ulletin 87 Plastic Face/Plastic arrel or ickel-plated rass arrel ulletin 87 inductive proximity sensors are self-contained, general purpose, solid-state devices designed to sense the presence of ferrous and non-ferrous metal objects without touching them. The switch body consists of a plastic face and either a nickel-plated brass barrel or plastic barrel. The electronic circuitry is potted for protection against shock, vibration, and contamination. These sensors are available in 3, 4, 5, 6.5, 8, 2, 8 and 30mm diameters, with smooth or threaded barrels. onnection options include a 2m cable, micro quick-disconnect, and pico quick-disconnect. Features able or quick-disconnect styles Short circuit protection Overload protection Transient noise protection False pulse protection Reverse polarity protection E marked for all applicable directives (most models) Styles 2-Wire Full-Featured... page 270 2-Wire Plastic arrel... page 273 D 3-Wire Plastic arrel... page 275 D 3-Wire Small Diameter. page 277 Extended Temperature Range D 3-Wire............... page 280 MUR Intrinsically Safe.. page 282 nalog........... page 285 ccessories Quick-Disconnect ables... page 5 onduit daptors........ page 287 Mounting rackets, Spring Return Style...... page 288 Mounting rackets, Swivel/Tilt Style......... page 290 Mounting rackets, Right ngle Style........ page 29 Mounting rackets, lamp Style............ page 292 End aps.............. page 298 Mounting uts.......... page 299 Lock Washers........... page 220 General Information Torque hart............ page 2203 Metric/English onversion hart......... page full-featured and D models only. 269
87 2-Wire Full Featured Plastic Face/Threaded ickelplated rass arrel Specifications 87 able Style 8, 30mm page 27 87 Mini Quick-Disconnect Style 2, 8, 30mm page 27 87 Micro Quick-Disconnect Style 2, 8, 30mm page 27 arrel Diameter urrent Minimum urrent Inrush urrent ( cycle) Leakage urrent Operating Voltage Voltage Drop Repeatability Hysteresis False Pulse Protection Transient oise Protection Short ircuit Protection Overload Protection pprovals Enclosure onnections Operating Temperature Shock Vibration 250m 5m 2..7m at 20V 40250V 2mm 8mm 400m 4 5V at 250m, 5V at 400m 0V at 0m 0V at 0m 0% at constant temperature 0% typical UL listed, S certified, and E marked for all applicable directives EM, 2, 3, 3R, 4, 4X, 6, 6P, 2, 3 IP67 (IE 529) ickel plated brass barrel able: 2m (6.5ft) length 2-conductor PV Quick Disconnect: 3-pin micro style 3-pin mini style Red: energized Green: Power/Short ircuit (Flashing) 25 to +70 (3 F to +58 F) 30g, ms 55Hz, mm amplitude, 3 planes Features 2-wire operation 2-conductor or 3-pin connection 40250V ormally open or normally closed output Short circuit, false pulse, overload, and transient noise protection UL listed, S certified, and E marked for all applicable directives orrection Factors Target Material orrection Factor Steel.0 Stainless Steel 0.9 rass 0.5 luminum 0.45 opper 0.4 270
87 2-Wire Full Featured Plastic Face/Threaded ickel-plated rass arrel Selection Guide atalog umber arrel ominal Sensing Distance t Switching Diameter Shielded onfiguration Frequency (Hz) able Style Mini QD Style Micro QD Style 2mm 2 (0.08) 08) 8mm 5(020) (0.20) 30mm 0 (0.39).O. 30 87223 8722R3.. 20 87223 8722R3.O. 30 87582 87583 8758R3.. 20 87582 87583 8758R3.O. 30 870302 870303 87030R3.. 20 870302 870303 87030R3 Recommended Standard QD ordset (6F =.8m (6ft), 2 = 2m (6.5ft)) 889F3F6F 889RF32 QD ordsets and ccessories Page umber Other ordsets vailable 58, 544 Mounting rackets 288 292 End aps 298 Mounting uts 299 2200 27
87 2-Wire Full Featured Plastic Face/Threaded ickelplated rass arrel Dimensions able Style s Wiring Diagram ormally Open ormally losed 2m (6.5ft) rown Green/ellow rown Green/ellow D ote: can be switched to brown wire. Thread Size Shielded D M8 X 8.0 (0.7) 70.5 (2.78) 57.5 (2.26) 0.8 (0.03) M30 X.5 30.0 (.8) 77.4 (3.05) 63.4 (2.50) 0.8 (0.03) Mini QD Style ormally Open or ormally losed 7/86un2a s D 2 3 Ground ote : o ground wire on 2mm. ttach housing to ground. ote 2: can be switched to pin 3. Thread Size D M2 X 2.0 (0.47) 83.3 (3.28) 37.5 (.48) M8 X 8.0 (0.7) 72.5 (2.85) 52.4 (2.06) 0.8 (0.03) M30 X.5 30.0 (.8) 86.5 (3.4) 62.6 (2.47) Micro QD Style ormally Open or ormally losed s D 3 2 Ground /220UF2 ote : o ground wire on 2mm. ttach housing to ground. ote 2: can be switched to pin 2. Thread Size D M2 X 2.0 (0.47) 85.3 (3.36) 38. (.50) M8 X 8.0 (0.7) 80.3 (3.6) 56.7 (2.23) 0.8 (0.03) M30 X.5 30.0 (.8) 85.7 (3.37) 62.6 (2.47) 272
87 2-Wire Plastic Face/Threaded Plastic arrel 87 able Style 8, 30mm page 274 Features 2-wire operation 2-conductor connection 24250V ormally open or normally closed output Transient noise protection E marked for all applicable directives Specifications arrel Diameter urrent Inrush urrent ( cycle) Leakage urrent Operating Voltage Voltage Drop Hysteresis Transient oise Protection pprovals Enclosure onnections Operating Temperature Shock Vibration 80m..7m 24250V orrection Factors Target Material orrection Factor Steel.0 Stainless Steel 0.70.8 rass 0.40.5 luminum 0.30.4 opper 0.30.4 8mm V 20% typical E marked for all applicable directives EM, 2, 3, 4, 4X, 2, 3 IP67 (IE 529) Plastic barrel able: 2m (6.5ft) length 2-conductor PV Red: energized 25 to +55 (3 F to +3 F) 30g, ms 55Hz, mm amplitude, 3 planes 300m 3 30mm 273
87 2-Wire Plastic Face/Threaded Plastic arrel Selection Guide arrel ominal Sensing Distance t Switching Diameter Shielded onfiguration Frequency (Hz).O. 5 (0.20).. 8mm.O. 8(03) (0.3).. 8.O. 0 (0.39).. 30mm.O. 5 (0.59).. atalog umber able Style 875S8 87D5S8 878R8 87D8R8 870S30 87D0S30 875R30 87D5R30 ccessories Page umber Terminal hambers 59 Mounting rackets 288 292 End aps 298 Mounting uts 299 2200 Dimensions able Style 2m (6.5ft) Wiring Diagram ormally Open ormally losed lack lack ote: can be switched to black wire. D Thread Size M8X M30 X.5 Shielded D 80(07) 8.0 (0.7) 80(39) 8.0 (3.9) 60(240) 6.0 (2.40) 20(008) 2.0 (0.08) 300(8) 30.0 (.8) 80(39) 8.0 (3.9) Unshielded proximity sensors require a metal-free zone around the sensing face. ny metal immediately opposite the sensing face should be no closer than 3 times the rated nominal sensing distance of the sensor. 274
87 3-Wire D Plastic Face/Threaded Plastic arrel 87 D able Style 2, 8, 30mm page 276 Features 3-wire operation 3-conductor connection 030V D ormally open or normally closed output Transient noise, short circuit and reverse polarity protection E marked for all applicable directives Specifications arrel Diameter urrent Leakage urrent Operating Voltage Voltage Drop Repeatability Hysteresis Transient oise Protection Reverse Polarity Protection Short ircuit Protection pprovals Enclosure onnection Operating Temperature Shock Vibration orrection Factors Target Material orrection Factor Steel.0 Stainless Steel 0.70.8 rass 0.40.5 luminum 0.30.4 opper 0.30.4 2mm 50m 200m 0µ 030V D 2.2V 5% 20% Typical E marked for all applicable directives EM, 2, 3, 4, 4X, 2, 3 IP67 (IE 529) Plastic barrel able: 2m (6.5ft) length 3-conductor PV Red: Energized 25 to +55 (3 F to +3 F) 30g, ms 55Hz, mm amplitude, 3 planes 8, 30mm 275
87 3-Wire D Plastic Face/Threaded Plastic arrel Selection Guide arrel ominal Sensing Distance t Switching Diameter Shielded onfiguration Frequency (Hz) P 2mm 4 (0.6) O.O. 25 PP 8mm 30mm 5(020) (0.20) O.O. 8(03) (0.3) O.O. 0 (0.39).. 5 (0.59) O.O. P PP P PP P PP 00 atalog umber able Style 874R2 87P4R2 875S8 87P5S8 878R8 87P8R8 87J0S30 87K0S30 P 00 875R30 PP 87P5R30.. P 87J5R30 ccessories Page umber Terminal hambers 59 Mounting rackets 288 292 Mounting uts 299 2200 Dimensions able Style D Wiring Diagram ormally Open 2m (6.5ft) + P (Sinking) + PP (Sourcing) 030V D 030V D rown rown + + lack lack ormally losed + P (Sinking) 030V D rown + lack + PP (Sourcing) 030V D rown + lack Thread Size Shielded D M2 X 2.0 (0.47) 60.0 (2.36) 40.0 (.58) M8X M30X5.5 80(07) 8.0 (0.7) 80(39) 8.0 (3.9) 300(8) 30.0 (.8) 80(39) 8.0 (3.9) 60(240) 6.0 (2.40) 2.0 (0.08) Unshielded proximity sensors require a metal-free zone around the sensing face. ny metal immediately opposite the sensing face should be no closer than 3 times the rated nominal sensing distance of the sensor. 276
Specifications Inductive Proximity Sensors 87 3-Wire D Plastic Face/Small Threaded or Smooth ickel-plated rass arrel 87 D able Style Smooth arrel 3, 4, 6.5mm page 278 87 D able Style Threaded arrel 4, 5mm page 278 87 D Pico Quick-Disconnect Style Smooth arrel 4, 6.5mm page 278 87 D Pico Quick-Disconnect Style Threaded arrel 5mm page 278 Features 3-wire operation 3-conductor, 3-pin or 4-pin connection 030V D ormally open or normally closed output False pulse, transient noise, reverse polarity and short circuit protections (most models) E marked for all applicable directives (except for 3mm models) arrel Diameter urrent Leakage urrent Operating Voltage Voltage Drop Repeatability Hysteresis False Pulse Protection Transient oise Protection Reverse Polarity Protection Short ircuit Protection pprovals Enclosure onnections Operating Temperature Shock Vibration orrection Factors Target Material orrection Factor Steel.0 Stainless Steel 0.70.8 rass 0.40.5 luminum 0.30.4 opper 0.30.4 3, 4mm 5, 6.5mm 00m 200m 0.m 030V D 2.5V 5% 5% typical o (most models) E marked for all applicable directives (except for 3mm models) EM, 2, 3, 4, 2, 3 IP67 (cable only) IP65 (qd only) (IE 529); ickel-plated brass barrel able: 2m (6.5ft) length 3-conductor PV Quick-Disconnect: 3-pin pico style Red or ellow: energized 25 to +70 (3 F to +58 F) 30g, ms 55Hz, mm amplitude, 3 planes 277
87 3-Wire D Plastic Face/Small Threaded or Smooth ickel-plated rass arrel Selection Guide arrel arrel ominal Sensing Distance t Diameter Type mm (in) Shielded onfiguration Switching Frequency (Hz) able Style atalog umber Pico QD Style 3mm Smooth 0.6 (0.02) 02) O.O. P PP 3000 87DM3E2 87DMP3E2 4mm Smooth 08(003) 0.8 (0.03) O.O. P PP 3000 87DM4E2 87DM4P3 87DMP4E2 4mm Threaded 06(002) 0.6 (0.02) O.O. P PP 3000 87D4E2 87DP4E2 5mm Threaded (004) (0.04) O.O. P PP 3000 87D5E2 87DP5E2 87D5P3 87DP5P3 6.5mm Smooth 5(006).5 (0.06) O.O. P PP 000 87DM7E2 87DMP7E2 87DM7P3 87DMP7P3 Recommended Standard QD ordset (2 = 2m (6.5ft)) 889PF32 QD ordsets and ccessories Page umber Other ordsets vailable 552 Terminal hambers 59 Mounting rackets 288 292 End aps 298 Mounting uts 299 2200 278
87 3-Wire D Plastic Face/Small Threaded or Smooth ickel-plated rass arrel Dimensions able Style Smooth 2m (6.5ft) Threaded 2m (6.5ft) + Wiring Diagram P (Sinking) 030V D rown + lack ormally Open PP (Sourcing) + 030V D rown + lack ormally losed P (Sinking) PP (Sourcing) + + 030V D 030V D rown rown + + lack lack Smooth Diameter Thread Size Shielded 3.0 3.0 (0.2) 22.0 (0.87) 4.0 4.0 (0.6) 25.0 (0.98) M4 x 0.5 4.0 (0.6) 22.0 (0.87) M5 x 0.5 5.0 (0.20) 25.0 (0.98) 6.5 6.5 (0.26) 32.3 (.27) Pico QD Style ormally Open P (Sinking) D 4 3 + + 030V D PP (Sourcing) Smooth Threaded + 4 3 + 030V D Smooth Diameter Thread Size Shielded D 4.0 4.0 (0.6) 38.0 (.50) 9.0 (0.74) M5 x 0.5 5.0 (0.20) 38.0 (.50) 23.0 (0.90) 6.5 6.5 (0.26) 50.4 (.98) 279
87 3-Wire D Extended Temperature Plastic Face/Threaded ickel-plated rass arrel 87 D able Style 2, 8, 30mm page 28 87 D Micro Quick-Disconnect Style 2, 8, 30mm page 28 ulletin 87 inductive proximity sensors are self-contained, solid state devices designed for most industrial applications where it is required to sense the presence of metal objects without touching them. These special extended temperature models are ideal for industrial environments where temperatures can reach as high as 22F (00) or as low as 40F (40). They are available for current source (PP) operation with a normally open output. Each switch has a plastic face and a nickel-plated brass housing which meet EM, 2, 3, 4, 2, 3 and IP67 (IE 529) enclosure standards. The electronic circuitry is potted for protection against shock, vibration, and contamination. These sensors are available in 2, 8, and 30mm diameters. onnection options include: 2m (6.5ft) PUR cable or micro quick-disconnect (4 pin, keyway). Specifications urrent Leakage urrent Operating Voltage Voltage Drop Repeatability Hysteresis False Pulse Protection Transient oise Protection Reverse Polarity Protection Short ircuit Protection Overload Protection pprovals Enclosure onnections Operating Temperature Shock Vibration 200m 0µ 030V D 2.4V 0% 5% typical E marked for all applicable directives EM, 2, 3, 4, 2, 3, IP67 (IE 529 ) ickel-plated brass barrel able: 2m (6.5ft) length 3-conductor PUR Quick-Disconnect: 4-pin micro style Orange: Energized 40 to +00 (40 F to +22 F) 30g, ms 55Hz, mm amplitude, 3 planes Features 3-wire operation 3-conductor or 4-pin connection 030V D Extended temperature range ormally open output Short circuit, false pulse, reverse polarity, overload and transient noise protection E marked for all applicable directives orrection Factors Target Material orrection Factor Steel.0 Stainless Steel 0.9 rass 0.5 luminum 0.45 opper 0.4 280
87 3-Wire D Extended Temperature Plastic Face/Threaded ickel-plated rass arrel Selection Guide arrel ominal Sensing Distance t Switching atalog umber Diameter Shielded onfiguration Frequency (Hz) able Style Micro QD Style 2mm 2 (0.08) 2000 87DT2P2U2 87DT2P2D4 O.O. PP 4 (0.6) 000 87DT4P2U2 87DT4P2D4 8mm 5 (0.20) 000 87DT5P8U2 87DT5P8D4 O.O. PP 8 (0.3) 500 87DT8P8U2 87DT8P8D4 30mm 0 (0.39) 500 87DT0P30U2 87DT0P30D4 O.O. PP 5 (0.59) 300 87DT5P30U2 87DT5P30D4 Recommended Standard QD ordset (2 = 2m (6.5ft)) 889DF42 QD ordsets and ccessories Page umber Other ordsets vailable 526 Terminal hambers 59 Mounting rackets 288 292 End aps 298 Mounting uts 299 2200 Dimensions able Style 2m (6.5ft) Wiring Diagram ormally Open + PP (Sourcing) 030V D rown + lack D Thread Size Shielded D M2X 40.0 (.57) 20(047) 2.0 (0.47) 34.0 (.34) 6.0 (0.24) M8X 40.0 (.57) 80(07) 8.0 (0.7) 400(57) 40.0 (.57) 32.0 (.26) 8.0 (0.3) M30X5.5 40.0 (.57) 300(8) 30.0 (.8) 28.0 (.2) 2.0 (0.47) Micro QD Style M2 X D ormally Open PP (Sourcing) 2 3 4 + 030V D + Thread Size Shielded D M2X 40.0 (.57) 20(047) 2.0 (0.47) 34.0 (.34) 6.0 (0.24) M8X 40.0 (.57) 80(07) 8.0 (0.7) 600(236) 60.0 (2.36) 32.0 (.26) 8.0 (0.3) M30X5.5 40.0 (.57) 300(8) 30.0 (.8) 28.0 (.0) 2.0 (0.47) 28
87 2-Wire MUR ickel-plated rass arrel, Plastic Face 87 MUR able Style 8, 2, 8, 30mm page 283 87 MUR Micro Quick-Disconnect Style 8, 2, 8, 30mm page 283 For llen-radley MUR style sensors, the sensor input and output conforms to MUR specifications (DI 9 234) allowing these sensors to be used with any approved MUR style amplifier/ isolator. llen-radley s MUR style sensors are Intrinsically Safe when used with an approved Intrinsically Safe MUR style isolator. The 87 MUR style family of sensors can be used in lass I, II, III; Division and 2; Groups,,, D, E, F, and G as well as Zones 0,, 2; Groups II, II, II when used with llen-radley s MUR style isolators/amplifiers. Installation must be in accordance with the ational Electrical ode, SI/IS RP2.6, or per other regulations by authority having jurisdiction over the installation site as appropriate. Features 2-Wire MUR operation 8, 2, 8, and 30mm sizes Short barrel length Shielded and Unshielded models FM, S, and EELE (KEM) approved Specifications s urrent Target Present urrent Target bsent Operating Voltage Ripple Voltage Repeatability Hysteresis Reverse Polarity Protection False Pulse Protection Transient oise Protection Short ircuit Protection Overload Protection Enclosure pprovals orrection Factors Target Material orrection Factor Steel.0 Stainless Steel 0.70.8 rass 0.40.5 luminum 0.30.4 opper 0.20.3 ÁÁÁÁÁÁ Entity ParametersÁÁÁÁÁÁ Sensor arrier ÁÁÁÁÁÁÁÁÁÁÁ V max 6V V ÁÁÁÁÁÁÁÁÁÁÁ t I max 60m I ÁÁÁÁÁÁÁ t i 50 n F ÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁ a 200µH L i onnections Operating Temperature Shock Vibration Housing Material MUR (conforms to DI 9 234) <m >3m 55V D (8.2V D nom., Ri = kohm, DI 9 234) <5% <0% 0% typical Realized in amplifier Realized in amplifier Realized in amplifier Realized in amplifier EM 4, IP67 (IE 529) FM approved lass I, II, III; Divisions, 2; Groups,,, D, E, F, G lass I; Zone 0,, 2; Groups II, II, II; T6 S approved lass I, II, III; Divisions, 2; Groups,,, D, E, F, G lass I; Zone 0,, 2; Groups II, II, II EELE (KEM) approved Groups II, II, II; Zones 0,, 2 (EEx ia II T6) E marked for all applicable directives able: 2m (6.5ft) length 2 conductor #22WG PV Quick-Disconnect: 4-pin micro style one 25 to 60 (3F to 40F) 30g, ms 55Hz, mm amplitude, 3 planes ickel-plated brass barrel, plastic face L a! WRIG: These parameters must be adhered to. If not, injury may be caused to person or property. 282
87 2-Wire MUR, able Style ickel-plated rass arrel, Plastic Face Selection Guide atalog umbers arrel ominal l Sensing Distance t Switching Diameter Shielded onfiguration Frequency (Hz) able Style Micro QD Style (0.03) 2000 87DHM82 87DHM8D4 8mm 2 (0.06) 000 87DH2M82 87DH2M8D4 2mm 8mm 30mm 2 (0.08) 2000 87DH2M22 87DH2M2D4 4 (0.6) MUR 000 87DH4M22 87DH4M2D4 5 (0.20) DI 9 234 000 87DH5M82 87DH5M8D4 8 (0.3) 500 87DH8M82 87DH8M8D4 0 (0.39) 500 87DH0M302 87DH0M30D4 5 (0.59) 300 87DH5M302 87DH5M30D4 Recommended Standard QD ordset (2 = 2m (6.5ft)) Intrinsically Safe wiring labels 897HL or 897HL2 must be applied every 7.6m (25ft). 889DF42 QD ordsets and ccessories Page umber Other ordsets vailable 526 Terminal hambers 59 MUR mplifiers/isolators 557 Intrinsic Safety Wiring Labels 558 Mounting rackets 288 292 End aps 298 Mounting uts 299 2200 Dimensions able Style 2m (6.5ft) Wiring Diagram rown + To MUR Galvanic Isolator Thread Size Shielded M8x 8.0 (0.3) 5.0 (0.20) M2x 20(047) 2.0 (0.47) 300(8) 30.0 (.8) 6.0 (0.24) M8x 80(07) 8.0 (0.7) 8.0 (0.3) M30x5.5 300(8) 30.0 (.8) 400(57) 40.0 (.57) 2.0 (0.47) 283
87 2-Wire MUR ickel-plated rass arrel, Plastic Face Dimensions Micro QD Style Wiring Diagram ormally Open PP (Sourcing) M2 X D 2 + 3 4 To MUR Galvanic Isolator Thread Size Shielded D 28.0 (.0) M8x 8.0 (0.3) 23.0 (0.9) 5.0 (0.20) M2x 20(047) 2.0 (0.47) 500(97) 50.0 (.97) 30.0 (.8) 24.0 (0.94) 6.0 (0.24) M8x 80(07) 8.0 (0.7) 30.0 (.8) 22.0 (0.87) 8.0 (0.3) M30x5.5 300(8) 30.0 (.8) 600(236) 60.0 (2.36) 40.0 (.57) 28.0 (.0) 2.0 (0.47) 284
87 nalog, 3-Wire D Plastic Face/ickel-Plated rass arrel 87 able Style 2, 8, 30mm ulletin 87 inductive proximity sensors are self-contained, solid-state devices designed to sense the presence of metal objects without touching them. This special version provides a 00V sourcing analog output proportional to the sensing distance. This device is enclosed by a plastic face and a nickel-plated brass housing which meets EM, 2, 3, 4, 2, 3 and IP67 (IE 529) enclosure standards. The electronic circuitry is potted for protection against shock, vibration and contamination. This sensor is available in 2, 8 and 30mm diameters with a 2m (6.5ft.) PV cable connection. Features 3-wire operation 830V D Short circuit, overload, reverse polarity, and transient noise protection 00V sourcing analog output E marked for all applicable directives Specifications nalog urrent Operating Voltage Repeatability Ripple Slew Rate / Distance Linearity Tolerance Temperature Tolerance Transient oise Protection Reverse Polarity Protection Short ircuit Protection Overload Protection Enclosure onnections Operating Temperature Shock Vibration orrection Factors Target Material orrection Factor Steel.0 Stainless Steel 0.70.8 rass 0.40.5 luminum 0.30.4 opper 0.20.3 2mm 8mm 30mm 00V Sourcing 5m 830V D % 0%.0V/ms 0.25mm/V 6.25% 0.3V 0.7V/ms 03.75mm/V 0.V/ms 0.875mm/V EM, 2, 3, 4, 2, 3; IP67 (IE 529), ickel-plated brass barrel, plastic face (PT) able: 2m (6.5ft) length 3 conductor PV one 25 to +70 (3F to +58F) 30g, ms 55Hz, mm amplitude, 3 planes 285
87 nalog, 3-Wire D Plastic Face/ickel-Plated rass arrel Selection Guide arrel Linear Sensing Distance Switching Diameter Shielded onfiguration Frequency (Hz) atalog umber 2mm 0.52.5 (0.020.0) nalog Voltage Sourcing 00 87D3P2E2 8mm 4 (0.040.6) nalog Voltage Sourcing 00 87D4P8E2 30mm 74 (0.270.55) nalog Voltage Sourcing 30 87D4P30E2 QD ordsets and ccessories Page umber Terminal hambers 59 Mounting rackets 288 292 End aps 298 Mounting uts 299 2200 Dimensions 2m (6.5ft) Thread Size 2mm 2 (0.47) 8mm 8 (0.7) 70 (2.75) 80 (3.5) 30mm 30 (.8) 58 (2.28) Wiring Diagrams 2mm 8mm 30mm + rown + rown nalog nalog lack lack 830V D 830V D I I I lack nalog + rown 830V D ominal 2mm 8mm 30mm 9V 9V 9V 0.25mm/V 0.375mm/V 0.875mm/V V V V 0.5mm 2.5mm mm 4mm 7mm 4mm Distance to Target Distance to Target Distance to Target 286