Robot Light V2 User Manual
2
Please read over this manual before operating the light. Introduction Unpacking: Thank you for purchasing the Robot Light V2. Every Robot Light V2 has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories which are necessary to operate the unit have arrived intactly. In the case damage has been found or parts are missing, please contact the manufacturer or your dealer for further instructions. Do not return this unit to your dealer without first contacting. Introduction: The Robot Light V2 is a DMX intelligent LED light. This light is light and compact which makes it a great piece for mobile DJ and clubs. Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs by yourself, otherwise it will void your manufactures warranty. In the unlikely event your unit 3
may require service please contact the manufacturer or your dealer. PLEASE recycle the shipping carton whenever possible. General Instructions To optimize the performance of this product, please read these operating instructions carefully to familiarize you with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference. Features Moving Head LED Beam/Wash Battery Powered & Wireless DMX Wireless Remote distance: 0-1000m Battery last life: Serves 3-18 hours (All Leds on, Auto running mode) Color: CREE LEDs RGBW / Red, Green, Blue, White (Optional: 5in1/6in1/7in1) Display: 1.77 TFT Voltage: AC100-240V, 50-60HZ Total power consumption: 69w Beam angle: Φ52 mm, 39 Fresnel lens. Spotlight and floodlight lens can be optional With casters and quick lock on the base, can be moved easily. X:Endless Rotating Scanning Y:270 DMX Channels : 10/12/14/20CH Dimensions: 1) 18.5*18.5*99CM [H(MIN)=99CM]; 2)18.5*18.5*220CM [H(MAX)=220CM] Weight: 17.9KG Safety Precautions To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. Do not spill water or other liquids into or on to your unit. Be sure that the local power outlet matches the required voltage of your unit. Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short circuit. Disconnect from main power before making any type of connection. Do not remove the cover under any conditions. There are no user serviceable parts inside. Never operate this unit when it s cover is removed. Never plug this unit in to a dimmer pack. Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 4
6 (15cm) between this device and a wall. Do not attempt to operate this unit, if it is damaged. This unit is intended for indoor use only, using this product outdoors will void all warranties. During a long period of non-use, disconnect the unit s main power. Always mount this unit in safe and stable matter. Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the point they exit from the unit. Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See Cleaning for details. Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, and other appliances (including amplifiers) that produce heat. The fixture should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged. B. Objects have fallen, or liquid has been spilled into the appliance. C. The appliance has been exposed to rain or water. D. The appliance does not appear to operate normally or exhibits a marked change in performance Fuse standard is 2A/250V Grounded using yellow/green line The ambient temperature must always be under +35 C Set Up Power Supply: Before plugging your unit in, be sure the source voltage in your area matches the required voltage of your Robot Light V2. The Robot Light V2 is workable in 95-240V/50~60Hz. Because line voltage may vary from venue to venue, you should be sure your unit voltage matches the wall outlet voltage before attempting to operate you fixture. DMX Linking: To ensure proper DMX data transmission, when using several DMX fixtures, try to use the shortest cable path possible. The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For example, a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain. Operating Instructions Operating Modes: You can use the Robot Light V2 in 6 ways: DMX control-this function will allow you to control each individual fixtures traits with a standard DMX 512 controller Infrared Remote-This unit can be remotely controlled by an infrared remote controller. Sound Active-The unit will be activated by the sound signal 5
Master/Slave-Set at the Master Mode, the unit can control other units set at the Slave Mode Endless Rotating Horizontal Motor Marquee Charge Indicator DMX Mode: Operating through a DMX controller gives users freedom to create their own programs tailored to their own individual needs. This function also allows you to use your fixtures as pattern changing lights. 1. This function will allow you to control each individual fixture s traits with a standard DMX 512 controller. 2. The The Robot Light V2 uses 10 / 12/14 /20CH channels to operate. Please see DMX Values and Functions for the DMX traits. 3. To run your fixture in DMX mode, plug in the fixture via the XLR connections to any standard DMX controller. Set your desired DMX address following the set up specifications that come with your DMX controller. 4. The unit can automatically recognize the DMX signal once the DMX connection is done. DMX Values and Functions Mode Channel Values 1CH RED 000-255 2CH GREEN 000-255 10CH 3CH BLUE 000-255 4CH WHITE 000-255 5CH X-axis Motor 000-255 6CH Y-axis Motor 0-200 (270 ) 6
200-255(to and fro rotating) 7CH Motor forward 000-255 8CH Motor reversal 000-255 Off 000-015 Auto1 016-025 Auto2 026-050 Auto3 051-075 9CH Auto Auto4 076-100 Auto5 101-125 Auto6 126-150 Auto7 151-175 Auto8 176-200 Auto9 201-255 1CH ALL 000-255 2CH RED 000-255 3CH GREEN 000-255 12CH 4CH BLUE 000-255 5CH WHITE 000-255 6CH Motor 000-255 7CH Gradual (speed) 000-255(From slow to fast) 1CH ALL 000-255 2CH RED 000-255 14CH 3CH GREEN 000-255 4CH BLUE 000-255 5CH WHITE 000-255 7
6CH Motor 000-255 7CH Strobe 000-255 1CH X-axis Motor 000-255 2CH Y-axis Motor 000-255 3CH Motor forward 000-255 4CH Motor reversal 000-255 5CH RED 1 000-255 6CH GREEN 1 000-255 7CH BLUE 1 000-255 8CH WHITE 1 000-255 9CH RED 2 000-255 10CH GREEN 2 000-255 20CH 11CH BLUE 2 000-255 12CH WHITE 2 000-255 13CH RED 3 000-255 14CH GREEN 3 000-255 15CH BLUE 3 000-255 16CH WHITE 3 000-255 17CH RED 4 000-255 18CH GREEN 4 000-255 19CH BLUE 4 000-255 20CH WHITE 4 000-255 Touch Buttons 8
There are four touch buttons under the LED display: Menu, Down, Up, Enter. Normally, the LED will display the current DMX address code of the fixture. At this time, press Menu to choose the function you want to set up. Press and hold Up or Down to fast scrolling within the menu options. When an option is flashing the LED display, press Enter to confirm and Menu to exit. 1. Press the MENU button and UP button or DOWN button until A001 is displayed, then press ENTER 2. Value 001-512 10CH Channel Set Channel Master Slave 12CH 14CH MAST SLAV Auto 000-010 Operation mode Fade 001-010 Sound 001-002 Red 000-255 Green 000-255 Blue Advanced adjustment 000-255 White 000-255 X-axis Motor 000-255 Y-axis Motor 000-255 wireless set Wireless 0FF/ON ID 000-015 IR 0FF/ON Language Set Chinese English 9
Version ON/OFF TRPRO-LB44IN1V.2-WBILD-MH 00H00M00S System Set Running time 00000Hour00Minute Power 001-100% Temperature Infrared remote control Operation mode To control the fixture you must aim the controller at the front of the fixture. To used the remote control, you must first activate the fixture s infrared receiver, To activate the fixture s infrared receiver you should press the button MAST on the remote control. When the display screen shows yes which means the light is on master mode, press Slav to chose the slave mode. 10
Cleaning Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried out periodically to optimize light output. 11
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing. 2. Clean the external optics with glass cleaner and a soft cloth every 20 days. 3. Always be sure to dry all parts completely before plugging the unit back in. Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue, dust, dew). Trouble Shooting Listed below are a few common problems the user may encounter, with solutions. Unit does not respond to DMX: 1. Check whether the DMX cables are connected properly and wired correctly (pin 3 is hot ; on some other DMX devices pin 2 may be hot ). Also, check whether all cables are connected to the right connectors; it does matter which way the inputs and outputs are connected. Unit does not respond to sound: 1. Quiet or high pitched sounds will not activate the unit. If problems are not resolved, contact your dealer for service. After-sales Policy (worldwide): All our product against defects in materials and workmanship for a period of ONE (1) YEAR from the date you received the goods. If a defect exists: (1) 7 Day Policy: Contact us, send pictures or video to show the problem within 7 days from the date received the goods. Send us back the defected products within 30 days, we will pay the shipping fee. Once we have received the defected light, we will replace a new one for you, product & shipping free of charge. Over 7 days, consider to the following (2) policy applicable. (2) 18 months Warranty: Contact us, send pictures or video to show the problem, send us back the defected products, customer bear the shipping cost. Once we have received the defected light, we will send out immediately a new light to replace it, Product and shipping free of charges. (3) Lifetime after-sale service and technical support. You may connect 5 of the Robot Light V2 at most each time. The above policy is not valid if customers connect them to any other high power equipments without consulting with manufacture first. 12
All our products have special mark on the fixture body. Customers are not allowed to open the fixtures. The above policy is not valid if customers open the fixtures by themselves without informing us first. Then customers can only get technical support only from us. Note: All information is subject to change without prior notice. 2016-04-o1 13