Drawer Slides by SALE Futura Soft lose Undermount Drawer Slides - A7555 Front locking clips required for drawer slides to function (sold separately). Rear mounting brackets optional depending on chosen installation method (sold separately). Sold Separately Length Extension losing Type Futura Soft lose Undermount Drawer Slides Max. abinet Depth - nside Min. abinet Depth - nside W tem # Salice tem # 12" [05.0mm] Full Smove Soft lose 14⅜" [65.1mm] 12 1 /16" [25.4mm] 165427 A7555/05P6 15" [81.0mm] Full Smove Soft lose 17 7 /16" [442.9mm] 15⅞" [40.2mm] 166764 A7555/81P6 18" [457.0mm] Full Smove Soft lose 20⅜" [517.5mm] 18⅞" [479.4mm] 160720 A7555/457P6 21" [5.0mm] Full Smove Soft lose 2⅜" [59.7mm] 21⅞" [555.6mm] 160721 A7555/5P6 Additional lengths available - 9" (229mm). Please contact our ustomer Support Team for more information. Front Locking lips & Rear Mounting Brackets for Futura Drawer Slides Description W tem # Salice tem # Front Locking lips - Left & Right (pair). Also available installed; for this option see Front Locking lips - Optional nstallation Notes. 160722 A710.610 Front Locking lips - Left & Right (pair). Also available installed; for this option see Front Locking lips - Optional nstallation Notes. 17067 A750.010 Rear Mounting Bracket (Socket) - Regular - 2" [50.8mm] wide, metal (pair)* 181004 AGSKX5 Rear Mounting Bracket (Socket) - Narrow - 1 7 /16" [6.5mm] wide, metal (pair)* 181005 AGSKXR5 * When mounting the brackets (used to support the drawer slides) to the cabinet back, the different width brackets provide flexibility when encountering different cabinet side thicknesses and the proximity of the cabinet side to the inside opening of face frame. A7555 with Front lips & Rear Brakets (Sold Separately) Front Locking lips (pair) - A710.610 Front Locking lips (pair) - A750.010 NHH1 - Drawer Box Notching Rear Mounting Bracket - Regular AGSKX5 Rear Mounting Bracket - Narrow AGSKXR5.2.1 For PRNG See Section.1 in our current Wholesale Pricing atalog. (Phone) 1-800-27-126 6:00AM - 4:0PM ST (24 Hour Fax) 1-608-781-667
Drawer Slides by SALE Hardware Options Ordering & Pricing Notes: Futura Soft lose Undermount Drawer Slides Ordering Guidelines 1 Order Forms Please use Hardware Order Form (E Z Form #1). Pricing 1 Pricing Please see Section.1 of our current Wholesale Pricing atalog. Technical Notes: Futura Soft lose Undermount Drawer Slides Hardware Options (hapter ) 1 Full Extension Smove soft close fully integrated in the runner. 2 Load apacity 75# Dynamic / 100# Static. Locking lips and Front locking clips and rear mounting brackets must be ordered separately. Mounting Brackets Salice Undermount Drawer Slides are only compatible with Salice Front Locking lips. Height adjustment (+mm) with A710.610 Front Locking lips. ompatible with all Futura slides. 4 Adjustability Drawer height (+2.5mm), depth (+/-2.0mm) and side (+/-1.5mm) adjustment with A750.010 Front Locking (With Front Locking lips) lips. ompatible with 2012 or later Futura slides. Screws needed to attach drawer slides to cabinet are sold separately. Eight #6 x ⅝ FHP wood screws required per pair (see Section.). 5 Screws Sold Separately Screws needed to attach front locking clips to drawer box are sold separately. Four #6 x ⅝ FHP wood screws required per pair (see Section.). Screws needed to attach rear mounting brackets to cabinet are sold separately. Two #6 x ⅝ FHP wood screws required per bracket (see Section.). 6 Technical nformation Please see www.saliceamerica for additional information and technical specifications. Drawer Box Options (hapter H) 1 Bottom Panel nset A 1mm bottom panel inset is required. 2 Drawer Box Notching Requires drawer box notching option NHH1. Sizes / Dimensions 1 Side Thickness ompatible with ½" [12.7mm] and ⅝" [15.9mm] drawer box side wall thicknesses only. 2 Minimum Width Minimum inside drawer width of 8" [20.2mm] when using either version of front locking clips. Drawer Box Depth 1 nstallation 2 Availability Other Front Locking lips (Release lips) Drawer box depth must match the slide length. ie: 12" [05.0mm], 15" [81.0mm], 18" [457.0mm], 21" [5.0mm]. Front Locking lips - Optional nstallation The Salice Front Locking lips (A710.610 or A750.010) required for the Futura Soft lose and Futura Push Undermount Drawer Slides can also be installed by Walzcraft. The drawer box must have a 1mm bottom panel inset and also include the NHH1 Notch & Hook Hole ombination. Available with assembled melamine and pre-finished wood drawer boxes only. Not available with RTA (Ready to Assemble) drawer boxes. Salice Undermount Drawer Slides are only compatible with Salice Front Locking lips. f ordering Blum Drawer Slide Locking Devices (Release lips) from Section.9, you will need to order Blum Drawer Slides separately. Front locking clips (release clips) vary by manufacturer. Walzraft can provide and install other brands upon request. The following information is required when ordering front locking clips (release clips) that are not inventoried by Walzraft: Brand and Model # of the drawer slide being used. Manufacturer s Part # of the Front Locking lips (Release lips), if available. For PRNG See Section.1 in our current Wholesale Pricing atalog. 99.7% American Made.2.2
Drawer Slides by SALE Futura Push Undermount Drawer Slides - A7557 Front locking clips required for drawer slides to function (sold separately). Rear mounting brackets optional depending on chosen installation method (sold separately). Sold Separately Length Extension losing Type Futura Push Undermount Drawer Slides Max. abinet Depth - nside Min. abinet Depth - nside W tem # Salice tem # 21" [5.0mm] Full Push 2⅜" [59.7mm] 21⅞" [555.6mm] 165444 A7557/5P6 Additional lengths available - 12" (05mm), 15" (81mm), 18" (457mm). Please submit requests to our ustomer Support Team. Front Locking lips & Rear Mounting Brackets for Futura Drawer Slides Description W tem # Salice tem # Front Locking lips - Left & Right (pair). Also available installed; for this option see Front Locking lips - Optional nstallation Notes. 160722 A710.610 Front Locking lips - Left & Right (pair). Also available installed; for this option see Front Locking lips - Optional nstallation Notes. 17067 A750.010 Rear Mounting Bracket (Socket) - Regular - 2" [50.8mm] wide, metal (pair)* 181004 AGSKX5 Rear Mounting Bracket (Socket) - Narrow - 1 7 /16" [6.5mm] wide, metal (pair)* 181005 AGSKXR5 * When mounting the brackets (used to support the drawer slides) to the cabinet back, the different width brackets provide flexibility when encountering different cabinet side thicknesses and the proximity of the cabinet side to the inside opening of face frame. A7557 with Front lips & Rear Brakets (Sold Separately) Front Locking lips (pair) - A710.610 Front Locking lips (pair) - A750.010 NHH1 - Drawer Box Notching Rear Mounting Bracket - Regular AGSKX5 Rear Mounting Bracket - Narrow AGSKXR5.2. For PRNG See Section.1 in our current Wholesale Pricing atalog. (Phone) 1-800-27-126 6:00AM - 4:0PM ST (24 Hour Fax) 1-608-781-667
Drawer Slides by SALE Hardware Options Ordering & Pricing Notes: Futura Push Undermount Drawer Slides Ordering Guidelines 1 Order Forms Please use Hardware Order Form (E Z Form #1). Pricing 1 Pricing Please see Section.1 of our current Wholesale Pricing atalog. Technical Notes: Futura Push Undermount Drawer Slides Hardware Options (hapter ) 1 The new Push opening system for handle-less drawers is fully integrated in the runner. A slight push on Push Undermount Slides the drawer front is sufficient for the drawer to self-open. 2 Full Extension Full extension runner. Load apacity 75# Dynamic / 100# Static. 4 Locking lips and Front locking clips and rear mounting brackets must be ordered separately. Mounting Brackets Salice Undermount Drawer Slides are only compatible with Salice Front Locking lips. Height adjustment (+mm) with A710.610 Front Locking lips. ompatible with all Futura slides. 5 Adjustability Drawer height (+2.5mm), depth (+/-2.0mm) and side (+/-1.5mm) adjustment with A750.010 Front Locking (With Front Locking lips) lips. ompatible with 2012 or later Futura slides. Screws needed to attach drawer slides to cabinet are sold separately. Eight #6 x ⅝ FHP wood screws required per pair (see Section.). 6 Screws Sold Separately Screws needed to attach front locking clips to drawer box are sold separately. Four #6 x ⅝ FHP wood screws required per pair (see Section.). Screws needed to attach rear mounting brackets to cabinet are sold separately. Two #6 x ⅝ FHP wood screws required per bracket (see Section.). 7 Technical nformation Please see www.saliceamerica for additional information and technical specifications. Drawer Box Options (hapter H) 1 Bottom Panel nset A 1mm bottom panel inset is required. 2 Drawer Box Notching Requires drawer box notching option NHH1. Sizes / Dimensions 1 Side Thickness ompatible with ½" [12.7mm] and ⅝" [15.9mm] drawer box side wall thicknesses only. 2 Minimum Width Minimum inside drawer width of 8" [20.2mm] when using either version of front locking clips. Drawer Box Depth 1 nstallation 2 Availability Other Front Locking lips (Release lips) Drawer box depth must match the slide length, i.e., 12" [05.0mm], 15" [81.0mm], 18" [457.0mm], 21" [5.0mm]. Front Locking lips - Optional nstallation The Salice Front Locking lips (A710.610 or A750.010) required for the Futura Soft lose and Futura Push Undermount Drawer Slides can also be installed by Walzcraft. The drawer box must have a 1mm bottom panel inset and also include the NHH1 Notch & Hook Hole ombination. Available with assembled melamine and pre-finished wood drawer boxes only. Not available with RTA (Ready to Assemble) drawer boxes. Salice Undermount Drawer Slides are only compatible with Salice Front Locking lips. f ordering Blum Drawer Slide Locking Devices (Release lips) from Section.9, you will need to order Blum Drawer Slides separately. Front locking clips (release clips) vary by manufacturer. Walzraft can provide and install other brands upon request. The following information is required when ordering front locking clips (release clips) that are not inventoried by Walzraft: Brand and Model # of the drawer slide being used. Manufacturer s Part # of the Front Locking lips (Release lips), if available. For PRNG See Section.1 in our current Wholesale Pricing atalog. 99.7% American Made.2.4
Drawer Slides by SALE Single Extension Epoxy oated Runners - A208 Rear mounting brackets optional depending on chosen installation method (sold separately). Sold Separately Single Extension Epoxy oated Runners Length Extension losing Type olor W tem # Salice tem # 18" [450.0mm] Single Self-losing White 160715 A208/45.1 20" [500.0mm] Single Self-losing White 160716 A208/50.1 22" [550.0mm] Single Self-losing White 160717 A208/55.1 Additional lengths available - 12" [00.0mm], 14" [50.0mm], 16" [400.0mm], 24" [600.0mm]. Please submit requests to our ustomer Support Team. Rear Mounting Brackets for Single Extension Runners Description W tem # Salice tem # Rear Mounting Bracket (Socket) for A208 drawer slide - Pair - ncludes one left and one right bracket. 181006 ASO208NANDR/L Ordering & Pricing Notes: Single Extension Epoxy oated Runners Ordering Guidelines 1 Order Forms Please use Hardware Order Form (E Z Form #1). Pricing 1 Pricing Please see Section.1 of our current Wholesale Pricing atalog. Technical Notes: Single Extension Epoxy oated Runners Hardware Options (hapter ) 1 Single Extension Single extension (/4), white epoxy coated self closing drawer slides. 2 Load apacity 75# Dynamic / 100# Static. Rear Mounting Brackets Rear mounting brackets must be ordered separately. 4 Screws Sold Separately Screws needed to attach drawer slides to cabinet are sold separately. Eight #6 x ⅝ FHP wood screws required per pair (see Section.). Screws needed to attach rear mounting brackets to cabinet are sold separately. Two #6 x ⅝ FHP wood screws required per bracket (see Section.). 5 Technical nformation Please see www.saliceamerica for additional information and technical specifications. Drawer Box Options (hapter H) 1 Drawer Box Notching Single extension epoxy coated runners do not require any drawer box notching. Sizes / Dimensions 1 Side Thickness ompatible with all drawer box side wall thicknesses..2.5 For PRNG See Section.1 in our current Wholesale Pricing atalog. (Phone) 1-800-27-126 6:00AM - 4:0PM ST (24 Hour Fax) 1-608-781-667
Drawer Slides - Side Mount Tru-Trac 100 Series Side Mount Drawer Slide Rear mounting brackets optional depending on chosen installation method (sold separately). KNAPE & VOGT Technical Support 1-800-25-1561 Tru-Trac 100 Series Side Mount Drawer Slides Length Actual Length Extension losing Type olor W tem # Tru-Trac tem # 18" 17¾" (450.0mm) Full Positive Stop Zinc 172207 KVTT100 B18 20" 19¾" (500.0mm) Full Positive Stop Zinc 172208 KVTT100 B20 22" 21¾" (550.0mm) Full Positive Stop Zinc 172209 KVTT100 B22 Additional lengths available - 10" [250.0mm], 12" [00.0mm], 14" [50.0mm], 16" [400.0mm], 24" [600.0mm], 26" [650.0mm], 28" [700.0mm]. Please contact our ustomer Support Team for more information. Rear Mounting Brackets for Tru-Trac Drawer Slides Description W tem # Tru-Trac tem # Rear Mounting Bracket - 2 7 /16" [61.9mm] W x 1⅞" [47.6mm] H x ½" [88.9mm] L, metal (pair) 181007 KVTT401 Advice on hoosing The orrect Hardware for your Project Making the right choices when selecting hardware is crucial to the success of most woodworking projects. The cabinet hardware (hinges, mounting plates, slides, etc.) shown in this catalog is very specialized in terms of how it will attach to components and cabinets, and how it will function in day to day use for years to come. Because selecting the correct hardware is such an important decision, Walzraft recommends that you leave nothing to chance. f in doubt about how a specific piece of hardware will function, our recommendation is to order the hardware in question and trial mount it in the exact way you intend to use it. Since Walzraft is not on site with you building your project, it is very difficult for us to make the final call as to whether a piece of hardware is the right choice for your project, this important decision is your sole responsibility. Hardware is most easily and confidently chosen when you have used a specific piece of hardware before, and are totally familiar with how it functions, as well as how to properly install and adjust it. f you believe that a particular piece of hardware is what you need, but you have no experience with it, you should do a trial mount using the hardware in the exact way you intend for your project. Walzraft offers a 0% discount on hardware used for trial mounting. The discount applies to the pieces you will need to mount 1 door or 1 drawer box. As an example, to trial mount one door you might need 2-hinges, 2-mounting plates, and the screws. All items needed for the trial mount are eligible for the 0% discount. t is important to check Quotes, Order Acknowledgments and Order Price Acknowledgments for accuracy. Please double check all paperwork and help us get your order filled correctly the first time. Please note that Walzraft paperwork includes the following reminder message: Because selecting the correct hardware is such an important decision, Walzraft recommends that you leave nothing to chance. f in doubt about how a specific piece of hardware will function, our recommendation is to order the hardware in question and trial mount it in the exact way you intend to use it. Since Walzraft is not on site with you building your project, it is very difficult for us to make the final call as to whether a piece of hardware is the right choice for your project, this important decision is your sole responsibility. For technical support, please contact hardware manufacturers at the phone numbers or websites provided throughout hapter in our Product Specifications atalog and our current Wholesale Pricing atalog. Walzraft will not be liable for replacement of manufactured product or hardware if found that it is not compatible..4.1 (Phone) 1-800-27-126 6:00AM - 4:0PM ST (24 Hour Fax) 1-608-781-667
Drawer Slides - Side Mount Hardware Options Ordering & Pricing Notes: Tru-Trac Side Mount Drawer Slides Ordering Guidelines 1 Order Forms Please use Hardware Order Form (E Z Form #1). Pricing 1 Pricing Please see Section.1 of our current Wholesale Pricing atalog. Technical Notes: Tru-Trac Side Mount Drawer Slides Hardware Options (hapter ) 1 Tru-Trac 100 A smart & economical choice for a 100# class, full extension ball-bearing slide solution. Features a non-handed design. Zinc Finish. Telescopic movement on steel ball-bearings, delivers a smooth operation. A positive stop bumper provides an anti-rebound feature. Lever disconnect for easy drawer removal. 2 Full Extension Full extension runner. Side Mounting Side mounting for frame and frameless construction. 4 Load apacity Load apacity: 100-pound class. 5 Rear Mounting Brackets Rear mounting brackets for face frame installation must be ordered separately. Screws needed to attach rear mounting brackets to cabinet are sold separately. Two #6 x ⅝ FHP wood screws required per bracket (see Section.). Will fit left or right installation. Face Frame Mounting Holes. 2mm and Traditional Hole Patterns. 6 Screws ncluded Screws needed to attach drawer slides to cabinet are included. omes with twelve #7x12P wood screws. 7 Technical nformation Please contact Knape & Vogt at 1-800-25-1561 for additional information and technical support. Drawer Box Options (hapter H) 1 Drawer Box Notching Does not require any drawer box notching. Sizes / Dimensions 1 Side Thickness ompatible with all drawer box side wall thicknesses. 2 Side learance ndustry standard side clearance: ½" [12.7mm] + 1 /2 / -0". Slide Height Height: 1 25 /2" [45.0mm]. For PRNG See Section.1 in our current Wholesale Pricing atalog. 99.7% American Made.4.2
Drawer Slides by blum TANDEM plus BLUMOTON Undermount Drawer Slides - 56H Locking devices are required for drawer slides to function (sold separately). Rear mounting brackets are optional depending on chosen installation method (sold separately). Sold Separately Blum Technical Support: 1-800-48-6788 www.blum Drawer Length Extension TANDEM plus BLUMOTON Undermount Drawer Slides - 56H losing Type Maximum abinet Depth with Rear Bracket Maximum Minimum Runner Length W tem # Blum tem # 9" [229.0mm] Full BLUMOTON Soft lose 11 25 /2" (299.0mm) 10 15 /2" (266.0mm) 10 /16" (259.0mm) 174009 56H2290B10 12" [05.0mm] Full BLUMOTON Soft lose 14 9 /16" (70.0mm) 12 29 /2" (28.0mm) 12 9 /16" (19.0mm) 174010 56H050B 15" [81.0mm] Full BLUMOTON Soft lose 17 9 /16" (446.0mm) 15 29 /2" (404.0mm) 15 9 /16" (95.0mm) 174011 56H810B 18" [457.0mm] Full BLUMOTON Soft lose 20 9 /16" (522.0mm) 18 29 /2" (480.0mm) 18 17 /2" (471.0mm) 174012 56H4570B 21" [5.0mm] Full BLUMOTON Soft lose 2 19 /2" (599.0mm) 21 15 /16" (557.0mm) 21 9 /16" (548.0mm) 17401 56H50B rear mounting brackets (face frame only) slides / runners locking devices Undermount Drawer Slide omponents NHH1 - Drawer Box Notching.9.1 For PRNG See Section.1 in our current Wholesale Pricing atalog. (Phone) 1-800-27-126 6:00AM - 4:0PM ST (24 Hour Fax) 1-608-781-667
Drawer Slides by blum Hardware Options Ordering & Pricing Notes: TANDEM plus BLUMOTON Undermount Drawer Slides Ordering Guidelines 1 Order Forms Please use Hardware Order Form (E Z Form #1). Pricing 1 Pricing Please see Section.1 of our current Wholesale Pricing atalog. Technical Notes: TANDEM plus BLUMOTON Undermount Drawer Slides Hardware Options (hapter ) 1 Full extension, concealed drawer runners with BLUMOTON soft closing and TANDEM smooth running TANDEM / BLUMOTON action. 2 Load apacity 100 lbs. static load capacity. Locking Devices & Blum Undermount Drawer Slides are only compatible with Blum locking devices. Mounting Brackets Locking devices and rear brackets must be ordered separately. 4 Adjustability Four-Dimensional adjustment. Elongated holes for depth adjustment. 5 Screws Sold Separately Screws needed to attach drawer slides to cabinet are sold separately. Eight #6 x ⅝ FHP wood screws required per pair (see Section.). Screws needed to attach front locking clips to drawer box are sold separately. Four #6 x ⅝ FHP wood screws required per pair (see Section.). Screws needed to attach rear mounting brackets to cabinet are sold separately. Three #6 x ⅝ FHP wood screws required per bracket (see Section.). 6 Technical nformation Please see www.blum or call Blum at 1-800-48-6788 for additional information and technical support. Drawer Box Options (hapter H) 1 Bottom Panel nset A 1mm bottom panel inset is required. 2 Drawer Box Notching Requires drawer box notching option NHH1. Sizes / Dimensions 1 Side Thickness 1mm (½") to 16mm (⅝") drawer box material thickness. 2 Minimum Width Slide Lengths 4 Drawer Box Depth Minimum inside drawer width of 6 11 /16" [170.0mm] when using front locking clips T51.1901 L/R. Minimum inside drawer width of ¾" [95.0mm] when using front locking clips T51.0801.20 L/R. Slides are available in 9" [229.0mm] to 21" [5.0mm] lengths in " [76.0mm] increments for face frame or panel (frameless) cabinets. Drawer box depth must match the slide length, i.e., 9" [229.0mm], 12" [05.0mm], 15" [81.0mm], 18" [457.0mm], 21"[5.0mm]). 1 nstallation 2 Availability Other Locking Devices (Release lips) Locking Devices - Optional nstallation The Blum Locking Devices (T51.1901 L/R or T51.0801.20 L/R) required for the TANDEM plus BLUMOTON Undermount Drawer Slides can also be installed by Walzcraft. The drawer box must have a 1mm bottom panel inset and also include the NHH1 Notch & Hook Hole ombination. Available with assembled melamine and pre-finished wood drawer boxes only. Not available with RTA (Ready to Assemble) drawer boxes. Blum Undermount Drawer Slides are only compatible with Blum Locking Devices. f ordering Salice Drawer Slide Front Locking lips (Release lips) from Section.2, you will need to order Salice Drawer Slides separately. Locking Devices (release clips) vary by manufacturer. Walzraft can provide and install other brands upon request. The following information is required when ordering front Locking Devices (release clips) that are not inventoried by Walzraft: Brand and Model # of the drawer slide being used. Manufacturer s Part # of the Front Locking lips (Release lips), if available. For PRNG See Section.1 in our current Wholesale Pricing atalog. 99.7% American Made.9.2
Drawer Slides by blum Blum Locking Device for Undermount Drawer Slides 1 Ordering Please use Hardware Order Form (E Z Form #1). One right and one left required per drawer. 2 Pricing Please see Section.1 of our current Wholesale Pricing atalog. ompatibility For use with 56 series runners only. 4 nstallation Available installed on assembled melamine & pre-finished wood drawer boxes with NHH1 only. 5 Self Aligning aptive right device and self aligning left device. 6 Adjustability Height adjustment of +⅛" [.0mm]. Side adjustment of +/- 1 /16" [1.5mm]. Self-adjusting drawer length tolerance. 7 Screws Sold Separately Requires four #6 x ⅝" wood screws per pair (Section.). 8 Materials Steel base with synthetic, spring loaded release levers. 9 Minimum Size Minimum inside drawer width of 6 11 /16" [170.0mm]. Blum Locking Device for Undermount Drawer Slides - Narrow (Limited Space) Drawer 1 Ordering Please use Hardware Order Form (E Z Form #1). One right and one left required per drawer. 2 Pricing Please see Section.1 of our current Wholesale Pricing atalog. ompatibility For use with 56 series runners only. 4 Load apacity Maximum dynamic load capacity 25 lb. 5 nstallation Available installed on assembled melamine & pre-finished wood drawer boxes with NHH1 only. 6 Bottom Panel nset Designed for ½" (1mm) drawer bottom recess. 7 Adjustability Height adjustment of +⅛" (mm). Self-adjusting drawer length tolerance. 8 Screws Sold Separately Requires four #4 x ⅝" wood screws per pair (Section.). 9 Materials Vertical mount, two-piece nylon. 10 Minimum Size Minimum inside drawer width of ¾" (95.0mm). Front of drawer box must be a minimum of ⅝" (16.0mm) thick. W tem #172566 W tem #177527 Rear Mounting Bracket for Undermount Drawer Slides (Face Frame abinet Only) 1 Ordering Please use Hardware Order Form (E Z Form #1). Sold in pairs. W tem #181008 2 Pricing Please see Section.1 of our current Wholesale Pricing atalog. ompatibility For use when installing TANDEM 56 series runners only, in face frame cabinets. Not for use with 9" [229.0mm] runners. Not necessary for frameless (panel) cabinet installation. 4 Adjustability Lateral self-alignment ⅛" (.0mm). 5 Screws Sold Separately Use at least three #6 wood screws per bracket (Section.). 6 Materials Non-handed, one-piece stamped steel design, zinc-coated..9. For PRNG See Section.1 in our current Wholesale Pricing atalog. (Phone) 1-800-27-126 6:00AM - 4:0PM ST (24 Hour Fax) 1-608-781-667
Drawer Slides by blum Hardware Options TANDEM Template 1 Ordering Please use Hardware Order Form (E Z Form #1). One right and one left required per drawer. 2 Pricing Please see Section.1 of our current Wholesale Pricing atalog. 56 Series TANDEM Runners Essential tool for drawers using 56 series TANDEM runners. 4 6mm Diameter Holes Used to bore the 6mm diameter holes for rear hooks. 5 2.5mm Diameter Holes Used to pre-bore the 2.5mm diameter holes for TANDEM locking devices at the required angle. 6 Drill Bits Does not include drill bits. W tem #174015 TANDEM plus BLUMOTON Undermount Drawer Slide Accessories Description W tem # Blum tem # Front Locking Device - Left & Right (pair) 172566 T51.1901 L/R Front Locking Device - Narrow Drawer - Left & Right (pair) 177527 T51.0801.20 L/R Rear Mounting Bracket - For Face Frame abinet (pair) 181008 295.750.02 TANDEM Template 174015 T65.1600.01 Advice on hoosing The orrect Hardware for your Project Making the right choices when selecting hardware is crucial to the success of most woodworking projects. The cabinet hardware (hinges, mounting plates, slides, etc.) shown in this catalog is very specialized in terms of how it will attach to components and cabinets, and how it will function in day to day use for years to come. Because selecting the correct hardware is such an important decision, Walzraft recommends that you leave nothing to chance. f in doubt about how a specific piece of hardware will function, our recommendation is for you to order a sample of the hardware in question and trial mount it in the exact way you intend to use it. Since Walzraft is not on site with you building your project, it is very difficult for us to make the final call as to whether a piece of hardware is the right choice for your project, this important decision is your sole responsibility. Hardware is most easily and confidently chosen when you have used a specific piece of hardware before, and are totally familiar with how it functions, as well as how to properly install and adjust it. f you believe that a particular piece of hardware is what you need, but you have no experience with it, you should do a trial mount using the hardware in the exact way you intend for your project. Walzraft offers a 0% discount on hardware used for trial mounting. The discount applies to the pieces you will need to mount 1 door or 1 drawer box. As an example, to trial mount one door you might need 2-hinges, 2-mounting plates, and the screws. All items needed for the trial mount are eligible for the 0% discount. t is important to check Quotes, Order Acknowledgments and Order Price Acknowledgments for accuracy. Please double check all paperwork and help us get your order filled correctly the first time. Please note that Walzraft paperwork includes the following reminder message: Because selecting the correct hardware is such an important decision, Walzraft recommends that you leave nothing to chance. f in doubt about how a specific piece of hardware will function, our recommendation is to order the hardware in question and trial mount it in the exact way you intend to use it. Since Walzraft is not on site with you building your project, it is very difficult for us to make the final call as to whether a piece of hardware is the right choice for your project, this important decision is your sole responsibility. For technical support, please contact hardware manufacturers at the phone numbers or website provided throughout hapter in our Product Specifications atalog and our current Wholesale Pricing atalog. Walzraft will not be liable for replacement of manufactured product or hardware if found that it is not compatible. For PRNG See Section.1 in our current Wholesale Pricing atalog. 99.7% American Made.9.4