc. LED background illumination Technical data M 5L Dimensions (W x H x D) 144 x 128 x 120 mm (incl. mount) Diagonal screen dimension 5" / 128 mm (visible picture) Operating voltage 12 to 30 volts DC Power input 10 watts 235,000 pixels PAL / NTSC auto Operating temperature 20 C to +60 C Vibration resistance 5 g 300 g Picture brightness 400 cd/m² Dimmer automatic via LDR inputs 2 with signal recognition CAM 50CW, white PerfectView RVS 550 (M 5L and colour camera CAM 50C) 5" PerfectView RVS 550W (M 5L and colour camera CAM 50CW) 5" AUDIO AUDIO IP 69K IP 69K CAM 50C, silver camera CAM 50C / CAM 50CW camera (PAL) with LED Anodised and powder coated housing Adjustable anti-dazzle sunshield Microphone Temperature controlled heater Electronic brightness adjustment LDR controlled IR-LEDs Wide-angle lens with large picture angle (120 diagonal) Technical data CAM 50C / CAM 50CW Dimensions (W x H x D) 94 x 62 x 48 mm (incl. mount) Operating voltage 11 to 16 volts DC Power input 1.8 watts (with heater) Picture sensor 1/4" SONY CCD 270,000 pixels Picture angle 120 diagonal h: approx. 90 v: approx. 70 Light sensitivity < 1 lux or 0 lux with LED PAL Operating temperature 20 C to +65 C CAM 50C: silver CAM 50CW: white Vibration resistance 6 g 200 g Brightness adjustment electronic Type of protection IP 69K 128 62 Scope of delivery: 5" LCD colour monitor incl. Easylink monitor mount, colour camera, 20 m monitor-to-camera connection cable, set of cables for monitor, installation fittings for all components, anti-dazzle sunshield 144 120 94 48 PerfectView RVS 550 9101900009 PerfectView RVS 550W 9101900025 Matching accessories for reversing video systems e.g. for connection of an additional camera can be found on pages 26 34. vehicle-construction.dometic-waeco.com

16 LCD reversing video systems shutter camera with infrared LED Great technology, compact size High-grade 5" colour system with shutter camera The WAECO PerfectView RVS 580 reversing video system was conceived for professional demands. The robust colour shutter camera PerfectView CAM 80CM withstands all weathers, the motor-operated shutter protects the 145 wide-angle lens from dirt and damage. More quality features: high-performance 1/3" SONY CCD image sensor, infrared LED for enhanced vision in dark conditions, temperature controlled heater, microphone. Featuring LED background illumination, the PerfectView M 5L 5" LCD colour monitor provides brilliant picture quality. Other plus factors include ergonomic controls, the practical Easylink monitor mount (see page 4), trailer camera recognition and a second video output with separate controls. PerfectView Accessory cable kits Ordering is easy: WAECO offers pre-configured cable kits for the two most common towing systems, truck/trailer or tractor/trailer. Details on pages 31/32. RVS 580 is suitable for: Contents, specifications and availability are subject to change serving the technical improvement.

LCD reversing video systems 17 WAECO PerfectView RVS 580 3.19 Reversing video system with 5" LCD monitor and colour shutter camera 5" LCD colour monitor M 5L With infrared LED! For 12-volt and 24-volt operating voltage Switches on automatically or by manual operation Automatic day / night adjustment 235,000 pixels 2 camera inputs with separate controls Image settings can be saved for either camera Loudspeaker USB port for recharging of MP3 players, etc. LED background illumination Technical data M 5L Dimensions (W x H x D) 144 x 128 x 120 mm (incl. mount) Diagonal screen dimension 5" / 128 mm (visible picture) Operating voltage 12 to 30 volts DC Power input 10 watts 235,000 pixels PAL / NTSC auto Operating temperature 20 C to +60 C Vibration resistance 5 g 300 g Picture brightness 400 cd/m² Dimmer automatic via LDR inputs 2 with signal recognition shutter camera CAM 80CM 5" AUDIO IP 68 SHUTTER CCD camera (PAL) with LED Automatic, motor-operated shutter to prevent soiling of the camera lens Anodised and powder-coated aluminium housing with protective cap and mount in stainless steel Microphone Temperature controlled heater Electronic brightness adjustment LDR controlled IR-LEDs Wide-angle lens with large picture angle (145 diagonal) Technical data CAM 80CM Dimensions (W x H x D) 106 x 68 x 54 mm (incl. mount) Operating voltage 11 to 16 volts DC Power input 1.8 watts (with heater) Picture sensor 1/3" SONY CCD 270,000 pixels Picture angle 145 diagonal h: approx. 100 v: approx. 72 Light sensitivity < 1 lux or 0 lux with LED PAL Operating temperature 20 C to +65 C Vibration resistance 6 g 350 g Brightness adjustment electronic Type of protection IP 68 144 120 128 106 54 68 Scope of delivery: 5" LCD colour monitor incl. Easylink monitor mount, colour shutter camera, 20 m monitor-to-camera connection cable, set of cables for monitor, installation fittings for all components PerfectView RVS 580 9101900020 Automatic, motor-operated shutter to prevent soiling of the camera lens Matching accessories for reversing video systems e.g. for connection of an additional camera can be found on pages 26 34. vehicle-construction.dometic-waeco.com

18 LCD reversing video systems One size up: the LCD medium class 7" colour monitor + three camera versions The three PerfectView system versions combine the qualities of the LCD comfort class with the extra comfort of a large-format 7" LCD monitor with LED background illumination. The PerfectView M 7L excels with its brilliant picture quality and handy details: ergonomic control elements placed on the upper face of the unit, trailer camera recognition, Easylink monitor mount (see page 4). The two video inputs offer the possibility to store image settings separately for each camera. The compact PerfectView CAM 50C colour camera yields a comfortable picture angle of 120 and is fitted with infrared LEDs, temperature controlled heating and a microphone. As an alternative to the silver cabinet we offer a same-build model in white (CAM 50CW). For heavy-duty needs we have combined the M 7L monitor with a colour shutter camera (CAM 80CM), which widens the field of view to a comfortable 145. PerfectView Accessory cable kits Ordering is easy: WAECO offers pre-configured cable kits for the two most common towing systems, truck/trailer or tractor/trailer. Details on pages 31/32. RVS 750 / RVS 750W / RVS 780 are suitable for: Contents, specifications and availability are subject to change serving the technical improvement.

LCD reversing video systems 19 WAECO PerfectView RVS 750 / RVS 750W / RVS 780 3.19 Reversing video systems with 7" LCD monitor and colour camera or colour shutter camera 7" LCD colour monitor M 7L M 7L With infrared LED! For 12-volt and 24-volt operating voltage Switches on automatically or by manual operation Automatic day / night adjustment 337,000 pixels 2 camera inputs with separate controls Image settings can be saved for either camera Loudspeaker USB port for recharging of MP3 players, etc. LED background illumination Technical data M 7L Dimensions (W x H x D) 186 x 145 x 120 mm (incl. mount) Diagonal screen dimension 7" / 178 mm (visible picture) Operating voltage 12 to 30 volts DC Power consumption 12 watts 337,000 pixels PAL / NTSC auto Operating temperature 20 C to +60 C Vibration resistance 5 g 450 g Picture brightness 400 cd/m² Dimmer automatic via LDR inputs 2 with signal recognition CAM 50CW, white CAM 50C, silver camera CAM 50C / CAM 50CW For description and technical data see p. 15 CAM 80CM shutter camera CAM 80CM For description and technical data see p. 17 PerfectView RVS 750 (M 7L and colour camera CAM 50C) 7" AUDIO IP 69K PerfectView RVS 750W (M 7L and colour camera CAM 50CW) 7" AUDIO IP 69K PerfectView RVS 780 (M 7L and colour shutter camera CAM 80CM) 7" AUDIO IP 68 SHUTTER Scope of delivery RVS 750 / RVS 750W: 7" LCD colour monitor incl. Easylink monitor mount, colour camera, 20 m monitor-to-camera connection cable, set of cables for monitor, installation fittings for all components, anti-dazzle sunshield Scope of delivery RVS 780: 7" LCD colour monitor incl. Easylink monitor mount, colour shutter camera, 20 m monitor-to-camera connection cable, set of cables for monitor, installation fittings for all components PerfectView RVS 750 9101900022 PerfectView RVS 750W 9101900011 PerfectView RVS 780 9101900024 145 186 120 62 68 94 48 106 54 CAM 50CW: colour camera with white cabinet CAM 80CM: LEDs placed separately Matching accessories for reversing video systems e.g. for connection of an additional camera can be found on pages 26 34. vehicle-construction.dometic-waeco.com

20 LCD reversing video systems 7" monitor in a class of its own Truly great: the LCD premium class 7" high-end monitor + colour camera or colour shutter camera The undisputed highlight of the two PerfectView LCD reversing video systems is the highresolution 7" colour monitor, PerfectView M 7LX. In addition to all the quality features of the M 7L basic model, this high-end monitor offers two significant extras: three camera inputs (with the possibility to program and store settings separately for each camera) as well as adjustable OSD distance marks for convenient manœuvring (see diagram at the bottom of page 21). Two PerfectView cameras are available for combination. The compact CAM 50C colour camera yields a picture angle of 120 and features infrared LEDs, temperature controlled heating and a microphone. For heavy-duty use we recommend the CAM 80CM colour shutter camera with 145 wide-angle lens. PerfectView Accessory cable kits Ordering is easy: WAECO offers pre-configured cable kits for the two most common towing systems, truck/trailer or tractor/trailer. Details on pages 31/32. RVS 750X / RVS 780X are suitable for: Contents, specifications and availability are subject to change serving the technical improvement.

LCD reversing video systems 21 WAECO PerfectView RVS 750X / RVS 780X 3.19 High-end reversing video systems with high-quality 7" LCD monitor and colour camera or colour shutter camera 7" LCD colour monitor M 7LX M 7LX With infrared LED! For 12-volt and 24-volt operating voltage Switches on automatically or by manual operation Automatic day / night adjustment Adjustable distance marks 337,000 pixels 3 camera inputs with separate controls Image settings can be saved for either camera Loudspeaker USB port for recharging of MP3 players, etc. LED background illumination Technical data M 7LX Dimensions (W x H x D) 186 x 145 x 120 mm (incl. mount) Diagonal screen dimension 7" / 178 mm (visible picture) Operating voltage 12 to 30 volts DC Power consumption 12 watts 337,000 pixels PAL / NTSC auto Operating temperature 20 C to +60 C Vibration resistance 5 g 450 g Picture brightness 400 cd/m² Dimmer automatic via LDR inputs 3 with signal recognition CAM 80CM CAM 50C camera CAM 50C For description and technical data see p. 15 shutter camera CAM 80CM For description and technical data see p. 17 PerfectView RVS 750X (M 7LX and colour camera CAM 50C) 7" AUDIO IP 69K PerfectView RVS 780X (M 7LX and colour shutter camera CAM 80CM) 7" AUDIO IP 68 SHUTTER Scope of delivery RVS 750X: 7" LCD colour monitor incl. Easylink monitor mount, colour camera, 20 m monitor-to-camera connection cable, set of cables for monitor, installation fittings for all components, anti-dazzle sunshield Scope of delivery RVS 780X: 7" LCD colour monitor incl. Easylink monitor mount, colour shutter camera, 20 m monitor-to-camera connection cable, set of cables for monitor, installation fittings for all components PerfectView RVS 750X 9101900010 PerfectView RVS 780X 9101900008 186 62 120 145 68 C D B A C D Distance marks on the monitor A: Stop line at 0.5 m distance B: Warning line at 3 m distance C: Reference line for vehicle width D: Vehicle rear The adjustable distance marks clearly show which obstacles are in the danger zone. This makes reverse parking safe and simple, even with a 40-tonne truck. 94 48 106 54 Matching accessories for reversing video systems e.g. for connection of an additional camera can be found on pages 26 34. vehicle-construction.dometic-waeco.com

22 LCD reversing video systems Perfect close and long-range vision Reversing video systems with twin camera The WAECO PerfectView RVS 590 and RVS 790 revers ing video systems offer a double safety bonus. In reverse gear the monitor (5" or 7") provides an exact picture of the area closest behind the vehicle. When driving forwards, the system changes into distance mode: the monitor shows what is going on far behind the vehicle, just like an over-dimensioned rear-view mirror would. The technical conditions for the dual function are provided by the colour twin camera CAM 33C1. It features two separate camera modules a 140 wideangle lens for the area close behind the vehicle and a 40 lens for long-distance vision. The picture quality is much better than with competitors products using a wide-angle lens also in long-distance mode. A motor-operated shutter protects the camera from soiling. PerfectView CAM 33C1: Two camera modules in one cabinet Long-range camera module (40 lens): ideal when driving in a convoy or with a trailer, or complementary to the outside mirror when overtaking Close-range camera module (140 wide-angle lens): for extra safety while manœuvring When driving forwards, the (PerfectView M 5L or M 7L) gives a long-distance rear view; when reverse gear is engaged the system changes automatically into close-range mode. Advantage over swivel-mount cameras: both camera modules are firmly fitted in place, so there s no need for failure-prone electric motors or sensitive swivel mechanics, and no need for costly consoles to accommodate the controls. PerfectView Accessory cable kits Ordering is easy: WAECO offers pre-configured cable kits for the two most common towing systems, truck/trailer or tractor/trailer. Details on pages 31/32. RVS 590 / RVS 790 are suitable for: Contents, specifications and availability are subject to change serving the technical improvement.

LCD reversing video systems 23 WAECO PerfectView RVS 590 / RVS 790 3.19 Reversing video systems with 5" or 7" LCD monitor and colour twin camera with shutter 5" LCD colour monitor M 5L For description and technical data see p. 17 7" LCD colour monitor M 7L For description and technical data see p. 19 M 5L With infrared LED! M 7L CAM 33C1 twin camera with shutter CAM 33C1 CCD shutter camera (PAL) with Technical data CAM 33C1 two lenses Dimensions (W x H x D) 125 x 73 x 115 mm (incl. mount) Large picture angle in close range Operating voltage 12 volts DC (140 diagonal) Power consumption approx. 1.2 watts Sharp, undistorted pictures in long Picture sensor 1/3" CCD sensor range (40 diagonal) 290,000 pixels Operated via the two camera inputs in the monitor Manual or automatic switchover between the cameras Picture angle Close-range: 140 diagonal h: approx. 100 v: approx. 72 Long-distance: 40 diagonal h: approx. 32 v: approx. 28 Anodised and powder coated Light sensitivity < 1 lux or 0 lux with LED aluminium housing with protective PAL cover and mount in stainless steel Operating temperature 20 C to +65 C Automatic, motor-operated camera Vibration resistance 6 g shutter to prevent soiling of the camera 450 g lens Brightness adjustment electronic Integrated heater factory-preset mirrored picture Microphone Type of protection Equivalent to IP 68 Electronic brightness adjustment Factory-preset mirrored picture function LDR controlled IR LEDs PerfectView RVS 590 (M 5L and colour twin camera CAM 33C1) 5" AUDIO SHUTTER PerfectView RVS 790 (M 7L and colour twin camera CAM 33C1) 7" AUDIO SHUTTER Scope of delivery RVS 590: 5" LCD colour monitor incl. Easylink monitor mount, colour twin camera with shutter, 20 m monitor-to-camera connection cable, set of cables for monitor, installation fittings for all components Scope of delivery RVS 790: 7" LCD colour monitor incl. Easylink monitor mount, colour twin camera with shutter, 20 m monitor-to-camera connection cable, set of cables for monitor, installation fittings for all components PerfectView RVS 590 9101900021 PerfectView RVS 790 9101900016 145 120 186 120 73 128 144 125 115 One camera two lenses: one for close range, one for long range Even when the shutter is closed, the opening allows long-distance rear vision Matching accessories for reversing video systems e.g. for connection of an additional camera can be found on pages 26 34. vehicle-construction.dometic-waeco.com

24 LCD reversing video systems EUcertified system Approved safety PerfectView FVS 740X front camera/reversing video system Time and again fatal accidents happen at crossroads, T-junctions and roundabouts, because truck drivers overlook pedestrians or cyclists close to their vehicle. To prevent such blind-spot accidents the European Union has passed the 2003/97/EC directive, which stipulates a larger minimal field of vision. The PerfectView FVS 740X front camera/reversing video system meets the enhanced EU requirements. It includes the highquality LCD colour monitor PerfectView M 7LX, which in combination with the colour ball camera CAM 40 is certified according to 2003/97/EC. When used as a front camera system, PerfectView FVS 740X gives you a perfect overview of what s happen ing in front and beside your vehicle. Alter natively, you can fit the ball camera to the rear using a longer connection cable (optional accessory). It is a simple and low-cost way for you to get a EU-certified reversing video system and one with great optical features! Tests according to EN 12368 and ISO 15008:2003 have shown that the camera and monitor give reliable image quality even in oncoming light from other vehicles or the sun. FVS 740X is suitable for: Contents, specifications and availability are subject to change serving the technical improvement.

LCD reversing video systems 25 WAECO PerfectView FVS 740X 3.19 Front camera/reversing video system with high-quality 7" LCD monitor and colour ball camera EU-certified system for high demands on safety and ergonomics optimal vision even in dark surroundings or in oncoming light 7" LCD colour monitor M 7LX Front camera system according to 2003/97/EC mirror directive For 12-volt and 24-volt operating voltage Switches on automatically or by manual operation Automatic day / night adjustment 3 camera inputs with separate controls Image settings can be saved for either camera Loudspeaker USB port for recharging of MP3 players, etc. LED background illumination for maximum picture quality (tested according to ISO 15008:2003) Technical data M 7LX Dimensions (W x H x D) 186 x 145 x 120 mm (incl. mount) Diagonal screen dimension 7" / 178 mm (visible picture) Operating voltage 12 to 30 volts DC Power consumption 12 watts 337,000 pixels PAL / NTSC auto Operating temperature 20 C to +60 C Vibration resistance 5 g 450 g Picture brightness 400 cd/m² Dimmer automatic via LDR inputs 3 with signal recognition ball camera CAM 40 7" IP 68 EU certified ball camera with very flexible mount for accurate alignment CCD camera (PAL) Light-sensitive, high-resolution infrared LED camera (tested according to EN 12368) Sturdy, water-proof aluminium housing Electronic brightness adjustment LDR controlled IR-LEDs Wide-angle lens with large picture angle (130 diagonal) Technical data CAM 40 Dimensions (W x H x D) 72 x 60 x 63 mm (incl. mount) Operating voltage 11 to 16 volts DC Power input approx. 1.8 watts Picture sensor 1/3" CCD sensor 290,000 pixels Picture angle 130 diagonal h: approx. 90 v: approx. 70 Light sensitivity < 0.1 lux or 0 lux with LED PAL Operating temperature 20 C to +65 C Vibration resistance 10 g 200 g Brightness adjustment electronic Type of protection IP 68 Scope of delivery: 7" LCD colour monitor incl. Easylink monitor mount, colour ball camera, 5 m monitor-to-camera connection cable, set of cables for monitor, installation fittings for all components 145 60 PerfectView FVS 740X 9101900023 186 120 72 63 Optional extra: PerfectView GPS 30 Signal transmitter for speeddependent enabling / disabling 9102200010 The camera delivers a true-sided image. The picture on the monitor is crystal-clear, bright and high in contrast. Safety bonus at night-time: the ball camera provides high-contrast pictures even in unlighted parking areas. The compact ball camera does not protrude beyond the bodywork: optimal protection from damage in the wash bay, by tree branches or when manœuvring. Matching accessories for reversing video systems e.g. for connection of an additional camera can be found on pages 26 34. vehicle-construction.dometic-waeco.com

26 s for navigation / reversing video systems Do you want to add one or more cameras to an LCD reversing video system? Front, side or trailer camera Dometic WAECO has the right camera for every demand and budget. Installation fittings are included in the delivery kit. Does the vehicle have a navigation system with monitor on board? If so, you can recommend your customer to upgrade it into a reversing video system. All you have to do is connect a suitable PerfectView rear-view camera to the monitor of the navigation system. Matching adapter cables are available as optional accessories. All camera kits are supplied complete with adapter cables. Reversing video system System camera with system cable Optional extra Additional camera with system cable System and extension cable Heavy-duty spiral cable set Navigation system Optional extra Additional camera with system cable (and adapter cable if required) Switchbox SWITCH Preconditions for connecting a rear-view camera Navigation systems PREPARED for video applications...... generally have a cinch / RCA socket as video input (A/V or AUX). WAECO PerfectView cameras fitted with a connection box or adapter can be directly connected to these systems. Navigation systems NOT PREPARED for video applications...... can only be upgraded with a rear-view camera if the manufacturer of the navigation system offers a matching video converter. Things to consider before buying a camera: WAECO PerfectView cameras with real-view or mirrored picture function (p. 27 30) are compatible with almost all commonly available navigation systems. Does the monitor recognise NTSC and PAL video formats? WAECO PerfectView cameras are suitable e.g. for navigation systems from Kenwood, Panasonic and Pioneer. Note: Any questions? We are here to help. Detailed information on all products can be found at www.dometic-waeco.com. Also feel free to contact the Dometic WAECO representation in your country. Contents, specifications and availability are subject to change serving the technical improvement.

s for navigation / reversing video systems 27 WAECO PerfectView CAM 80 / CAM 80CM / CAM 80NAV 3.19 CAM 80 / CAM 80CM Universal use with AV video output CAM 80NAV b/w shutter camera CAM 80 shutter camera CAM 80CM shutter camera for navigation systems CAM 80NAV Real-view picture function (CAM 80) (CAM 80CM / CAM 80NAV) Automatic, motor-operated shutter to prevent soiling of the camera lens Anodised and powder-coated aluminium housing with protective cap and mount in stainless steel Microphone (except for CAM 80) Temperature controlled heater Electronic brightness adjustment LDR controlled IR-LEDs Wide-angle lens with large picture angle (145 diagonal) CAM 80NAV is fitted with the connection box PerfectView AMP 100 for connection to navigation systems Technical data CAM 80 / CAM 80CM / CAM 80NAV Dimensions (W x H x D) 106 x 68 x 54 mm (incl. mount) Operating voltage 11 to 16 volts DC Power input 1.8 watts (with heater) Picture sensor 1/3" SONY CCD 270,000 pixels Picture angle 145 diagonal h: approx. 100 v: approx. 72 Light sensitivity CAM 80: < 0.5 lux or 0 lux with LED CAM 80CM / CAM 80NAV: < 1 lux or 0 lux with LED CAM 80: EIA CAM 80CM / CAM 80NAV: PAL Operating temperature 20 C to +65 C Vibration resistance 6 g 350 g Brightness adjustment electronic CAM 80: real-view picture CAM 80CM / CAM 80NAV: Type of protection IP 68 PerfectView AMP 100 The connection box allows you to connect the camera to almost any monitor with PAL video format. AV video output (RCA), e.g. for computers, navigation, TV Technical data AMP 100 Dimensions (W x H x D) 57 x 130 x 30 mm Operating voltage 12 to 24 volts DC 1 camera / monitor input, 1 AV output PerfectView CAM 80 b/w IP 68 SHUTTER PerfectView CAM 80CM / CAM 80NAV AUDIO IP 68 SHUTTER Scope of delivery: shutter camera, 20 m monitor-to-camera connection cable, installation fittings for all components, connection box PerfectView AMP 100 (CAM 80NAV only) 68 106 54 PerfectView CAM 80 9102000021 PerfectView CAM 80CM 9102000042 PerfectView CAM 80NAV 9102000023 WAECO PerfectView SWITCH 3.19 Switchbox for connection of more than one camera to navigation systems 30 130 57 Features & functions s can be activated either automatically or manually (e.g. reversing cameras via reverse gear, side-mounted cameras via indicators) Power consumption: 0.84 watts max. (without cameras) Suitable for 12- and 24-volt vehicle electrics PerfectView SWITCH 9102200034 vehicle-construction.dometic-waeco.com

28 s for navigation / reversing video systems WAECO PerfectView CAM 50 / CAM 50C / CAM 50CW / CAM 50NAV 3.19 CAM 50CW / CAM 50NAV, white PerfectView CAM 50 b/w AUDIO IP 69K PerfectView CAM 50C / CAM 50CW / CAM 50NAV CAM 50 / CAM 50C / CAM 50NAV, silver b/w camera CAM 50 camera CAM 50C / CAM 50CW camera for navigation systems CAM 50NAV Anodised and powder coated housing Adjustable anti-dazzle sunshield Microphone Temperature controlled heater Electronic brightness adjustment LDR controlled IR-LEDs Wide-angle lens with large picture angle (120 diagonal) CAM 50NAV is fitted with an RCA plug for connection to navigation systems Technical data CAM 50 / CAM 50C / CAM 50CW / CAM 50NAV Dimensions (W x H x D) 94 x 62 x 48 mm (incl. mount) Operating voltage 11 to 16 volts DC Power input 1.8 watts (with heater) Picture sensor 1/4" SONY CCD 270,000 pixels Picture angle 120 diagonal h: approx. 90 v: approx. 70 Light sensitivity < 1 lux or 0 lux with LED CAM 50: EIA CAM 50C / CAM 50CW / CAM 50NAV: PAL Operating temperature 20 C to +65 C CAM 50 / CAM 50C / CAM 50NAV: silver CAM 50CW / CAM 50NAV: white Vibration resistance 6 g 200 g Brightness adjustment electronic Type of protection IP 69K AUDIO IP 69K 94 48 62 Scope of delivery: camera, 20 m monitor-to-camera connection cable, installation fittings for all components, anti-dazzle sunshield, adapter cable for navigation systems (CAM 50NAV only) PerfectView CAM 50, silver 9102000028 PerfectView CAM 50C, silver 9102000019 PerfectView CAM 50CW, white 9102000027 PerfectView CAM 50NAV, silver 9102000022 PerfectView CAM 50NAV, white 9102000043 WAECO PerfectView CAM 16 3.19 cylinder camera for discreet mounting in Technical data CAM 16 bumpers, bus mirrors, etc. Dimensions (Ø x L) 30 x 46 mm (incl. mount) cylinder camera (PAL) Operating voltage 11 to 16 volts DC Power input approx. 1.0 watts Excellent light sensitivity Picture sensor 1/4" CCD sensor Can be fitted with or without mounting 270,000 pixels bracket Mounting bracket included in the Picture angle 150 diagonal h: approx. 102 v: approx. 73 delivery kit Light sensitivity < 1 lux Compact size PAL Wide-angle lens with large picture angle Operating temperature 20 C to +65 C (150 diagonal) Vibration resistance 6 g The ideal side camera 200 g Brightness adjustment electronic Ready for connection to navigation systems with ADAPT5 Type of protection equivalent to IP 68 adapter cable Info: For connection to monitor models M 5L, M 7L and M 7LX, the ADAPT3 adapter is required. Scope of delivery: colour cylinder camera, mounting bracket, 20 m monitor-to-camera connection cable, installation fittings for all components 30 46 30 PerfectView CAM 16 RV-16 Optional extra: ADAPT5 adapter cable for navigation systems 9102200047 ADAPT3 monitor adapter, new plug / old socket (6-pin mini DIN, grey cable) 9102200046 Contents, specifications and availability are subject to change serving the technical improvement.

s for navigation / reversing video systems 29 WAECO PerfectView CAM 16BK NAV 3.19 cylinder camera for navigation systems incl. brake light console cylinder camera (PAL) To be fitted on the original brake light of Fiat Ducato X250, Citroën Jumper, Peugeot Boxer Excellent light sensitivity Electronic brightness adjustment Wide-angle lens with large picture angle (150 diagonal) Technical data Dimensions (W x H x D) Operating voltage Power input Picture sensor Picture angle Light sensitivity CAM 16BK NAV 330 x 100 x 70 mm (incl. housing) 11 to 16 volts DC approx. 1.0 watts 1/4" CCD sensor 270,000 pixels 150 diagonal h: approx. 102 v: approx. 73 < 1 lux PAL Operating temperature 20 C to +65 C Vibration resistance Brightness adjustment silver/white 6 g 200 g electronic Type of protection equivalent to IP 68 330 70 100 Scope of delivery: colour cylinder camera incl. brake light console, 20 m monitorto-camera connection cable, installation fittings for all components, adapter cable for navigation systems PerfectView CAM 16BK NAV 9102000051 WAECO PerfectView CAM 30CK NAV 3.19 ball camera for navigation systems incl. roof-mount housing CCD camera (PAL) with LED For roof mounting on panel vans that do not have a suitable surface to mount a camera on the rear Fits VW Crafter, Mercedes Sprinter (other vehicle models with universal adapter) Sturdy, water-proof aluminium housing Microphone Electronic brightness adjustment LDR controlled IR-LEDs Wide-angle lens with large picture angle (120 diagonal) Technical data Dimensions (W x H x D) Operating voltage Power input Picture sensor Picture angle Light sensitivity CAM 30CK NAV 130 x 84 x 250 mm (incl. housing) 11 to 16 volts DC approx. 1.8 watts 1/4" CCD sensor 270,000 pixels 120 diagonal h: approx. 90 v: approx. 70 < 1 lux or 0 lux with LED PAL Operating temperature 20 C to +65 C Vibration resistance Brightness adjustment silver/anthracite 8 g 200 g electronic Type of protection IP 68 AUDIO IP 68 250 130 84 Scope of delivery: colour ball camera roof-mount housing and angular adapter for universal installation, 20 m monitor-to-camera connection cable, installation fittings for all components, adapter cable for navigation systems PerfectView CAM 30CK NAV 9102000050 vehicle-construction.dometic-waeco.com

30 s for navigation / reversing video systems WAECO PerfectView CAM 30C 3.19 ball camera ball camera with very flexible mount for accurate alignment CCD camera (PAL) with LED Sturdy, water-proof aluminium housing Microphone Electronic brightness adjustment LDR controlled IR-LEDs Wide-angle lens with large picture angle (120 diagonal) The ideal side camera Ready for connection to navigation systems with ADAPT5 adapter cable Technical data CAM 30C Dimensions (W x H x D) 72 x 60 x 63 mm (incl. mount) Operating voltage 11 to 16 volts DC Power input approx. 1.8 watts Picture sensor 1/4" CCD sensor 270,000 pixels Picture angle 120 diagonal h: approx. 90 v: approx. 70 Light sensitivity < 1 lux or 0 lux with LED PAL Operating temperature 20 C to +65 C Vibration resistance 8 g 200 g Brightness adjustment electronic Type of protection IP 68 AUDIO IP 68 60 Scope of delivery: colour ball camera, 20 m monitor-to-camera connection cable with threaded connectors, installation fittings for all components 72 63 PerfectView CAM 30C 9102000045 Optional extra: ADAPT5 adapter cable for navigation systems 9102200047 WAECO PerfectView CAM 40 3.19 ball camera ball camera with very flexible mount for accurate alignment CCD camera (PAL) with LED Sturdy, water-proof aluminium housing Electronic brightness adjustment LDR controlled IR-LEDs Wide-angle lens with large picture angle (130 diagonal) In combination with the M 7LX monitor certified for use as a front camera system according to 2003/97/EG mirror directive Technical data CAM 40 Dimensions (W x H x D) 72 x 60 x 63 mm (incl. mount) Operating voltage 11 to 16 volts DC Power input approx. 1.8 watts Picture sensor 1/3" CCD sensor 290,000 pixels Picture angle 130 diagonal h: approx. 90 v: approx. 70 Light sensitivity < 0.1 lux or 0 lux with LED PAL Operating temperature 20 C to +65 C Vibration resistance 10 g 200 g Brightness adjustment electronic Type of protection IP 68 IP 68 60 Scope of delivery: colour ball camera, 5 m monitor-to-camera connection cable with threaded connectors, installation fittings for all components 72 63 PerfectView CAM 40 9102000047 Contents, specifications and availability are subject to change serving the technical improvement.

Accessories for reversing video systems 31 Cable kit for trailers Complete installation kit for towing vehicles with trailer Do you want to combine a CRT or LCD reversing video system (p. 6/7) with a reversing camera on the trailer? No problem. Simply pick the camera you want from our range (p. 27 30). Everything you need for installation can be found in this extension kit: cables and connectors all perfectly compatible and configured. How to use the trailer cable kit WAECO PerfectView reversing video system (see p. 6/7, except for CRT 245, RVS 590, RVS 790) System camera with system cable Trailer cable kit System and extension cable Heavy-duty spiral cable set Additional camera with system cable (see p. 27 30) WAECO PerfectView Accessory trailer cable set 3.19 Complementary cable system for easy installation of a reversing video system with additional camera on vehicles with trailer Components System and extension cable 9102200030 with 6-pole threaded connectors, 20 m cable length Heavy-duty spiral cable set SPK 150 9102200031 spiral cable (4 m working length), heavy-duty design, incl. ready-to-use sockets (plug / jack), for towing vehicles with trailer / semi-trailer, especially suitable for commercial applications Scope of delivery: 20 m system and extension cable, 4 m heavy-duty spiral cable set, installation fittings for all components Trailer cable set 9102200040 System for vehicles with trailer = Reversing video system (p. 6/7) + additional camera (p. 27 30) + trailer cable set vehicle-construction.dometic-waeco.com

32 Accessories for reversing video systems Complete installation kit for tractor-trailer combinations Cable kit for tractortrailers Easy to order, faultless installation: fitting a tractor-trailer with a CRT or LCD reversing video system (p. 6/7) is quick and easy with this installation kit. All cables and connectors required for installation are included. Plug-in components make for simple and flexible installation. How to use the tractor cable kit WAECO PerfectView reversing video system (see p. 6/7) System camera with system cable Tractor cable set System and extension cable Heavy-duty spiral cable set WAECO PerfectView Accessory tractor cable set 3.19 Complementary cable system for easy installation of a reversing video system on tractor-trailer vehicles Components System and extension cable 9102200029 with 6-pole threaded connectors, 10 m cable length Heavy-duty spiral cable set SPK 150 9102200031 spiral cable (4 m working length), heavy-duty design, incl. ready-to-use sockets (plug / jack), for towing vehicles with trailer / semi-trailer, especially suitable for commercial applications Scope of delivery: 10 m system and extension cable, 4 m heavy-duty spiral cable set, installation fittings for all components Tractor cable set 9102200039 System for tractor-trailers = Reversing video system (p. 6/7) + tractor cable set Contents, specifications and availability are subject to change serving the technical improvement.

Accessories for reversing video systems 33 WAECO PerfectView VS 200 3.19 35 130 118 Video splitter for WAECO cameras with PAL video standard* Displays the video images from two connected cameras on a single monitor activation via control signals, such as indicators or reverse gear Split mode or display of single camera image manually Technical data Dimensions (W x H x D) Operating voltage inputs Control inputs Display VS 200 130 x 115 x 35 mm 10 to 32 volts DC 2 External / switch Cam1 / Cam2 / Split 600 g * not for CRT systems Scope of delivery: video splitter with supply cable (1.0 m), operating instructions PerfectView VS 200 9102200036 WAECO PerfectView Accessories 3.19 System and extension cable Features & functions 6-pole threaded connector, water-proof System and extension cable 5 m 9102200028 System and extension cable 10 m 9102200029 System and extension cable 20 m 9102200030 Heavy-duty spiral cable set SPK 150 for trailers incl. sockets Heavy-duty spiral cable set SPK 160 for trailers incl. sockets Features & functions Trailer cable, 4 metres, heavy-duty design, ready-to-use with sockets (plug / jack) For towing vehicles with trailer / semi-trailer Especially suitable for commercial applications Compatible with spiral cable RV-500SPK (up to 2009) Heavy-duty spiral cable set SPK 150 9102200031 for trailers incl. sockets Prepared system connections (available as single parts): Socket with male system plug 9102200065 Socket with female system jack 9102200064 Features & functions Trailer cable, 4 metres, heavy-duty design, ready-to-use with sockets (plug / jack) For towing vehicles with trailer / semi-trailer Especially suitable for commercial applications Compatible with spiral cable RV-100SPK (up to 2009) Heavy-duty spiral cable set SPK 160 for trailers incl. sockets 9102200077 System and extension cable CAB 39 for trailers with low coupling Features & functions Trailer cable, 5 metres, for trailers with low coupling With ABS socket (12-volt model) System and extension cable CAB 39 for trailers with low coupling, 5 m 9102200110 vehicle-construction.dometic-waeco.com

34 Accessories for reversing video systems PerfectView SWITCH connects what you want connected Using the switchbox you can connect up to three cameras to one monitor and control them individually! PerfectView SWITCH is compatible with almost any WAECO camera. The cameras can be activated either automatically or manually (e.g. the reversing camera via reverse gear, the side-mounted cameras via the indicator). with 2 cameras The M 7L LCD monitor has two camera sockets. You can connect, for example, a reversing camera and a front camera. SWITCH Turning 2 into 4 with PerfectView SWITCH The same monitor, thanks to the switchbox, now with up to four cameras: for example, a reversing camera, two side cameras (one each left and right), and an additional camera to monitor the working area WAECO PerfectView SWITCH 3.19 Switchbox for additional reversing video applications For running up to three independently controlled cameras from one monitor camera input 30 Features & functions s can be activated either automatically or manually (e.g. reversing cameras via reverse gear, side-mounted cameras via indicators) Power consumption: 0.84 watts max. (without cameras) Suitable for 12- and 24-volt vehicle electrics 130 57 Scope of delivery: switchbox, cable for connection to vehicle electrics, switch for manual activation of the cameras,switch box connection cable, fitting materials, installation and operating instruction PerfectView SWITCH 9102200034 WAECO PerfectView Accessories 3.19 Cable adapters ADAPT2 camera adapter Features & functions The two cable systems used by WAECO up to 2009 (black or grey) are replaced as of 2010 by a new, uniform cable system. Adapters for adapting installed cables when existing components are replaced by new ones; eliminate the need to re-lay cables Easy allocation to cable systems with colour-coded plug connectors Clear identification of suitable connections on the adapters More adapters available on request ADAPT3 monitor adapter ADAPT1 camera adapter ADAPT6 monitor adapter Cable adapters on WAECO LCD cables up to 2009 ADAPT2 camera adapter, new socket / old plug (6-pin mini DIN, grey cable) 9102200043 ADAPT3 monitor adapter, new plug / old socket (6-pin mini DIN, grey cable) 9102200046 Cable adapters on WAECO CRT cables up to 2009 ADAPT1 camera adapter, new socket / old plug (6-pin mini DIN, black cable) 9102200042 ADAPT6 monitor adapter, new plug / old socket (6-pin mini DIN, black cable) 9102200057 Note: Adapters are only required for connecting new monitors and cameras to older WAECO cable systems. Also feel free to contact the Dometic WAECO representation in your country. Contents, specifications and availability are subject to change serving the technical improvement.

Interior surveillance cameras 35 Watchful and inconspicuous s for vehicle interiors High resolutions of 310,000 or 330,000 pixels along with a light sensitivity of 0.01 lux qualify the PerfectView cameras CAM 11 and CAM 12 for interior use. The special dome design allows optimal alignment of the lens even if the camera is mounted concealed. The 120 wide-angle lens reliably monitors safety-relevant areas in public transport vehicles, buildings and machine halls. The CAM 11, featuring an installed height of just 31 mm, is especially inconspicuous. The CAM 12 excels with infrared LEDs which means high-contrast image quality even when light conditions are poor. Ideal for use in badly illuminated interiors, or as rear-view camera. vehicle-construction.dometic-waeco.com

36 Interior surveillance cameras Safe and secure, outside and in WAECO PerfectView video system improve manœuvring safety. Our certified FVS 740X system has proven itself as a better alternative to a front mirror. Safety-relevant areas in vehicle interiors can be kept in view with our special cameras CAM 11 and CAM 12. With the matching accessories (connection boxes, video splitters, adapters) you can upgrade a conventional rear-view system into a complete outside-and-inside security package. Many drivers have come to appreciate this kind of support. 2 3 4 5 6 1 7 Bus I 1 2 3 4 Bus II Complete solution for buses covering the entrance areas and the rear (Bus I): The large 7" LCD monitor shows the full security programme. Two CAM 11 interior cameras monitor the entrance areas. Thanks to the video splitter, the images from both cameras are simultaneously displayed on the monitor. As soon as reverse gear is engaged, the CAM 80CM delivers pictures from the critical area behind the vehicle. Navigation system with additional interior surveillance function (Bus II): In our example a Blaupunkt CLX multimedia system was upgraded with two CAM 12 interior surveillance cameras. The retrofit worked a treat with the matching adapter cables from WAECO. Order list Bus I (complete solution) 1 PerfectView M 7LX 9102100008 s 2 PerfectView CAM 11 (incl. 20 m cable) 9102000052 3 PerfectView CAM 11 (incl. 20 m cable) 9102000052 4 PerfectView CAM 80CM (incl. 20 m cable) 9102000042 Adapters 5 ADAPT3 monitor adapter, new plug / old socket 9102200046 (6-pin mini DIN, grey cable) 6 ADAPT3 monitor adapter, new plug / old socket 9102200046 (6-pin mini DIN, grey cable) Video splitter 7 PerfectView VS 200 9102200036 Order list Bus II (navigation system) s 1 PerfectView CAM 12 (incl. 20 m cable) 9102000053 2 PerfectView CAM 12 (incl. 20 m cable) 9102000053 Adapters 3 ADAPT CLX adapter cable for Blaupunkt CLX monitor, 9102200111 5 m 4 ADAPT CLX adapter cable for Blaupunkt CLX monitor, 9102200111 5 m Contents, specifications and availability are subject to change serving the technical improvement.

Interior surveillance cameras 37 WAECO PerfectView CAM 11 3.19 Miniature dome camera 50 ø 59 ø 52 8.5 19 CCD camera (PAL) Very high resolution and light sensitivity Installed height of only 31 mm Wide-angle lens with large picture angle (125 diagonal) Ideal for use as interior surveillance camera Scope of delivery: miniature dome camera, 20 m monitor-to-camera connection cable, installation fittings for all components Technical data CAM 11 Dimensions (Ø x D) 78.5 x 50 mm (incl. built-in depth) Operating voltage 12 volts DC Power input approx. 1.2 watts Picture sensor 1/3" CCD sensor 310,000 pixels Picture angle 125 diagonal h: approx. 95 v: approx. 70 Light sensitivity 0.01 lux PAL Operating temperature 20 C to +50 C Vibration resistance 6 g 300 g Brightness adjustment electronic Type of protection equivalent to IP 67 ø 78.5 PerfectView CAM 11 9102000052 WAECO PerfectView CAM 12 3.19 LED dome camera 66 ø 93 6.5 CCD camera (PAL) with LED Very high resolution and light sensitivity LDR controlled IR-LEDs Wide-angle lens with large picture angle (125 diagonal) Can be used for interior surveillance or as rear-view camera Scope of delivery: LED dome camera, 20 m monitor-to-camera connection cable, installation fittings for all components Technical data CAM 12 Dimensions (Ø x D) 93 x 66 mm Operating voltage 12 volts DC Power input approx. 3.6 watts Picture sensor 1/3" CCD sensor 330,000 pixels Picture angle 125 diagonal h: approx. 95 v: approx. 70 Light sensitivity 0.01 lux or 0 lux with LED PAL Operating temperature 20 C to +60 C Vibration resistance 6 g 300 g Brightness adjustment electronic Type of protection equivalent to IP 67 PerfectView CAM 12 9102000053 Accessories for interior surveillance cameras 3.19 Item designation Page s M 7LX 7" LCD monitor 9102100008 43 M 59L 7" Heavy-duty LCD monitor 9102100010 43 System and extension cables System and extension cable 5 m 9102200028 33 System and extension cable 10 m 9102200029 33 System and extension cable 20 m 9102200030 33 Other accessories VS 200 Video splitter for WAECO cameras with PAL video standard 9102200036 33 SWITCH Up to three independently controllable cameras on a single monitor 9102200034 34 Cable adapters ADAPT3 adapter, new plug / old socket (6-pin mini DIN, grey cable) 9102200046 34 RV-ADAPT-NAV Adapter cable for navigation systems RV-ADAPT-NAV ADAPT CLX Adapter cable for Blaupunkt CLX monitor, 5 m 9102200111 System and extension cables are only required if the 20 m cable supplied with the camera is not long enough. One ADAPT3 adapter is required for each camera to be connected to the accessories specified in the table above (monitors, video splitter, switchbox, system and extension cables). If you have a navigation system with RCA cinch input, one RV-ADAPT-NAV adapter is required for each camera to be connected. For connection to Blaupunkt CLX monitors, one ADAPT CLX adapter is required for each camera. vehicle-construction.dometic-waeco.com

38 Heavy-duty reversing video system components Heavy-duty components for individual system solutions Trailers, semi-trailers, construction machinery, night-time operation: WAECO offers a comprehensive modular system of single components that can be flexibly combined to create custom-made solutions for specific vehicles and applications. Vibration, impact, moisture, dust: in addition to robust standard products, the range includes a wide choice of heavy-duty components designed for tough daily use on building sites and under extreme weather conditions. Equipped for extremes Heavy-duty design, high quality materials and perfect workmanship guarantee impeccable operation under extreme conditions. The PerfectView CAM 60 and CAM 60CM cameras, for instance, will even withstand a high-pressure cleaner jet. We recommend both ADR- camera versions for dangerous goods transport. HD components are suitable for: Contents, specifications and availability are subject to change serving the technical improvement.

Heavy-duty reversing video system components 39 Far-sighted investment policy Certified technology meets future requirements Private and public investors have an eye on upcoming legislation when taking their purchasing decisions. They set great store by certified quality, which in our case translates as video technology with excellent optical features for maximum safety and compliance with all relevant standards. A top priority is to extend the field of vision around the vehicle by minimising the blind spot area. Many customised solutions are based on certified products from the WAECO range. Here are a few examples. Certified safe-all-around package for municipal vehicles Thus equipped, the driver of the municipal vehicle has all safety-relevant areas in view and under control. The combination of the M 7LX monitor and the CAM 40 camera is certified according to the 2003/97/EC mirror directive of the European Union. The side camera CAM 60CM is ADR-approved and complies with protection class IP 69K. 2 1 5 3 4 Order list municipal vehicle package 1 PerfectView M 7LX 9102100008 s 2 PerfectView CAM 40 (incl. 5 m cable) 9102000047 3 PerfectView CAM 60CM (without system cable) 9102000040 4 PerfectView CAM 80CM (incl. 20 m cable) 9102000042 Cable 5 System and extension cable 10 m 9102200029 Robust video technology for agricultural machinery Harnessed performance: one high quality 5" LCD monitor + one ball camera monitoring the working space in front + one robust, IP 69K- rear-view camera each on the rear of the towing vehicle and the trailer. Thanks to the video splitter the images from both rearview cameras can be displayed simultaneously while reversing. 5 1 9 3 8 4 Order list tractor/trailer package 1 PerfectView M 5L 9102100006 s 2 PerfectView CAM 40 (incl. 5 m cable) 9102000047 3 PerfectView CAM 60CM (without system cable) 9102000040 4 PerfectView CAM 60CM (without system cable) 9102000040 Cables 5 System and extension cable 5 m 9102200028 6 System and extension cable 10 m 9102200029 7 Quick coupler CAB 38 for trailers 9102200101 8 System and extension cable 20 m 9102200030 Video splitter 9 PerfectView VS 200 9102200036 2 6 7 vehicle-construction.dometic-waeco.com

40 Heavy-duty reversing video system components Safe all around and in line with the law: custom solution for an excavator The 2006/42/EC machinery directive regulates the minimal visibility standards for construction vehicles. Additionally, the customer set great store by the optical features of the video equipment. Our solution: M 7LX plus CAM 40 (a combination certified according to the 2003/97/EC mirror directive), plus another two CAM 40 cameras. 2 5 Order list excavator package 1 PerfectView M 7LX 9102100008 1 6 3 7 4 s 2 PerfectView CAM 40 9102000047 3 PerfectView CAM 40 9102000047 4 PerfectView CAM 40 9102000047 Cables 5 Heavy-duty system and extension cable 20 m 9102200071 6 Heavy-duty system and extension cable 5 m 9102200069 7 Heavy-duty system and extension cable 10 m 9102200070 Seamless surveillance solution for a gantry crane The centrepiece of this safety solution is the heavy-duty monitor M 59L, which meets the vibration and impact resistance requirements defined in ISO 16750-3. Four cameras provide seamlessly coverage across the length of the gantry crane. The two video splitters connected in-between enable the monitor to simultaneously display the images from two cameras (3/5 or 2/4, depending on the direction of motion). 2 8 + 9 4 5 Order list gantry crane package 6 12 1 11 7 3 10 1 PerfectView M 59L 9102100010 s 2 PerfectView CAM 40 9102000047 3 PerfectView CAM 40 9102000047 4 PerfectView CAM 40 9102000047 5 PerfectView CAM 40 9102000047 Cables 6 System and extension cable 20 m 9102200030 7 System and extension cable 10 m 9102200029 8 System and extension cable 20 m 9102200030 9 System and extension cable 20 m 9102200030 10 System and extension cable 20 m 9102200030 Video splitters 11 PerfectView VS 200 9102200036 12 PerfectView VS 200 9102200036 Contents, specifications and availability are subject to change serving the technical improvement.

Heavy-duty reversing video system components 41 WAECO monitors, cameras and accessories for customised equipment 3.19 Item designation Page e s M 50R 5" CRT monitor 9102100009 42 M 5L 5" LCD monitor 9102100006 42 M 7LX 7" LCD monitor 9102100008 43 M 59L 7" Heavy-duty LCD monitor 9102100010 43 CAM 60 b/w heavy-duty camera, 120 wide-angle lens, IP 69K-approved, temperature controlled heater, 9102000024 44 microphone, without system cable, ADR- CAM 60CM heavy-duty camera, 120 wide-angle lens, IP 69K-approved, temperature controlled heater, 9102000040 44 microphone, without system cable, ADR- CAM 16 cylinder camera, 120 wide-angle lens, high light sensitivity, 20 m system cable, very compact RV-16 45 dimensions with separate mounting bracket, specially designed to be fitted in a drill hole CAM 30C ball camera, 120 wide-angle lens, LEDs for enhanced night-time vision, microphone, compact 9102000045 45 size, flexible mount, the ideal side camera CAM 40 ball camera, 130 wide-angle lens, LEDs for enhanced night-time vision, compact size, flexible mount, the ideal front camera 9102000047 45 Heavy-duty system and extension cables, ADR- Heavy-duty system and extension cable 5 m 9102200069 44 Heavy-duty system and extension cable 10 m 9102200070 44 Heavy-duty system and extension cable 20 m 9102200071 44 Trailer cables Heavy-duty spiral cable set SPK 150 for trailers incl. sockets, 4 m working length, 9102200031 46 heavy-duty design for towing vehicles with trailer or semi-trailer, especially suitable for commercial applications, incl. ready-to-use sockets (plug / jack) Heavy-duty spiral cable set SPK 160 for trailers incl. sockets, 4 m working length, 9102200077 46 heavy-duty design for towing vehicles with trailer or semi-trailer, especially suitable for commercial applications, incl. ready-to-use sockets (plug / jack) Quick coupler CAB 38 for trailers, 2 x 30 cm, light-duty design, ready-to-use with sockets 9102200101 45 System and extension cable CAB 39 for trailers with low coupling, 5 m, with ABS socket (12-volt model) 9102200110 46 Heavy-duty system cable, bulk cable without plug Bulk cable (cut to length), priced per metre RV-CABLE-HD Cable kits for towing vehicles with trailer and for tractor / trailer combinations Trailer cable kit for installation of an additional camera on vehicles with trailer 9102200040 31 Tractor cable kit for installation of a reversing video system on tractor / trailers 9102200039 32 Video splitter VS 200 Video splitter for WAECO cameras with PAL video standard 9102200036 46 Switchbox for 3 cameras SWITCH Up to three independently controllable cameras on a single monitor 9102200034 47 Cable adapters ADAPT1 adapter, new socket / old plug (6-pin mini DIN, black cable) 9102200042 47 ADAPT2 adapter, new socket / old plug (6-pin mini DIN, grey cable) 9102200043 47 ADAPT4 adapter, new socket / ITT plug 9102200051 47 Standard bodywork with fixed cable system Components required for TRAILER system installation Heavy-duty system and extension cable System camera Heavy-duty system and extension cable Additional camera Heavy-duty spiral cable set Heavy-duty system and extension cable Components required for TRACTOR system installation Heavy-duty system and extension cable System camera Heavy-duty system and extension cable Heavy-duty spiral cable set vehicle-construction.dometic-waeco.com

42 Heavy-duty reversing video system components WAECO PerfectView M 50R 3.19 5" CRT monitor compact and space-saving for heavy-duty applications 5" b/w CRT monitor For 12-volt and 24-volt operating voltage Two camera sockets (CCIR) Day / night adjustment of picture brightness, automatic or manual Switches on automatically or by manual operation Contrast / brightness adjustment Technical data M 50R Dimensions (W x H x D) 187 x 163 x 201 mm (incl. mount) Diagonal screen dimension 5" / 128 mm (visible picture) Operating voltage 11 to 32 volts DC Power input 12 watts 520 lines CCIR Operating temperature 20 C to +60 C Vibration resistance 4 g 1300 g Picture brightness 200 cd/m² 5" HEAVY DUTY 187 201 163 Scope of delivery: 5" b/w CRT monitor, sun blind, set of cables, monitor mount and installation fittings PerfectView M 50R 9102100009 WAECO PerfectView M 5L 3.19 5" LCD colour monitor good value for little money, top LCD technology 5" LCD colour monitor For 12-volt and 24-volt operating voltage Switches on automatically or by manual operation Automatic day / night adjustment 235,000 pixels 2 camera inputs with separate controls Image settings can be saved for either camera Loudspeaker USB port for recharging of MP3 players, etc. LED background illumination Technical data M 5L Dimensions (W x H x D) 144 x 128 x 120 mm (incl. mount) Diagonal screen dimension 5" / 128 mm (visible picture) Operating voltage 12 to 30 volts DC Power input 10 watts 235,000 pixels PAL / NTSC auto Operating temperature 20 C to +60 C Vibration resistance 5 g 300 g Picture brightness 400 cd/m² Dimmer automatic via LDR inputs 2 with signal recognition 5" AUDIO 144 128 120 Scope of delivery: 5" LCD colour monitor incl. Easylink monitor mount, set of cables for monitor, installation fittings for all components PerfectView M 5L 9102100006 Contents, specifications and availability are subject to change serving the technical improvement.

Heavy-duty reversing video system components 43 WAECO PerfectView M 7LX 3.19 High-quality 7" LCD colour monitor 7" LCD colour monitor For 12-volt and 24-volt operating voltage Switches on automatically or by manual operation Automatic day / night adjustment Adjustable distance marks 337,000 pixels 3 camera inputs with separate controls Image settings can be saved for either camera Loudspeaker USB port for recharging of MP3 players, etc. LED background illumination Technical data M 7LX Dimensions (W x H x D) 186 x 145 x 120 mm (incl. mount) Diagonal screen dimension 7" / 178 mm (visible picture) Operating voltage 12 to 30 volts DC Power consumption 12 watts 337,000 pixels PAL / NTSC auto Operating temperature 20 C to +60 C Vibration resistance 5 g 450 g Picture brightness 400 cd/m² Dimmer automatic via LDR inputs 3 with signal recognition 7" AUDIO 186 120 145 Scope of delivery: 7" LCD colour monitor incl. Easylink monitor mount, set of cables for monitor, installation fittings for all components PerfectView M 7LX 9102100008 WAECO PerfectView M 59L 3.19 High-quality 7" LCD monitor with connection box designed for heavy-duty applications 7" heavy-duty LCD monitor 7" HEAVY DUTY AUDIO For 12-volt and 24-volt operating voltage Mirrored or real-view picture function to be set for each camera input Two camera sockets (PAL / NTSC) Day / night adjustment of picture brightness Date and time display (can be switched off) Loudspeaker Adjustable distance marks (can be switched off) Infrared remote control LED background illumination Protection circuits according to ISO 16750-2 (overvoltage, reverse poling, short circuit, load dump) Vibration and impact resistance equivalent to ISO 16750-3 Connection box RV-SWITCH-59 Technical data M 59L Dimensions (W x H x D) 180 x 120 x 120 mm (incl. mount) Diagonal screen dimension 7" / 178 mm (visible picture) Operating voltage 11 to 30 volts DC Power input 12 watts 337,000 pixels PAL / NTSC auto Operating temperature 30 C to +65 C Vibration resistance 5 g 500 g Picture brightness 400 cd/m² Dimmer automatisch inputs 2 Connection box with additional device to filter out voltage peaks in vehicle supply circuit Technical data RV-SWITCH-59 Dimensions (W x H x D) 15 x 65 x 30 mm Operating voltage 11 to 32 volts DC 420 g 2 camera inputs, 1 AV input 180 120 120 Scope of delivery: 7" heavy-duty LCD colour monitor with mounting bracket, set of cables for monitor, connection box for monitor, installation fittings for all components, IR remote control PerfectView M 59L 9102100010 vehicle-construction.dometic-waeco.com

44 Heavy-duty reversing video system components WAECO PerfectView CAM 60 3.19 b/w-heavy-duty-, ADR- ADR PerfectView CAM 60 b/w HEAVY DUTY AUDIO IP 69K ADR With replaceable rockfall protection screen and non-corroding threaded connector for use under extreme conditions. Anodised and powder coated aluminium housing with protective cap in stainless steel Microphone Twin lens cap Temperature controlled permanent heater, 3 or 4 watts Water-proof threaded connectors Electronic brightness adjustment Wide-angle lens with large picture angle (120 diagonal) ADR-approved according to ISO 6722 and ISO FDIS 16750-3 Technical data CAM 60 Dimensions (W x H x D) Operating voltage Power input Picture sensor Picture angle Light sensitivity 80 x 75 x 62 mm (incl. mount) 11 to 16 volts DC approx. 4.8 watts (with heater) 1/3" SONY CCD 290,000 pixels 120 diagonal h: approx. 108 v: approx. 92 < 0.5 lux PAL Operating temperature 30 C to +65 C Vibration resistance Brightness adjustment Type of protection 10 g 300 g electronic via monitor IP 69K 80 62 75 Scope of delivery: b/w heavy-duty camera, stainless steel protective cap, camera mount, installation fittings for all components PerfectView CAM 60 9102000024 WAECO PerfectView CAM 60CM 3.19 heavy-duty camera, ADR- ADR HEAVY DUTY AUDIO IP 69K ADR With replaceable rockfall protection screen and non-corroding threaded connector for use under extreme conditions. Anodised and powder coated aluminium housing with protective cap in stainless steel Microphone Twin lens cap Temperature controlled permanent heater, 3 or 4 watts Water-proof threaded connectors Electronic brightness adjustment Wide-angle lens with large picture angle (120 diagonal) ADR-approved according to ISO 6722 and ISO FDIS 16750-3 Technical data Dimensions (W x H x D) Operating voltage Power input Picture sensor Picture angle Light sensitivity CAM 60CM 80 x 75 x 62 mm (incl. mount) 11 to 16 volts DC approx. 4.8 watts (with heater) 1/3" SONY CCD 290,000 pixels 120 diagonal h: approx. 108 v: approx. 92 < 1 lux PAL Operating temperature 30 C to +65 C Vibration resistance Brightness adjustment Type of protection 10 g 300 g electronic IP 69K 80 62 75 Scope of delivery: colour heavy-duty camera, stainless steel protective cap, camera mount, installation fittings for all components PerfectView CAM 60CM 9102000040 WAECO PerfectView Accessory 3.19 Heavy-duty system and extension cables, ADR- Features & functions 6-pole threaded connector, water-proof Extra-sturdy, reinforced design ADR- HEAVY DUTY ADR Heavy-duty system and extension cable 5 m 9102200069 Heavy-duty system and extension cable 10 m 9102200070 Heavy-duty system and extension cable 20 m 9102200071 Contents, specifications and availability are subject to change serving the technical improvement.

Heavy-duty reversing video system components 45 WAECO PerfectView CAM 16 3.19 cylinder camera for discreet mounting in Technical data CAM 16 bumpers, bus mirrors, etc. Dimensions (Ø x L) 30 x 46 mm (incl. mount) cylinder camera (PAL) Operating voltage 11 to 16 volts DC Power input approx. 1.0 watts Excellent light sensitivity Picture sensor 1/4" CCD sensor Can be fitted with or without mounting 270,000 pixels bracket Mounting bracket included in the Picture angle 150 diagonal h: approx. 102 v: approx. 73 delivery kit Light sensitivity < 1 lux Compact size PAL Wide-angle lens with large picture angle Operating temperature 20 C to +65 C (150 diagonal) Vibration resistance 6 g The ideal side camera 200 g Brightness adjustment electronic Type of protection equivalent to IP 68 Info: For connection to monitor models M 5L, M 7L and M 7LX, the ADAPT3 adapter is required. Scope of delivery: colour cylinder camera, mounting bracket, 20 m monitor-to-camera connection cable, installation fittings for all components 30 46 30 PerfectView CAM 16 RV-16 Optional extra: ADAPT3 monitor adapter, new plug / old socket (6-pin mini DIN, grey cable) 9102200046 WAECO PerfectView CAM 30C / CAM 40 3.19 PerfectView CAM 30C AUDIO IP 68 ball camera CAM 30C ball camera CAM 40 ball camera with very flexible mount for accurate alignment CCD camera (PAL) with LED Sturdy, water-proof aluminium housing Microphone (CAM 30C only) Electronic brightness adjustment LDR controlled IR-LEDs Wide-angle lens with large picture angle CAM 30C: The ideal side camera CAM 40: In combination with the M 7LX monitor certified for use as a front camera system according to 2003/97/EG mirror directive Technical data CAM 30C / CAM 40 Dimensions (W x H x D) 72 x 60 x 63 mm (incl. mount) Operating voltage 11 to 16 volts DC Power input approx. 1.8 watts Picture sensor 1/4" CCD sensor CAM 30C: 270,000 pixels CAM 40: 290,000 pixels Picture angle CAM 30C: 120 diagonal CAM 40: 130 diagonal h: approx. 90 v: approx. 70 Light sensitivity CAM 30C: < 1 lux or 0 lux with LED CAM 40: < 0.1 lux or 0 lux with LED PAL Operating temperature 20 C to +65 C Vibration resistance 8 g 200 g Brightness adjustment electronic Type of protection IP 68 PerfectView CAM 40 IP 68 60 Scope of delivery CAM 30C: colour ball camera, 20 m monitor-to-camera connection cable with threaded connectors, installation fittings for all components Scope of delivery CAM 40: colour ball camera, 5 m monitor-to-camera connection cable with threaded connectors, installation fittings for all components 72 63 PerfectView CAM 30C 9102000045 PerfectView CAM 40 9102000047 vehicle-construction.dometic-waeco.com

46 Heavy-duty reversing video system components WAECO PerfectView VS 200 3.19 35 130 118 Video splitter for WAECO cameras with PAL video standard* Displays the video images from two connected cameras on a single monitor activation via control signals, such as indicators or reverse gear Split mode or display of single camera image manually Technical data Dimensions (W x H x D) Operating voltage inputs Control inputs Display VS 200 130 x 115 x 35 mm 10 to 32 volts DC 2 External / switch Cam1 / Cam2 / Split 600 g * not for CRT systems Scope of delivery: video splitter with supply cable (1.0 m), operating instructions PerfectView VS 200 9102200036 WAECO PerfectView Accessories 3.19 Heavy-duty spiral cable set SPK 150 for trailers incl. sockets Features & functions Trailer cable, 4 metres, heavy-duty design, ready-to-use with sockets (plug / jack) For towing vehicles with trailer / semi-trailer Especially suitable for commercial applications Compatible with spiral cable RV-500SPK (up to 2009) Heavy-duty spiral cable set SPK 160 for trailers incl. sockets Heavy-duty spiral cable set SPK 150 9102200031 for trailers incl. sockets Prepared system connections (available as single parts): Socket with male system plug 9102200065 Socket with female system jack 9102200064 Features & functions Trailer cable, 4 metres, heavy-duty design, ready-to-use with sockets (plug / jack) For towing vehicles with trailer / semi-trailer Especially suitable for commercial applications Compatible with spiral cable RV-100SPK (up to 2009) Heavy-duty spiral cable set SPK 160 for trailers incl. sockets 9102200077 Quick coupler CAB 38 for trailers Features & functions Trailer cable 2 x 30 cm, light-duty design, ready-to-use with sockets Quick coupler CAB 38 for trailers 9102200101 System and extension cable CAB 39 for trailers with low coupling Features & functions Trailer cable, 5 metres, for trailers with low coupling With ABS socket (12-volt model) System and extension cable CAB 39 for trailers with low coupling, 5 m 9102200110 Contents, specifications and availability are subject to change serving the technical improvement.

Heavy-duty reversing video system components 47 PerfectView SWITCH connects what you want connected Using the switchbox you can connect up to three cameras to one monitor and control them individually! PerfectView SWITCH is compatible with almost any WAECO camera. The cameras can be activated either automatically or manually (e.g. the reversing camera via reverse gear, the side-mounted cameras via the indicator). with 2 cameras The M 5L LCD monitor has two camera sockets. You can connect, for example, a reversing camera and a front camera. SWITCH Turning 2 into 4 with PerfectView SWITCH The same monitor, thanks to the switchbox, now with up to four cameras: for example, a reversing camera, two side cameras (one each left and right), and an additional camera to monitor the working area WAECO PerfectView SWITCH 3.19 Switchbox for additional reversing video applications For running up to three independently controlled cameras from one monitor camera input 30 Features & functions s can be activated either automatically or manually (e.g. reversing cameras via reverse gear, side-mounted cameras via indicators) Power consumption: 0.84 watts max. (without cameras) Suitable for 12- and 24-volt vehicle electrics 130 57 Scope of delivery: switchbox, cable for connection to vehicle electrics, switch for manual activation of the cameras,switch box connection cable, fitting materials, installation and operating instruction PerfectView SWITCH 9102200034 WAECO PerfectView Accessories 3.19 Cable adapters ADAPT2 camera adapter Features & functions The two cable systems used by WAECO up to 2009 (black or grey) are replaced as of 2010 by a new, uniform cable system. Adapters for adapting installed cables when existing components are replaced by new ones; eliminate the need to re-lay cables Easy allocation to cable systems with colour-coded plug connectors Clear identification of suitable connections on the adapters More adapters available on request ADAPT1 camera adapter ADAPT4 camera adapter Cable adapters on WAECO LCD cables up to 2009 ADAPT2 camera adapter, new socket / old plug (6-pin mini DIN, grey cable) 9102200043 Cable adapters on WAECO CRT cables up to 2009 ADAPT1 camera adapter, new socket / old plug (6-pin mini DIN, black cable) 9102200042 Cable adapters on WAECO HD cables up to 2009 ADAPT4 camera adapter, new socket / ITT plug 9102200051 Note: Adapters are only required for connecting new monitors and cameras to older WAECO cable systems. Also feel free to contact the Dometic WAECO representation in your country. vehicle-construction.dometic-waeco.com